I am currently trying to repair a soft bricked(stuck in boot loop) Samsung Galaxy S2 (T-Mobile) . I am trying to save the info (contacts,sms,pictures..etc). Would using Odin to flash CWM Recovery and doing a nandroid backup and then restoring the phone to factory settings. Would it somehow save everything in the internal memory and fix the phone?
View 2 Replies
I'm following step by step process to root my gt-s5310 using ODIN 3.07. Started from download mode and connect to the PC is no problem at all. ODIN finished with the GREEN PASS. When I tried to open recovery mode, only android recovery mode is open(but malfunctioning, going no where when I press the home button) that recovery mode also don't has "install zip from sd card" option.
My android version is 4.1.2 . Baseband version S5310DXAME2. Kernel version 3.0.15-1521875 se.infra@SWDA2309#1
Attached is the recovery mode picture
I have a question about the files being used to flash my Samsung Galaxy S2 via Odin.
I have already seen this link [URL]...
I am trying to flash the PDA, Phone and CSC back all to normal stock. I have downloaded a firmware and I only have one file with a .dll file. The one file I have is named "I9100BOKK1_I9100TMUKK1_I9100BOKJ1_HOME.tar.md 5" I have extracted the files from here also and it contains boot.bin, cache.img, factoryfs.img, hidden.img, modem.bin, param.lfs, Sbl.bin and zImage.
How with these files and Odin do I flash all three parts. I can't see how to use these files on the above link with instructions for flashing and rooting.
I bought my Galaxy Ace S5830i last month. I hadn't installed Samsung Kies until yesterday, when I launched it it prompted a firmware upgrade. First I tried to use kies to upgrade but whenever the upgrade process started (Kies started downloading the firmware files) my device automatically got disconnected..I tried reinstalling kies, restarting my phone but nothing worked.
I then decided to use odin(v1.87) to flash the firmware on my device but it kept failing at first step itself. Here's what it said :-
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iXXLF3_S5830iODDLF1_RST_S5830iDDLF1_HOME.tar. md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
[Code] .....
The phone has been working as fine as ever. Kies never got to the step of INSTALLING the new firmware as whenever it started downloading the firmware files my phone got disconnected so no damage there.
With ODIN I entered download mode but here too it fails at the beginning, so I just switch off my phone and restart it and it works as if nothing ever happened (I've made several attempts)
I've read a lot of topics in online and also saw a lot of video tutorial to Flash my Galaxy Y's stock ROM with odin.In Odin,I've selected every file but whenever I click 'Start' button,it shows me this message in message box.
<ID:0/010>Added!!
<ID:0/010>Odin v.3 engine (ID:10)..
<ID:0/010>File analysis..
<ID:0/010>SetupConnection..
But I can't flash my phone.Now what can I do?
I bricked actually my phone.
I want to know now, wich is actually the best Android 4.0.3 ROM.
I know how to flash via zip and via odin.
I dont know how to flash kernel
I wanna use a Android 4.0.3 ROM with DarkKnights or Siyah Kernel, tell me what you think about it.
First flash the ROM then Kernel?
Boot loop. I don't care if I get my S2 working again or not, but I NEED the files on my internal storage! I have a Mac and a PC, both with ADB installed, but no matter if I'm in recovery, or Odin Download Mode, I can not access my device via ADB. Is there anything I missed out, or is it just not possible at all, and the only thing I can do is wiping it?
View 1 Replies View Relatedhow to FLASHING my Galaxy Mini without ODIN (via PC). because my pc didn't detect my phone. me already try on windows XP, Seven, and Eight. i dont know why this is happen.
my point is.. i just want to flash my galaxy mini without PC/ODIN.
I just OV galaxy by setcpu but have problem phone was stopped working. So i need ROM stock version VietNam or CM7 for retry up ROM flash by odin.
View 1 Replies View RelatedHow to install cwm recovery,to flash rom and any available custom roms for this phone...
my phone is a galaxy s3 clone
Model number
GT-I9300
Baseband version
MAUI.11AMD.W12.22.SP.V5,2012/10/23 14:35
Kernel version
3.0.13
root@nebula#1
SMP PREEMPT Mon Jan 21 16:59:34 CST 2013
Build number
APLS.ICS2.MP.V1
Custom build version
004120121
Alright this may have been asked a few times, or maybe it could not of been asked. I just can't find the thread related to answering this question.
Okay so my question is, can I flash Galaxo 1.6.2 or GAOSP "without" ODIN flashing or updating my firmware to 1.6? and not then what consequences would occur if I don't flash firmware update before GALAXO 1.6.2 flash. My phone firmware version is I7500ZHJA1 and I believe that is the latest firmware for my region which is still Android 1.5.
Baseband version - I8552DDAMH1. GT-I8552
How do i install CWM Recovery on my unrooted Galaxy Grand Quattro using Odin v3?
I have a Samsung SGH-I897. I was trying to flash from Froyo to GB using odin. I did not root it (I guess I was thinking I didn't need to from stock to another stock fw). It's bricked. I bought a JIG, but nothing happens, just black screen.
View 6 Replies View RelatedToday itself i downloaded and tried to flash my S DUOS 2 with stock ROM on Odin v1.85. Though it started and was in initial stage( Flashing boot file), i mistakenly DISCONNECTED the device. Now it's not turning ON !!!!
Device : Samsung Galaxy S Duos 2 S7582
Firmware : S7582XXUAMK3 ODDAMK1
Odin - v1.85
Mistake - Disconnected the device while it was downloading the firmware.
Device Status : Not Switching ON ! , Nothing happens when power key/+ any key is pressed
i had custom PMP light rom installed on my device. i then wanted to install SilverNexus kernel given here:URL.... so downloaded it & flashed it via CWM recovery
after that it keeps boot looping, also cant enter into CWM recovery. can't even install old kernel via Odin. odin is not detecting it anymore.somehow if i can replace my old kernel files read many threads. seems like Heimdall....but i m getting "ERROR: Failed to initialise protocol!" wen trying to generate pit file
i have often experienced this issue. after dialing any phone number and trying to save that number from call log to existing contact it is not working. Means, it tries to open the contact but giving error. did any one has experienced this issue and like to hear your views or corrective measures.
View 1 Replies View RelatedI have the Samsung Galaxy Tab 3, 7" (WIFI-ONLY).
Firstly, let's start by saying that I ended up rooting it after a while because it got boring having the simple, unmodified android.
It seems creativity got the best of me, and I ended up wanting to switch back to my normal android days. The problems started when I looked for the ways to upgrade my device, and it sais my device had been modified (rooted). So then I tried deleting SuperSU, thinking that would unroot, but nope... I then went to my great friend, we all know as Google. I then found the firmware, however didn't notice it said 3G, not just WIFI.... and loaded it onto my tablet following the instructions leading me to use Odin. I now have a Samsung Galaxy Tab 3 WIFI only, with 3G Firmware.
After countless hours, days, and now weeks of trying to get it back to the normal firmware, all my attempts result in an error on Odin, and here's what I get:
First, I just load the .md5 file, and this happens.
---
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T210XXAMK5_T210OLBAMK1_T210XXAMK5_HOME.tar.md5 is valid.
[Code] ....
Now, what do I do to get my precious tablet back to normal? , since I have the 3G version, I'm required to have a sim card which I can't put in because there's no sim card slot (it's a WIFI tab). I can't even use WiFi, because it won't turn on without a SimCard.
I have the Samsung Galaxy Tab 3, 7" (WIFI-ONLY).
Firstly, let's start by saying that I ended up rooting it after a while because it got boring having the simple, unmodified android.
It seems creativity got the best of me, and I ended up wanting to switch back to my normal android days. The problems started when I looked for the ways to upgrade my device, and it sais my device had been modified (rooted). So then I tried deleting SuperSU, thinking that would unroot, but nope... I then went to my great friend, we all know as Google. I then found the firmware, however didn't notice it said 3G, not just WIFI.... and loaded it onto my tablet following the instructions leading me to use Odin. I now have a Samsung Galaxy Tab 3 WIFI only, with 3G Firmware.
After countless hours, days, and now weeks of trying to get it back to the normal firmware, all my attempts result in an error on Odin, and here's what I get:
First, I just load the .md5 file, and this happens.
---
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..[code]....
Now, what do I do to get my precious tablet back to normal? , since I have the 3G version, I'm required to have a sim card which I can't put in because there's no sim card slot (it's a WIFI tab). I can't even use WiFi, because it won't turn on without a SimCard.
[URL] .... I tried flashing via odin and recover back my device using the shown link. I got the following error as shown in image. And i am not able to install any custom rom also. Every time i do get stuck on the logo of the device. And when i remove battery it gets back to the normal recovery mode. What shall i do now the device is bricked and i cannot get it back.
View 1 Replies View RelatedSamsung Galaxy Tab GT-P1010 no display got stuck in ODIN while upgrading to GB
View 2 Replies View RelatedHow is it I had the kind of mobile Samsung Galaxy S2 GT-I9100G.
I wanted to install ROM through the program odin mobile and knee after installing version fails the device is to comment on the Samsung logo, which is in the type of device and I will open Recovery Mode I could not and I want Open Download Mode opens to I was not recognized on the device.
1. Open up Odin Multi Download
2. Under Select OPS, choose Behold2_partition.ops
3. Click PDA, choose the PDA File you are Trying to Flash Rather it Be BH_MAN Rom / or Stock
4. Power Off Phone
5. Make sure you have it connected via USB
6. Hold and Press Volume Down, OK, Power (the red end button)
7. Phone will say Download Mode
8. Click Start on Odin Multi Downloader.
9. Wait a couple of minutes
10. Stock Touchwiz phone working again!
I'm having a problem with my phone, I've had 2 lines show up at the top of my screen in the past couple of days. They're both multi-coloured and definitely look glitchy. They show up even in boot screens, fastboot, recovery, etc. I thought it might have been a problem with Galax0 that I was running, so I tried to re-flash it with Odin, and Odin seems to finish, but the phone does not actually get flashed. It stays at my previous firmware, with all apps installed, but when it reboots with Odin, the screen doesn't work (except in between the two lines at the top, so I can just see the bar at the top). I pull the battery and reboot, and it works, but is very glitchy.
View 4 Replies View RelatedOdin only detect my Samsung Galaxy Pocket S5300 when the power is off.
In a meanwhile:
- Odin cannot detect in Download mode.
- KIES is able to connect, detect & do the backup.
- I've tried many versions of Odins.
- Odin(s) is able to detect other phone (Galaxy Mini S5570).
- PC could detect the driver and do the file transfer.
Why only when the power off id:com turns into yellow (or green in Odin 3) ????
Can i move my black berry storm contacts saved in my pc to galaxy?
View 2 Replies View RelatedI need a Flash Player to watch flash videos on HTC Explorer and Samsung Galaxy Ace S5830.Which is the best ? Or should I install a browser ?
View 8 Replies View RelatedHow can I sync all my apps from phone, Samsung Galaxy 3 to my tab 2 Samsung tablet to my lap top? I want all info (excluding duplicates) to sync so I have info on all devices. What app can I use?????
View 11 Replies View Relatedis it possible to flash any stock 4.0.3 rom with odin?
View 2 Replies View RelatedWhen connecting my Galaxy-S to the Samsung Kies software, my telephone shows up with an incorrect telephone number. I did change the sim-card (and subsequent number) since first using it, but I never logged intio Kies with the old sim-card.The phone is rooted.How do I get Kies (or my Samsung phone) to show my current telephone number?In the phone properties (Menu, Settings, About, Status) the same wrong number is shown.When calling, the receiver sees the correct telephone number. So the issue is not operator related but telephone related.
View 2 Replies View RelatedI tried to upgrade my P3100 to Slim-p3100-4.2.2.build.6-OFFICIAL following the tutorial i found.
Result of this is that now tablet is non more able to enter either CWM recovery nor odin download mode and after normal boot i can only see a flashing Slim logo on the right part of the screen.
The best i am able to obtain is a "forced upload by key pressing" screen rebooting with all three buttons pressed.Odin can see the device but when i try to re-upload cwm is stits in Establishing connection.