Is this possible? I'm trying to make an automated script without any user interaction. I can select sideload mode manually using the volume and power buttons when in ClockworkMod Recovery, however I want to enter sideload mode using the command prompt from my computer.
View 2 Replies
I make root at one LG e510, after I put Rom manager and install custom recovery clockworkmod recovery. Everything fine till here, but after try to acces recovery, spears only stock recovery and not custom recovery.
HTC Desire S
I am trying to put recovery image on my eris. I just now figure out how to get to the directory my tools are in. What is my next step I don't get what to type into command prompt.
View 1 Replies View RelatedI was rooted and decided to unroot for giggles. After i did I went to root again and now I am getting this: "E: cant open/cache/recovery,command " When I reboot into recovery mode.
View 4 Replies View RelatedHow to start my LG Optimus Net P690 in recovery and downloading mode?
Which is the latest stock firmware available for my LG Optimus Net, my PC suite is always showing that no new version is available, but I am having 2.3.6 in my Galaxy POP while in LG its 2.3.4. LG Optimus Net is actually launched later than the galaxy POP...
Where I can find the LG stock firmwares? Is there any Custom ROMs available for LG Optimus Net P690?
I recently rooted my Motorola Droid and I am trying to run Rom Manager by clockworkmod and when i attempt to Flash Clockworkmod Recovery I get an error saying, "An error occurred while attempting to run privileged commands!" Can someone offer me some help on what to do, I have tried uninstalling and turning the phone off.
View 20 Replies View RelatedI'm trying to install a new lockscreen that I found on XDA. I have to use a command prompt to install and I'm completely lost. I just got a good handle on how to flash zip files but this is flying straight over my head. I have all the commands and codes or whatever but I don't even know where to begin I have a feeling this is probably very simple I've just never had any reason to do anything like this before.
View 9 Replies View RelatedI rooted first phone the day after purchase, I bought another one and now I have 2 to play with but ever since I bought the 2nd evo3-d it came with 1.50 s-on.Got sick of Sprint so I had it flashed over to metro.Came back with 3g speed and all seemed fine, also unlocked with s-on and had rom mgr installed. finally rooted it with evo hacks site method and managed to flash a couple of roms with minimum problems.
Finally decided to use the lovely TRWP Gooim recovery app and when I went to install a new rom I did the kelvik and cashe clearing and by accident I also did a system wipe. The new twrp app is very touchy, must careful when fingers are hovering on topof screen..I am only able to go into to twrp recovery boot screen and it states I have no OS. Am I in trouble? IS there a way of using CMD Prompt and force a ruu original recovery?
I see several posts talking about going to the command prompt on the DINC. I have searched and have NO idea where in the world it is. If they mean my computer's command prompt that sucks because I am at work and can't get into it.I was able to get it rooted with the leaked 2.2, now I just need the command prompt for some programs I want to install.FYI the leaked 2.2 is freaking amazing, haven't had a reboot (had many previous) since installation.
View 1 Replies View RelatedHow do I do this? If I click emulator it opens and closes really fast. How exactly do I open a command prompt in tools?
View 6 Replies View RelatedAny help here? Can I do it through the command prompt?
View 10 Replies View RelatedI just rooted yesterday. Running Aloysius v6.
[ROM] Aloysius 2.0 PORT V6 REUPPED (5/1/10) - XDA -developers
I need help with the command prompt. I am trying to disable OTA updates. The command is "su
mount -o remount,
rw -t yaffs2 /dev/block/mtdblock3 /system
mv /system/etc/security/otacerts.zip /system/etc/security/otacerts.zip.nothankyou"
I understand the command prompt, I just don't know how I am supposed to access the phone with it.
I downloaded a battery life app today and after I did that a tiny command prompt looking thing appeared in the top right corner of my Incredible. Everytime I do an action, a line of code appears. For example, on my main page it says stuff like
system_server
m.android.phone
And other random code lines like that. Its in a tiny text in the top right of the touch screen. Is there any way to get rid of this? I tried to uninstall the battery app that seemed to cause it, but the prompt didn't go away with it.
I am working on Sqlite DB, I want to open and view or create database through adb shell command in command prompt i'm doing this above steps,
1. cd C:android-sdk_r04-windowsandroid-sdk-windows ools>
2. adb shell
How can I go for sqlite> after step2 and I'm getting an $ after step 2 and then how can move further process. Suppose I want to view database means how can I do it. I given cd/data/data/(mypackage)/databases sqlite3 (database). After $ but it shows database not found. How can I view database executed through my code.
I am the beginner for android development. I followed the procedure as specified in developer.google.com for installing. I tried to create AVD(Android virtual device) through command path. I executed at command prompt.
android create avd --target 2 --name my_avd
But the Error is coming "Error: Target id is not valid. Use 'android.bat list targets' to get the target ids." After executing android.bat list targets it is showing blank. I am not able to figure out the problem as I have already set the path also.
I'm trying to root my new evo with the 2.02 hboot. I understand the process but i don't know how to access directories via command prompt on my computer.
View 7 Replies View RelatedIt seems that many people are having trouble navigating to the correct command prompt to do the recovery step of the root process. If you press (Shift + right click mouse) you can select to open a command prompt in that directory. I'm sure many of you know this, but I found it very helpful when rooting my Eris.
View 6 Replies View RelatedWhen I type ADB devices, it comes up with this error: 'adb' is not recognized as an internal or external command, operable program, or batch file. I already installed the adb drivers, and Windows told me the drivers updated successfully. Any idea why I am getting this error? I hope to be rooted by the end of the night!
View 24 Replies View RelatedHas anyone tried Xtralogic or any other suggested remote desktop application on their Droids? Via the VPN, I would like to connect to my windows servers from my phone. How is Xtralogic if anyone has tried it? Also, is there a command line prompt application for the Droid, so I would have the capability of pinging windows servers, (after establishing a VPN connection of course)? The built-in VPN tool on my phone works fine.
View 10 Replies View RelatedI'm starting with Android development and I have no idea what's wrong on the this command line:
C:Documents and SettingsGabriel.Esquivel.androidavd>android create avd -n Ev
o4G -t 9 -c 8000MB -s 480-800
Valid skins: WVGA854, WQVGA400, HVGA (default), WQVGA432, WVGA800, QVGA
Error: '480-800' is not a valid skin name or size (NNNxMMM)
I am trying to create the following AVDs
http://mobile.tutsplus.com/tutorials/android/common-android-virtual-device-configurations/
But it won't work on from Android SDK Manager. There seems to be bug that throws the following error "SD Card size must be at least 9MB". So I have decided to try from command prompt as I read on other blog that it will allow me to create AVDs without getting SDs less than 9MB errors. It won't take specific dimensions for the skin-s width-height
So I can see Logcat working with no problems in my eclipse IDE. However, when I try to run it in a command prompt, i get a bunch of logcat data for about a second, and then the whole thing freezes.
View 2 Replies View RelatedLooking to root my eris and have been following the guide but can't seem to figure out exactly what i need to do with the sdk program. For some reason, I can't get into the command prompt in the tools directory.
View 1 Replies View RelatedI've seen these programs and tried one and just looks like a command prompt and i was wondering if one of these programs eliminates having to use the command prompt on my pc.but my next question is how would you use it for commands that requires you to be in recovery?
View 1 Replies View RelatedI done a backup using Clorkwork Mod before I flashed a new ROM onto my phone. Now when i am trying to restore the backup onto the phone using CWM it completes the task but whenever I reboot the phone it gets passed the first samsung screen but hangs at the second SAMSUNG screen where the text is pulsing.
I have tried Wipe / Data factory reset, Wipe Cache, Wipe Dalvick and fix permissions. None of these seem to make any difference. The only thing that has worked in flashing a new ROM but I do not want to lose any of my apps /configs.
I just received a used phone that, when powered on, has Clockworkmod Recovery.
Why would this be on the used phone? Has the OS or phone been tampered with by previous user?
I cannot figure how to get to main phone screen.
I was wondering if you could change the ClockworkMod recovery, and if so, how?
View 9 Replies View RelatedI have purchased a Micromax A85, and looking for CWM for it. Is there a link, or is someone working on developing it?
View 2 Replies View RelatedI'm on a Galaxy S2 running Gingerbread 2.3.4, my baseband version is I9100XXKI1 and my kernel version is 2.6.35.7-I9100XWKH4-CL487028root@DELL136 #2
Using Odin3 v1.85 and S2 Root. (Superoneclick kept freezing on me)
My aim is to install Cyanogenmod 7.1.
So far I started off by trying to flash it with XWKDD Insecure, which I believe is wrong? However after rooting it, I installed ClockworkMod Recovery, downloaded the ROM and tried installing it - which is where the problem started - I kept getting the error in recovery mode 'Invalid whole-file signature'.
It just wouldn't boot in to ClockworkMod Recovery.
So after some digging around I managed to find a file to flash to my device for the CWM Recovery mode, tried it, and it worked. However, I still couldn't install Cyanogenmod from my SDcard.
I tried it a few times, wiped/formatted a few times and ended up getting my device stuck in a bootloop.
So, I've managed to get it out of the boot loop, and started fresh...
I flashed it with XWKH4 Insecure, unrooted, rerooted etc.
I've downloaded CWM again, downloaded the Cyanogenmod again, tried installing it, and once again it's gone back into Androids recovery and failed to install because of the 'whole-file signature' and failing to verify it.
I did post this in Q&A as well, however it doesn't seem to be as popular a forum as this one, I'm not really looking to wait for days for a response.
randomly yesterday my phone shut off and rebooted itself. Well, it became stuck on the Samsung boot screen. So I reset it again, and again, and again. Eventually I went into recovery mode and clicked the wipe data/factory reset button. Actually, at first I clicked the wipe cache button. So I rebooted it, and now everytime it boots it goes straight to recovery mode (Volume Up, Home, Power). So i began looking for solutions and decided it would be best to restore to a stock Rom. Well I downloaded one, and attempted to look for it in the internal SD card but all it said was "unable to mount sd". Did some more research, and found something called odin. I went into download mode and odin was able to recognize my device. Loaded up my stock rom (pda, .md5) and it would say this:
Quote:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I317UCAMA4_I317ATTAMA4_578342_REV04_user _low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
[code].....
Not entirely sure why it stopped at recovery.img. I installed the Samsung Drivers from the website and still nothing. Uninstalled odin and went to an older one, still same message. Installed a newer one, still same message.
Galaxy 3:I5801 with firmware upgraded to 2.2 , was rooted already..I had been trying to upgrade to 2.3.7 with cyanogen 7.2..Clockwork mode recovery was not installed and instead in the normal recovery mode a zip file ,containing the files:META-INF,System and zimage, was renamed as "update.zip"
It did accept the zip and displayed "Welcome to android 2.3.7" but then was stuck displaying "I5801" logo.I am still able to enter the download mode (Vol - | power | home combo) and the "Forced upload by key pressing(vol + | power | home)". I tried usng ODIN to flash , it is flashing and displaying "pass" but no change in the phone .