i installed clock work mod recovery using odin multidownloader in my galaxy fit s5670, then i gave factory reset in cwm recovery. now my phone is not booting.stuck at start-up,looping around..
View 1 Replies
I think I might be in serious trouble here. I'm new to smartphones in general and wanted to root my Evo so that I could get rid of that annoying bloatware and maybe find some cool functionality.I'm new to forums too, but I did dig through a ton before I posted this and didn't see a solution to my problem.I used unrevoked 3 to root the phone. Worked fine. Tried to install Fresh through Rom Manager, but couldn't get it to flash by installing from sd card. Sort of abandoned that and moved on to Bugless Beast. I downloaded that to my computer transferred to my phone and tried "install from sd card" again. No luck, it just gave me the startup screen "htc evo 4g" and stayed on.I used nandroid to restore to my previous settings with no problem. I decided to partition the hardrive and try to flash bugless beast again. This would have been fine, but I didn't realize that partitioning removed the clockwise back up file.So, now I don't have anything to restore back to and it is stuck on the "htc evo 4g" screen.I can still get into the hboot, so its not a total loss yet.
View 7 Replies View RelatedModel no- Reliance ZTE V9C
Not booting & stuck on Reliance welcome screen. I have not installed any apps in recent time neither did any sorts of tweaking.
Turned on the phone this morning, it loaded fine. It then rebooted and sits at the HTC screen. I didnt even get a chance to do anything.
View 8 Replies View RelatedI recently tried flashing Demagless 2.0.8 and now my phone is stuck on the HTC Black logo screen while the phone is starting up I have done a clean wipe and reflashed demageless 2.0.7.2 and also fresh 2d but now I get the same problem previously I've had fresh 2d installed and worked perfectly fine. I can still access my root but no matter what rom I flash it won't start up.
View 5 Replies View RelatedIts not doing anything thing? Like all it says is HTC and its got like a spotlight on it, I am charging it now so maybe its because I needed to be charged? a little help!
View 2 Replies View RelatedI just bought my Droid X a couple of weeks ago (2.2 and Rooted). It wanted to do some auto app updates and I told it to do them all not sure if it was before or after that that I noticed a red light by the ear "piece/speaker" and the phone was on and a battery level warning came on which I thought was premature. I plugged in the power cord the light went to green and I looked over a few minutes later and it was dead. I could be a little off on what happened when but that's what happened.
It wont power on now and I've tried holding a few different buttons while powering on and still nothing. I did check the settings the other day and it was successfully backing itself up not sure how to use that backup though. I just looked over after typing this post and the Motorola "M" was on the screen but I couldn't get it to do anything so I pulled the battery and tried again to boot it and nothing.
I got galaxy gio, which has Android 2.3.3, today at a worse moment of my life, I update my gio from Setting > About Phone > Update then it ask me for sign in, I login then it start updating after some time it says your phone is now restarting, then a 20 - 30 mints loading comleted and it stucks, then I restart it doesn't do anything, it only stucks at boot up screen, on that my screen just showing me Galaxy Gio S5660 and then nothing happened just stuck, I again restart but it stuck.
now I want to restore it to factory setting by pc, if it possible, I thing i have disturb the OS so I can only restore it by from my PC. I have lost my android
I'm trying to compile omegamoon's kernel, it's a gitbub project.
I compiled it and I have the zImage.img. Using Finless ROM Flash Tool I flashed Finless 2.1 ROM, and works great. Then I flashed the same ROM but instead of the kernel that comes with that ROM I put my zImage there. As result my pen is not booting, and it's stuck in a black screen with two penguins..
my phone is not booting into stock recovery and it is stuck in boot loop, only download mode is working.
I have downloaded the firmware rom . and Flash it many time through Odin 3.07 and it's still stuck in boot loop.
I just installed an app (Contact Owner) and once I rebooted my phone, I can never get back into the system.
That shall be the only harmful action that I had done, can I know if there's any way that I can boot into safe mode to uninstall that particular app?
Note:I read some links, including this. Some said, HOME + Power, some said MENU + Power. Am trying both now and see which is gonna work.Tried both, not working How long do I have to press on the buttons? Is the "Power" button the right most bottom button?
I updated to BB 0.4 from a previous old 2.2 installation. Now I'm stuck in an endless reboot loop! It alternates between Droid and the red Droid eye!
1) I copied update.zip to the root of the drive.
2) I installed update.zip
3) Install was successful
4) Rebooted
my tablets android system and now it's stuck on the booting screen. What should I do?
View 2 Replies View RelatedI had an issue flashing the newest version of the leedroid ROM. To start my phone was running stock un-rooted Android 2.1. This is what I've done
1) Rooted the device using the Unrevoked method. Everything with this went fine. I get the Superuser app and I can get the '#' prompt at a terminal.
2) Then I partitioned my SD card using Rom Manager in preparation for A2SD+
3) Then I booted into clockwork mod recovery and wiped data/factory reset, wiped cache, and wiped dalvik cache
4) Then I tried to flash the leedroid rom from zip on the sd card
After reboot my phone appears to be stuck on the HTC screen and will not move forward. But if I take out the battery I can boot back into recovery mode. So it appears my phone is not broken, but it clearly isn't working. I've tried flashing a number of different ROMs but get the same result each time.
I tried to flash the Fission 2.0.2 rom earlier today. I am running the OTA Froyo update (can't remember the exact firmware off the top of my head) with the 928 Droid X Black Glass theme, so I was deodexed. I followed the instructions, I made a nandroid backup, wiped the cache and data, mounted the cache and data, installed the ROM and tried to reboot, and it poped up to the M.
I waited an hour and a half and it was still stuck like that. I pulled the battery hoping to get back into Clockwork recovery, but not it's still stuck on the M.
I am now stuck at the startup m. I was rooted running 2.1 with titanium backup, clockwork recovery and tthe kousch botstrapper installed. The first thing I did with clockwork was to tell it to make a recovery file. Today I threw the bootstrapper apk folder on the sd card and had it install. then I put the fly-x rom on the sdcard in teh clockwork folder, opened the bootstrap app and told it to boot into recovery.
Once in recovery I had it apply the fly-x rom.zip and everything seemed to go fine. no dice, stuck at the logo. pulled battery tried again, same result. got back into the bootstrap launcher and told it to boot the recovery.zip file I created. all seemed to go fine. Reboot and get the same screen.
I have rooted my phone and have now the recovery mode from HD blog. It's was working fine. So I tried to get the Galaxhero ROM installed. I did the following steps:
1) Reboot in recovery mode (Volume down + both Call buttons) and choose "Nandroid backup" to save a backup of your current ROM just in case.
2) Backup G apps
3) Then, choose "Wipe data/factory reset". The phone will reboot in recovery mode again.
4) Choose "Apply sdcard:update.zip" (second menu entry on the recovery screen)
5) Restore Google applications ("Restore G.Apps")
6) "Enable root (su)".
But then enable root failed! Anyway I went on further with reboot system. It rebooted till the "android HD logo" showed up and then suddenly the screen went off and it seemed like my phone went off. So I went back to the recovery mode and did the following steps:
Wipe data
Restore backup
Restore G apps
Enable root SU, but again enable su failed!!
Again I choose reboot system, and when the reboot came again to the "android HD logo". It stuck there and stayed looping.
First, why do I still see the android HD logo again because I did a wipe!
Second, How can I get my phone working again!
My phone is HTC EVO 3D, and it's bricking after the ICS update from provider. It hangs on the HTC logo. I read numerous post about flashing it with update or rom, but it's now S-ON and when I try to flash from SD card in recovery it gives me :
Invalid Operation
Rebooting Reasonem-00
As far as I know I have to get it to S-OFF before I can use recovery to flash it, but I tried revolutionary and seems like it require the phone in a working state to function. Currently when I run revolutionary with usb connected on HBOOT-1.49.0008 menu revolutionary won't connect. I don't have CWM either and I don't know how to get it onto the phone without Market Place and S-ON.
Is there anyway to get it to S-OFF so I can move forward to fix my phone with any working rom? Fastboot is connecting no problem (at HBOOT menu) but I don't know if it allows me to flash or turn it to S-OFF.
well i rooted my phone with the htc-dev boot unlocker and then used Revolutionary: S-OFF & Recovery Tool 0.4pre4 to s-off my phone, after installing the latest firmware now after booting my phone i cant get a signal and each time i try to register on a network my phone just comes up with an error so i have no signal at all,
iv tryed every single firmware, iv tryed changing my cid to 1111111 then iv moved it back to htc__001 but that doesnt work anymore, iv also tryed a bunch of ruus to bring my phone back to stock but that doesnt work... my phone was factory unlocked so im kinda unsure on what ruu is corrent. my current hboot settings are listed..
I rooted my phone and got new kernel and ROM 2 months ago : MIUI
but today i wanted to flash a new fast kernel "fusion" and get superJB rom ...
I flashed the kernel successfully with flash tool then i tried to boot my phone i just got the fusion logo forever so i had to pull the battery out many times
I said it was ok and i began to flash the new ROM maybe it would work
now the problem : my little brother :@ hit the mobile cable while flashing the system.img ( rom image )
I tried to restart the process but the phone doesn't respond and i just have the logo of fusion forever and the blue led always on .. when it boots....
I WAS HAVING GALAXY S2 JB 4.2 FOR GALAXY ACE.I UNROOTED WID ODIN by the package S5830JPKS2_S5830OJPKS2_S5830XWKS2_HOME.tar.md5
the operation wass succes.but it is not booting. the samsung logo comes(the second animated logo) and continues. but the ui is not loading.
My problem is that my phone is not booting, it's just loading.. So i need to reflash my phone again but i'm not sure on how to proceed. I had ICS and an custom room, im not sure which 1 but if it's important i can find it out.
View 1 Replies View Relatedmy phone is not booting into stock recovery and it is stuck in boot loop, only download mode is working.I have downloaded the official firmware from sam mobile.com. But can't Flash through Odin and it is showing write failed in odin. I have a backup of CWM in my SD but to flash it CWm recovery in my phone is not working.
View 9 Replies View RelatedI have karbonn titanium s5 not a very popular phone. It doesn't have any custom rom.. I rooted it and tried to change lcd density using lcd density modder app from google play phone doesn't boots up anymore.
I see the screen when device turns on then i hear the boot animation but i cannot see the boot animation. I have cwm accesable on the phone and can also boot it into fastboot mode. I have a nandroid backup when the phone used to work but its not restoring it says md5 mismatch.
There's no stock rom for my phone available but i have extracted the system folder from nandroid backup.
I'm having troubles with my Samsung XCover 2
My friend worked with me doing all this:
1. Flashed a root file to get root access | All fine
2. Checked root access | All worked
3. Flashed CWM recovery | All
4. In CWM, we flashed Cyanogenmod | Not fine
5. After, we factory resetted | All worked (CM)
6. We flashed gapps | All fine
7. CWM was stuck in a bootloop, after taking out the battery the screen turned to colored dotted lines
8. Phone has a blackscreen and somtimes gets the colered dotted lines
The only thing i want now, is to use my phone as intended, I just want it to work.
I turn back on my phone, I have to wait a few minutes before placing a phone call. just wondering if it's my phone, CM7 bug, or just an Android limitation?
View 1 Replies View RelatedSomehow last night my phone (Galaxy S4 running AOSP 4.4.2) crashed and now it wont reboot. It just sticks on the screen with the four colours animation for ever. I tried deleting the Cache, and Davilik Cache but it has not fixed the problem .. after this is went through the Upgrading Android process for all the apps but then stuck on "Starting Apps" .some application is starting and has a problem and so my phone wont boot .. but is there anyway of finding out which application it is? I also tried re-flashing my ROM but it didnt work.
View 1 Replies View Relatedi have xolo q600 mobile which was unable to use !! i switched on the power key after that xolo animation loading and no response still loading animation of xolo. if i flash a stock rom it will load ?
View 3 Replies View RelatedI have a Garmin-Asus A10 that i wanted to change its font using Type Fresh app. When the font changed the app required a reboot,, but when the phone rebooted it became unable to boot after the garmin-asus logo anymore !!
I tried a hard reset using the volume keys pressed with the power button but it displays "**WIPE USERDATA**" on the top left corner and nothing happened.There is an option to hold the volume up key with the power button that displays " USB POLLING MODE " in a blue screen.
My phone now is not able to boot properly and freezes on the startup logo.
Every time I start my phone it seems that every program in the app catalog starts up. Until I activate the Advanced Task Killer and shut them all down, the thing runs like a hog. I have quite a few programs installed, but I dont use them all all of the time. Why do they all start up and is there any way beside the ATK to stop them? Is there any way to modify the startup files?
View 4 Replies View Related