Samsung Galaxy S :: Firmware Update 2.2 / Device Corrupted
Nov 30, 2010
So yeah, basically my Kies crashed while it was updating firmware and now I can't connect my phone to my PC anymore, it just doesn't recognize it. Windows just says something about corrupted device but kies can't recognize it either. And here's the really great stuff. I can't even boot the damn device! It just gives me thing weird logo that has mobile phone and my computer on it, and then some yellow triangle with exclamation mark in between and it doesn't go away. I've tried every button combination and hard-boot with removing the battery but no luck. I'm really really frustrated because I can't use this thing at all now! What a great update software you got there Samsung, really great (endrant). So can anyone give any pointers what I should do?
View 5 Replies
Oct 3, 2010
Pls advise me the best unofficial firmware update to download. Froyo based.
View 4 Replies
View Related
Aug 16, 2010
I have been waiting for kies to say that new firmware is available (when it works!) and finally it knows there is an update to my JF3 - presumably JM1.
However, is says that 'this device's version cannot be updated'
My SGS was bought from Mobiles.co.uk and is using an Orange SIM and as far as I can tell it is not locked or branded.
The current firmware is
PDA ...XXJF3
Phone ...XXJF3
CSC ...XAJF3
Is this an 'Orange' CSC?
How I can get it updated?
View 49 Replies
View Related
Jun 24, 2010
Seems like a silly question but i had an HTC desire which i swapped for the galaxy s for obvious reasons... anyway in the settings/about phone section on my desire there was an option to check for firmware updates but in the galaxy there is not so my question is this...
View 6 Replies
View Related
Oct 16, 2010
I just plugged into Kies and performed a Firmware update, which I assume was the Froyo update. It all ran it's course perfectly and the phone then went to reboot. Following this, it hung on the Galaxy S animated screen before simply going to a black screen (I know the phone is still on, because the two bottom corner buttons will light up if pressed).
I realise that this black screen is quite common, and that people suggest booting into recovery mode. The problem is, I've never been able to get my phone into recovery mode. I turn the phone on and hold down Power + Home + Voume Up for a couple of seconds and then let go... it does nothing, it just goes onto the Vodafone screen and then carries on booting.
I also tried holding down these buttons for a little longer, but all that it does is pushes the phone into a constant restart loop (as obviously I'm holding down the power button).
View 9 Replies
View Related
Aug 25, 2010
What's the newest firmware update for SGS? And what's the best of the 2.1 v.?
View 2 Replies
View Related
Oct 15, 2010
I just updated to the new version through Kies. As soon as my phone booted and I exited lock screen, a lot of popups of processes that crashed show up. This includes android.process.acore, com.google.processes.gapps, Daily Briefing, calendar... pretty much everything shows up and I don't have access to anything on the phone. Apparently usb debug got back on so I can't get kies to recognize the phone.
I have a contract-free galaxy s from germany. Rooted. Uninstalled ryans lag fix through market before upgrading. I don't know what I did wrong. What can I do?
View 4 Replies
View Related
Sep 13, 2010
I would have thought that a firmware update via Kies would preserve user data, contacts, apps I paid for from the market, phone settings etc. But after going from I9000DXJF4 to I9000DXJG4 using that appalling excuse for software (Kies) I have a completely empty device with just stock standard apps. No warnings to click through about wiping data, no strange error messages on the device. Is this normal? If so I might as well put my SIM card back in my iPhone until there is a consensus build of Froyo out for the Galaxy S as re-downloading and resyncing everything each time.
View 8 Replies
View Related
Nov 10, 2013
Yesterday I was having fun trying out the secret codes (like *#*#4636#*#*) and tried out the touch screen code. Then clicked on update (firmware).
Then the touch was not working. I tried taking out battery and putting it back on. Tried factory reset after backing up data with Kies. Tried rooting the simplest way. Tried to flash using Odin with a recovery and pit file. Still nothing is working.
View 4 Replies
View Related
Aug 20, 2010
So a while back I was transferring some files between my computer (Win7) and my phone and the phone froze; against everything I know about usb storage devices I disconnected the phone from the computer (don't ask why, I know I f'd up), restarted the phone and all worked ok... except, since then, every time I connect the phone to the computer I get this message about the internal sd card:
View 8 Replies
View Related
Jul 21, 2013
My 9300+ (chinese mtk6577) is dead... I have to updated wrong firmware and my phone will don't turn ON again, when I use the SP Flash Tool appears the message: "Firmware Upgrade could not be executed without PMT. Please "Download" ONLY first to create PMT on the target!
My internal partition is corrupted and i can't create PMT because my phone don't Turn On, but my USB is recognized by windows.
View 3 Replies
View Related
Nov 4, 2010
I have am in the UK and have a UK unbranded and stock SIMFREE SGS. I'm just tring to install Froyo but keep getting the message "The device's version cannot be updated."
I applied RyanZA's One Click Lag Fix a while ago which worked fine and more recently tried updating the registry hack a couple of weeks ago.
Currently the latest Kies xxxx100 says:
Current Version: PDA:JM2 / PHONE:JM1 / CSC:JM1
I never managed to complete the hack despite adjusting th PC's registry initially to the Scandi version.
My registry editor reads -
Product Code: GT-I9000HKDXEU
Software Revision: I9000XWJM2/I9000XEEJM1/I9000XXJM1/I9000XWJM2
HIDSWVER: I9000XWJM2/I9000XEEJM1/I9000XXJM1/I9000XWJM2
I believe I uninstalled all the OCLF tools and then uninstalled the OCLF program itself.
View 6 Replies
View Related
Mar 5, 2013
i have a problem on samsung galaxy y duos gt s-6102, the device is not able to update the software, either through the device or through Kies, this happens after the bootloop then flash the firmware,
View 1 Replies
View Related
Dec 17, 2012
I'm trying to flash TSP (Touch Firmware in my device I9305 galaxy S3.
I call Keystring_factory.apk with key *#2463# but a windows when try to open the is closed.
The same think happend when i call the app from adb with
Quote:
su -c 'am start -n com.sec.android.app.factorymode/com.sec.android.app.status.touch_firmware'
Is anyway i can force flash the touch firmware without read anything else to the device?Any way i can call the button TSP FW update (kernel) with adb directly?
[URL]
I make a mistake and flash N7105 boot.img to my device as i test somethinks so now my touch doesn't work.
I give you the decompiled Keystring_factory.apk.
I have the device for 17 days and i know i can restore all thinks and go to Samsung Service center but i dont whant to do that on a new device.
View 2 Replies
View Related
Jun 18, 2010
there I am new to this. I would like to find out some information in regards to and update for the samsung galaxy I7500.I live in Australia and it seems the phone cant be updated. Is this true. I have tried on many times to plug my phone into my computer via pc studio.
View 1 Replies
View Related
Feb 15, 2014
I updated my phone earlier today to jelly bean 4.3. Since then, I have stopped receiving network. The EMEI number doesn't show in the device info either. Tried restarting, taking out the sim card and putting it back in. Nothing works. It says this right after restarting, "currently unable to download, try again later". I bought my phone from Qatar and I am currently using it in UK (t-mobile) if that makes any difference, but it was working perfectly fine before.
View 1 Replies
View Related
Feb 28, 2012
My Galaxy S2 is currently running this firmware with Android 2.3.4:
GT-I9100_XEN_I9100CEKI2_I9100XENKH1_I9100XXKI1
CSC = XEN
I get told that there is an update waiting in OTA , so I let it download, reboots, starts to install, then fails, reboots, tells me to try via KIES or contact Samsung. But when I go into Kies... there is no button to let me update my firmware... it just tells me my current firmware version, nothing else like it usually would...
Not custom ROM, no root, battery 100%. Wifi/HSPA makes no difference..My friend has the same phone with the same firmware and it works fine with him?
View 1 Replies
View Related
Nov 24, 2010
I have andoid firmware version 2.2 i cannot install this app from AppBrain Android Market - find the best Android Apps and Games :-( this messages pop always up (NOT FOUND The requested item could not be found)
View 30 Replies
View Related
Mar 2, 2010
The version of the software that is most current is version 6 (the phone shipped with version 3).
To ascertain version: Go to Dialer/Hit Star/#9999#
You will see the PDA; Phone; and Software Version numbers in this section
The T939xxxx6 for PDA AND PHONE and then
Software Version - ending in .006 on the last line.
I was told that the reason that I keep seeing the "No update file exists" message when I check "update firmware" is because I have the latest version.
At some point my phone was updated without giving me a message. I did notice the red and blue arrows yesterday. But there was no message. My SD card mounted and dismounted on its own and gave an error message, and then all references to the error and SD card disappeared.
If your phone is/has exhibited this sort of behavior, you may already have the update.
View 49 Replies
View Related
Nov 13, 2010
I rooted my phone a few weeks back and loaded up the Froyo update, but I fancy a change. What Firmware/theme /ROM etc are you all using?I've been looking around and can't find many places to get such things.I've seen a few people have modified their SGS (physically). I'm not wanting to go down that road, but I'd love to hear from others that have done and wish to post pics of what they've done too.I love my phone far too much to physically modify it.So, what have you changed on your phone?
View 1 Replies
View Related
Nov 24, 2010
I would like change my galaxy s firmware as my current galaxy is the south Arabia version (I9000.JXJPE with Froyo.JPJPG). It has all the arabic apps and no market available. How can I get a European rom, I am from Malta, Europe so any rom which is in English and has market available and working is ok for me. Also will any rom work? or I have to pay attention to anything in particular before trying to flash over my phone?
View 1 Replies
View Related
Sep 1, 2010
I have recently bought a unbranded Galaxy S and I have 2.1 froyo. The current firmware is PDA ;JF1/PHONE:JF1. How do I find out if there is any newer available.
View 3 Replies
View Related
Jul 25, 2010
Why everyone is upgrading their firmware? What is wrong with the default version? it lagged the phone or bugged or sth?
My galaxy default firmware:
Android v2.1 update 1
I9000XXJF3
Is it we must manually update firmware?
What will happen if we update it will my phone brick if i fail?
View 15 Replies
View Related
Jul 27, 2010
Okay, start at the start! got this phone (unlocked pay as you go) from Clove (Excellent) and put my o2 pay as you go sim inside, and straight away im on 3g no problems.....
Then..... See some nice new firmware, (JM2) and think i will have some of that! (Install with odin, not using CSC file Initially, then using CSC -- EURO ? not UK specific? file included with update
And now....
On both counts i have had to manually install the apn settings, (no problem)
But....
Apps are missing from the market place, (new google id & with & without csc file)
Im thinking the CSC file is more important than we think, in that it holds APN information for UK operators, and that when you go into marketplace this CSC file reflects a UK phone in some way, and displays according apps
Battle for Mars ... only the lite version is available HistoryEraser ... is no longer available etc etc...
So two things can anyone with JM2 see those apps?, and other thing I have a feeling that Kies won't update our phones to the latest firmware (Eventually) if our csc file reflects that our phone is a EURO phone, not neccesarily a problem if you use odin but you know what i mean!
Other thing that i wasnt aware of ... using odin resets battery stats. On xda developers there is a fix for this
Last thing......
Can someone who can see these apps upload the csc file somehow.
View 7 Replies
View Related
Aug 14, 2010
I have Samsung firmware version DF29 on my Galaxy and Im wondering is this the most up to date firmware or should I be upgrading to something else? Its the firmware that came on the phone and if its not the latest, what should I be running? I prefer a firmware thats been tested and known to work flawlessly. I dont really want to use any firmware in delopment stages etc.
View 2 Replies
View Related
Jul 29, 2009
A new Firmware relaese has been posted:
the::unwired - FIRMWARE: Samsung prepares for Samsung GT-I7500 Galaxy ROM Update [UPDATE]
View 1 Replies
View Related
Sep 8, 2010
Found this while searching Google:
Download Galaxy S Android 2.2 Firmware
Is that a legitimate firmware from Samsung? Has anybody here try it?
View 2 Replies
View Related
Sep 12, 2010
where can i find the original 2.1 eclair firmware for galaxy s cant find it anywhere accidently overwritten when i flashed it with 2.2 jp2 firmware...
View 2 Replies
View Related
Oct 18, 2010
Checked this morning and there is a new Kies (dated 15/10) available for download from the Samsung mobile UK site. In addition there is also a firmware update. I've installed Kies but not the firmware update yet.
Does anybody know if the firmware is 2.2?
View 6 Replies
View Related
Sep 4, 2010
Any idea which program would allow me to backup the current firmware so all the apps by my service provider can be gotten back when I unroot my phone?
View 2 Replies
View Related
