HTC Eris :: Changing Boot Animation - Zip File And ADB Shell
May 3, 2010
I have the VanillaDroid ROM installed on 2.1 v2. My phone is rooted. But I don't like the boot animation that came with the ROM, so I decided to change it. In every tutorial I've seen, people mention a "bootanimation.zip". However, I can't find it anywhere on the phone. But I did find the "bootscreen" folder in "/system/media/" with the bootup animations in it. I assumed that if I swap out the animations for the new ones, it would work (reasonable enough right?). Not really. Apparently, I deleted everything in the bootscreen folder, but when I try copying stuff into it from the memory card, it can't find any directory on the memory card through the "adb shell" stuff.
I know the folder with the bootscreen animations and stuff exists on the memory card, but apparently the shell commands say it doesn't exist. So now my phone boots up with no animation or sound. Its nice to have a quiet boot, and it does seem to start up a little faster, but I want a boot screen again. I know if I reflashed the ROM, it would come back (or at least should). But I don't want to have to reset and redownload all my apps and stuff, especially since I have just got everything the way I want. Is there anyway to get the bootup animations back without reflashing? And if I would reflash, since its the same ROM, would I need to do a factory reset?
View 5 Replies
May 5, 2010
I'm not sure how to set up the desc.text file could anyone help?
View 6 Replies
View Related
May 17, 2012
I have an app called Rom toolbox. Using this app I tried to install a boot animation. When I rebooted my phone I found that the boot animation is not installed.
View 4 Replies
View Related
Aug 14, 2010
I cant change the boot animation on 2. froyo.it shows up with a black screen on boot up.I know the boot animation in at system/customize/resources. I know im doing every thing right. Even if i change just one frame in the boot animation, it shows up with a black screen on boot up.
View 5 Replies
View Related
Oct 19, 2010
I just installed LeeDroid 2.2b on my Desire. When it starts, there's a screen that looks like a PC Bios screen that shows stuff being loaded. It plays R2D2 noises. That's followed by an ASCII Android picture and the LeeDroid logo. I'd like to remove all of that. Especially the R2D2 noises. I downloaded some boot animations and here's what I did:
- Created a folder called "local" in the "data" folder. (there was no "local" folder already, nor a "system/media").
- Dropped a bootanimation.zip into the "local" folder of the SD card, via USB (Windows). File was present on that folder.
- Rebooted
- Nothing happened.
Is it even possible to change LD's boot process? (I'm not sure if the BIOS screen is an animation or its actually calculating stuff, and will bork everything if removed). If Root Explorer, Android Mate or something like that works, great, as I'd prefer not to have to mess around with installing drivers and all that sdk stuff! But would they do anything different then I already did via USB, since I am able to place the file anywhere on the FAT32 partition? (Although if the boot file needs to be on the ext3 partition or otherwise outside fat32, that's another story.....). I wonder, has anyone succeeded at changing the boot process in LeeDroid?
View 4 Replies
View Related
Aug 3, 2010
I'm running Kangerade 2.2 rom and downloaded the goodies pack thats available. I tried to change my boot animation. It shows that the boot animation was switched to the folder but the old one stays. Do I have to manually delete the old boot animation first?
View 1 Replies
View Related
Oct 16, 2010
I've tried using ADB to push bootanimation.zip to my phone. The file copies properly without error but doesn't take affect when I reboot. I also downloaded the free version of Boot Animation from the market. It too reports success but doesn't actually change the boot animation. Has anyone had any success changing their boot animation?
View 49 Replies
View Related
Oct 11, 2013
Making boot animation? I need to know how to make the flashable zip file I already have the images created
I need them optimized as well, not sure what tool is needed or how to make it? Its for the SG4.
View 2 Replies
View Related
Oct 17, 2010
I have been unsuccessful in getting this to work.
xda-developers - View Single Post - Droid X R2-D2 editon boot animaion if anyone want it
xda-developers - View Single Post - R2D2 from StarWars
Has anyone been able to get it to work or can help me with it? I got the LWP and notifications to work but not the boot animation.
View 2 Replies
View Related
Mar 24, 2010
Maybe I missed this and if I did, can you please point me to the right link but just rooted and flashed to the latest ROM and wanted to know how to add the N1 boot animation instead of what is has now.
View 14 Replies
View Related
Jul 22, 2010
I pretty much have the custom boot animations figured out... It seems to work whether I put bootanimation.zip in /data/local or /system/media no problem... but the one thing I can't figure out is how to get a sound to play. I've tried every combination I can think of... boot.mp3 in the zip file, android_audio.mp3 in the zip file... tried the zip without the mp3, just placing the mp3 in the same directory as the zip (and also tried both names that way, in both directories stated above). Is there something I'm supposed to add to the desc.txt file? What am I missing? The only info I can find for the Eris is just "put a boot.mp3 in the zip file" which is just not working...
View 24 Replies
View Related
Jul 24, 2010
So I have own an android phone since December but just recently installed the sdk, rooted and been playing around a little. Please excuse me if this is a stupid thread but I just spent an hour making an animated gif, used sdk to push it to my /system/media/bootscreen folder and rename it boot.gif.
View 7 Replies
View Related
Mar 30, 2010
I created my own boot animation and I am having problems with it. As you can see in the video below, it flashes every time it starts a new folder (part0 and part1) and continuously flashes when it repeats part1. It is not only this boot animation though as I have tried others and they are doing the same thing. If someone could help me with this, EDIT: I have reset to factory settings and tried again to no avail. I don't know what the problem is.
View 4 Replies
View Related
Apr 25, 2010
I have a rooted eris running "Eris_Official_0.8.1T2" rom. I have seen threads about how to change the boot logo/animation, but no one knows how to remove the animation entirely. I would like the verbose boot to display on start up if possible. Has anyone done this? I have seen something similar with the android on iphone(at 1:53 in the video)
View 1 Replies
View Related
Aug 17, 2010
I had a problem and was wondering if you could help. I downloaded the Boot Animation Changer app because I wanted to d/l the mario bros. boot animation. It now is on my phone but after it runs my screen goes green for awhile as i frantically press buttons to get it back. I tried uninstalling the app but that didn't get my original animation backk. How do i do this?
View 1 Replies
View Related
May 4, 2010
Enter the following code into notepad and save as BootAnimation.BAT(I would save this to the desktop.)CHANGE THE 3RD LINE AS NEEDED FOR WHERE YOUR ANDROID SDK IS LOCATED
View 4 Replies
View Related
Aug 5, 2010
I rooted recently with the evil eris 4.0 running, and used this app Boot Animation Changer and it worked alright but I think I might of did a backup of one of the animations and overwritten over the stock, so stock isn't there. How can I get the stock back?I dont know what to do.
View 1 Replies
View Related
Mar 26, 2010
Since people are starting to make their own boot animations now, and this is something that everyone (not just root) can do to customize their Eris I thought it'd be helpful to start sharing them in one place. Also, since the name of the animation must be "bootanimation.zip" I have changed the names to avoid confusion when downloading, but it will have to be changed back before installing.
Installing the SDK and using ADB
1.) Make sure debug mode is enabled:
Menu -> settings -> Applications -> Development, Check the box for USB Debugging.
2.) Download the SDK from Android SDK | Android Developers
3.) Download HTC Sync from HTC Mobile Phone Support - DROID ERIS by HTC (Verizon) - Downloads
4.) Install HTC Sync (This takes care of any driver issues)
5.) Extract the SDK to any directory (C:Androids is easy to remember) and install.
6.) Open a command window (Windows key + R -> Type "cmd" hit enter)
7.) Navigate to your SDK ools Directory
Code...
View 49 Replies
View Related
Jun 9, 2010
The topic says it all. I love 2.1 on the Droid Eris, but miss the little green guys that peek out at you and the sound they make during boot up. Any way to bring them back on a 2.1 setup without root?
View 17 Replies
View Related
Sep 23, 2010
Is there a way to change the boot animation easy like the one click root method or a thread with easy detailed instructions if there is sorry i have not seen can u share the link .
View 3 Replies
View Related
Sep 20, 2010
My Droid Eris started a boot loop about 2 days ago (the usual complaint - the skateboarding droids, the htc logo, then verizon and htc endless loop). I went to do a soft reset, removed the battery, did a hard reset, nothing works - but here's the kicker - when it loads the fastboot/recovery/clear storage/simlock screen, it says that my file PB00IMG.zip is the wrong image and jumps off the screen within 2 seconds as it loads. I cannot get my computer to mount either - it does not always recognize it, and when it does, it will not let me in to the SD card to overwrite another one. Periodically, it even gives me a lovely phone with red triangle and an exclamation point.
If I had to guess, I'm assuming that that file is the core to me booting the OS (which is still the stock OS at this point)...but somehow it is not working. Or maybe its more than just that...I'm not really sure what to go into next - I know more about playing with registry errors on a desktop than phone software - but I'm willing to tinker and learn. I'm open to any ideas since I have a backup phone temporarily while I make it the 7 days to my next upgrade, but would really like to get this one working if I can. I can't send it in to verizon, since they are saying that it is "water damaged" (even though it has never touched water!) and want to charge me 90 dollars for a refurbished one.
View 5 Replies
View Related
Nov 2, 2010
I have a TabHost activity with two child activities. What would be the best solution to add a "left - right" animation for the child activities?
View 1 Replies
View Related
May 22, 2012
I want to change my screen off/on animation from the stock GB animation to this one from Sony.URL....I attached the Sony Services.jar and the Framework-res.apk. The animation must be in there, right?I want to port them to my I9000 running Slim ICS. For example wich files I have to copy?
View 1 Replies
View Related
Oct 3, 2009
I've seen on YouTube quite nice animation as browser changes from portrait to landscape. I don't get this, even after selecting 'show animation' in settings. How can I get this?
View 3 Replies
View Related
Jul 28, 2009
I am working on camera preview. I want to change the standin animation and want to put my own animation.
View 3 Replies
View Related
Jul 15, 2010
I am looking for this boot animation I seen a while back where the Android Bot is waving and making these weird sounds. Its like this but without the eye. http://img59.imageshack.us/img59/8780/boot.gif
View 2 Replies
View Related
Jun 24, 2010
You Tube - Change Boot Animation on Android Phone *non-rooted* on a mac.
View 5 Replies
View Related
Oct 25, 2010
I just got a used Nexus One off of e bay. It came rooted with the Cyanogen Mod on it. The only thing I miss is the old boot animation http://www.youtube.com/watch?
View 1 Replies
View Related
Sep 17, 2010
If i wanted to delete a boot Animations how do i do that i use root explorer but i t wont allow me to remove the zip file it says "cannot be deleted file system is read-only" what to do?
View 1 Replies
View Related
Jul 28, 2010
I am trying to execute a shell script from application using
java.lang.Process API.
The script file is executing properly as i am able to get logs but the line
*$SETPROP net.if.default rmnet0* * * is not getting executed.
has anyone able to execute .sh file from application succesfully.
Code Snippet: *//* *str={"/system/bin/sh","/sdcard/test.sh"};* *Process p = Runtime.getRuntime().exec(str);* * * *//* * * test.sh: LOG=/system/bin/log SETPROP=/system/bin/setprop $LOG -t test"++Setting up default iface"
$SETPROP net.if.default rmnet0 $LOG -t test"++Setting done "
View 5 Replies
View Related