I got my phone about a month ago and got sick of the lags and decided to upgrade. Upgraded to I9000XWJM2...much better but still see lags in some places....however the thing that bothers me is the phone volume went down! Sometimes I have to strain myself to hear on the speaker!
View 1 Replies
why does the ringtone volume go from too quiet on level 6 to loud to room-filling boombox level on level 7?
there should be one step in between 6 is way to low and 7 is way to high.
using JM2 maybe it's fixed on a later firmware?
is there any other way to add a more sensitive adjustment?
Is there a way to make the ringtone volume and notification volume the same? When I turn the ringer volume down using the side buttons on my phone it only turns the ringer down, nothing else. I'm coming from the Evo where you can click "use same volume for both" or something to that effect. Is this a 2.2 thing?
View 1 Replies View RelatedI'm writing an Android application that plays back voice mails using Media Player, which are just WAV files that have been sent to the device. When I play the file, it's played on the device's speaker, or else it plays through headphones if they're plugged in. What I want to do is play the file so that it sounds to the user as if it's at the same volume level as a normal phone call. Is there a way to route playback so that the file is played through the phone's ear piece instead of out of the speaker?
View 2 Replies View RelatedI have noticed that when I text *3282# to check my data useage, the notification ringer gets switched to low and I have to go in to settings to change it back. Anyone else have this same issue?
View 15 Replies View RelatedI have Samsung firmware version DF29 on my Galaxy and Im wondering is this the most up to date firmware or should I be upgrading to something else? Its the firmware that came on the phone and if its not the latest, what should I be running? I prefer a firmware thats been tested and known to work flawlessly. I dont really want to use any firmware in delopment stages etc.
View 2 Replies View Relatedthe speaker volume level for my vibrant decreased considerably even though the various volume levels in my settings haven't changed. Music and GPS instructions are barely audible. I am new to Android and hope I may be overlooking something.
View 2 Replies View RelatedIf I upgrade from 1.5 to 1.6 using this method Flash rom Galaxo 1.6.1 - Installation on Samsung Galaxy I presume I will loose all my apps and settings.
Currently on O2 in the UK so i'm worried about losing message center numbers and APN names etc etc.
Is there a way to backup the phones settings and apps then restore them after i've flashed to 1.6?
Today i made a upgrade from android 2.1 tot 2.2.After the update everything is working very well except the internet connection.It works very well with WiFi but not the telephone connection.When I turn off the wifi I can't make any connection with the internet.Have someone any solution?
View 5 Replies View RelatedSo I upgraded to Galaxo and I can't connect to any 3G. 2G is not on and WiFi is dropped really easily. Running v1.6.3.4 with the got the Galaxo Gapps installed. Used the recovery v6.1. Not sure on on what to do. I'm using Bell.
View 9 Replies View RelatedI just bought a Samsung Galaxy i7500 with Bell mobility and I am trying to figure all these threads out and how to root, and how to upgrade my firmware, but the biggest hurdle I have come to is my pc will not recognize my phone as a 'phone' it only sees the internal sd card and the external card. I have downloaded three different versions of the samsung PC suite, and everyone will not recognize it. Am I missing an important driver? All I am doing is connecting via USB, and on my phone I choose to mount USB so I can access my sd cards on my PC.
View 16 Replies View RelatedSamsung Galaxy Tab GT-P1010 no display got stuck in ODIN while upgrading to GB
View 2 Replies View RelatedMy device seems to be dead.
I tried upgrading from GB2.3.4 to 2.3.6, and that's when the problem occurs.
I used ODIN 4.3.8 to flash the firm ware. But ODIN was downloading MIBIB for the past few hours.
And then, the screen appear a "Phone connecting to a PC, with a exclamation mark in between."
why after upgrading galaxy to galaxo 1.6.3.3 all slowed down and all the worse for the battery is quickly discharged,What should I do to improve the work of processor?
View 7 Replies View RelatedEven after upgrading my I-9082 to latest update patch (61 MB) , the phone hangs and freezes suddenly.
View 19 Replies View RelatedI just upgrading my phone to Android 2.2.
I realize that even if I set my media volume to max, the media volume output is still very weak.
This issue is not found when my phone is running on Android 2.1
Has anyone seen this issue?
Is this a bug? Is there a fix for this?
Got a Desire partly because once the 32GB comes out (on pre-order) I'll be using it as an mp3 player as well as a phone. Managed to find a good program to sync my music with it (MediaMonkey) and now the only other hurdle to this seems to be the volume levels which are too low for my liking. Will simply getting headphones with a volume control push the volume up further? I'm planning on buying some headphones for it that'll include a mic, volume control and maybe a couple of buttons to control the music, but is there anything that has all these? I'm not keen on bluetooth devices in the slightest, so just want some super-duper in-ear headphones really.
View 3 Replies View RelatedI just got a Droid 2 and I think the phone is amazing... except for one thing. I am amazed that the volume rocker doesn't function logically like any other volume rocker. I have heard brief mention of this being a common problem, but I can't seem to find any other threads on the issue. Here's what I want my volume rocker to do: (just like any other phone,) I want it to adjust volume level, then go to Vibrate (everything!) and then go to Silence (everything!) Right now, when it goes to silent, some things still vibrate, and when it's on vibrate, some things still ring--and it is driving me crazy! On a related note, it would also be awesome if I could set it up to silence all notifications beside phone calls, text messages, and the alarm, when I want it to, like when I'm sleeping. If somebody could humor me and tell me exactly what I need to do to get my D2 to function in these respects like a regular phone, but while not impeding its other awesome functions, that would be great.
View 3 Replies View RelatedJust wanted to make sure if this is a common issue or something wrong with my handset (so that I can try getting it replaced).
When I hear calls using phone's default speaker, the sound comes okay till one volume level. If I move up, the sound distorts.
If I use speaker-phone, things are worse. After a certain level, sound crackles a lot.
For music via phone's loud speaker, the sound doesn't crackle. But as identified by many, I can hear music with no bass & lots of treble.
Is this normal for Desire?
Comparing it with my wife's N95 (which has stereo speakers) was a nightmare for me.
I do have the option on that decreases the volume once I move it, but even before I move it, it's sometimes very hard to hear unless if there is no other noise. Could it be the actual ringtones? I used ringdroid to edit down songs and make a ringtone on the aria.
View 6 Replies View RelatedI'm having a small issue with my current phone and headphones. The problem is that headphones and phone have no problem with higher output volume. Temporary solution - speaker boost, trouble is: it causes any equalizer to FC.
How can I increase the volume at kernel level? If that's not possible then rom level would be enough. No apps, just pure source changes.
How can I save my volume level settings without losing them? when i reboot my phone, my volume levels return to default at a louder level. so how can i save my volume settings without adjusting them again after rebooting?
View 2 Replies View RelatedI listen to Pandora on the Eris and podcasts on the media player. At full volume with earphones, the volume is still quite low, much lower than what my blackberry puts out, and not very good. Any way to up the volume besides the side volume rocker?
View 2 Replies View RelatedAfter the last firmware update the sound was pretty low,so i wanted to increase the volume... tried the volume hack but it did not increase the headphone volume,only the handset volume..... this is kinda a hardware fix...
Do this at your own risk
first close musi app
then open dailer an type :
*#197328640#*
This will open service mode
here click [8] audio
then click [2] headset
then click [2] rx value
then click [5] rx codec for midi
then click [1] rx codec gain:
Then pres menu key, key input,and type in 5fff , this increases the gain to about 4db,wich is in my opinion the best option. after u inputed the value pres menu key and select end. no restart needed,just open music player and press play and you will see the differences. I was about to sell my i7500 because of lack of headphone volume but now im happy...i think this will work with i5700 and moment,haven;t tried it though!
Increasing voice volume of incoming calls Samsung Galaxy S
View 3 Replies View RelatedI have a samsun galaxy s2 t989 from t mobile, and i have a aquestion, how I can adjust the volume. I enter the options menu sound system and upload volume but low volume listening. I saw on the internet a key * # 197328640 # I can get but I can not change the speaker says the value of 53, this would be the reason why I listen to low.
View 4 Replies View RelatedI'm having trouble developing an app, while it works in API level 10, it does not in API level 7. I wondery why and I've been looking for a site that summarizes the differences, or the new features from one API level to another and cannot find it.
09-04 04:24:21.485: E/AndroidRuntime(6834): Uncaught handler: thread main exiting due to uncaught exception
09-04 04:24:21.510: E/AndroidRuntime(6834): java.lang.VerifyError: [code]....
There seems to be a problem with an uncaught exception and reflection, although....why does it work on API level 10?
I just flashed my Galaxy S2 i9100 with the PureICS v6.1 ROM and almost everything is fine except one problem:
Whenever I start a skype call there is no sound, if I start a video call there is video but there is still no sound, neither party in the call can hear anything.
I was just wondering if this was a ROM specific bug which just needs to be ironed out, or something to do with skype generally misbehaving on ICS ROMs which don't belong to the Galaxy Nexus or whatnot.
I tried to install ginger bread 2.3 . i used odin and had the necessary firmware tooo(XWKS2). After odin declared "PASS", the phone rebooted.
But soon after it posted the following error message.
"The Application Setup Wizard (process com.sec.android.ugl) has stopped unexpectedly. Please try again later."
this message is followed by a FORCE CLOSE button
I noticed that when turning down the volume of the ringer with the volume rocker it doesn't automatically turn down the notification volume as well. Is there a way to set the volume rocker to adjust both notification and ringer volume to the same level? You can test this by going under Settings/Sound and Display/Ringer Volume...and try adjusting the volume with the rocker and it only adjust the Ringer Volume.
View 2 Replies View Related