Samsung Galaxy S : Recovery Boot Error - Can Not Access To /system/csc/VOD/system
Sep 4, 2010
Phone: UK Galaxy S Issue: Recovery boot error message in red writing
Multicsc : can not access to / system/csc/VOD/system/
Background: I have been trying to root my phone from information found in a youtube video. All went well and the little ninja bloke with the sniper rifle was in the app list. Tried installing busybox and was told that the phone was not rooted�..
I think I ran the root application again and at some point I started getting this error message when in recovery. I have since run the one click root method to unroot the phone and the little nija dude is no longer there. Since I rooted the phone it will no longer connect to my wireless network, it finds the network and attempts to obtain an ip address. After a few min it times out and tries again. When I load the phone recovery the error message is still present.
View 3 Replies
Oct 17, 2013
"Android system recovery <3e>" when I push the "volume down + home + power button". I didn't went to "dowonload mode" but I just come with "android system recovery <3e>".
everyone just said like a simple "just try again, maybe you push the wrong button or anything" I told them I had try every thing before I ask them all and that's all didn't work.
I just wanna flash the custom rom for my galaxy s3 and rooted like I did before on my galaxy young,
View 1 Replies
View Related
Oct 3, 2009
A few minutes ago I have updated my Samsung Galaxy with the "New PC Studio" for Germany (not Android 1.6!!!). After that, my mobile restarted and now the whole system isn´t working. There always appers an error message that process com.android.phone has stopped unexpectedly. Normaly( when I bought this phone ) I was able to tap to Wait, but now there is no way to do it. Now I can only tap to close but then it cuttes all my conections. This wouldn´t be the problem if it appeared only one time, but THE ERROR MESSAGE APPEARS EVERY 5 SECONDS.
View 7 Replies
View Related
Oct 20, 2010
I downloaded rsdlite set up the drivers and flashed the 2.1 sbf, I was on the leaked 2.2. on Droid X it says to boot into recovery and wipe system and data, but if I try to go into recovery it just shows a triangle with a ! inside it. So I booted normally and its stuck at the red eye. help pleasee I really need my phone
View 3 Replies
View Related
Jun 15, 2013
I used my galaxy ace (I had the low memory icon) when playstore has updated an application, then suddenly all my applications are set to "force stop" including Holo launcher, so I rebooted, but the I had teh cyanogenmod 7 icon repeat (bootloops) I cann't access to the recovery mode (I had RAMDUMP mode (ARM9 mode)) I can access to the "downloading" mode so I wanted to flash a stock rom (even three in fact) with odin multidownload 4.38 but nothing happens when Odin has restarted my phone, I had the little android image that works then a message like: "E: failed to mount storage (invalid argument)" and the phone started to reboot loop I've tried dozens of manipulations unsuccessfully kies does not see my phone I do not know what to do,
PS: I've tried all the manipulations removing the battery / SIM card and sd waited 5 minutes, I was able to put the phone in Emergency Mode DLOAD but it nothing happens the only real thing that still works is the "Downloading "mode , but I think my recovery mode was crushed and I cann't access it even when I can flash with odin I always have the problem of "E: failed to mount storage" (the same style as him [URL]...
View 2 Replies
View Related
Sep 15, 2010
I just found out how to get in Android system recovery <2e> mode. I have 4 options
1.Reboot System Now
2.Apply SDCardlUpdate.zip
3.Wipe Data/Factory Reset
4.Wipe Cache Partition
If I choose number 4, do you guys think It will destroy my phone?
View 5 Replies
View Related
Aug 23, 2010
I just recently purchased a Samsung Vibrant and started to play with it. I downloaded all the necessary drivers and I rooted it using a method I found online here with success. After playing for a few days, I decided I'd take on the task of updating to Froyo.
View -1 Replies
View Related
Aug 16, 2010
Anyone know why I get this error on my Captivate when looking for system updates? Is it because its rooted?
View 2 Replies
View Related
Nov 5, 2010
When connecting my Galaxy-S to the Samsung Kies software, my telephone shows up with an incorrect telephone number. I did change the sim-card (and subsequent number) since first using it, but I never logged intio Kies with the old sim-card.The phone is rooted.How do I get Kies (or my Samsung phone) to show my current telephone number?In the phone properties (Menu, Settings, About, Status) the same wrong number is shown.When calling, the receiver sees the correct telephone number. So the issue is not operator related but telephone related.
View 2 Replies
View Related
Aug 9, 2010
I hit the top button. Flash Clockworkmod recovery or what ever it said. I then backed up my Current ROM. I then downloaded Cyanogen v6.0.0 cr2. It downloaded and rebooted my phone. But It went to a screen with a Triangle w/ exclamation and a phone under it. I then hit the up vol button and camera, and now I'm at the Android system recovery page and I don't know what to do next. These are my options reboot system now apply sdcard:update.zip wipe data/factory rest wipe cache partition wipe base band data. I did click to backup current ROM and wipe data and cache.
View 38 Replies
View Related
Aug 9, 2013
My 4n is Samsung Galaxy y duos. Nomaly it has a 240MB System Space. I installed a custom rom (xDuos V3 2) with him guides. its fine. but I tried to get stock rom back. so i wiped all data ,system... n restore my old cmw backup.
But failed to restore. now my 4n has only 220mb space.
it failed due to low system space <as i think>
View 5 Replies
View Related
Feb 12, 2012
i have a samsung galaxy 3 and i would like to know how to use or resize the rom system storage (I have around 50mb free space, because i removed all stock useless apps) to get more internal storage? I can't move app in my sdcard because it's full
View 1 Replies
View Related
May 27, 2013
I have a very big problem with my samsung galaxy nexus. It started 2 weeks ago when I tried to turn ON my phone, and it randomly can't Load the system (Jelly Bean 4.2.2). When I try to Turn it ON, the Nexus Picture stock up (the green red blue yellow moving image suddenly stop) and then a MATRIX like will appear on the screen (sometimes around the nexus image there will be green lines and dots. And sometimes the whole screen will have green pixels/Dots). I thought that the system is damaged, after many trials of recovering the system, I Decided to do a factory reformat/ return to factory settings.
Since I can't access the system, I unlocked the phone , installed teamwin recovery system, and did a wipe of all the things inside the internal memory (that was the most stupid decision ever) since I lost the backup system image inside the internal sd card.
I decided all of that all because that the Galaxy Nexus don't have a external SD CARD. And since I can't do a recovery of my files (because I need to be inside Android to have a DB connection to the phone). I had no option than to wipe all System, Dalvik, Cache, and Data. Now I can't flash any android system since the Clockwork and teamwin need the android image to be inside the SD CARD. And I can't send/receive any file from/to the SD card. I already tried "Nexus Root Toolkit" and "Galaxy Nexus Toolkit".
One good thing is I did install an "ICE CREAM SANDWICH image" using "Odin" (Since that was the only image I found in the internet that can be installed using Odin, but there is no luck also, when the animation is loading, the animation suddenly stop and the phone restarts.
View 1 Replies
View Related
Sep 6, 2010
I got one of the new vibrants that won't boot into recovery. Only the batches before august allow you to getting into recovery by holding vol up and down. I confirmed with t mobile that this a true statement, so i need another way in but cant figures it out i tried adb but it wont work either.
View 2 Replies
View Related
Sep 20, 2010
1) I am using Eclipse IDE and Android SDK 2.1 for my application. My application reads some data files from the File System, so using DDMS i push all the files in "/data/data/com.mypackage/" folder and run my application on emulator. I am able to see my desired output properly on the emulator.
2) Now i have Android device and i don't know how to push the files in the Internal memory of the phone. I have installed driver CD. But it only shows me the SD card directory.
3) Actually what i want is that the moment my application is installed and run it should read the data files from the file system. So there should be no added efforts to push the files in the file system.
4)Means can i pack my data files with my .apk file and when the apk is getting installed can the data files be placed directly in the internal memory(file system) i.e. "/data/data/com.mypackage/" folder. Is this possible ?
View 3 Replies
View Related
Apr 30, 2013
I bought a new Samsung Galaxy Nexus via ebay yesterday and it came with Android 4.0 ICS software. I went to "Settings >> About Phone" - No "System Updates" option available!!
how do I get this option or update my phone to the latest software Jelly Bean 4.2.2 without this option on the phone.
View 6 Replies
View Related
Oct 4, 2012
I try to understand android boot sequence on my JB (under CM10). I found some docs and there should be specific partitions (boot, recovery, system, cache, data).
My understanding of the boot sequence is now:
A) normal boot:
1) Power ON ->
2) bootloader ->
3) boot-partition where i flashed the kernel aka boot.img ->
4a) system-partition with the OS (libs, UI, etc) where i unpacked over CWM my customROM.zip ->
4b) data-partition, where i unpacked google-apps.zip and installed all the apps ->
4c) cache-partition with user data
B) recovery boot (adb reboot recovery):
1) Power ON ->
2) bootloader ->
3) recovery-partition with CWM where i may unpack all the .zip stuff to proper partitions, or restore from sdcard, etc.
Is this correct? I wonder, because i didn't installed CWM into recovery-partition. It cames from install of CM10 (fastboot -i 0xfce flash boot boot.img), so it must be in boot-partition and not in recovery?
So, next confusion: i looked up to /proc/mtd and i don't see neither boot nor recovery partition here:
Quote:
# cat /proc/mtd
dev: size erasesize name
mtd0: 19000000 00040000 "system"
mtd1: 00600000 00040000 "appslog"
mtd2: 06580000 00040000 "cache"
mtd3: 1a400000 00040000 "userdata"
I did a backup with CWM and loocked the data. There aren't boot, and recovery backups:
Quote:
# ls -lha /sdcard/clockworkmod/backup/2012-10-04.18.49.55/
d---rwxr-x 2 system sdcard_r 4.0K Oct 4 18:56 .
d---rwxr-x 3 system sdcard_r 4.0K Oct 4 18:49 ..
----rwxr-x 1 system sdcard_r 1.6K Oct 4 18:54 .android_secure.vfat.dup
----rwxr-x 1 system sdcard_r 54.6M Oct 4 18:55 cache.yaffs2.img
----rwxr-x 1 system sdcard_r 360.2M Oct 4 18:53 data.yaffs2.img
----rwxr-x 1 system sdcard_r 212 Oct 4 18:56 nandroid.md5
----rwxr-x 1 system sdcard_r 214.6M Oct 4 18:51 system.yaffs2.img
#
So, i think i didn't understand the boot sequence and partition schema corectly.
View 2 Replies
View Related
Jul 21, 2012
I have a samsun galaxy s2 t989 from t mobile, and i have a aquestion, how I can adjust the volume. I enter the options menu sound system and upload volume but low volume listening. I saw on the internet a key * # 197328640 # I can get but I can not change the speaker says the value of 53, this would be the reason why I listen to low.
View 4 Replies
View Related
Feb 9, 2011
My samsung i5500 wont boot normally so I want to try booting it into recovery and resting it. I've tried power, center key and volume down. which I thought was the recovery combination but it just comes up with an icon saying downloading and does nothing. Any recovery combination or another way to fix.
View 9 Replies
View Related
Sep 21, 2010
Does anyone have original lg eve boot.img and system.img? I tried open etna and now cant boot phone. It just loads android and nothing happens. I can still get in fastboot mode. I had ver v10d before
View 5 Replies
View Related
May 14, 2012
how to obtain the time of the last system boot? I need to determine where the system has been rebooted or powered off since the last time that my app was launched.
View 4 Replies
View Related
Feb 9, 2009
Is it possible to write data or create folder in system directory like /system/media/audio/alarms. i.e other than our respective package.
View 2 Replies
View Related
Oct 18, 2010
I have a rooted Fascinate. Using ES file explorer I was able to view system folders and found the system media files containing ringtones, notification tone, etc. However, I can not edit the files there or paste new files in there. I cannot find the system folder when I connect the fascinate to a computer. I tried showing "hidden files" but the folders still would not show up.
What I want to do is add my downloaded ringtones into the system media folder so that I can use those ringtones without having those ringtones appear in my music player. Another post tried to deal with this issue of the music player recognizing ringtones and notification tones, but no one could provide an actual solution to the problem. If I could move ringtones from the media folder on the SD to card to the media folder in the system folder, this would solve the problem.
Can anybody access the system folders in a manner that I can add files to the folders.
EDITED: PROBLEM SOLVED.
With the help given below, I came up with a solution, and have pasted instructions directly below.
Here are the steps I did in case any one else is interested.
Once your phone is rooted, it's pretty simple.
1)Download Root Explorer from the Market. Root explorer will give you the ability to edit folders/files that normally can't be edited, ie read and write permission as opposed to read only.
2)Using Root Explorer (make sure in top left of program it says "mounted as r/w"), copy any ringtone, notification file, .ogg file, .mp3 file, etc that you have made or downloaded, by selecting sdcard folder and navigating to the location of your tones, long pressing the file of interest, and select copy. (You can even long press on the folder and copy the whole folder of tones).
3)Still using Root Explorer, back out of the SD folder, and find the folder called "system". Navigate to system/media/audio/"ringtones" or "notifications" . Click the paste button at the bottom of the screen (which should have appeared as soon as you copied your file/folder). The file/folder will now be in your system's tone folder.
4)You must power down and power back up your phone before the phone will recognize these newly added tones.
5)Either delete the tone files from your SD card, or put a .nomedia file into the folder to remove them from the SF's media player.
View 7 Replies
View Related
Nov 17, 2010
I am an Android app developer, and I have purchased a Nexus One device which I use to continuously test my developed Android applications.
Background: ----------------- One of the applications I developed uses a native shared library (e.g. myNativeLib.so). Only my application loads & uses this native library. I had developed this app before Android NDK came out. I pack my native library into my apk's 'assets' folder, and during my application start- up, I extract this native library from my package's assets folder to my app private directory (i.e. <assets> -> /data/data/<myappprocess>/ myNativeLib.so). Then I use System.load() API in my application to dynamically load this native library.
Problem: ------------ This application was developed during Android 1.5 (i.e. cupcake) days {I didn't have the Nexus One then}. The above procedure has been working without any problems right from Android 1.5 to Android 2.2 (i.e. Froyo). I have also tested the same on my Nexus One for Android 2.1 (i.e. Eclair) and Android 2.2.
The problem began the moment I recently upgraded my Nexus One to Android 2.2.1 via the FRG83 system update. Now, whenever I try to load my native library, I get the following error:
D/dalvikvm( 3653): Trying to load lib /data/data/<myappprocess>/ <mynativelib>.so <some address> I/dalvikvm( 3653): Unable to dlopen(/data/data/<myappprocess>/ <mynativelib>.so): Cannot load library: link_image[1995]: failed to link <mynativelib>.so
What I have Tried: -------------------------- 1. I tried my application using Android 2.2 SDK (emulator)...it works, no issues. 2. I checked out the latest froyo & android2.2.1 source code from Android open-source, built & tested my application + native lib using the latest froyo source...it built & ran, no issues. This should've taken care of any changes in the native code dependencies between Android 2.2 & Android 2.2.1 3. I even checked Android 2.2.1 source code for dalvik (java System & Runtime classes) + bionic (linker & dlopen sources) between Android 2.2 & Android 2.2.1 (using source checked out from Android open-source), but couldn't find anything consequential 4. I am unable to return my Nexus One to Android 2.2.
View 3 Replies
View Related
Jun 30, 2013
When I use an explorer like ES explorer or Root explorer I can go to system/ and find several files & folders.
However, when going to recovery and using the TWRP File manager or by using ADB Shell the System-folder is empty except for a folder named bin/. No sign of build.prop or any other files/folders.
View 5 Replies
View Related
Jun 23, 2010
Can we modify the system while the phone is booted now that we have the unrevoked recovery flash tool? is this what NAND unlock means?
View 24 Replies
View Related
Jul 11, 2012
What will the cwm backup?
if I backup a system with locked bootloader,will the bootloader relock after I restore the system from an unlocked bootloader system?
Which content will cwm backup?(include kernel?)
View 5 Replies
View Related
Aug 5, 2010
I recently rooted my droid and then unrooted for the froyo OTA update. I found a file with took me back to stock recovery. this file wont let me apply the update.zip because it is android recovery 2e. Does anyone know where I can get android recovery 3e?
View 1 Replies
View Related
Apr 4, 2014
ProTab 25XXL tablet
after too many pattern attempts I need factory reset (disabled usb tethering setting and wifi off). When I get to android system recovery I can't do anything. I'm trying volume up/down buttons but I'm still on "reboot system now"
When I push volume down button, nothing happens:
dsc_1117.jpg
and when I push volume up button, just this screen:
dsc_1118.jpg
View 7 Replies
View Related
Mar 30, 2012
Im really stuck, my phone is rooted, is deleted something that i didn't know was important(with titanium backup pro) and it failed everytime to restore, so i tried to reset my phone to default setting.
But guess what, my phone boot but stop at "the application settings(process com.android.settings) has stopped unexpectedly. Force close )
I got a back up of the original rom that i made with clockworkmod so i would like to restore it. But i cannot boot in systeme recory mode
i tried:
vol up/down + home + power = no result
vol up/down + back + power = yellow and it says "emergency mode!! but nothing happen"
View 1 Replies
View Related
