General :: ODIN 3.07 Not Flash In CWM Recovery Mode In Samsung Galaxy Neo GT - S5310
Apr 20, 2014
I'm following step by step process to root my gt-s5310 using ODIN 3.07. Started from download mode and connect to the PC is no problem at all. ODIN finished with the GREEN PASS. When I tried to open recovery mode, only android recovery mode is open(but malfunctioning, going no where when I press the home button) that recovery mode also don't has "install zip from sd card" option.
My android version is 4.1.2 . Baseband version S5310DXAME2. Kernel version 3.0.15-1521875 se.infra@SWDA2309#1
Attached is the recovery mode picture
View 5 Replies
Apr 28, 2014
I am currently trying to repair a soft bricked(stuck in boot loop) Samsung Galaxy S2 (T-Mobile) . I am trying to save the info (contacts,sms,pictures..etc). Would using Odin to flash CWM Recovery and doing a nandroid backup and then restoring the phone to factory settings. Would it somehow save everything in the internal memory and fix the phone?
View 2 Replies
View Related
Apr 18, 2012
I have a question about the files being used to flash my Samsung Galaxy S2 via Odin.
I have already seen this link [URL]...
I am trying to flash the PDA, Phone and CSC back all to normal stock. I have downloaded a firmware and I only have one file with a .dll file. The one file I have is named "I9100BOKK1_I9100TMUKK1_I9100BOKJ1_HOME.tar.md 5" I have extracted the files from here also and it contains boot.bin, cache.img, factoryfs.img, hidden.img, modem.bin, param.lfs, Sbl.bin and zImage.
How with these files and Odin do I flash all three parts. I can't see how to use these files on the above link with instructions for flashing and rooting.
View 1 Replies
View Related
Jul 11, 2012
I bought my Galaxy Ace S5830i last month. I hadn't installed Samsung Kies until yesterday, when I launched it it prompted a firmware upgrade. First I tried to use kies to upgrade but whenever the upgrade process started (Kies started downloading the firmware files) my device automatically got disconnected..I tried reinstalling kies, restarting my phone but nothing worked.
I then decided to use odin(v1.87) to flash the firmware on my device but it kept failing at first step itself. Here's what it said :-
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iXXLF3_S5830iODDLF1_RST_S5830iDDLF1_HOME.tar. md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
[Code] .....
The phone has been working as fine as ever. Kies never got to the step of INSTALLING the new firmware as whenever it started downloading the firmware files my phone got disconnected so no damage there.
With ODIN I entered download mode but here too it fails at the beginning, so I just switch off my phone and restart it and it works as if nothing ever happened (I've made several attempts)
View 1 Replies
View Related
Nov 30, 2013
I've read a lot of topics in online and also saw a lot of video tutorial to Flash my Galaxy Y's stock ROM with odin.In Odin,I've selected every file but whenever I click 'Start' button,it shows me this message in message box.
<ID:0/010>Added!!
<ID:0/010>Odin v.3 engine (ID:10)..
<ID:0/010>File analysis..
<ID:0/010>SetupConnection..
But I can't flash my phone.Now what can I do?
View 4 Replies
View Related
Jun 10, 2013
I tried to upgrade my P3100 to Slim-p3100-4.2.2.build.6-OFFICIAL following the tutorial i found.
Result of this is that now tablet is non more able to enter either CWM recovery nor odin download mode and after normal boot i can only see a flashing Slim logo on the right part of the screen.
The best i am able to obtain is a "forced upload by key pressing" screen rebooting with all three buttons pressed.Odin can see the device but when i try to re-upload cwm is stits in Establishing connection.
View 7 Replies
View Related
Aug 11, 2013
I looked all around google and I could not find a way to root it except for the OneClickRoot thing but it failed. How to root it?
View 1 Replies
View Related
Feb 14, 2012
I bricked actually my phone.
I want to know now, wich is actually the best Android 4.0.3 ROM.
I know how to flash via zip and via odin.
I dont know how to flash kernel
I wanna use a Android 4.0.3 ROM with DarkKnights or Siyah Kernel, tell me what you think about it.
First flash the ROM then Kernel?
View 6 Replies
View Related
Jun 22, 2013
Boot loop. I don't care if I get my S2 working again or not, but I NEED the files on my internal storage! I have a Mac and a PC, both with ADB installed, but no matter if I'm in recovery, or Odin Download Mode, I can not access my device via ADB. Is there anything I missed out, or is it just not possible at all, and the only thing I can do is wiping it?
View 1 Replies
View Related
Oct 20, 2013
how to FLASHING my Galaxy Mini without ODIN (via PC). because my pc didn't detect my phone. me already try on windows XP, Seven, and Eight. i dont know why this is happen.
my point is.. i just want to flash my galaxy mini without PC/ODIN.
View 4 Replies
View Related
Mar 7, 2012
I just OV galaxy by setcpu but have problem phone was stopped working. So i need ROM stock version VietNam or CM7 for retry up ROM flash by odin.
View 1 Replies
View Related
Oct 6, 2012
I have the dead android with the red triangle on the recovery mode, I upgraded to jellybean 4.1.1 but some reason KIES reads my phone as being SGH I 747, so I factory whiped and reset, reinstalled 4.1.1. My original issue was when I wanted to sign into certain apps the phone would vibrate and then the app would crash and I would have to start over or not use the app! I tried to install a correct jellybean 4.1.1 into the phone hoping to fix the issues but I cant do anything, Now there is a dead android with a red triangle no clue what that is! When I tried to install another zip I get verification failed in recovery mode.
View 2 Replies
View Related
May 1, 2013
How to install cwm recovery,to flash rom and any available custom roms for this phone...
my phone is a galaxy s3 clone
Model number
GT-I9300
Baseband version
MAUI.11AMD.W12.22.SP.V5,2012/10/23 14:35
Kernel version
3.0.13
root@nebula#1
SMP PREEMPT Mon Jan 21 16:59:34 CST 2013
Build number
APLS.ICS2.MP.V1
Custom build version
004120121
View 3 Replies
View Related
Apr 23, 2010
Alright this may have been asked a few times, or maybe it could not of been asked. I just can't find the thread related to answering this question.
Okay so my question is, can I flash Galaxo 1.6.2 or GAOSP "without" ODIN flashing or updating my firmware to 1.6? and not then what consequences would occur if I don't flash firmware update before GALAXO 1.6.2 flash. My phone firmware version is I7500ZHJA1 and I believe that is the latest firmware for my region which is still Android 1.5.
View 13 Replies
View Related
Oct 13, 2013
my galaxy s2,it is rooted,and i have another problem : the phone restarts by itself and gets stucked in the boot loop, i never flashed a new rom ,it is running the stock rom,Someday i needed to factory reset the phone so i rebooted into recovery mode (power + home button +vol up) ,. I booted into recovery mode but the power button does NOT react as 'select' button although it works just fine for power on and off. I select a function and press [power] an the first line becomes the selected. pushing it again just flashed the screen. But pressing it long turns the phone off,and even after the factory reset from phone directly(with out going to recovery mode)
View 5 Replies
View Related
Feb 9, 2011
My samsung i5500 wont boot normally so I want to try booting it into recovery and resting it. I've tried power, center key and volume down. which I thought was the recovery combination but it just comes up with an icon saying downloading and does nothing. Any recovery combination or another way to fix.
View 9 Replies
View Related
Apr 21, 2014
why this smartphone can't enter to recovery mode nor download mode, whereas i had done correctly.
View 2 Replies
View Related
Sep 23, 2013
Baseband version - I8552DDAMH1. GT-I8552
How do i install CWM Recovery on my unrooted Galaxy Grand Quattro using Odin v3?
View 4 Replies
View Related
Feb 9, 2013
I tried flashing a stock Android 4.2 JB ROM that seems legit. After flashing, I rebooted my device and saw the standard Nexus boot animation. So far, I though all was well. It's not. My phone has been stuck in this constant booting state for hours. I pulled the battery after an appropriate amount of waiting and held down the power and volume down+up button. Instead of booting into Fastboot mode, it went straight to Odin Mode. All I can do with my device is boot to Odin Mode or watch the Nexus boot animation over and over again.
View 1 Replies
View Related
Apr 5, 2014
I want to request a rom or mod for galaxy y neo s5310,
View 1 Replies
View Related
Apr 4, 2012
I have a Samsung SGH-I897. I was trying to flash from Froyo to GB using odin. I did not root it (I guess I was thinking I didn't need to from stock to another stock fw). It's bricked. I bought a JIG, but nothing happens, just black screen.
View 6 Replies
View Related
Jan 29, 2014
Today itself i downloaded and tried to flash my S DUOS 2 with stock ROM on Odin v1.85. Though it started and was in initial stage( Flashing boot file), i mistakenly DISCONNECTED the device. Now it's not turning ON !!!!
Device : Samsung Galaxy S Duos 2 S7582
Firmware : S7582XXUAMK3 ODDAMK1
Odin - v1.85
Mistake - Disconnected the device while it was downloading the firmware.
Device Status : Not Switching ON ! , Nothing happens when power key/+ any key is pressed
View 3 Replies
View Related
Nov 6, 2013
i had custom PMP light rom installed on my device. i then wanted to install SilverNexus kernel given here:URL.... so downloaded it & flashed it via CWM recovery
after that it keeps boot looping, also cant enter into CWM recovery. can't even install old kernel via Odin. odin is not detecting it anymore.somehow if i can replace my old kernel files read many threads. seems like Heimdall....but i m getting "ERROR: Failed to initialise protocol!" wen trying to generate pit file
View 1 Replies
View Related
Apr 6, 2014
I recently bought a Pearl Touchlet X10 quad core (PX-8880-675) tablet, but it was full of mods and when i plugged in the charger i received the "plugged in, not charging" message. So i started to clean up the ROM. Finally it showed charging, but now i really messed it up, beacuse now it is not booting. The tablet was not factory software, another tablet software on it that has a volume rocker. To start the flash mode i need the volume up button, but this version of tablet does not have this button. I tried the home button version, but it is not working because of the different firmware.
Here's the thing:The tablet always starts recovery mode, no screen, but adb working. When i type "ls /dev/block" in ADB shell it shows loop0-loop7 and nandf, so it is not seeing the nand I have seen other forums that when I type "dd if=/dev/zero of=/dev/block/nanda" it will erase the nand, and the tablet is force booting into fel mode (flash mode), but it not erasing beacuse the recovery is not for this tablet and it not seeing the nand.
View 2 Replies
View Related
Oct 29, 2010
I guess im one of the luck ones that has a Bell Galaxy S that cant go into recovery mode with the power+ volume buttons.
View 2 Replies
View Related
Apr 24, 2012
I deleted /system folder on my nexian cosmic journey. And now my nexian is stuck...
I try to using fastboot mode to flash recovery image, but my device seems not detected. I already installed the android composite driver, but when i use "fastboot devices" command, it shows (?) So how the heck to get my nexian back to normal?..
Or perhaps, if i just be able to put back the /system folder to its place again, it would be more easy to recover it... But how access the root when phone is like that?
View 1 Replies
View Related
Mar 5, 2014
I have the Samsung Galaxy Tab 3, 7" (WIFI-ONLY).
Firstly, let's start by saying that I ended up rooting it after a while because it got boring having the simple, unmodified android.
It seems creativity got the best of me, and I ended up wanting to switch back to my normal android days. The problems started when I looked for the ways to upgrade my device, and it sais my device had been modified (rooted). So then I tried deleting SuperSU, thinking that would unroot, but nope... I then went to my great friend, we all know as Google. I then found the firmware, however didn't notice it said 3G, not just WIFI.... and loaded it onto my tablet following the instructions leading me to use Odin. I now have a Samsung Galaxy Tab 3 WIFI only, with 3G Firmware.
After countless hours, days, and now weeks of trying to get it back to the normal firmware, all my attempts result in an error on Odin, and here's what I get:
First, I just load the .md5 file, and this happens.
---
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T210XXAMK5_T210OLBAMK1_T210XXAMK5_HOME.tar.md5 is valid.
[Code] ....
Now, what do I do to get my precious tablet back to normal? , since I have the 3G version, I'm required to have a sim card which I can't put in because there's no sim card slot (it's a WIFI tab). I can't even use WiFi, because it won't turn on without a SimCard.
View 2 Replies
View Related
Sep 23, 2011
I have a Galaxy S Vibrant i installed a rom and my phone crashed I'm trying to get into recovery mode pressing both volume buttons and power bottom at the same time but is not working. if there is another way to get into recovery mode.
View 2 Replies
View Related
Aug 29, 2013
I have a Galaxy S2 GT-I9100 with PacRom nightly 2013-08-28. After flashing this version, I can't reboot into RECOVERY MODE. I can entry only in Download Mode or turn it on normally
I'd like to flash the previous version to restore the functionality of my device but I don't know how...
I have not found a custom rom flashable by Odin....and I'm not sure my pc have driver of my device...
In sd-card I have Dorimanx Kernel but....I can't flash it!!
View 1 Replies
View Related
Feb 25, 2014
I have the Samsung Galaxy Tab 3, 7" (WIFI-ONLY).
Firstly, let's start by saying that I ended up rooting it after a while because it got boring having the simple, unmodified android.
It seems creativity got the best of me, and I ended up wanting to switch back to my normal android days. The problems started when I looked for the ways to upgrade my device, and it sais my device had been modified (rooted). So then I tried deleting SuperSU, thinking that would unroot, but nope... I then went to my great friend, we all know as Google. I then found the firmware, however didn't notice it said 3G, not just WIFI.... and loaded it onto my tablet following the instructions leading me to use Odin. I now have a Samsung Galaxy Tab 3 WIFI only, with 3G Firmware.
After countless hours, days, and now weeks of trying to get it back to the normal firmware, all my attempts result in an error on Odin, and here's what I get:
First, I just load the .md5 file, and this happens.
---
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..[code]....
Now, what do I do to get my precious tablet back to normal? , since I have the 3G version, I'm required to have a sim card which I can't put in because there's no sim card slot (it's a WIFI tab). I can't even use WiFi, because it won't turn on without a SimCard.
View 5 Replies
View Related
