I'm still new to this Rooting so I have a question. I've tried about 14 different ROMs over the past month or so. My Eris always freezes up when I set the OC past 787mhz. I have read where some people are using Kernals that let them OC past 800. Is this something I can flash to my Eris or is my Eris just limited to 787?
View 1 Replies
Is there any way to get a history of what I've downloaded in the past? When I had a Droid, I had downloaded a few apps, but now with my Eris (configured to the same gmail account), I'd like to see what I had previously downloaded on the Droid.
View 12 Replies View RelatedMy HTC Eris' battery went dead last night. I plugged it into the charger and tried to restart it, but it won't go past the Verizon Wireless screen. I've tried removing the battery numerous times, but it still won't go past that screen. Any suggestions?
View 1 Replies View RelatedWell, I've been noticing a few more problems with my eris as of late (if you want to know the others look at my post history)I've been unable to get past the lock screen to display sometimes. I just got off the phone with a friend, it was a long call as the phone/battery had heated up a bit. Now, everything with the phone seemed to be okay, I went and pulled up the HTC battery widget and was around 34C. I've seen it get this high before and had no problems. Now, I locked the phone and a few minutes later I tried to unlock it. The unlock screen would display but the touch screen wouldn't not receive any of my input. The Menu button did not work either. I could push the end button time and again and the display wound turn on and off, but no touch input ever worked. I just had to do a battery pull to get into my phone.
I've also been noticing inside TaskPanel that the amount of available memory steadily declines even if no programs are running. I have mostly sense programs ignored and I've included timerriffic and beautiful widgets as they are always running and need to be so they will function. (beautiful widgets I just purchased yesterday and I've had this problem for a week or two) If I do successfully get past the lock screen the phone will be extremely slow and TaskPanel will report something like 20 megs of available memory, with no applications running. If I restart the phone I'm usually fine. I think it is happening around the 13-14 hour mark of my phone being turned on.
I'm assuming something is hogging up my phone and I just can't tell what it is. I don't have very many 3rd party applications installed. They are closed immediately after I'm done with them except for beautiful widgets and timerriffic. I've had timerrific since the 2nd day I've owned my Eris and it's never been a problem (not to say an update didn't hose it)Anyone have similar problems? Anyone think of anything that could be causing this? [side note: I did notice a few weeks back my exchange calendar was freaking out and draining my battery, but deleting and resetting up my exchange email fixed that and it doesn't seem to be a problem now]
Can someone explain to me what a kernal is? and how do you flash things, like this kernal? ([WIP] [7/7] Higher framerate on Novatek panels | Kernel inside | Now for Froyo! - xda-developers) and does anyone know if Fresh 1.0.1 disables preflocks? and if it does, whats the downside of "flashing" fresh 1.0.1?
View 4 Replies View Relatedok so i get that everyone's phone reacts differently to different kernals. but what i'd like to know is what if i got a kernal that yields great results as far as performance, but drains the battery to quickly? im using chevy's ulv 1.25. will using set cpu to scale it back to 1.1 be as beneficial as using a new 1.1 kernal?
View 1 Replies View RelatedI have tried flashing several kernals with different ROMs, but more often than not, my phone just ends up restarting over and over. after i boot it, when i flash the kernal, I would be playing with it then all of a sudden it would freeze up on me and start boot looping. I have cleared the dalvik and cache before flashing ROMs and kernal. I rooted via 3.21 unrevoked and it says on the top of hboot s-off. The only kernal that has worked is netarchy-toastmod 4.1.8 bfs. any idea what i could be doing wrong?
View 22 Replies View Relatedflashed a new rom using rom manager. i thought i remembered seeing options to download from a list of kernals?
View 12 Replies View RelatedI recently installed one of Chevy's low voltage kernels a few days ago and have since experience extremely laggy performance, random reboots, and terrible battery life compare to what I used to get before I installed it. And most of that stuff has been happening even when I have it maxed at 550. How do I go about uninstalling this kernel?
View 14 Replies View RelatedI just got my droid (ONLY the droid, no battery, backplate, or charger) lol. I know irritating right. Well since I have a couple days before everything comes that I need, i am contemplating on which ROM to put on it. I have done some reading and seems that the majority of people are happy with BB (right?)
But my question is:
What about Kernals? I have heard to flash new Kernals for overclocking and such, but should I flash a different Kernal or do the ROMS already have the fastest Kernal installed on them? Not sure if this question makes sense, but I'm just trying to get the fastest ROM & Kernal available for my Droid.
Where can I installed the hydra kernals?
View 1 Replies View RelatedI'm bout to root, and wanna run a Hydra kernel, but I wanna know if the recent OTA could mess with the way the kernels work. More specifically the fact that the OTA brought 802.11N with it, yet the kernel has the option for it. Should I not use the Hydra with N? Just want to make sure having the OTA won't mess with any functionality of a custom kernel.
View 8 Replies View RelatedI have search for the best ROM, even in the rating thread and have not found a consistent consensus of what people think. I am looking for the newest kernals and the best ROM.
View 6 Replies View RelatedI am sure its not to complicated but still I would like to be filled.
View 23 Replies View RelatedFlashing kernals is new to me although general rooting is not. Apparently with my new Inc I have the slcd which will only work with a few kernals. What I had to do to get some new ROMs working was flash the ROM, then flash a specific kernal before booting up. That worked and I was able to flash some ROMs that I was not previously able to use. It has come to my attention that there are some kernals out there that are better for battery life so my questions are:
1) If I want to flash a new kernal over my existing ROM can I just do that? Boot into recovery and flash the new kernal? (After a nandroid of course.) Or do I have to flash the ROM again, then flash the new kernal and then boot up? Do I need to wipe anything before flashing a new kernal?
2) What are the best kernals for battery life that work with the slcd screen?
I rooted my Droid incredible 2 days ago so bare with me as I am still trying to understand all this new terminology and get the fullest use out of my phone. I was wondering about Kernals, overclocking and underclocking. I would like to increase my battery life as we all know how crappy it can be under normal use. I am running Skyraider 3.3 now because I enjoy the stock look of the HTC sense and I am using ADW.launcher as well. I downloaded a kernal for Skyraider but I can't tell what the speeds are and change them up. I saw a program called setcpu for rooted users on the market. Anyone have any experience with this app and is it worth the money? I am not wanting to slow down the performance of my phone but I still want to be able to have a good battery life. Anyone have any suggestions for a kernal to use or anyone using setcpu have a suggestions for a good speed to use.
View 4 Replies View RelatedI wanted to explore some of the different kernals in rom manager. LV vs MV, etc. Can I just install them on top of what I have? Do I have to remove a previous kernal some how, or just try them all out?
View 7 Replies View RelatedI was wondering how they actually reach their max speed? If you have a kernal that has 250, 600, 800, 1000, 1200. Does it start at 250 then go 600, 800, 1000, then finally hit 1200? Or does it jump to the necessary speed that your using (like start at 250 then it could go to 1000 then 1200)? Because if it has to go through each speed to get to its max, then a kernal with 5 different ones would be much better than 10 wouldn't it? I've never seen this question asked before, so does anyone know how they actually get up to their max?
Just so everyone knows I'm rooted and running overclock of 1200.. I have it set up. Just want to know how it works.
I just put Froyo 2.2 on my Moto Droid using this ROM: http://androidforums.com/roms-droid/127966-rom-stable-android-2-2-frg01-clean-untouched-virgin.html
And I used the 800mHz kernal found here:
How To: Get Android 2.2 (Froyo) On Your Motorola Droid Right Now! | TheUnlockr
I am experiancing a few freezing problems and bad start ups, but I am assuming these kind of surprises come with flashing different ROMs/kernals onto your phone. I noticed, however, that occasionally my screen will get really "twitchy" e.g. when I press a key on the android on screen keyboard it types the letter 4 times. or when i drag the notifications bar down half way and keep my finger still i can see the bar twitch up and down rapidly. I have heard from several review sites that twitchiness and stuttering usually have to do with the processing, which made me think of the kernal change. Does this mean i picked a bad kernal or a bad speed? If i get this twitching does it mean get a faster kernal or a slower kernal?
Can someone explain kernals? I recently rooted my phone and am running froyo, but I am still in the dark on what kernals are...
View 7 Replies View RelatedI ask for some clarification on ROMs, radios, bootloaders and kernals.I am currently running a rooted stock incredible. I want to try CM6, the 2.2 leak, and the 2.2 lite or Sky Raider. I know there are issues with having the right radio and kernal with all these. If I understand it right, the stock kernal will work with all of them. If I wan't to try another kernal I would be limited to kernals made to get along with those specific roms. Is this correct?I have the 1.x radio right now, which will work with CM6 right? If I go to the 2.2 leak it will upgrade it to 2.x, which will work with 2.2 lite or Sky Raider. However I am I right in thinking to go back to CM6 or stock from 2.2 leak I will have to downgrade the radio? Also, I will have to downgrade the bootloader as well?Whew, this is all so confusing.
View 10 Replies View Relatedi was wondering about the hydra kernals. I installed the latest overvolt hydra kernal. My question is when you go into idle, does it underclock for you? Or do you have to install undervolt to do that? Also can you install both overvolt and undervolt at the same time? (not literally at the same time but have both kernals at once to get the most power and battery saving?)
View 6 Replies View RelatedI rooted today (unrevoked 3 + forever) and I did a nandroid backup (thank god) and titanium backup. I tried to flash the undervolt (0.5) and overclocked (0.1, #1) hydra kernals on the phone but it gets stuck at the boot up screens. Am I doing something wrong? I put the zip on the root of my SD card and used Clockwork to flash the zip file. Should I just upload the HTC .32 kernal?
View 2 Replies View RelatedSo Im running stock rooted frg22 and was wondering if I could put overclocked kernals like slayers or something over it because I want to overclock and am satisfied with the stock froyo rom.
View 8 Replies View RelatedI know that it is possible to get past 30fps, but I am not in any way shape or form a techie so I dont know how to root or what a ROM is. Do I have to root to get a ROM? And also what exactly is a ROM and how will it affect my device? Just looking for a newb walkthrough. I know this may have been asked before but I really appreciate your patience in helping me.
View 5 Replies View Relatedon Fresh 3.1.0.2 what gives? every time i try through setcpu the evo reboots, then gets in a boot loop. any suggestions on how to fix this?
This may seem like an odd question, but, right now I'm using a late 2008 model Samsung Rant(I cannot wait to ditch it),I seem to have good 3G signal on it, but it seems to be sluggish at the start of using data.Basically what I'm asking is, have the 3G antennas used in phones improved in the last few years? Can I expect an upgrade in that manner or has it pretty much been the same technology for several years?
View 9 Replies View RelatedI have ran into a issue while trying to root my Droid. I was following the sticky and the first time I used RSD and loaded SPRecovery 2.1 SBF it failed. I got a Critical Error DEA1. I then booted the phone and ran the file again and it completed this time.I have powered down and held X each time and never get past this screen. I then went into the section on putting the stock OS back and I get the same issue. Is there anything I can do? I have been searching the forms, but I cannot find anything.
View 1 Replies View Relatedhow to achieve the "scroll past top" functionality that you see in some apps (like the HTC Sense email app for example) where when you scroll up to the top of the list and try to scroll up past that, it appears to pull down, and when you release it springs back up?
View 1 Replies View RelatedI started charging my phone (with the wall charger) around 12 last night and when I checked it at 10 this morning it was only charged to 40%. After texting a few people, etc. it went down to 30% while still on the charger but after I left it alone it went back to 40%. I turned the phone off and back on and unplugged it from the wall and plugged it back in and nothing's changing. This has never happened to me before.
View 1 Replies View Related