Motorola Droid X :: Flashed Fission 2.0.2 And Stuck On Startup M
Nov 10, 2010
I tried to flash the Fission 2.0.2 rom earlier today. I am running the OTA Froyo update (can't remember the exact firmware off the top of my head) with the 928 Droid X Black Glass theme, so I was deodexed. I followed the instructions, I made a nandroid backup, wiped the cache and data, mounted the cache and data, installed the ROM and tried to reboot, and it poped up to the M.
I waited an hour and a half and it was still stuck like that. I pulled the battery hoping to get back into Clockwork recovery, but not it's still stuck on the M.
View 12 Replies
Sep 9, 2010
I am now stuck at the startup m. I was rooted running 2.1 with titanium backup, clockwork recovery and tthe kousch botstrapper installed. The first thing I did with clockwork was to tell it to make a recovery file. Today I threw the bootstrapper apk folder on the sd card and had it install. then I put the fly-x rom on the sdcard in teh clockwork folder, opened the bootstrap app and told it to boot into recovery.
Once in recovery I had it apply the fly-x rom.zip and everything seemed to go fine. no dice, stuck at the logo. pulled battery tried again, same result. got back into the bootstrap launcher and told it to boot the recovery.zip file I created. all seemed to go fine. Reboot and get the same screen.
View 8 Replies
View Related
Nov 25, 2010
I just bought my Droid X a couple of weeks ago (2.2 and Rooted). It wanted to do some auto app updates and I told it to do them all not sure if it was before or after that that I noticed a red light by the ear "piece/speaker" and the phone was on and a battery level warning came on which I thought was premature. I plugged in the power cord the light went to green and I looked over a few minutes later and it was dead. I could be a little off on what happened when but that's what happened.
It wont power on now and I've tried holding a few different buttons while powering on and still nothing. I did check the settings the other day and it was successfully backing itself up not sure how to use that backup though. I just looked over after typing this post and the Motorola "M" was on the screen but I couldn't get it to do anything so I pulled the battery and tried again to boot it and nothing.
View 7 Replies
View Related
Jan 7, 2010
Every time I start my phone it seems that every program in the app catalog starts up. Until I activate the Advanced Task Killer and shut them all down, the thing runs like a hog. I have quite a few programs installed, but I dont use them all all of the time. Why do they all start up and is there any way beside the ATK to stop them? Is there any way to modify the startup files?
View 4 Replies
View Related
Jan 7, 2010
Its not doing anything thing? Like all it says is HTC and its got like a spotlight on it, I am charging it now so maybe its because I needed to be charged? a little help!
View 2 Replies
View Related
Nov 3, 2010
I, nor any other member of Team Defuse, nor Team Defuse as a whole are responsible for any damage done to your device.
This theme is in rapid production. Initial release contains a few apps themed, and most of the framework. All initial release fission apps will be themed, as well as additional ones.
Fission Latest:
Download Link
Team Defuse Site:
Team Defuse
Download Link:
Version 1.1.4
Installation Instructions:
1. Download X_v1.1.4.zip
2. Place file on root of your sdcard
3. Bootstrap recovery using Koush's Bootstrapper
4. Mount system *
5. Install zip from sdcard, choose X_v1.1.4.zip from sdcard
6. Reboot and enjoy.
*Mount system isn't necessary, but recommended as safe practice.
Change log:
v1.1.4
Minimal stock colors left. Changed check boxes. Revamped 99% of stock framework
v1.0.2
.xml updates
v1.0.1
Fixed installation
v1.0
Initial Release
credit:
Fission 2.0.1 - Team Defuse
Status Bar Icons - fichdak and manup456
View 12 Replies
View Related
Nov 13, 2010
I don't take credit for any of this just passing it along since I don't think many team Defuse guys frequent this forum.
2.1 final is now available at their site here. They originally were only releasing it today to people that donated, but since he is so nice he has opened it up to everyone else (although donating isn't a bad idea, he has done a lot and it's always nice to support devs.) I have been on this ROM since the early stages and it's awesome!
A little excerpt about the ROM from their site:
This is not an AOSP ROM but all stock packages are built from source. It is a complete set of vanilla Android applications. All Blur has been removed so it is the closest you will get to a true AOSP clean ROM for the Droid2/X/Global/Pro right now. This is not a themed ROM to make it look like AOSP ROM.
The purpose of this ROM was to remove all Blur and have a real Android experience. Please do not ask to add anything to ROM. Everything that is missing can be found in the Add On folder that was created when you installed ROM or can be downloaded from market.
The installed applications are all of your basic Android apps. Gmail, Voice Search, Car Home, YouTube and some other apps are missing since there are more updated versions on the market.
--
It is wicked fast and has greatly increased my battery life. I highly recommend this ROM to everyone. Please be sure to follow the directions exactly.
Instructions for downloading ROM can be found at his original thread over at XDA here
View 49 Replies
View Related
Nov 1, 2010
FISSION V1.2 can be found HERE.
________________________
Fission 2.0.1 Available to download for Droid X. Looks like a good one.
I do not take credit for this Rom only sharing the information. Great ROM. I keep trying Rubix and Apex and keep coming back.
Team Defuse for your hard work and great ROM.
Download
PLEASE READ EVERYTHING ON THIS FRONT PAGE CAREFULLY BEFORE INSTALLING.
If you are coming from any ROM besides Fission then SBF before you install this.
If you are on Fission and did not SBF before you came to Fission then SBF too.
Do NOT clog thread with posts like "how can I find SBF" If you take 2 minutes to look around you will find it.
YOU WILL NEED TO DO THE COMPLETE INSTALL INSTRUCTIONS.
This ROM does NOT lose root. You must install root from market or check /sdcard/fission/addon for superuser.apk, bootstrap and terminal.
If you have the latest OTA update then I suggest you do not install this ROM in the case something goes wrong you will be stuck with a brick. You will not be able to SBF your phone YET. So the choice is up to you.
Fission 2.0.1 works on new and old kernel.
Fission 2.0.1 works on new baseband or old.
DO NOT INSTALL ANY THEMES FOR THIS ROM UNLESS THEY ARE MADE FOR FISSION 2.0. THAT EVEN INCLUDES THEMES FOR FISSION < 2.0. Almost all apps are different and are Android 2.2.1 versions.
Themers please get in touch with me before you release your themes. I would like to test them first because a couple of old ones caused problems and I will work with you to get them right. Fission will only support themes that are made for Fission.
Install Insctructions:
Installing ROM:
This Method works for all supported devices.
It is suggested you follow all the steps even if you are coming from previous Fission ROM. If you do not want to perform all wipe steps then at least wipe system.
Pre-Installation Tasks:
Tap "Bootstrap Recovery"
Tap "Allow" if asked to grant SU Persmission
Tap "OK' on "Success" screen
Tap "Reboot Recovery"
You will be booted into Recovery
Use Volume up/down keys to navigate through menu. Press Camera button to Confirm selection. Power button to back up to last menu.
Create Backup - "backup and restore" then select what you want to do
Back out to main menu
Wipe Cache
Wipe Data
Mount System - Screen will read "UNMOUNT /SYSTEM" when mounted
Mount Data - Screen will read "UNMOUNT /DATA" when mounted
Back out to Manin Menu
Install Zip From SD Card
Choose Zip From SD Card
Select your ROM
Yes - Install
Wipe Cache
Wipe Data
Reboot
Back into Android
Perform a Factory Reset
Open App Draw
Tap Settings
Tap Privacy
Tap Factory Reset
Tap Reset Phone
Tap Erase Everything
Your phone will now be rebooted, perform factory reset and then reboot itself when completed.
Activate phone when prompted.
Enjoy!
Installing Updates and Add Ons:
Open Bootstrap
Tap "Bootstrap Recovery" - if you have not installed yet on new ROM
Tap "Allow" if asked to grant SU Persmission - If you have not granted it SU permission
Tap "OK' on "Success" screen - if you have not installed yet on new ROM
Tap "Reboot Recovery"
You will be booted into Recovery
Use Volume up/down keys to navigate through menu. Press Camera button to Confirm selection. Power button to back up to last menu.
Mount System - Screen will read "UNMOUNT /SYSTEM" when mounted
Back out to Manin Menu
Install Zip From SD Card
Choose Zip From SD Card
Select your Zip File
Yes - Install
Reboot
View 49 Replies
View Related
Oct 26, 2010
Installed fission and like it, but cant get anything to go into recovery to create backups or do anything. bootstrap wont go into recovery either.
View 14 Replies
View Related
Nov 13, 2010
----Fission 2.0.1 ONLY.----
Themes for Fission 2.0.1. and only fission 2.
Think Im done with these and wanted to post up a cleaned up thread with a couple things in it. (Hope nobody minds).
Only gonna post the one I ran for awhile and had most download hits and the one Im on now that people will probably like. Kept everything moved to a theme previously o.k.'d for Fission 2.+ as a base theme.
Pretty simple themes. (But then look who put them together ).
---------------------------------------------------------------------------
Fission rc1 was released, no idea if this works on that.
2.1 released as well; have not tried on it.
No idea about earlier versions either.
im using this on 2.0.1
----KangeradeX theme:
mix between;
Joe772's "x" dark theme
D2 Kangerade in blue theme
download link;
KangeradeX.zip
Seems to have resolved some things I didnt like about the X theme like the check marks not being real visible in options and it also gave me the status bar back I like.
Im a rookie. Use at your own risk.
blue check marks;
------------------
back up current theme your using
download file
copy to sd card
bootstrap recover/ ok
reboot recovery
mounts and storage, mount system
back, install zip from sd card, choose zip from sd card
choose theme
install, done; back and tell it to reboot
-----------------
----if you notice any issues after reboot; reboot one more time.----
(or just reboot one more time anyway)^
credit links for themes used (not download links for KangeradeX);
[THEME - Fission 2.0+] X v1.1.4 (11/5/2010) (NO 2.1 YET) - xda-developers
[THEME] Kangerade Blue for the Droid2 - xda-developers
thanks to tom for turning me on to 7zip which has helped me waste a lot of my free time playing around with themes....lol.... i enjoy it.
thanks to mruno for naming it
------------------------------------------------------------------------------------------------
----KangeradeX theme with the smoother looking alarm clock and rotary battery charge/animated recharge icon:
Im running this now but haven't been real long. It should be fine as it is based on the same setup as above with the exception of the battery icon.
(Battery icon should be out NO MORE then 10% from what system says at any time.
basically if system says 90%; bat. icon will either say 90 or 80, then they will both say 80 for awhile, and on and on....you get the idea. Not enough you should notice according to my testing).
http://www.megaupload.com/?d=SM8HLZUX
^1st download link
[url]
^2nd download link if first link doesnt work.
credits:
Thanks to colchiro for helping me through the bat. icon change.
and link to the credit for bat. icons:
NexTheme 10% Circle Battery Mod
then the same links given credit above for the other version.
And of course thanks to Fission for such an awesome rom!
----check out their newer rom version;[url]
-----and their web site;[url]
------------------------------------------------------------------------------------
The last one that got a few download........ (which I have no idea whom to give credit to):
droid peeing on apple boot animation;
bootanimation.zip
download link^
copy to sd card, use file browser, copy bootanimation.zip from card, back click, data, paste in local, quit, reboot.
---------------------------------------------------------------------------------
Link to original thread with more downloads and other info.:
KangeradeX theme Fission2.+ (questions/thoughts)
Let me know if there are any issue that werent there before theme install (if anyone tries these). I haven't heard anything on the one that got a few downloads; I assume thats a good thing....lol.....
Hope someone enjoys.....
View 6 Replies
View Related
Nov 14, 2010
Blkkangbluecircbat theme for Fission 2.1 gone final (?))
THIS IS FOR FISSION 2.1 THAT JUST RELEASED AND IS NOT APPROVED BY ANYONE!
----DO NOT INSTALL THIS AND THEN GO CRY TO THE HARD WORKING FISSION GUYS ABOUT ANY BUGS OR TO THE CREATOR OF BLACKOUT THEME (Javroch).----
YOU INSTALL AT YOUR OWN RISK AND HAD BETTER BE ABLE TO HANDLE IT IF IT CAUSES PROBLEMS.
I mixed this for myself as I like the blue theme. I literately just loaded it and tested it for internet, text, phone calls, etc., etc.
I never loaded Blackout theme prior to loading this theme. These two are the first two themes I have loaded since installing Fission 2.1.
I loaded the small and tested, loaded the full and tested, and loaded the small again and tested.
I loaded Fission 2.1 as per the directions, did not load any extras from the sd card, and later mixed this theme. I did not use any extras from the sd card for blackout. Im not that smart....I just like blue....lol....
This wasnt hard to do so all credit for anything positive in it goes to Javroch and Fission. Anything negative you can blame me and yourself for loading it.
Im sure there will be updates to the blackout theme and other things....all this again equals you load and deal with any issues of your own choices.
If you run it today, you are running it for as long as I have....so good luck.
If you're worried then just wait. I'm sure more approved themes will be out soon.
I'm a rookie. Use at your own risk.
(Half tempted not to put this up).
----------------------------------------------------
TestBlackoutKangblue2.1:
Loaded via the sd card normal way.
Download file, drop on sd card, bootstrap recovery, ok, bootstrap reboot.
mount system, install .zip from sd card, pick .zip from sd card, install, reboot.
After it loads, reboot once more for fun.
Notice that it took a second longer then i was used to for the bootstrap to throw up the green writing offering to reboot and other options. So be a little patient. (Boot animation as well).
----------------------------------------------------------
For the only final version (fingers crossed....lol), go here;
Blkkangbluecircbat theme for Fission 2.1 gone final (?)
known issues;
TestBlackoutKangblue2.1 Theme for Fission 2.1
(does not effect final version blue version in above link)^
blue simple battery, simple icons blue version;
TestBlackoutKangblue2.1 Theme for Fission 2.1
(both still have market visibility in auto search issues)
Pics:
------------------------------------------------------------
credits:
Fission
[ROM]Fission Vanilla 2.1 - 11.13.2010 - Generic Android - xda-developers
Team DeFuse - Bringing you the FIRST Android Vanilla ROM to Droid2 and DroidX!
Black Out theme
[THEME] Black Out (Current Version: Preview 3.1 for Fission 2.1) - xda-developers
Black Out ver. 3.1
View 43 Replies
View Related
Nov 17, 2010
Big thanks to justintoxicated for a lot of bug work and some photoshop.
A huge thanks to bouchigo for the help with the new/sweet addition of the carrier change and color in the bar writing/clock....looks awesome!
You can see credits, warnings, and original trouble shooting here;
TestBlackoutKangblue2.1 Theme for Fission 2.1
swype credit;
[url]
[url]
light blue time download link^11/27/10
[url]
dark blue time download link^ 11/27/10
-Expect a slightly longer reboot after installation. Should be a one time thing.
View 49 Replies
View Related
Nov 15, 2010
I went from apex to Fission 2.1 and i had blur email installed on apex because i can't set up my college email acct on the email app that is already installed with both apex and fission. Is there any way to get back the blur email on fission? or can someone help me set up my email acct another way. It is through outlook.
View 1 Replies
View Related
Nov 30, 2010
I made this for myself.It is not an approved theme.It is put together different then the others I have put out (for 2.2.2).Please check the Change log at the bottom of pics. I just booted it on 2.2.2 and am up and running fine so far.It is still in the testing faze. Do not apply this and then cry to the guys at Fission about problems.Do read the change log before applying. Its the same theme I always like with a little lighter application.It does not have a base in black out any longer. The base was taken from one of the direct 2.2.2 download themes.
View 26 Replies
View Related
Oct 14, 2010
[ROM]FRF91 AOSP Fission - Beta Preview - Droid Forum - Verizon Droid & the Motorola Droid Forum
Saw this posted, has anyone tried it out yet?
Seems a lot like RubX, made from same person I believe.
View 15 Replies
View Related
Nov 19, 2010
All credit goes to those who created and updated these awesome themes!
[THEME] Revolution Remix for Fission 2.1 (Now updated for 2.2.1!)
[THEME] Kangerade Blue for Fission 2.1 (Updated for 2.2.1!)
[THEME] Revolution for Fission 2.1 (Updated for 2.2.1!)
[THEME] NexTheme for Fission 2.1 (Now updated for 2.2.1!)
[THEME] Galaxy S for Fission 2.1 (Now updated for 2.2.1!)
View 4 Replies
View Related
Nov 28, 2010
whats the difference between the themes for fission and apex, or is there no difference?
View 17 Replies
View Related
Oct 25, 2010
Droid Life Forum View topic - [THEME] Kangerade Blue for Droid X.I love this theme just need the white font color for notifications and texts and what not.
View 17 Replies
View Related
Nov 28, 2010
I'm calling it final for Fission 2.1 and just booted it up fine on 2.2.1.
First a warning from jaroch on 2.2.1 usage;
Blkkangblue final theme for Fission 2.1 and running on 2.2.1 currently
Expect a long reboot as the name/carrier color changes cause that.
Big thanks to justintoxicated for a lot of bug work/help and some photo shop.
A huge thanks to bouchigo for the help with the new/sweet addition of the carrier change and color in the bar writing/clock....looks awesome!
Shout out to dhoffman1421 for being the first to toss it on 2.2.1 and reporting back.
Props to colchiro for the link for fold animation.
Warning; theme uses wide screen dx camera and notepad, etc.
blkkangbluefinallghtblue.zip
light blue time download link^11/27/10
blkkangbluefinaldrkblue.zip
dark blue time download link^ 11/27/10
----------------------------------------
animated versions;
http://www.mediafire.com/?0nc8itn998ebjg3
light blue time download link with fold animation^11/28/10
[url]
light blue time download with fly in and flip mix^11/28/10
[url]
dark blue time download with fold animation^11/28/10
[url]
dark blue time download with fly and flip mix animation^11/28/10
(did not load these last two animated ones, please report any issues with them or anything else....should be fine).
----------------------------
Install;
drop on sd card then:
go into recovery, mounts, mount system, back out to install from zip, chose zip, chose your zip and yes install, go to reboot when done. (may not be exact steps).
do one more simple reboot if you think its fun....lol....wouldnt hurt anyway.
-------------------------------
next: ?
---------------
more credits;
animation link:
[How To] + [MOD] Custom Transition Animations
You can see credits, warnings, and original trouble shooting here;
Blkkangbluecircbat theme for Fission 2.1 gone final (?)
swype credit;
Download: Blue/Red/Gold Swype Keyboards - Droid Life: A Droid Community Blog
View 32 Replies
View Related
Nov 15, 2010
Black Out
Preview 5.1
for Fission 2.2.2
Brought to you by javroch
Feel free to repost, but please ask and always include a link back to this original post at all times.
[THEME] Black Out (Current Version: Preview 5.1 for Fission 2.2.2) - xda-developers
View 22 Replies
View Related
Mar 5, 2013
So i flashed my evo 3d to boost and now in a boot loop??? ive tried installing ruu's but nothing seems to work.
View 2 Replies
View Related
Sep 10, 2012
So, I just flashed the CM10 nightly for the Samsung Epic 4g [URL] and I am stuck on the boot screen. I am on CWM 6.0.1.1....
View 3 Replies
View Related
Jun 30, 2010
I just used the xda thread... [TUTORIAL] IDIOT-PROOF Root Guide! NAND Unlock and ADB Update!! - xda-developers to root and flash my stock Rom. I followed it word for word all the way through step 34, it is stuck going through the sprint / 4g splash page it will not turn off I am afraif to do a battery pull casue I do not want it bricked my phone is great ver3 release day order.
View 3 Replies
View Related
Nov 13, 2010
I had an issue flashing the newest version of the leedroid ROM. To start my phone was running stock un-rooted Android 2.1. This is what I've done
1) Rooted the device using the Unrevoked method. Everything with this went fine. I get the Superuser app and I can get the '#' prompt at a terminal.
2) Then I partitioned my SD card using Rom Manager in preparation for A2SD+
3) Then I booted into clockwork mod recovery and wiped data/factory reset, wiped cache, and wiped dalvik cache
4) Then I tried to flash the leedroid rom from zip on the sd card
After reboot my phone appears to be stuck on the HTC screen and will not move forward. But if I take out the battery I can boot back into recovery mode. So it appears my phone is not broken, but it clearly isn't working. I've tried flashing a number of different ROMs but get the same result each time.
View 5 Replies
View Related
Oct 31, 2010
I think I might be in serious trouble here. I'm new to smartphones in general and wanted to root my Evo so that I could get rid of that annoying bloatware and maybe find some cool functionality.I'm new to forums too, but I did dig through a ton before I posted this and didn't see a solution to my problem.I used unrevoked 3 to root the phone. Worked fine. Tried to install Fresh through Rom Manager, but couldn't get it to flash by installing from sd card. Sort of abandoned that and moved on to Bugless Beast. I downloaded that to my computer transferred to my phone and tried "install from sd card" again. No luck, it just gave me the startup screen "htc evo 4g" and stayed on.I used nandroid to restore to my previous settings with no problem. I decided to partition the hardrive and try to flash bugless beast again. This would have been fine, but I didn't realize that partitioning removed the clockwise back up file.So, now I don't have anything to restore back to and it is stuck on the "htc evo 4g" screen.I can still get into the hboot, so its not a total loss yet.
View 7 Replies
View Related
May 25, 2012
i installed clock work mod recovery using odin multidownloader in my galaxy fit s5670, then i gave factory reset in cwm recovery. now my phone is not booting.stuck at start-up,looping around..
View 1 Replies
View Related
May 17, 2012
I got galaxy gio, which has Android 2.3.3, today at a worse moment of my life, I update my gio from Setting > About Phone > Update then it ask me for sign in, I login then it start updating after some time it says your phone is now restarting, then a 20 - 30 mints loading comleted and it stucks, then I restart it doesn't do anything, it only stucks at boot up screen, on that my screen just showing me Galaxy Gio S5660 and then nothing happened just stuck, I again restart but it stuck.
now I want to restore it to factory setting by pc, if it possible, I thing i have disturb the OS so I can only restore it by from my PC. I have lost my android
View 2 Replies
View Related
Oct 3, 2010
Turned on the phone this morning, it loaded fine. It then rebooted and sits at the HTC screen. I didnt even get a chance to do anything.
View 8 Replies
View Related
May 3, 2010
I recently tried flashing Demagless 2.0.8 and now my phone is stuck on the HTC Black logo screen while the phone is starting up I have done a clean wipe and reflashed demageless 2.0.7.2 and also fresh 2d but now I get the same problem previously I've had fresh 2d installed and worked perfectly fine. I can still access my root but no matter what rom I flash it won't start up.
View 5 Replies
View Related
Oct 31, 2009
I have rooted my phone and have now the recovery mode from HD blog. It's was working fine. So I tried to get the Galaxhero ROM installed. I did the following steps:
1) Reboot in recovery mode (Volume down + both Call buttons) and choose "Nandroid backup" to save a backup of your current ROM just in case.
2) Backup G apps
3) Then, choose "Wipe data/factory reset". The phone will reboot in recovery mode again.
4) Choose "Apply sdcard:update.zip" (second menu entry on the recovery screen)
5) Restore Google applications ("Restore G.Apps")
6) "Enable root (su)".
But then enable root failed! Anyway I went on further with reboot system. It rebooted till the "android HD logo" showed up and then suddenly the screen went off and it seemed like my phone went off. So I went back to the recovery mode and did the following steps:
Wipe data
Restore backup
Restore G apps
Enable root SU, but again enable su failed!!
Again I choose reboot system, and when the reboot came again to the "android HD logo". It stuck there and stayed looping.
First, why do I still see the android HD logo again because I did a wipe!
Second, How can I get my phone working again!
View 8 Replies
View Related
