I did the update here - [URL]...
And removed twrp. Obviously with my lack of knowledge I
made a mistake. Now I have stock recovery and the nabi freezes on the boot logo. getting it booting again or getting twrp back on.
View 9 Replies
What is required to root my Nabi 2. I actually only want to root the device so that I can use the foldermount app to move app data to the SD card.
A lot of the info I can find seems to be pre-OTA (well, the latest one anyhow) and I'm not sure if that invalidates the instructions.
My device: -
Stock everything as per latest OTA update.
NABI2-NV7A - US
Android 4.1.1
Build JRO03C
I just installed the 2.1 update on my child's Nabi 2. I would like to root it so that she could have some of the apps in the Google Play Store. Can I use Nabi Lab 2 to root it, or has there been an update since then? I download Nabi Lab 2, and it said in the instructions that I needed to be on version 1.9.37 so I was afraid to use it. how to root my Nabi 2 with the latest update on it.
View 9 Replies View RelatedI recently purchase a nabi 2, followed post instructions " Nabi 2 Root and Gapps Install ".
I used option 1) worked until Team Win Recovery loaded, error can't find gapps. I went install found gapps.zip in /sdcard ran it, worked. Than I used option 2), it did a backup couldn't find root.zip error, so use install option in recovery found root.zip on device ran it..
My backup is stock with gapps...
I have a rooted nabi tablet 2 with google apps on to stock rom ..
I notice stockimages files are available here, how i use the to return to stock ?
Would like to install all updates first, then root with gapps.I've rooted 2 htc hero, nook color, 2 nook tablets...
I rooted using the nabi lab 2 (URL....), after a prior root, gapps installation which had the update issue. I am on the current .37 update.I downloaded dragonbox from the play store, and it loads but nothing on the screen responds to touch. Is there a way I can force this app to work on the Nabi? Or is this an issue with the software? (I'd be willing to get to the bones, rid the Monarch UI, etc. to have better functionality of the Nabi).
View 1 Replies View RelatedI wanted to upgrade my Nabi with the latest OTA. I had TWRP 2.2.2.1. I used it to revert to an old backup. After the restore, I tried to apply the OTA updates. After it rebooted and started the install I got an "!" Android logo.
I power cycled and I was able to boot back in. I noticed I still had the Play Store app (which will not work, error about connecting to services) and suspect the "stockunrooted" restore I used may not have been completely "stock". I did lose root and TWRP though.
I tried to reinstall TWRP again, but it appears that Fastboot no longer works since the restore. The tablet just hangs on the Nabi logo indefinitely. When I press Vol - & + with PWR, and select Recovery Mode, I just get another "!" Android logo (is this stock recovery?).
ADB works, it sees the tablet and I'm able to push, access shell etc. I used motochopper to root the Nabi again. I tried installing flash_image to manually flash a new TWRP recovery.img, but running the command I get an error about "error scanning partitions".
I'm not sure what else I can do to get Fastboot working or a recovery system installed again. OTA upgrade will not apply, and I'm stuck on 1.9.37 at this point.how I can get Fastboot fixed and the Nabi back to "normal" / upgradeable.
Lost wifi again! was doing the normal backup and return to stock again to get the wifi back and it packed up on me, no longer accepting touch input. So I am stuck can't try to reload it, in the hope its software. Right now its version 2.0.5 or something like that. Can't use the recovery since the touch is not working. Is there any working non-touch recoverys or is there a stock like firmware that can be loaded with out twrp touch. I still can fastboot flash the recoveries none work I have tried all the twrp version I could find.
I can plug a mouse in with a usbtg adapter but that is not useable in twrp.
I have opened it up to make sure a cable was not loose on the screen, and it was not dropped or broken in anyway.
Ive been trying to root my Nabi 2 tablet to access the Google Play Store. Ive downloaded ADB and followed instructions, Ive also got the correct drivers etc, when i ran the root tool by jmz I chose option 1 and it ran through the process, is there anything else I need to during during this as I then booted up and it was just the same as before?! Im normally an apple fan and experienced in jailbreaking etc but this is my first android as Im trying to exchange all my apple devices for android find a step by step full tutorial as Ive been trying to follow the one in this link here [URL]... but I cant understand what else I need to do?!
View 9 Replies View RelatedI'm getting an "insufficient storage" error on installing apps from Google Play (even small 6mb apps). I find if i delete several apps and run it again it works (there is apparently 470MB free despite this).
I've seen references to changing settings so that Google Play installs to the SD card but cant figure out which apply here. And also to clearing the cache for applications (in the TWRP app perhaps?).
I've run the jmz script from the Nabi 2 root thread, but I think I'm missing a step or two (although apps do in fact install, which they wouldn't before).
I've bought an Android Tablet a few months ago, there was an update recently, and my tablet stopped working, it doesn't pass the boot image. I don't know which model is my tablet (chinese tablet i guess). I've taken some pictures of the tablet.
View 2 Replies View RelatedI have a rooted HTC Desire s, I did a software update through "phone, info, check for updates",(android 2.3.5 sense 3.0) now my phone wont boot, it's stuck on the HTC boot screen., I've tried updating from SD card (various custom stock roms) but I always get an error message.
Phone info:
-Revolutionary-
SAGA PUT SHIP S-OFF RL
HOOT-6. 98.1002
RADIO-38.02.00.11_M
eMMC-boot
Mar 10 2011, 14:58:38
I've been trying to root my Nook Tablet to CM10 unsuccessfully. I found this [URL]..... which led me to believe that downgrading to the 1.4.0 update would be useful.
I followed the link from this, [URL] ..... and downloaded the .zip and put it on an mSD. I proceeded to place it in the tablet, turned it on, and the update went through and my screen went black. After a minute or so I hit the power on button, and nothing happened. Nothing works on it now. I've tried hitting the power button for 20+ seconds then the 2 seconds, as well as the power + N button. The screen remains black. I can connect the nook to my computer and the power cable lights up, as well as when it's placed on the wall.
The Nook Tablet (it's a BNTV250) isn't turning on.
i was trying to update my SGS2 to ICS by myself using Odin, but something went wrong and now i can not get the phone start at all . and i get an icon for a phone and a PC and a warring triangle to show me that the connection is lost
View 6 Replies View RelatedI received an OTA update, however, it is continually failing upon reboot. I discovered that I can't get my RAZR M into recovery.
I would flash TWRP recovery, however, I then would no longer receive OTA updates.
Is it possible that I may have 'locked' myself out of recovery?
My M is rooted; I've been able to get to recovery previously, though do I need to perm unroot my M?
Is it possible to re-flash stock recovery? If so, how?
My phone:
Moto Droid RAZR M
Stock ROM, rooted
Stock recovery
BusyBox 1.21.1
SuperSu
Voodoo OTA Rootkeeper
I have an unlocked HTC Sensation and when i updated it when it was rebooting it got stuck at the htc screen for ages soo i took the battery out and now it gets stuck at the boot screen with the htc on it I Really am unclear
View 1 Replies View RelatedI had my Galaxy Pocket rooted and got the Jellyblast v3 rom, it was doin fine until I checked on the app OTA and check for update, a new update appeared which is the Nemesis 2.5 Hybrid-Holo Editon. It asked me to download it and so I did. When it was done, it asked me if I wanted to install it and so I did, and rebooted. Later I noticed that it was already boot looping. I tried pulling the battery off and to clockwork mode, with the proper procedure..the holds and presses, but still it just kept boot looping. Tried to connect it to the PC using the USB chord and yet it just shows the charging icon and sooner it turns to white. I tried Kies but still it turned white screen all over again; no device found.
View 8 Replies View RelatedI tried to force ics update to my phone and it is stuck on the big Motorola M screen. ive tried to flash the update just like you would a rom and it didn't work. it was my only option cause the guide i was following was for a pc and I own a mac so the utility provided wouldn't open on my computer. after it didn't work i tried a factory reset but that hasn't done anything. what can i do? the sd card wont mount on my comp so i cant put anything on that.
View 1 Replies View RelatedI am trying to get a friends Nexus 7 up and running. I recently rooted it and installed the custom recovery using my Mac with this guide while the tablet was on 4.3. All was well, but then my friend was given the option to install the 4.4 Kitkat update. After the update, the tablet has been unable to boot - it simply hangs at the startup animation. I am able to enter the recovery boot loader, and enter options to restore from a .zip, however I have no way of accessing the tablet's memory from my computer to put the original operating system back on it- although I think it could be done from Terminal, I am not well versed in command prompts.
View 3 Replies View RelatedI have a Nabi 2 that was rooted almost a year ago to gain access to the Google Play store.My needs have changed since then and I wanted to restore it to factory settings.
If I boot normally the Nabi is stuck here:
I have managed to get it to boot to TRWP by pressing the power and + keys. I see this:
There are no images to "restore" under the restore tab. This is what I see:
provide me with a kernel file or some tips on how to restore the machine to it's 'out-of-the-box' configuration. I want to donate this device to a young child and need to get it back into a kid friendly mode.
I followed the instructions in PC companion and after the last screen with disconnect the cable and boot up it started u fine but then nothing happens, this was an hour ago. Anyone had the same problem?
View 6 Replies View RelatedI try to understand android boot sequence on my JB (under CM10). I found some docs and there should be specific partitions (boot, recovery, system, cache, data).
My understanding of the boot sequence is now:
A) normal boot:
1) Power ON ->
2) bootloader ->
3) boot-partition where i flashed the kernel aka boot.img ->
4a) system-partition with the OS (libs, UI, etc) where i unpacked over CWM my customROM.zip ->
4b) data-partition, where i unpacked google-apps.zip and installed all the apps ->
4c) cache-partition with user data
B) recovery boot (adb reboot recovery):
1) Power ON ->
2) bootloader ->
3) recovery-partition with CWM where i may unpack all the .zip stuff to proper partitions, or restore from sdcard, etc.
Is this correct? I wonder, because i didn't installed CWM into recovery-partition. It cames from install of CM10 (fastboot -i 0xfce flash boot boot.img), so it must be in boot-partition and not in recovery?
So, next confusion: i looked up to /proc/mtd and i don't see neither boot nor recovery partition here:
Quote:
# cat /proc/mtd
dev: size erasesize name
mtd0: 19000000 00040000 "system"
mtd1: 00600000 00040000 "appslog"
mtd2: 06580000 00040000 "cache"
mtd3: 1a400000 00040000 "userdata"
I did a backup with CWM and loocked the data. There aren't boot, and recovery backups:
Quote:
# ls -lha /sdcard/clockworkmod/backup/2012-10-04.18.49.55/
d---rwxr-x 2 system sdcard_r 4.0K Oct 4 18:56 .
d---rwxr-x 3 system sdcard_r 4.0K Oct 4 18:49 ..
----rwxr-x 1 system sdcard_r 1.6K Oct 4 18:54 .android_secure.vfat.dup
----rwxr-x 1 system sdcard_r 54.6M Oct 4 18:55 cache.yaffs2.img
----rwxr-x 1 system sdcard_r 360.2M Oct 4 18:53 data.yaffs2.img
----rwxr-x 1 system sdcard_r 212 Oct 4 18:56 nandroid.md5
----rwxr-x 1 system sdcard_r 214.6M Oct 4 18:51 system.yaffs2.img
#
So, i think i didn't understand the boot sequence and partition schema corectly.
I am trying to do some low level performance testing related to device processor cores through adb which I feel it is affected by Android background services and system stuff.
As I know that the Android boot sequence stages are as follow:
1.Execute Boot ROM code.
2.Execute the boot loader.
3.Load the Linux kernel.
4.Launch Zygote, which initializes the Dalvik VM.
5.System server which loads the Android system.
So my question is how can I interrupt this sequence to force it stop on stage 3 to load Linux kernel. This can implement my intermediary performance testings before loading again Android system.
Does Fastboot or Clockworkmod recovery can load my device to a kind of Linux kernel?
Instead of seeing the boring old Android logo or my service provider's logo, I'd love to see the standard text-based Linux boot screen that shows the status of all the hardware and configuration info as my phone boots. My current phone is an HTC EVO 3D running Cool ICS with Sense 3.6 and Revolutionary CWM.
View 2 Replies View Related huawei u8860:
i compiled a kernel from the sources kernel-3.0.8-U8860-IcecreamSandwich.tar.gz .
on virtual box ubuntu 10.04 (oracle java 1.6.0u33 )with
Code:
gcc -v
x86_64-linux-gnu
gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5.1)[code]......
so this may be a dumb question, but how do i update the boot loader or recovery. I'm using clockwork, and m assuming there's probably been an update for it. ive read about amon ra or something? sorry if I'm incorrect. I am just not sure if my phone is wiping dalvik correctly.
View 31 Replies View RelatedSo prior to manually installing the 2.2 update, I had a custom boot animation with sound. The update ran fine, no issues, and I knew I would have to re-install the custom boot animation files. However, I followed the same steps as I did prior to 2.2 (see below), and again, no errors. After reboot, I'm still seeing the Sprint 4G boot screen. Can anyone else confirm? Looks to me like it's been locked down.
From XDA:
adb push bootanimation.zip /data/local
adb push android_audio.mp3 /data/local
adb reboot
I just did the OTA update on my droid x it downloaded and restarted went through the whole process and restarted again. now it wont load past the moto logo . iv been waiting for a hour! i just pulled the battery and that didn't help either.
View 3 Replies View RelatedI have last night updated my X10i through SE US to Android 2.1. Following from here I cannot get past the boot screen, it switches on, but stays blank and does not do anything else. I have tried to re-install / repair through SE US (PC Companion does not work in this case) to flash it once again, and also that did not help. It keeps telling me that everything is fine, and I should just switch on my mobile phone.
View 4 Replies View RelatedNo major issues, but my startup screen does seem to take a LOT longer before the phone actually loads, and once it does none of my buttons/widgets appear for another 5-10 seconds. Additionally, once in a while when exiting a program none of the buttons are on the home screen for 3-5 seconds, and sometimes a Force Close error pertaining to the home activity will pop up ... anyone else experience anything similar, or even just notice a longer boot time?
View 1 Replies View Related, i followed the directions for updating the droid to 2.1. Now stuck in a boot loop. The firmware updated fine and didn't indicate a failure, after i updated i did the reboot from the menu. I've reflashed 2-3 times now and it does not come back, and i've pulled the battery more than a few times.
View 5 Replies View Related