General :: Nabi 2 Bricked - Stuck / No Touch Input
Nov 23, 2013
Lost wifi again! was doing the normal backup and return to stock again to get the wifi back and it packed up on me, no longer accepting touch input. So I am stuck can't try to reload it, in the hope its software. Right now its version 2.0.5 or something like that. Can't use the recovery since the touch is not working. Is there any working non-touch recoverys or is there a stock like firmware that can be loaded with out twrp touch. I still can fastboot flash the recoveries none work I have tried all the twrp version I could find.
I can plug a mouse in with a usbtg adapter but that is not useable in twrp.
I have opened it up to make sure a cable was not loose on the screen, and it was not dropped or broken in anyway.
View 9 Replies
Apr 14, 2012
I attempted to install transparent cm7.2 status bar and phone bricked (fastboot). I fixed it and installed other phone model's cwm with windows cmd command (stupid, I know). After this I'm always stuck at lg screen. Can't get into recovery either. Lg update tool does not find the phone, neither does cmd.exe. I sometimes get the ''colored snow screen'' or whatever I should call it. But it doesnt change the fact that the phone can't be recognized by anything.I can't turn the phone in any mode, it always starts with the lg screen.
View 8 Replies
View Related
Nov 20, 2013
I bricked my alcatel by deleting a folder which apparently was vital for android. Is there any way to unbrick it without paying a visit to alcatel's service? I need PWM or TWRP to flash it with the stock rom, right? Unfortunately I hadn't installed either, so is there any other way to flash the stock rom now?
View 9 Replies
View Related
Jan 21, 2014
Recently I have rooted my android tablet and I was exploring what I could do. One guy was telling me about an app that can work with performance in game(ChainFire 3D). He said it lowers the pixels in the game to run better. I tapped the install button and it said rebooting now. It then started to reboot but then proceeded to get stuck at the boot screen. I tried doing a hard reset but it is still stuck. I have also tried flashing the stock rom, but I get installation aborted when I try and install it.
View 4 Replies
View Related
Apr 27, 2012
So I was trying out the CM7 for xperia arc by the freexperia team. It was epic. so i also tried the CM9 release by them..
-> I downloaded the CM9 anzu for my arc S
-> Extracted the files
-> Used fastboot to flash boot.img
-> And then: fastboot reboot
Instead of the FreeXperia splash screen welcoming me.. i was given a black screen.. The phone does turn on.. but then there is nothing. No splash screens. nothing.
Is there anyway to boot straight into CWM?? recovery?? Did i brick my phone for good?
View 2 Replies
View Related
Dec 24, 2013
I have a Double Power EM63 tablet from Walmart. I believe it is identical to the Ematic EM63 and the MID-AM789 (Google "AM789" for specs since I apparently can't post links yet). I rooted it using Shaume (It's not in english, I just clicked the button that said "root"). I was trying to improve the tablets gaming performance, so I installed the Chainfire 3D driver, and now my tablet won't boot. It gets stuck on the "DOPO" logo, never gets to the boot animation. I can enter recovery mode, so I tried the "wipe/reset" option, but it didn't work. I think I need the stock ROM or a compatible custom ROM to flash to the tablet so it can run again, but I can't find any ROMs that would work and don't really know how to flash it.
View 8 Replies
View Related
Jun 16, 2012
My phone seems to register double touch input while i am only using one finger. It only happens only when i pass the my finger over the middle of the screen, ie. a horizontal line in the middle of the screen. This is affecting scrolling and tapping on anything in the middle of the screen.
I just want to know if this a software (calibration) issue or a problem with the screen itself.
See attached a screenshot of multi-touch test using 'Display Tester'.
View 2 Replies
View Related
Jul 25, 2013
I recently cracked the digitizer on my Asus Padfone 2 Tablet and I got a replacement digitizer from Ebay.
However, after replacing it, I noticed the x-axis is flipped.
How can I reverse it? Can it be done via editing some files?
View 1 Replies
View Related
Jan 22, 2012
I'm having problem with my Hero since I updated to [ROM][2.3.5] Zero Hero Sense 3.5 RC1. It runs so slow and and error always flash that says:"The application Touch Input (process com.htc.android.htcime) has stopped unexpectedly. Please try again."
View 2 Replies
View Related
Feb 15, 2014
In a WIP for create a CWM for Galaxy Music GT-S6010 I doing a wrong operation.
First at all I've dumped the recovery of my phone and used CWM builder online, but the recovery didn't work.
I have founded a recovery of another smartphone that I think has similar hardware, the GT-S5310. I have flashed the CWM recovery of this other phone and the result is:
1) The CWM work. It seems to work well.
2) The touch screen behavior is bad. Is incorrect and inverted. In some point when touch with one finger the result give two touch.
I think that the problem is software not hardware, because with bluetooth mouse and keyboard the phone work well.
I have already tried many times, in this order:
1) restore the original recovery;
2) flash the stock firmware;
3) flash the CWM, doing a clean cache, format /sysem, format /cache, clean dalvik cache;
But not solved.
View 4 Replies
View Related
Nov 19, 2013
I have Alcatel One Touch Idol 6030x and I'm stuck at logo, I can't do anything with my phone except enter the hard reset mod ( which unfortunately does not solve my problem). what ROM,Flash,or anything like that is, I just want my phone to be functioning again as I really can't afford a new one.
View 5 Replies
View Related
Jul 21, 2010
Stuck with a bricked phone but don't want to clear everything...i can root it again, but I'd prefer to use my old ROM
is it under the clear, restore, NAND option?
View 8 Replies
View Related
May 9, 2010
I have bought my Desire in UK where I live, but because im from Poland I use polish as well. It didnt take me long to find out the More Locate app which is great.. I can use predictive text in polish but there is a problem... when i want to use english and change it in preferences I cant chenge it back to polish because there is no such an option. The only way is to unistall more locate and reinstall it which is a pain... is there any way to fix it, so I can change the language in preferences? I have tried to install HTC_IME... its in the phone's settings but its not available during writing.
View 3 Replies
View Related
Jul 17, 2010
I just purchased this awesome phone a few days ago, and while searching the forums on how to disable the word prediction, alot of people suggest to go to the Touch Input settings in the phone, but whenever I go to Settings -> Language & Keyboard, the only choice I have is to Select Locale, which in turn gives me a list of the locale, so I choose the Locale then it just returns me to the Language & Keyboard settings screen which only has the Select locale option. So I can't find the Touch input settings to try and disable the word prediction.
View 3 Replies
View Related
Nov 4, 2010
To start: I searched the forums for this problem but didn't see anything similar. If this is a repost, sorry, please give me a link to a solution.The problem seems to go away when I shut off the screen and then turn it back on again. However, I sometimes have to do this three times in order to type a single sentence text. I did a hard reset earlier today and it was fine for a few hours. It seemed to come back after I installed some of the apps I had before it was reset. I've read that there was an issue with the earlier Evos about the screen not being grounded, but this seems more of a software issue to me. Anyone know what I can do?
View 7 Replies
View Related
Mar 25, 2010
Went to settings>language and keyboard, and checked "Touch Input". Tried to use it on Handcent SMS, and it keeps force closing. Worked fine on my previous Droid. Any suggestions?
View 2 Replies
View Related
Dec 11, 2009
this keyboard is light years ahead of the default virtual qwerty.I bought the Moment for the hard qwerty and absolutely love it, but hated to have to open the phone for each and every little thing due to the god-awful virtual keyboard.Installing HTC's Touch Input was the best decision I've made. It's super responsive and typing is almost as easy as with the iPhone. I use the T9 numeric as opposed to the full qwerty. There's also a compact qwerty if that's your thing (Blackberry-esque)It's not on the Market AFAIK, but a quick google search will show you where it is. Even has a calibration tool!
View 4 Replies
View Related
Jun 29, 2010
Right now all I am trying to do is detect when the screen is pressed and then display a log message to confirm it happened. My code so far is modified off of the CameraPreview sample code (it will eventually take a picture) so the bulk of the code is in a class that extends SurfaceView. API for the example code from the SDK is 7.
View 1 Replies
View Related
Sep 1, 2010
How handle all input key an touch event incoming to my Android application?
Is any one place where I can catch all this events?
View 2 Replies
View Related
Jul 21, 2010
Whenever I plug it in to charge. My touch screens gets all crazy and does not correctly identify my touch. If I try to enter my unlock pattern it says its wrong. And a lot of keypress are incorrect. Anyone else experience this?
View 14 Replies
View Related
Oct 16, 2012
I recently purchase a nabi 2, followed post instructions " Nabi 2 Root and Gapps Install ".
I used option 1) worked until Team Win Recovery loaded, error can't find gapps. I went install found gapps.zip in /sdcard ran it, worked. Than I used option 2), it did a backup couldn't find root.zip error, so use install option in recovery found root.zip on device ran it..
My backup is stock with gapps...
I have a rooted nabi tablet 2 with google apps on to stock rom ..
I notice stockimages files are available here, how i use the to return to stock ?
Would like to install all updates first, then root with gapps.I've rooted 2 htc hero, nook color, 2 nook tablets...
View 2 Replies
View Related
Feb 23, 2014
I did the update here - [URL]...
And removed twrp. Obviously with my lack of knowledge I
made a mistake. Now I have stock recovery and the nabi freezes on the boot logo. getting it booting again or getting twrp back on.
View 9 Replies
View Related
May 17, 2010
I am using a mixture of thick buttons, vlingo, and touch input. All suck but touch input has the least lag. So frustrated that the swype version I loved so much has closed. I am having withdrawals from swype and this is my therapy.
View 4 Replies
View Related
Jul 21, 2010
I'm working on a simple game: when you press a button on the screen, a character will run to certain direction. It's easy to support keyboard input. But, some phone doesn't go with a keyboard or even no a track ball. So I decided to draw a virtual "run" key on the screen (with opengl). When the user press the virtual key, I apply a velocity to the character. And when the user release the key, I disable the velocity to stop the character but there seems to be some touch event noisy. If my finger cannot press still, I will see millions of touch down and touch up events, instead of a single long pressing.
And occasionally, my program captured the touch down event when I touch the screen, but didn't capture touch up event. So my character will keep moving, even no finger is on the screen. I'm wondering if there is some way to reduce the touch event noisy and tell if the user is currently pressing on the screen, instead of only getting an event when touch up and down happen. It seems the system UI can detect long pressing, for example when you put a finger on one item of the list view widget, the entire item turns to orange. I just don't know how to detect pressing in my opengl game.
View 5 Replies
View Related
Oct 15, 2010
I just downloaded from the android marketplace the SlideIt Keyboard Demo. It installed without a glitch. In the settings menu "Language and Keyboard" the slideit keyboard is checked jet when ever the keyboard comes up it is always the default one.
View 2 Replies
View Related
Feb 15, 2014
What is required to root my Nabi 2. I actually only want to root the device so that I can use the foldermount app to move app data to the SD card.
A lot of the info I can find seems to be pre-OTA (well, the latest one anyhow) and I'm not sure if that invalidates the instructions.
My device: -
Stock everything as per latest OTA update.
NABI2-NV7A - US
Android 4.1.1
Build JRO03C
View 1 Replies
View Related
Jul 28, 2010
MY phone isn't going into sleep mode as much as it should I just rebooteb it a couple of hours ago and I get up time =1:53.03, awake time = 1:32:01. whe I check running services Toucch input has been running for 1:32:01....what is it can I turn it off?
View 1 Replies
View Related
Jul 23, 2010
I am working on a paint application for Android. Now I want to implement an eraser to allow erasing parts of a loaded bitmap by using touch input and making the bitmap transparent along the finger's path.
A very good example of what I try to achieve is shown in the application Steamy Window for Android. Steamy Window simulates a fogged window, where a user can wipe parts of the fog via touch input.
UPDATE: I have posted the most important sections of my current code below. I am not really happy with it for the following reasons:
Drawing is quite sluggish. What can I improve here?
I am looking for a way to use an alpha mask in order to set the pixel transparency/alpha of the pixels as I want to simulate a paint brush. Any suggestions how this could be achieved?
CODE:...................
View 1 Replies
View Related
Jun 25, 2010
I just installed the firmware update for HTC Hero when it prompted me to download it and install on my phone. Everything is great, EXCEPT, my touch input keyboard always stops unexpectedly when i try to use it. i can't type anything with it! the message i get:
Sorry!
The application Touch Input (process com.htc.android.htcime) has stopped unexpectedly. Please try again.
FORCE CLOSE.
View 1 Replies
View Related
Jan 28, 2013
I rooted using the nabi lab 2 (URL....), after a prior root, gapps installation which had the update issue. I am on the current .37 update.I downloaded dragonbox from the play store, and it loads but nothing on the screen responds to touch. Is there a way I can force this app to work on the Nabi? Or is this an issue with the software? (I'd be willing to get to the bones, rid the Monarch UI, etc. to have better functionality of the Nabi).
View 1 Replies
View Related
