I'm trying to compile omegamoon's kernel, it's a gitbub project.
I compiled it and I have the zImage.img. Using Finless ROM Flash Tool I flashed Finless 2.1 ROM, and works great. Then I flashed the same ROM but instead of the kernel that comes with that ROM I put my zImage there. As result my pen is not booting, and it's stuck in a black screen with two penguins..
View 1 Replies
I Have a galaxy note 2 n7102 (Clone).I have rooted it 2 days ago.i have the android stock boot animation but when i added a custom boot animation, when i rebooted the screen goes black and then the phone starts up
I tried to put it in system/media and data/local and change boot animation and Samsung in system/bin and reboot but nothing happens.
Model no- Reliance ZTE V9C
Not booting & stuck on Reliance welcome screen. I have not installed any apps in recent time neither did any sorts of tweaking.
I just rooted from leakv3 and i loaded evileris and when i boot phone it goes to 3 droids and then black
View 9 Replies View Related! i was trying to install a new custom ROM ( C.A.M.P ) i had Cyanogenmod 10... i came to where i flash the new rom on my computer then when i wanted to fastboot reboot to install zip on phone, my computer shuts off, now when i turn my phone on it lights up black and stays like this and i cant do anything(no CWM no nothing) so i remove battery to turn off....
Phone:Xperia Arc S LTI8i
So I was trying out the CM7 for xperia arc by the freexperia team. It was epic. so i also tried the CM9 release by them..
-> I downloaded the CM9 anzu for my arc S
-> Extracted the files
-> Used fastboot to flash boot.img
-> And then: fastboot reboot
Instead of the FreeXperia splash screen welcoming me.. i was given a black screen.. The phone does turn on.. but then there is nothing. No splash screens. nothing.
Is there anyway to boot straight into CWM?? recovery?? Did i brick my phone for good?
my tablets android system and now it's stuck on the booting screen. What should I do?
View 2 Replies View Relatedi installed clock work mod recovery using odin multidownloader in my galaxy fit s5670, then i gave factory reset in cwm recovery. now my phone is not booting.stuck at start-up,looping around..
View 1 Replies View RelatedI recently tried flashing Demagless 2.0.8 and now my phone is stuck on the HTC Black logo screen while the phone is starting up I have done a clean wipe and reflashed demageless 2.0.7.2 and also fresh 2d but now I get the same problem previously I've had fresh 2d installed and worked perfectly fine. I can still access my root but no matter what rom I flash it won't start up.
View 5 Replies View Relatedjust tried to root my phone and its stuck on a black screen with a pic of a desire with a red triangle with an exlimation mark in it! have i bricked my phone?
View 1 Replies View Relatedmy phone is not booting into stock recovery and it is stuck in boot loop, only download mode is working.
I have downloaded the firmware rom . and Flash it many time through Odin 3.07 and it's still stuck in boot loop.
The emulator screen does not show up with new zImage... The steps I followed are: 1) Downloaded the android kernel from "git clone git://github.com/CyanogenMod/cm-kernel.git" 2) extracted config file from config.gz from /proc/config.gz in emulator 3) copied config file to .config in "cm-kernel" directory 4) export CCOMPILER=${HOME}/android/system/prebuilt/linux-x86/ toolchain/arm-eabi-4.4.0/bin/arm-eabi- 5) make ARCH=arm CROSS_COMPILE=$CCOMPILER oldconfig make ARCH=arm CROSS_COMPILE=$CCOMPILER menuconfig make ARCH=arm CROSS_COMPILE=$CCOMPILER
View 5 Replies View RelatedI just bought an android google tv from dealextreme. It has the Jellybean 4.2.2 and I was thinking if i add a custom rom or something it will make it run fast. There is issues on the 1080p streaming also for me.
View 1 Replies View RelatedI have a problem with my google tv , MK808B
It doesn't boot
I have black screen after "android"
It seem to be a real one, not a fake, I open it and see it on another site, with pictures from the real and the fake
I try to flash another firmware, but I can't put it in flash mode, when I press reste button and connect to usb from otg to my pc, my pc doesn't detect mk800b
I just installed an app (Contact Owner) and once I rebooted my phone, I can never get back into the system.
That shall be the only harmful action that I had done, can I know if there's any way that I can boot into safe mode to uninstall that particular app?
Note:I read some links, including this. Some said, HOME + Power, some said MENU + Power. Am trying both now and see which is gonna work.Tried both, not working How long do I have to press on the buttons? Is the "Power" button the right most bottom button?
I updated to BB 0.4 from a previous old 2.2 installation. Now I'm stuck in an endless reboot loop! It alternates between Droid and the red Droid eye!
1) I copied update.zip to the root of the drive.
2) I installed update.zip
3) Install was successful
4) Rebooted
I did a search and found no information on a similar situation. Here's what happened. I recently rooted via unrevoked 3.21, then flashed a stock rooted rom, by OMJ, his most recent ROM. I ran the phone for a day with that ROM and kernel that it came with, and everything was working good, battery life seemed good for the day. Well, I decided to flash the 4.19 netarchy kernel this evening, and after doing so, the phone got stuck in bootloop, and I had to do a battery pull. TO flash the kernel, I did this: flashed from clockwork recovery to RA 1.8. Wiped cache, wiped dalvik cache, flashed kernel from SD card, rebooted phone. Then it was just stuck in bootloop, endlessly rebooting. I pulled battery after about 25 minutes, and rebooted into Recovery, which was RA at this point. I wiped all data, cache, davlik. flashed the OMJ ROM again, flashed the netarchy kernel, rebooted. same thing. Pulled battery again, rebooted to recovery, wiped data, cache, davlik. Flashed ROM, no Kernel this time. Booted fine. went into ROM manager, flashed back to clockwork. booted to recovery. wiped data, cache, davlik. restored nandroid backup from earlier today.....
View 10 Replies View Related4.4.2 Qualcomm 8620,8660 kernel will appear screen flicker problem, does not know that others have, ask what the solution! The lock screen after screen flicker problem press the power button or the home key to unlock will! The camera flash photos would restart!
View 2 Replies View RelatedWhere in kernel source I should look at events that causes screen off and on? I know there is early_suspend and resume but it looks like my phone awake state is much more longer so I try to find out how to bind to this events in kernel.
View 1 Replies View RelatedMy HTC One X Plus fell down recently, and has got a ' triangle flag' like mark on the top left part of the screen. (But not on the Gorilla Screen). But each day, when I see it, the black mark getting disappeared , as forming lines in the triangle flag (the original screen getting viewed through the lines).
When I try the phone screenshot option, the complete screen is captured with no black mark on it.
When I contacted the service center, they asked me to replace the screen. That is very costly
Is it really needed to replace the screen or will it get disappeared eventually?
I am running cm7.03 with lordmodue6.7 on my htc inspire 4g. I just went to look at a video on youtube and noticed that their was no visual just audio. I uninstalled it then installed, but no luck. Afterwards i decided to check all other apps that play video like vevo and same problem. I uninstalled adobe flash player then installed it, but ALSO NO LUCK =[. I then checked youtune on my browser and same problem..
View 5 Replies View RelatedMy Galaxy S4 screen is just completely black. I can turn on my phone and even put in my pattern code on the screen, but it remains black. I have tried to reset it multiple times and I don't really know what to do. Any possible fix without having to get a repair.
View 3 Replies View RelatedI have an HTC Droid Incredible LTE 4 and for the most part it's fabulous...
But when I'm talking on the phone the screen goes black and if I try to unlock it to schedule something in my calendar, etc., the screen just goes black over and over and won't stay active long enough for me to unlock the screen. This is exceedingly frustrating since I can't use any apps when I'm on the phone, and I have to push the button on the top to get the screen to light up at all if I'm on the phone, it doesn't automatically light up if I take it away from my ear to look at something on my phone.
My Tablet shows black screen after a while animation android logo and no more work. So I tried factory reset. But factory reset doesn't proceed to recover menu. It shows only factory reset logo (Android logo with red triangle) like screenshot.
My tab has only 3 button (power, Volume up and down). I tried both of them. But the logo doesn't move. How to factory reset?
My tab Configuration:
Duocore M7200 7inch, 1.2GHz, 512MB DDR3
Samsung S3 Black-screen on startup?
View 2 Replies View RelatedI'm trying to build CWM for the HP Slate 7 Plus, but both touch and non-touch builds coming from the CWM Builder and manually built builds give a black screen with a few white lines when booted into recovery. The stock recovery.img I provided to the builder is valid because people were able to reflash the same recovery.img via Flashify with no issues, which is the same method used to flash the defunct CWM. I don't have the Slate 7 Plus, so I can't test things myself
The best I can do right now is debloat, deodex, and pre-root ROMs, as well as install more system apps.
I was following this guide to upgrade my Sanei n10: [URL] In recovery mode I have installed the rom.zip, but after I pressed the wrong button and it turned off. Now, when I turn it on, leave the writing sanei and after few second remains on black screen.
If I try to entry in recovery mode with the vol+ button, it remains with the Android robot lying down with a red tiangolo, with no options.
What can I do to recover my tablet?
I flashed a rom then i went to flash gapps the bar was loading then it went off the screen and it didn't do anything.i waited about 5 mins and still nothing.i hit the power button and it shut off i go to turn it on and all there is a blue light where notifications show.black screen nothing else...
View 5 Replies View RelatedI have an issue with the chrome browser starting with a completely black screen. At first I thought it was only my last phone (RAZR HD), but the problem is also present on my Verizon Note 3. If it were just an issue on a single phone, I'd probably ask in specific phone forums, but it's happened on two different phones now.
I'm presuming that the problem might be caused by an app I'm using, but the problem is intermittent so I can't tell if the issue subsides when I uninstall certain apps.
I am trying to open fastboot screen in my arnova 7g3 tablet i pressed reset button and also pressed power button simultaneously but its showing black screen what should i do my tablet is rooted by superuser
View 1 Replies View Related