i have xolo q600 mobile which was unable to use !! i switched on the power key after that xolo animation loading and no response still loading animation of xolo. if i flash a stock rom it will load ?
View 3 Replies
My problem is that my phone is not booting, it's just loading.. So i need to reflash my phone again but i'm not sure on how to proceed. I had ICS and an custom room, im not sure which 1 but if it's important i can find it out.
View 1 Replies View Relatedrecover my Xolo Q2000, i had given my cell to a friend of mine to install apps. but now it doesn't even start! when i turn it on it just shows the logo "XOLO" and then nothing happens, doesn't even boot into recovery as i tried with pressing power and both volume keys together. when i connect it to pc it just shows the battery icon, before it used to show the percentage too...
as far a i remember it had android 4.2.1 and that friend had told me he tried to install new rom or kitkat or recovery..well, i guess he just messed up and experiemented my Q2000. i just bought it a month ago.
How to Enable CRT Animation in My Xolo A500
View 9 Replies View RelatedIs there anyway to get an itunes software onto an android and get it to front load as the main screen upon boot up?
View 1 Replies View RelatedAll of a sudden my girlfriend's Nexus One is rebooting somehow. She fires up her phone, it boots just fine, after a few seconds when everything is loaded, u can scroll thru the menus etc, it seems to reboot, but real fast, the animation comes up, and 2sec later the home screen is visible again. It keeps doing this.
Any ideas? The phone is not rooted, no custom rom, just a few regular apps form the market installed, nothing fancy.
Im having a Samsung galaxy y right now and planning to buy a new smartphone
Im on low budget so Im looking for high specs and low budget phones from Indian brands
I do a lot of tweaking and use a lot of mods /custom Roms for my sgy
As Im thinking of getting Indian smartphone (xolo a700), i fear someday ill mess up with my phone and get it bricked
I can't find much of stock/custom Roms for any of such phone
So my question is how can i create a backup,including system files and stock Rom so that i can mess up with my phone and revert back to stock Rom when i need to Im talking something like what we've for sgy ,the odin flashable stock roms, which work 99% of the time even when cwm recovery doesn't work of
recently bought xolo a800 phone ... was experimenting with it and bricked it the next day.....the phone is stuck on the xolo logo at start and its not booting into os.. the phone is soft bricked according to me
Phone details :-
xolo.in/800
processor & GPU Chipset MT6577
CPU 1 GHz Dual Core
GPU PowerVR SGX 531[code]....
Is there a step by step for loading a new boot animation with Root Explorer? I have a good idea of what needs to happen, but don't see how I copy the new one in with the app.
View 3 Replies View RelatedMy phone is HTC EVO 3D, and it's bricking after the ICS update from provider. It hangs on the HTC logo. I read numerous post about flashing it with update or rom, but it's now S-ON and when I try to flash from SD card in recovery it gives me :
Invalid Operation
Rebooting Reasonem-00
As far as I know I have to get it to S-OFF before I can use recovery to flash it, but I tried revolutionary and seems like it require the phone in a working state to function. Currently when I run revolutionary with usb connected on HBOOT-1.49.0008 menu revolutionary won't connect. I don't have CWM either and I don't know how to get it onto the phone without Market Place and S-ON.
Is there anyway to get it to S-OFF so I can move forward to fix my phone with any working rom? Fastboot is connecting no problem (at HBOOT menu) but I don't know if it allows me to flash or turn it to S-OFF.
well i rooted my phone with the htc-dev boot unlocker and then used Revolutionary: S-OFF & Recovery Tool 0.4pre4 to s-off my phone, after installing the latest firmware now after booting my phone i cant get a signal and each time i try to register on a network my phone just comes up with an error so i have no signal at all,
iv tryed every single firmware, iv tryed changing my cid to 1111111 then iv moved it back to htc__001 but that doesnt work anymore, iv also tryed a bunch of ruus to bring my phone back to stock but that doesnt work... my phone was factory unlocked so im kinda unsure on what ruu is corrent. my current hboot settings are listed..
I rooted my phone and got new kernel and ROM 2 months ago : MIUI
but today i wanted to flash a new fast kernel "fusion" and get superJB rom ...
I flashed the kernel successfully with flash tool then i tried to boot my phone i just got the fusion logo forever so i had to pull the battery out many times
I said it was ok and i began to flash the new ROM maybe it would work
now the problem : my little brother :@ hit the mobile cable while flashing the system.img ( rom image )
I tried to restart the process but the phone doesn't respond and i just have the logo of fusion forever and the blue led always on .. when it boots....
I WAS HAVING GALAXY S2 JB 4.2 FOR GALAXY ACE.I UNROOTED WID ODIN by the package S5830JPKS2_S5830OJPKS2_S5830XWKS2_HOME.tar.md5
the operation wass succes.but it is not booting. the samsung logo comes(the second animated logo) and continues. but the ui is not loading.
my phone is not booting into stock recovery and it is stuck in boot loop, only download mode is working.I have downloaded the official firmware from sam mobile.com. But can't Flash through Odin and it is showing write failed in odin. I have a backup of CWM in my SD but to flash it CWm recovery in my phone is not working.
View 9 Replies View Relatedi installed clock work mod recovery using odin multidownloader in my galaxy fit s5670, then i gave factory reset in cwm recovery. now my phone is not booting.stuck at start-up,looping around..
View 1 Replies View RelatedI have karbonn titanium s5 not a very popular phone. It doesn't have any custom rom.. I rooted it and tried to change lcd density using lcd density modder app from google play phone doesn't boots up anymore.
I see the screen when device turns on then i hear the boot animation but i cannot see the boot animation. I have cwm accesable on the phone and can also boot it into fastboot mode. I have a nandroid backup when the phone used to work but its not restoring it says md5 mismatch.
There's no stock rom for my phone available but i have extracted the system folder from nandroid backup.
I'm having troubles with my Samsung XCover 2
My friend worked with me doing all this:
1. Flashed a root file to get root access | All fine
2. Checked root access | All worked
3. Flashed CWM recovery | All
4. In CWM, we flashed Cyanogenmod | Not fine
5. After, we factory resetted | All worked (CM)
6. We flashed gapps | All fine
7. CWM was stuck in a bootloop, after taking out the battery the screen turned to colored dotted lines
8. Phone has a blackscreen and somtimes gets the colered dotted lines
The only thing i want now, is to use my phone as intended, I just want it to work.
Somehow last night my phone (Galaxy S4 running AOSP 4.4.2) crashed and now it wont reboot. It just sticks on the screen with the four colours animation for ever. I tried deleting the Cache, and Davilik Cache but it has not fixed the problem .. after this is went through the Upgrading Android process for all the apps but then stuck on "Starting Apps" .some application is starting and has a problem and so my phone wont boot .. but is there anyway of finding out which application it is? I also tried re-flashing my ROM but it didnt work.
View 1 Replies View RelatedI've created an application that show around 250 images in ImageView. Images are loaded one after another, 15-30 images per second. Basically the whole thing gives an illusion of a rotating 3D object, at least it should.
The problem is next, app hangs when loading certain images(i.e. I see a few seconds of fluid animation and then animation hangs, jump 10-15 frames(images) ahead and continues. It always happens at the same places in animation cycle.
I though that Android might not have enough resources to handle something like this, so I've resized images to half their size, but it did't help. I've tried buffering images but that did't help either(actually, maybe a little, I think that animation looks a little bit smoother).
And now the weirdest thing. I use the touch screen to allow users to "rotate" the 3D object on those images, and while rotating I again experience those hangs at exactly the same places as with the animation.
All images are in .png format and their size vary from 15kB to 40kB.
I use the following code for the animation:
CODE:.....................
I'm fading out an imageview with alpha animation. I'd like the image to stay transparent after the animation. Tried with different combinations of fillAfter and fillEnabled, no luck. How can this be achieved?
View 1 Replies View RelatedInstalled a devil kernel without wiping the previous kernel (semaphore)now my phone is stuck on the turning on screen (the one with the GALAXY S symbole in white)and when i enter the recovery mode i cant wipe data/factory reset it says cant mount E: and stuff like that.
View 3 Replies View RelatedI use http://stackoverflow.com/questions/541966/android-how-do-i-do-a-lazy-load-of-images-in-listview/3068012#3068012 to load images in a ListView and a GridView. It works but the images are loaded form bpttom to top. How to fix that?
Bonus Question: Can I use a loading animation in a image view while the real image is loaded? Right now it's just a default image.
I have found the roms which is similar to xolo a800 except some hardware.
correct one from the blog linked below. I don't want to brick my phone with improper rom.
Link: pandro-build.org(slash)tag(slash)custom-roms-2
It did worked once but that i can't take any.Is there any other way to take screenshots.
View 2 Replies View RelatedI recently bought my new phone Xolo Q800, and it's also my first Android device.
One thing - no driver to connect my phone in USB debugging mode when I have to run my Android apps on my phone from Eclipse
I even sent an email to Xolo support, but haven't gotten any reply yet. I remember many Q800 users here talking about the phone here when it was launched.
I flashed my phone with a rom but after using it some time it became little leggy to so I reseted it the problem is now its been stuck on resetting animation and goes restarts again and agin and the (power+vol. down) button menu is cumming in Chinese and recovery mode is not opening the page was [URL] ....
View 9 Replies View RelatedI have problem with my phone galaxy s2 g ( GT-I9100g ) Running ICS official rom , not rooted. its start show up before 3 months ago when i loading more than app in the same time its says "user panic upload mode"
i have to remove the battery and re-back it . i dont know why but, its very noisy
i seriously need Stock Rom of Xolo A700 or Backup of the original ROM. All other Stock Rom posted on other blogs and forums are just fake and crap. if u don't have the stock dump. backup your ROM and share.
View 1 Replies View Relatedi bought xolo q700 few days back. i have this strange issue with its display.everything is working fine and i love this phone. but when i call any number the screen goes off. i cannot see options to put it on loudspeaker and most importantly i cannot use the dialer. also i cannot be sure if i have dialed the right number. the screen just goes off. physical buttons only of volume rocker and power button and it cannot bring the display up.
is this manufacturing defect or is this something to do with display settings (i checked but couldnt find any setting regarding it). is it same with any other jb 4.2 phones?.
mobile : Xolo A500
version ICS 4.0.4
Problem : not able to use google+, hangout and other google apps because app tells to install "google play services" and when try to install google play service got error " incompatible with other application using same shared user id " wont installed
So i want to update all google apps without rooting my mobile because it is still in warranty. Any method to install gapps without root
what i tried
-factory reset
-software update (doesn't updated gapps)