When I start Barnacle all I get is
"Please wait while windows connects to the Barnacle network. Waiting for the network"
Barnacle used to work on this laptop .. but I was running windows 7 Pro and Velocity V2.I am now running Windows XP Pro and Velocity V3 with the GNM Turbo 4 with kernel.In case it matters,the laptop is an HP EliteBook 8440p.I've been working on this issue for about 8 hours.on and off.
View 2 Replies
I don't understand the difference. It seems a lot of people are trying to get Wireless tether to work on the ally but I don't understand. Barnacle works just fine. Is there some sort of difference?
View 3 Replies View RelatedI can't get Barnacle to work with my rooted droid or any other WiFi app for that matter. I have kernal 2.6.32.9-g874c292 android-build@apa26#1
I have tried it with and without Skip wpa_supplicant
I have tried it with and without USB debugging
I have tried regular barnacle and Barnacle legacy
I have turned it on, waited 1,5,10 and 60 minutes and pushed associate
No matter what I do I can't get it to broadcast. Any help would be appreciated. If someone else has barnacle running please tell me the settings and steps you used to get it running.
How can I confirm that apps2sd is working properly? Every time I install an app my internal memory decreases (I'm pretty sure that means it is not working).Is there a folder located on the sd card where all of my apps should be located?
View 9 Replies View RelatedPhone prompted me to do an update so I did, now skyfire won't even open and the default browser that came on the phone will at least open, but force closes after like a minute. Can I roll back to my previous firmware? I started to browse all these rooting and flashing forums and sticky's and it all sounds like rocket science to me.
View 1 Replies View RelatedI believe it's because I accidentally deleted the Talk apk without backing it up. How can I revert it back?
View 17 Replies View RelatedI'm not sure when this started happening or if it ever even worked, but my vibrate notifications do not work for text messages or email (i'm using K-9). I've gone through EVERY possible setting, in the messaging app, in K-9, and the standard phone settings, to ensure that Vibrate Notification is indeed on, and yet it does not work. It doesn't matter if my phone is on Vibrate Mode, Silent Mode, or Normal Mode, no vibration notifications.
I've tried restarting the phone, nothing works.
My Haptic Feedback works perfectly.
I'm a new comer on this forum. I got my Ally about a month ago. So far I like it overall, though it feels a little slow at times. I installed the update1 pushed out to me couple weeks ago from verizon. After that, the Skype mobile doesn't open with error message. I tried removing and reinstalling it, then it worked again. But it's screwed up again after rebooting the phone. I had to repeat this twice. Sorry if this was discussed before. But is there any solution to this problem?
View 6 Replies View Relatedthis isnt the same as all the others, i rooted my phone and was able to download apps for a few minutes, after that all my apps would sit at "starting Download" i would wait hours for it to work but nothing ever changed. i paniked and reset factory settings on my phone so i only have stock apps and SU, the catch is it wont let me delete SU so my warrantee is void. also when i try to reboot recovery it looks like it will then goes black and starts normally. is there a way to remove SU or reboot recovery another way? i would be fine if the market started working again please help.
View 20 Replies View RelatedSo trying to use a Bluetooth headset or hands-free speaker doesn't work on the Ally with v2.1 and the update. Does rooting and installing another ROM fix this? Allegedly this is fixed in Froyo, but who knows when (if?) the Ally will get it.
View 3 Replies View RelatedMy fathers phone got the OTA update to version 8 ever since his vibrate functions in games ringers etc has just vanished. The phone has been reset via settings>privacy>factory data reset twice. And i still cant get the vibrate functions from haptatic keyboard or ringers to work. He needs the vibration stuff back for work. If i cant figure it out it will have to be returned as nonfunctioning so unless im totally missing something
this is all of our first android phones my 2 sisters and my mothers ota worked fine i have the v9 update from the updater but my father ota just messed up i guess
Looks like a very neat (and free!) app. Requires root access, but that's not a huge deal. Barnacle Wifi Tether - Easiest Tethering for Motorola Droid. Barnacle Wifi Tether - Android app on AppBrain. Might be a good thing to try out.
View 5 Replies View RelatedI just rooted my evo 4g so I can tether to my iPad aim using. Barnacle and a tether app called wireless tether both r free in the market when I try to use barnacle it says FAILD TO SET AP-SCAN I don't know what that means aim sorry aim a lil on the stupid side n when I to use the wireless app it says aim sorry your phone is in a unknown states does that mean n how do u fix it some please help me fix this problem.
View 2 Replies View RelatedI have been playing with this apparently and I hooked my phone to Xbox live too see how it would work. Even though it gives a strict Nat type it works well. using the setting in barnacle is there a way to make the Nat type open?
View 4 Replies View RelatedAfter not being able to get "android wifi tether" to work with my iPad, I downloaded Barnacle from the market and it is working flawlessly. Didn't see many threads mentioning this app for root users. It looks pretty robust and pulling about 2gbs and 400kb up. Will update post with any problems or other remarks. Anyone else using this?
View 6 Replies View RelatedI have a rooted Motorola Droid running the Barnacle WiFi tether app which has been working great. The problem I am having is trying to use a VPN connection over the Barnacle Wifi. Is this even possible ? Or maybe possible with a different wifi tethering app? I have tried connecting to my VPN first with the Droid and then turning on the Barnacle Wifi Tether which doesnt work. Then I have tried starting up the Wifi Tether and then trying to connect the VPN from the Droid and also tried connecting to the VPN using my iPad connected to the barnacle wifi, with no luck.
View 2 Replies View RelatedI am rooted and i installed Barnacle and i can get it to connect to my labtop but it drops the connection every 10 minutes like clockwork and reconnects most times.
View 1 Replies View RelatedAlright so, I've recently rooted my phone and I installed terminal emulated, I have superuser permissions and I'm semi-familiar with both. I got an app called Barnacle Wifi Tether and when I try to run the app, it says permission denied and it doesn't ask for superuser permission. When I go into terminal emulator and type in su it says permission denied.I forget the code to manually give SU to something like Barnacle...I'm tech savvy but not Droid savvy yet so be gentle!
View 4 Replies View RelatedI had been using Barnacle with my Motorola Droid (upgraded to Froyo), and it connected to my iPad and laptop without any issues.Just tried it the other day, and I get a message stating "Baranacle requires 'su' to access the hardware! Please, make sure you have root access".The phone is obviously rooted (easy root), since I had been using Barnacle before.Any reason why it's not working now? what exactly IS 'su'?
View 1 Replies View RelatedMy Windows 7 laptop seems to find the barnical network, but when I connect it doesn't seem to work.
View 3 Replies View RelatedCan anyone else get barnacle to work after updating to 2.2? My computer was connecting fine before. It sees the barnacle in wireless network list but says it cannot connect to the wireless network. I already uninstalled barnacle and dl'ed again, but that didn't fix it.
View 8 Replies View RelatedI really want a free wifi tether, from what I have read barnacle is very good, and keeps AT&T from seeing that I'm tethering. Here is my journey thus far:
1. search barnacle on app market: no results
2. download double twist, search for barnacle, find it, scan the barcode. It recognizes it as barnacle. Sweet. I press the button to continue to app market, market opens, says "can't download that" or "error" or something.
3. Find the barnacle apk. online, download it to my computer, connect my captivate to my computer, throw the apk. file onto the captivate. Sweet! Now I have the apk. file on my phone at long last................
I am new to this forum, I came looking for help with the barnacle app and found a great forum for everything android, I am sure it will come handy.My problem is that my barnacle app disconnects when the phone screen turns off. I stay connected to the barnacle wifi signal but no Internet, in the barnacle app I get connection errors, I just need to stop the service and restart for the problem to be fixed, this only happens when the screen turns off so now I have the screen always on when tethering but that is not good form the battery.I have auto killer installed, I tought that it was the problem, and that auto killer was turning off the service but I uninstalled auto killer and problem persists, I have no other task manager installed.
View 1 Replies View RelatedAs per requests I have started a new thread. I would like a few people to test it out and see if they can get it working. I have been using it for a few weeks now and has worked perfectly on various Wireless devices that can connect to AD-Hoc Networks. Here are the steps that I followed: Code:
View 36 Replies View RelatedAs the title, I downloaded barnacle about 2 weeks ago and could not get it working on my phone then visited the makers site on my laptop. Found a link on there to the settings needed to make it work on the X10 and here it is: Set LAN to athwlan0 Thats it! So if your rooted you can turn your X10 into a wifi hotspot and run what you want on it! 2 laptops and a PS3/Xbox? no problems. Let your poor friend who needs to use wifi to go online with their phone? No problem.
Apparently you can even let an ipad go online via the app and it is bloody fast I use a dongle for internet and although its on the same network as my phone the phone is lightening quick at sending data! Once connected it will show up as your only connected to a local network but it runs via an adhoc network so will only show a local connection. There are a few other minor connection details but you should find the answer with playing with it or just post on here and I will try to help.
I noticed many of the links around here are on low speed servers, Personally I fount it annoying. So I collected a whole bunch of links for various things and put them on my private server. I was able to Download at about 6MB/s.
LG Ally Source Kernel
Ally SDK (Includes Old Root Tools)
AllyRR Tool
Drellisdee's Rooted and Lite Custom Rom
Ally V8 Stock ROM
Ally 2.1 Stock Source Code
Velocity Rom 0.1.1
Feel Free to HotLink, and share these links. If any developer or creator would not like there product posted and shared here just let me know. The Links will be available all the time and there is no limits. You can download as many times as you want.
My LG Ally is stuck at the "VELOCITY" boot screen and is stuck in a loop. I had Velocity 0.3 flashed yesterday and I decided to re-flash today. I have tried wiping data/files/cache/dalvik cache. I'm stuck and I don't know what to do. Also I never did a Nandroid backup (because I'm slow).
View 16 Replies View Relatedi have an ATT xperia x10a flashed to 2.1 and rooted. I have titanium so i know the root worked. When i try to search for barnacle wifi tether in the marketplace nothing shows up? Also internet nor marketplace work without wifi, texting does though. There is no 3G or Edge symbols beside my bars either.
View 8 Replies View RelatedI've already flashed the prl and have the phone programmed on cricket but it seems like the data settings are locked. Im trying to change them to fully flash the lg ally and I also need to figure out how to change the mms settings.
View 1 Replies View RelatedI figured out how to full flash the LG Ally 740 to cricket but 3 out of every 5 phones I flash do not save the NV settings. When I go to manual programming (##program740 send) then select DATA. The MIP & DUN MIP settings always revert back to the default 0000000000@vzw3g.com settings. I've changed them in LGNPST,CDMA Workshop & QPST but still reverts back to VZW. It's rooted and tried several different ROM's to fix the problem. Could it be the kernel? If anyone can help, please let me know.
View 7 Replies View Related