General :: Rooted Nabi 2 - Some Apps Don't Work Correctly
Jan 28, 2013
I rooted using the nabi lab 2 (URL....), after a prior root, gapps installation which had the update issue. I am on the current .37 update.I downloaded dragonbox from the play store, and it loads but nothing on the screen responds to touch. Is there a way I can force this app to work on the Nabi? Or is this an issue with the software? (I'd be willing to get to the bones, rid the Monarch UI, etc. to have better functionality of the Nabi).
View 1 Replies
Jul 24, 2013
I use the Now TV and Wuaki.TV apps on my Note 2. When I am on stock firmware, kernel and recovery and not rooted, they work fine. But when I am rooted or on a custom rom, they don't work. I know this is because I am rooted/modded (because the app makers indicated they check for root access).
View 4 Replies
View Related
Nov 7, 2012
I'm getting an "insufficient storage" error on installing apps from Google Play (even small 6mb apps). I find if i delete several apps and run it again it works (there is apparently 470MB free despite this).
I've seen references to changing settings so that Google Play installs to the SD card but cant figure out which apply here. And also to clearing the cache for applications (in the TWRP app perhaps?).
I've run the jmz script from the Nabi 2 root thread, but I think I'm missing a step or two (although apps do in fact install, which they wouldn't before).
View 8 Replies
View Related
Apr 24, 2012
I bought a Galaxy Note GT-N7000 in Indonesia. (PDA: N7000DXLC2, PHONE: N7000DXLC1, CSC: N7000OLBLC2). The installed languages are asian languages (+English), so I would like to change the firmware to a European version, since I would like to have Hungarian language on the phone (especially but not only because I would like to be able to type messages with Swype). My plan is to change to this one: N7000XXLA6, N7000OXXLA1
The question: The new firmware belongs to a different location than the old one.
View 3 Replies
View Related
Jan 24, 2014
I have a rooted mytouch 4g slide phone that seems to work fine but when I try to use certain apps that require root (for example "extended power menu") it doesn't work. here is a quick video : [URL]
View 9 Replies
View Related
Apr 8, 2010
I've got my phone up and running with sense-able 2.0 but for some reason swype is not working correctly. It never seems to make the line all the way to the letter I'm trying to type. Its like this for every letter. Its especially missing the last letter it usually ends up a couple letters away from where I end up. I was using it just fine when I wasn't rooted and on 1.5 but now its giving me problems. I've even tried playing with the settings and it doesn't seem to help. I'm wondering if anyone else has had this issue. I guess I'll try uninstalling and reinstalling it.
View 6 Replies
View Related
Oct 16, 2012
I recently purchase a nabi 2, followed post instructions " Nabi 2 Root and Gapps Install ".
I used option 1) worked until Team Win Recovery loaded, error can't find gapps. I went install found gapps.zip in /sdcard ran it, worked. Than I used option 2), it did a backup couldn't find root.zip error, so use install option in recovery found root.zip on device ran it..
My backup is stock with gapps...
I have a rooted nabi tablet 2 with google apps on to stock rom ..
I notice stockimages files are available here, how i use the to return to stock ?
Would like to install all updates first, then root with gapps.I've rooted 2 htc hero, nook color, 2 nook tablets...
View 2 Replies
View Related
Feb 23, 2014
I did the update here - [URL]...
And removed twrp. Obviously with my lack of knowledge I
made a mistake. Now I have stock recovery and the nabi freezes on the boot logo. getting it booting again or getting twrp back on.
View 9 Replies
View Related
Feb 15, 2014
What is required to root my Nabi 2. I actually only want to root the device so that I can use the foldermount app to move app data to the SD card.
A lot of the info I can find seems to be pre-OTA (well, the latest one anyhow) and I'm not sure if that invalidates the instructions.
My device: -
Stock everything as per latest OTA update.
NABI2-NV7A - US
Android 4.1.1
Build JRO03C
View 1 Replies
View Related
Oct 10, 2013
I just installed the 2.1 update on my child's Nabi 2. I would like to root it so that she could have some of the apps in the Google Play Store. Can I use Nabi Lab 2 to root it, or has there been an update since then? I download Nabi Lab 2, and it said in the instructions that I needed to be on version 1.9.37 so I was afraid to use it. how to root my Nabi 2 with the latest update on it.
View 9 Replies
View Related
Dec 28, 2013
I wanted to upgrade my Nabi with the latest OTA. I had TWRP 2.2.2.1. I used it to revert to an old backup. After the restore, I tried to apply the OTA updates. After it rebooted and started the install I got an "!" Android logo.
I power cycled and I was able to boot back in. I noticed I still had the Play Store app (which will not work, error about connecting to services) and suspect the "stockunrooted" restore I used may not have been completely "stock". I did lose root and TWRP though.
I tried to reinstall TWRP again, but it appears that Fastboot no longer works since the restore. The tablet just hangs on the Nabi logo indefinitely. When I press Vol - & + with PWR, and select Recovery Mode, I just get another "!" Android logo (is this stock recovery?).
ADB works, it sees the tablet and I'm able to push, access shell etc. I used motochopper to root the Nabi again. I tried installing flash_image to manually flash a new TWRP recovery.img, but running the command I get an error about "error scanning partitions".
I'm not sure what else I can do to get Fastboot working or a recovery system installed again. OTA upgrade will not apply, and I'm stuck on 1.9.37 at this point.how I can get Fastboot fixed and the Nabi back to "normal" / upgradeable.
View 3 Replies
View Related
Nov 23, 2013
Lost wifi again! was doing the normal backup and return to stock again to get the wifi back and it packed up on me, no longer accepting touch input. So I am stuck can't try to reload it, in the hope its software. Right now its version 2.0.5 or something like that. Can't use the recovery since the touch is not working. Is there any working non-touch recoverys or is there a stock like firmware that can be loaded with out twrp touch. I still can fastboot flash the recoveries none work I have tried all the twrp version I could find.
I can plug a mouse in with a usbtg adapter but that is not useable in twrp.
I have opened it up to make sure a cable was not loose on the screen, and it was not dropped or broken in anyway.
View 9 Replies
View Related
Aug 3, 2010
Since upgrading to FroYo, the stock youtube app doesn't work correctly. Most of the time I can't hear any sound at all no matter what setting the media volume is set to. The times I can hear sound it isn't audible and very very quiet. Does anyone else have this problem?
View 8 Replies
View Related
Mar 16, 2010
So does the youtube app work correctly on the phone now if at all that its rooted to 2.1? I may just root to kill that lil bugger out of spite.
View 2 Replies
View Related
Sep 9, 2010
Youtube app has never worked correctly and now doesn't work at all Since I've had the droid x the youtube app had given myself and others the log in problems where you try to log in and it will log you in"username@youtube.com" how and why does it even do this? The error "There is a problem with network response" I've had since the beginning aswell only now force closes on it self.
View 1 Replies
View Related
Oct 20, 2010
I have Flashed the LeeDrOiD v2.2b ROM and when accessing the Stock browser it will randomly crash, it's a strange crash because normally a crash will mean that you will exit from the browser and next time it will load to the homepage, on mine though it will sort of crash but then load the page I was on, even if it wasn't my homepage, if I had any tabs open I would also lose all of those, which is how I know it's crashing.
This isn't specific to this version of the ROM though as I've had this since v1.4, when I asked in the XDA forums they said it might be to do with re-installing my backed up data, basically I went from Android 2.1 to 2.2 when I Flashed the ROM and they said that backing up data when crossing over Android versions could cause problems.
What I have done this time though is not backup anything, no SMS, no system settings, nothing! I deleted everything off my SD Card, cleared the cache, then cleared the Dalvik cache, did a factory reset, Flashed the ROM and then Flashed the radio but still this problem exists, I haven't backed up anything this time, although when I logged into the Market with my Google account it synced my contacts back onto my phone, as they're linked to my Google account somehow.
This is really starting to annoy me now but I can't figure out for the life of me why it happens, I've tried replicating it to narrow down the cause but I can make it happen one time doing it a certain way but then doing it that way again it'll be fine.
Has anyone got any ideas of how I can overcome this problem or how to Flash the ROM so that my browser will work correctly, this browser problem is the only problem I have with the ROM, apart from that it is superb.
Any help very much appreciated!
EDIT: Also, the browser can crash whether I'm connected to a data plan/Wi-Fi or not!
View 9 Replies
View Related
Jul 30, 2010
I have tested on the simulator motorola provides and on various hardware (Droid, Nexus One, G1,wildfire) but can't reproduce anything. Wondering if anyone else has had any issues.
View 4 Replies
View Related
Aug 16, 2010
I want to keep the phone from ringing during my meal times, so I have set a profile called "Meal." I have it set to Silent mode and have turned media volume to zero (I use an MP3 song for my ring, so I figured doing both would be safer). I have set the rule to activate "Meal" from 18:00 to 19:00. I set this up over the weekend, but I got a call tonight (and it rang) at about 6:50 (18:50). Am I missing something in my settings? I have the full version, not the trial.
View 7 Replies
View Related
Feb 11, 2014
There is a TV channel which have just released an android app to watch shows.
[URL]
The sad thing is an error pops up when I try to stream videos saying it won't work on a rooted device(which my Note 2 is). I tried following the guide for HBO nordic [URL] but I couldn't find the function that would be similar to checkRoot() . how to find it?
View 1 Replies
View Related
Nov 23, 2012
Is there any good status bar replacement app that can work with non rooted phone?
View 1 Replies
View Related
Oct 7, 2009
i want to keep cancel button in the title bar at the right side, but i am getting the icon at the left side of title bar. Is this a bug or something else is required to accomplish this?
View 2 Replies
View Related
May 30, 2010
I have a ListView, which has a TextView and a RadioGroup with 4 RadioButtons as Children in each row. Now i can select a RadioButton in each row. But if i scroll the ListView, my Selection is gone or it does not show correctly. For example, i choose the RadioButton A in the first row, if i scroll through the ListView and then go back to the first row again, either none of the RadioButtons in the RadioGroup is checked or RadioButton C is checked instead of A.How can i fix this Problem? I have tried 7 days already, but still i find no solution.
View 1 Replies
View Related
Jun 8, 2010
I have a ListView, which contains an EditText in each of it's row. I also have an Array.The length of the Array==the Nr of the rows in the ListView. I want to store the user input (the text in the EditText) to the Arrray. E.g, if i type some text in the EditText in the first row of the ListView, i want the text to be stored in Array[0]. But how can i detect to which row the EditText belongs to? I can detect the possition of the row if the row contains a RadioGroup, but not a EditText. What if i first type some text in the EditText and sometime later i want to update mein Input? How can i update it?
View 1 Replies
View Related
Dec 9, 2009
Has anyone noticed that when you do a search for a specific app it will say "X amount" results for "(whatever you searched for)" sometimes it wont load the number of apps it found for what I searched for. I have to perform another search for something else and try it again before it will display the apps results.
View 2 Replies
View Related
Nov 2, 2012
Ive been trying to root my Nabi 2 tablet to access the Google Play Store. Ive downloaded ADB and followed instructions, Ive also got the correct drivers etc, when i ran the root tool by jmz I chose option 1 and it ran through the process, is there anything else I need to during during this as I then booted up and it was just the same as before?! Im normally an apple fan and experienced in jailbreaking etc but this is my first android as Im trying to exchange all my apple devices for android find a step by step full tutorial as Ive been trying to follow the one in this link here [URL]... but I cant understand what else I need to do?!
View 9 Replies
View Related
Nov 27, 2010
I am trying to get a profile setup for my wifi but that doesnt seems to work very correctly
Here is what i did
Cell near<scanned cells near my house> ---> wifi set on
Wifi near<my SSId>
<-- wifi set off
Now i did this thinking if in my area using scanned cells plus in range of my wifi----> it should turn on
And if the above criteria doesnt match then it should go off
Please advise if i am doing it wrong
I was also thinking when i reach back home phone should say welcome home or something ( was trying just for fun) but that doesnt work properly either i was using it with my wifi profile but the it keeps on reading the message few times i was thinking everytime phone changes the cell it reads the message to me.
View 3 Replies
View Related
May 6, 2012
Can .zip bootanimations work on rooted wildfire s with stock Rom and that splashscreens also in .zip work or not and if so any cool splashscreen......
HTC Wildfire S A510e using xda premium
View 2 Replies
View Related
Apr 10, 2012
Just finished unlocking the boot load and rooted my GN using the GNEX toolkit, and restored my apps fine.
However, Dropbox did not seem to work properly. I was able to login, but couldnt access my files correctly. For example, I was able to open my Keepass file, but not able to save any changes...it would just complain about not being able to save.
I've uninstalled and reinstalled both Dropbox and KeepassDroid, with no success. The wieird thing is I also tried to browse the SD Card using ES File Explorer, and I'm not able to delete the Dropbox .thinkfree directory, nor am I able to delete/copy/move/rename the local Keepass directory and file...it just complains that it cannot perform the operation
View 3 Replies
View Related
Aug 2, 2010
Anyone found a good lock screen replacement? Ive tried LockBot and Lock 2.0 neither seemed to work correctly on the X.
View 18 Replies
View Related
Feb 13, 2012
I have a galaxy s phone with darky's ROM v10.0 RC final. evidently it is rooted but some apps don't recognized it as a rooted phone. first, when i ran the superuser it fails and said com.noshufou.android.su is failed to work...and then theres a notificaTION that su binary is outdated but i tried to update it a million times but always failing, tried this su update fixer but still negative results. downloaded busybox installers the first one also failed to install busybox saying the directory where i want to put it has a problem, tried to put it to other option directory but still negative. the other busybox installer says that my phone is not rooted. how come this happens when titanium backup recognized my rooted phone.
View 1 Replies
View Related
