I turn it on, it says its on for like 10 seconds and at the bottom of the screen it says "unable to save networks" and then it says "unable to scan networks" and then it turns right back off
View 3 Replies
It happened to me last night on the Captivate. I tried battery pulls, deleting the WiFi nets, etc., but it still kept turning WiFi off within a minute of turning it on. I did a factory reset (I'm getting better at this process. Can restore my device back to its former glory within an hour).
View 2 Replies View RelatedI'm having the dreaded "Unable to Scan for Networks" in the WIFI. Can I fix without doing a reset? I'm on vodafone UK. All the info I have been reading points to me having to do a master reset. Or deleting a file if my phone is rooted. Can I root my phone to do this? or is this not possibly on a voda contact mobile. After I accidentally removed my WiFi from my phone. Then added it again. Getting my WiFi working. Info about Rooted phones (is it possible with mine?). A good backup software for PC, is kies any good what does it backup?
View 1 Replies View RelatedI got the samsung captivate for AT&T a couple of weeks ago and have run into a few problems with it:
1) Wifi worked great for a while, but now it says unable to scan for networks and turns the wifi off...this wouldn't be too bad if I had a big data plan but I do not.
2) Battery Life...fml
3) I cannot find ANYWHERE any supporting software to sync media files with my PC
4) The drivers will not install on my computer
5) Way too many apps are using data without me even opening them (navigation, yahoo mail etc...) I have AdvAppKiller but that gets old
It is wonderful having such a wonderful, fast device with 16 gb of memory, but these shortcomings are making me realize why I enjoyed a flip phone for so long.
When I turn WiFi on, it always say "Unable to Scan for Networks". I tried to turn off, pulled the battery, turn back on but does not make any different.
View 9 Replies View RelatedThe wireless network in my area follows the EALP/PEAP protocol which isn't supported on Android phones. So, I tried setting up local WiFi hotspots from my laptop to enable WiFi. But my phone doesn't detect that wireless network at all. My friend's Nokia E51 detects the hotspot, but not my HTC Desire. I tried detecting hotspots created from other laptops but the result remains the same. The E51 detects it but the Desire does not. Do I have to change some settings that I am unaware of?
View 5 Replies View RelatedIn Jan. I switched from Sprint to a different carrier and got a new phone with the new carrier which left me with my HTC Evo 4G and I've been trying to use the Wifi so I can use it at work or at home when I don't feel like using my laptop and whenever I try to turn my WiFi on it just turns on then off and tells me "Unable to scan for networks".
I've noticed that it says that my IP address is unknown and Bluetooth isn't working either. I did a factory reset on my phone and all that did was delete my Doctor Who background.
Sidenote: my husband was on my family plan and he had the same phone with the same service and his WiFi is working fine.
After rooting with DooMLoRD v4 tool my china A6380 Android 2.3, which has mt6516 416MHz and Android 2.2.1 instead, wifi stopped working.
Tried unroot and factory reset but no luck, still "Unable to scan for networks".
logcat follows:
D/AudioStreamHandler( 51): Asm_Afe_Start(ASM_AFE_MODE_NORMAL)
I/WifiProxyDialog( 213): >>> onReceive()
I/WifiProxyDialog( 213): >>> handleWifiStateChange()
D/AudioYusuHardware( 51): setMasterVolume=1.000000, avaliable device=2
D/AudioYusuHardware( 51): Audio_Match_Output_device mRoutes = 2 mMode = 0 Mode = 0 CheckForceUse 1 mOuputForceuse[Mode] = 0
[Code] .......
I'm trying to scan for wireless networks and found this helpful source on the net. Unfortunately it's not working and I have no idea why. My problem is that I can't wait 10 minutes for the result - I need them within a few seconds and thought about setting the boolean variable waiting on false as soon as I get a result, well it runs forever. Looks like nothing is received.
// -- Sample WiFi implementation - http://groups.google.com/group/android-developers/browse_thread/thread/f722d5f90cfae69 IntentFilter i = new IntentFilter();
i.addAction(WifiManager.SCAN_RESULTS_AVAILABLE_ACTION);
registerReceiver(new BroadcastReceiver(){
@Override public void onReceive(Context c, Intent i){
// Code to execute when SCAN_RESULTS_AVAILABLE_ACTION event occurs
mWifiManager = (WifiManager) c.getSystemService(Context.WIFI_SERVICE);
wireless = mWifiManager.getScanResults(); // Returns a <list> of scanResults
waiting = false;
} } ,i);
// -- End Wifi Sample mWifiManager.startScan();
while (waiting) { try { Thread.sleep(200);
} catch (InterruptedException e) {
// TODO Auto-generated catch block e.printStackTrace();
} Log.d("PROJECT1","Wifi WAITING");
}
Connect to WPA2-EAP ent wifi networks is not working. Any solutions?
View 40 Replies View RelatedI recently read about roaming being free on Tmobile. My phone is set to allow data roaming already. Is there a way to roam on other networks for calls also? I frequently visit areas with no Tmobile coverage.
View 2 Replies View RelatedI'm having a strange issue with WiFi on my Samsung Moment (post CL14 update). I don't remember having this issue prior to the update but I can't say for sure that it was something that started immediately after receiving the update. Whenever I turn on WiFi, it says "Scanning" for about 5 seconds, then an "Unable to Scan for Networks" window pops up. Sometimes it scans just once, other times it scans 2 or 3 times, but eventually it automatically turns off the wireless. At first, I thought the problem was caused by a WiFi toggle widget, so I tried factory resetting the phone to remove all of my downloaded apps, but I had no luck.
View 20 Replies View RelatedWill I ever be able to upgrade to Android 2.2 (and newer) on my Vibrant (tmobile) (that has 2.1)?
View 12 Replies View RelatedMy SGS (well its actually my wife's but I use it also) will not connect to WiFi networks, other than the one we have at home. If we are out, the phone will be able to see lots of WiFi networks, but it cannot connect to any of them as it says the signal is poor. Other people can be sat right next to other with other phones and have no problem connecting and they have strong signals. At home it will connect, but even then there is only one bar of signal, even though the router is in the same room. It appears that the phone just cannot get a strong enough signal to connect.
View 1 Replies View RelatedThis may seem like a really dumb question but I have been told several different things by several different people who should know. Does the Vibrant connect to a Wi-Fi and use it for data and calling? I have a Blackberry Curve at present and I have no reception inside my house. I connect my Curve to my Wi-Fi network and can do all data things and talk with zero dropped calls. I'm hoping to be able to do this with the Vibrant. If I can't I will have to consider another phone (I can't live with no reception in my house). I don't care if I can tether from it, I just need ot be able to use the Wi-Fi for data and calls on the handset.
View 2 Replies View RelatedSo I decided to actually try out Barnacle today, as I've had it installed for a couple days now. Set my options, started it, and connected with an older Acer laptop that a co-worker had at the office. Here are the speeds I got from the local San Diego, CA speedtest.net server...
5.13Mb down
1.37Mb up
Wow...that's phenominal for a mobile device!
What are some power saving apps or tips you use with you Samsung Vibrant?
View 49 Replies View RelatedWifi is not working i Cant switch the Wifi on. I have a Note n7000 android 4.2.2 cyanogenmod 10.1 nightly.
Can't press the small wifi button on dock it will not recognize on the other hand i can press the Bluetooth without any problems and when i go to the settings the small _OFF_ button will not recognize me pressing it.
I am pretty certain Ringdroid will work for me if I can save my contacts to my phone (they are currently all saved under gmail). I've heard from one person if they deleted a contact and then saved them to the phone the ringdroid worked. Can someone tell me how to do this without deleting/ re-adding?
View 7 Replies View RelatedI saved some phone numbers on gmail and synced them to my phone. How do I transfer them to the sim card?
View 3 Replies View RelatedHow do you save a pictures sent to you in a text message to the phone.
I press and hold on the picture thats in the text message and there is no option to save.
So Do I charge my phone while it off or on? When I turn on 2G , it ask the DATA is still on activation, do you want to disconnect the service? " YES OR NO " what should I do. I just got this phone, so everything is still new to me. What are the based best android apps for this phone so that I can install?
View 3 Replies View RelatedI officially want to know from real life experience, have any of you noticed an improvement in battery life by utilizing the program Advanced Task Killer (ATK). Yes or No.
I've heard arguments for and against using ATK which people have claimed could save battery life by killing off background aps and processes that hinder battery life by using the CPU in the background.
Some people say it works, others say "dude you are an idiot, you must not know anything about Android or linux, Aps don't run in the background with Android, its the beauty of Android" or something to that effect.
Maybe I'm an Idiot, but here is my experience. I have used my phone for periods of time, with and without ATK. I can deffinately say from my own real life experience, that running ATK improves my battery life. Maybe its a mental placebo effect I dont know. For those who say it doesn't work, I just have one common sense question, so here it goes. If Android is so smart, and it doesn't run background aps on it's own, which would use up energy, then why the heck does AmazonMP3 load up by it's self every 2 mins in the background. I never even use the stupid program, so common sense says if Android doesn't run background Aps like AmazonMP3, then how does it mysteriously show up on the list as being used in the background? Also I've read on xda people who root their phone, and manually remove programs like this, and they saw an improvement in battery life, isn't that more proof that indeed these programs use some energy in the background, thus ATK does help?
How do I mount my Vibrant to my Windows XP?
I plugged in the USB from my vibrant to my laptop.
I get 2 icons in the upper right hand corner -- red exclamation mark, and USB icon.
I have USB debugging turned ON.
I get the prompt to mount
I click on mount
and, nothing happens...
what am i missing?
I am using Windows XP, and Samsumg Vibrant on tmobile.
I am new to this phone and so far so good.Working things out and getting it set up like I want it. I have two photograph widgets on one of my screens, one set up for newly taken pictures and one set up for newly shot video. The only problem is, I don't know how to change the default video save location. I am using the astro file manager and have seen that all videos and pictures save into a file named DCIM on my SD card. How do I change this to make it save pictures and videos into different files?I have made a different file for my videos and manually moved them into the folder but the phone is still saving new videos to the same old default place.
View 4 Replies View RelatedI downloaded the .zip file located in this thread. Every time I attempt to "reinstall packages" it won't work. Yes, I renamed it to update.zip, yes my phone is rooted. The error message simply says "Installation aborted" then "Unable to mount" upon a second attempt. I'm running the Axura ROM 2.0.5 using the Zeam launcher.
View 2 Replies View RelatedI've successfully unrooted in order to return the phone for a replacement but I'm still seeing the superuser permissions app.
My method for unrooting was opening up terminal on my phone and using this code:
Code:...................
The post says it all. I did a little searching and cannot seem to find this particular issue.Whenever I am in MOBILE NETWORK SETTINGS I have T-Mo as an ACCESS POINT NAME, but I am unable to see t-mo in the NETWORK OPERATOR search....only ATT.What do I need to do to correct this?
View 7 Replies View RelatedI am so use to my Touch Pro 1 & 2 as far as saving everything to my SD card. Why am I not able to save applications and other documents to my sd card on android? My phone is extremely slow now, force closes often and the battery dies every 15 min. Is there any way to save apps to the sd card?
View 2 Replies View RelatedWhen I connect my Vibrant phone to my Win XP system and select as Mass Storage, I can see two removable drives but can't open it? When I try to double click, it says "Please insert disk in to drive D:" My son's Win 7 system accepts it fine.
View 1 Replies View Related