I've updated my Galaxy S II to ICS via Odin but wanted to erase my flash history so flashed an old bootloader .tar file, erased the flash history but now want to flash the ICS bootloader back.I've extracted the sbl.bin file but cannot create a tar file that Odin recognises. Have tried using 7zip but Odin locks up when I try and flash it.
how to create a flashable .tar file.
View 1 Replies
I have a firmware for my galaxy ace named S5830XWKTM_S5830OXXKT3_S5830XWKT7_HOME.tar.md5 and I wanted to edit the baseband so I could make it work in my S5830L by just changing "amss" file...
But I can't change it if they are in .md5 and if I change the file to .zip and transfer amss, I can't change it back to .md5
How can I turn S5830XWKTM_S5830OXXKT3_S5830XWKT7_HOME.tar.zip into S5830XWKTM_S5830OXXKT3_S5830XWKT7_HOME.tar.md5
im wondering is there such way to create a zip file with multiple zips in to flash at once? Purpose of it is to save time flashing 5 different zips through recovery every time we flash new roms?
View 2 Replies View Relatedis it possible to flash any stock 4.0.3 rom with odin?
View 2 Replies View RelatedI bricked actually my phone.
I want to know now, wich is actually the best Android 4.0.3 ROM.
I know how to flash via zip and via odin.
I dont know how to flash kernel
I wanna use a Android 4.0.3 ROM with DarkKnights or Siyah Kernel, tell me what you think about it.
First flash the ROM then Kernel?
I have a question about the files being used to flash my Samsung Galaxy S2 via Odin.
I have already seen this link [URL]...
I am trying to flash the PDA, Phone and CSC back all to normal stock. I have downloaded a firmware and I only have one file with a .dll file. The one file I have is named "I9100BOKK1_I9100TMUKK1_I9100BOKJ1_HOME.tar.md 5" I have extracted the files from here also and it contains boot.bin, cache.img, factoryfs.img, hidden.img, modem.bin, param.lfs, Sbl.bin and zImage.
How with these files and Odin do I flash all three parts. I can't see how to use these files on the above link with instructions for flashing and rooting.
how to FLASHING my Galaxy Mini without ODIN (via PC). because my pc didn't detect my phone. me already try on windows XP, Seven, and Eight. i dont know why this is happen.
my point is.. i just want to flash my galaxy mini without PC/ODIN.
I was wondering if it is in some how possible to upgrade my GT-I9070 from gingerbread 2.3.6 to Kitkat or other custumized rom without having to use odin.
I have a problem with connecting my phone to the my pc, my laptop won't regonize it, I think is a hardware problem.
I removed the OS from my N7100 after I messed up with a kernel. Now im trying to reinstall the cyanogen mod but my computer doesnt recognize the phone, and so my only way of flashing anything to the phone is by using Odin, which only accepts .md5 files. I also have Clockworks Mod Recovery but like I said, my computer doesnt recognize my phone as a device
How can I flash cyanogen mod via Odin? When I download it from the official website its not in .md5 format, it's a .zip.
I just OV galaxy by setcpu but have problem phone was stopped working. So i need ROM stock version VietNam or CM7 for retry up ROM flash by odin.
View 1 Replies View RelatedCan ı flash firmware SM-G900A to SM-G900F with odin ?
View 1 Replies View RelatedI have a Samsung SGH-I897. I was trying to flash from Froyo to GB using odin. I did not root it (I guess I was thinking I didn't need to from stock to another stock fw). It's bricked. I bought a JIG, but nothing happens, just black screen.
View 6 Replies View RelatedI bought my Galaxy Ace S5830i last month. I hadn't installed Samsung Kies until yesterday, when I launched it it prompted a firmware upgrade. First I tried to use kies to upgrade but whenever the upgrade process started (Kies started downloading the firmware files) my device automatically got disconnected..I tried reinstalling kies, restarting my phone but nothing worked.
I then decided to use odin(v1.87) to flash the firmware on my device but it kept failing at first step itself. Here's what it said :-
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iXXLF3_S5830iODDLF1_RST_S5830iDDLF1_HOME.tar. md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
[Code] .....
The phone has been working as fine as ever. Kies never got to the step of INSTALLING the new firmware as whenever it started downloading the firmware files my phone got disconnected so no damage there.
With ODIN I entered download mode but here too it fails at the beginning, so I just switch off my phone and restart it and it works as if nothing ever happened (I've made several attempts)
Today itself i downloaded and tried to flash my S DUOS 2 with stock ROM on Odin v1.85. Though it started and was in initial stage( Flashing boot file), i mistakenly DISCONNECTED the device. Now it's not turning ON !!!!
Device : Samsung Galaxy S Duos 2 S7582
Firmware : S7582XXUAMK3 ODDAMK1
Odin - v1.85
Mistake - Disconnected the device while it was downloading the firmware.
Device Status : Not Switching ON ! , Nothing happens when power key/+ any key is pressed
I've read a lot of topics in online and also saw a lot of video tutorial to Flash my Galaxy Y's stock ROM with odin.In Odin,I've selected every file but whenever I click 'Start' button,it shows me this message in message box.
<ID:0/010>Added!!
<ID:0/010>Odin v.3 engine (ID:10)..
<ID:0/010>File analysis..
<ID:0/010>SetupConnection..
But I can't flash my phone.Now what can I do?
I'm following step by step process to root my gt-s5310 using ODIN 3.07. Started from download mode and connect to the PC is no problem at all. ODIN finished with the GREEN PASS. When I tried to open recovery mode, only android recovery mode is open(but malfunctioning, going no where when I press the home button) that recovery mode also don't has "install zip from sd card" option.
My android version is 4.1.2 . Baseband version S5310DXAME2. Kernel version 3.0.15-1521875 se.infra@SWDA2309#1
Attached is the recovery mode picture
I am currently trying to repair a soft bricked(stuck in boot loop) Samsung Galaxy S2 (T-Mobile) . I am trying to save the info (contacts,sms,pictures..etc). Would using Odin to flash CWM Recovery and doing a nandroid backup and then restoring the phone to factory settings. Would it somehow save everything in the internal memory and fix the phone?
View 2 Replies View RelatedSo when updating my phone, I was all like 'I know how this show goes' and like an IDIOT I put my Samsung S2 i9100 kernel file on the bootloader spot and it boots to a black screen. I can still put it in download mode, and tried to install it the correct way but that doesn't matter.
View 4 Replies View Related1. Open up Odin Multi Download
2. Under Select OPS, choose Behold2_partition.ops
3. Click PDA, choose the PDA File you are Trying to Flash Rather it Be BH_MAN Rom / or Stock
4. Power Off Phone
5. Make sure you have it connected via USB
6. Hold and Press Volume Down, OK, Power (the red end button)
7. Phone will say Download Mode
8. Click Start on Odin Multi Downloader.
9. Wait a couple of minutes
10. Stock Touchwiz phone working again!
I'm having a problem with my phone, I've had 2 lines show up at the top of my screen in the past couple of days. They're both multi-coloured and definitely look glitchy. They show up even in boot screens, fastboot, recovery, etc. I thought it might have been a problem with Galax0 that I was running, so I tried to re-flash it with Odin, and Odin seems to finish, but the phone does not actually get flashed. It stays at my previous firmware, with all apps installed, but when it reboots with Odin, the screen doesn't work (except in between the two lines at the top, so I can just see the bar at the top). I pull the battery and reboot, and it works, but is very glitchy.
View 4 Replies View RelatedI just got my Behold II with android 1.6 on it.
I don't understand what is root the phone , flash the phone using ODIN to save battery .
Also my phone rightnow when I check the battery information , it said " Android system 88% of battery" " Phone Standon 6% " , Is this because the new Android 1.6 making my battery drainning so fast because rightnow I am using with a little of playing around , WIFI , and then I turn off the WIFI again , the battery still didn't last for at least 24 hours . I didn't making too much calling also .
How can I create a backup and then use the flash tool
Order to follow to create this backup and then you can use the flash tool.
Alright this may have been asked a few times, or maybe it could not of been asked. I just can't find the thread related to answering this question.
Okay so my question is, can I flash Galaxo 1.6.2 or GAOSP "without" ODIN flashing or updating my firmware to 1.6? and not then what consequences would occur if I don't flash firmware update before GALAXO 1.6.2 flash. My phone firmware version is I7500ZHJA1 and I believe that is the latest firmware for my region which is still Android 1.5.
I know people talk about this all the time... I found a lot of thread of how to create a flashable zip file.. But every thread has it different than others. So I have tried it several ways and still get errors...
I'm trying to make a flashable zip to push an apk to system/app and I decided to do this to test it out...
This is the update-script I have tested it with
run_program("/sbin/busybox", "mount", "/system");
delete("/system/app/FlashBarService.apk");
package_extract_dir("system", "/system");
run_program("/sbin/busybox", "unmount", "/system");
Ok what I figure is the run_program is to mount system with busybox. Every line i see that it have this on there.. Then Im trying to replace an app from system/app so I put in delete("/system/app/name of app");
then package_extract_dir("system", :/system"); is so recovery can extract and push the zip file
and again run_program to unmount... But recovery is giving me an error status 4
I also deleted that delete line and still got status 4.
Again this is another way I tried it to do it with
run_program("/sbin/busybox", "mount", "/system");
run_program("/sbin/busybox", "mount", "/cache");
run_program("/sbin/busybox", "mount", "/data");
package_extract_dir("system", "/system");
run_program("/sbin/busybox", "umount", "/system");
run_program("/sbin/busybox", "umount", "/cache");
run_program("/sbin/busybox", "umount", "/data");
And this way too
mount("ext4", "EMMC", "/dev/block/mmcblk0p14", "/system");
mount("ext4", "EMMC", "/dev/block/mmcblk0p14", "/data");
package_extract_dir("system", "/system");
run_program("/sbin/busybox", "unmount", "/system");
run_program("/sbin/busybox", "unmount", "/data");
And till got status 4.
Inside my xxx.zip I have it set up this way META-INF/com/google/android
And other folder on root system/app
I have a GS3.
Like I said I have followed several threads about this and all looks different and none worked.
I know this is supposed to be the easies thing to do when it comes to android. But I just need to be directed to the right path.
i need to flash my M-horse 920 mini which is a spread trum phone running under android 2.3. Now i don't know how to flash without making mistake and bricking my phone.
View 3 Replies View RelatedI have a GT-I5510, and it's usb port is broken due to an unfortunate contact with a puddle. So i am trying to flash it to CWM Recovery through wireless communication. I have spent ~6 hours digging the forums, i have a .tar file, and an .img file i can flash, but i wasn't able to find a .zip file to flash through recovery mode. Both Mobile Odin and Flash Image GUI don't support the device, so they are out of the question too. Is there any other way possible to flash an .img file through the phone itself?
View 4 Replies View RelatedI have downloaded the latest ics 4 update file from internet and tried to flash it using recovery, but the process ended in error and cant be flashed.
View 1 Replies View RelatedI just want to know how to create ur own root file for android and wat tools ar needed.i don't want to download , i want to create root file of my own
View 1 Replies View Relatedhow to rebuild a sin file for sony xperia after i have dumped the data. i want to repack the system sin then rebuild the ftf i know how to rebuild the ftf file but i can't find a tool or tutorial on the sin repack.
View 2 Replies View RelatedRecently I Rooted My Device YXYEL G926 (Spreadtrum SP8810). But I Accidently Bricked My Phone While Flashing CWM '&' Finally I Found The Stock ROM Of My Phone. But Its In PAC Format. So How To Flash It On My Phone?
View 1 Replies View Related