i am looking to step into the developing ROMs for android
Developing as in porting it to my device from other devices or modifying stock ROMs
after doing all porting or modding stuff in Android Kitchen
How to check whether the ROM is perfectly working or not
i dont want to use it on my cell and brick my cell , want to confirm its working before flashing
View 9 Replies
The Problem is : my Phone is hanging when i use a 8gb SD card and flash a cooked rom.What card do i have : SanDisk 8GB SDHC card.No problem with the card i have tested it the card is OK...What have i tried
1. 1GB ext3 32mb swap
2. 512Ext3 32mb swap
3. 512Ext3 no swap
every time i flash a cooked ROM with apps2sd the phone hangs..for example after flashing the Rom i go to the clock to set my alarm the phone just hangs cant do anything need to pull out the battery and put it back in the phone and re start the phone.this happens for any application i try to open after flashing the cooked rom.i have no problem flashing the cooked rom with my existing 4GB.i also have no problem using the 8GB with stock rom or Nand backup.can any one kindly give me a solution to use the 8GB with a cooked ROM which has apps 2sd
Ran the update and now my 8 gig is toast All my music, pics and stuff GONE
View 2 Replies View RelatedWhy is it that when a new rom is ported/made usually HDMI never seems to be ported. they always write not working or just write dont ask.
View 3 Replies View RelatedThe rom ported from desire c (bt 4.0)And ported to htc explorer(bt 3.0)
View 8 Replies View RelatedI have an HP Touchpad and a Galaxy Nexus, both devices with ICS and good quality screens - but I am looking for games and stuff I can play on them.
I am looking for high quality games, that has both good content and good graphics.
I have games such as Anomaly HD, World Of Goo, Edge, Dungeon Defenders, Osmos HD, Backstab HD. I also heard that portal, counter strike and GTA 3 was ported.
Is there any other good ports? Or high quality games.
I've always wondered, why hasn't the HTC sense Launcher (Rosie) ever been ported to other devices, from other companies, without means of a ROM port? After all, a vast majority of other launchers have been ported - Touchwiz, Xperia eDream, LG UI, Pantech UI... The list goes on really.
So why no love for Sense? I've never heard of any version of Sense ever being ported. Is the underlying framework stuff too complicated or something?
I've been trying to port a rom ovef to my cdma Xperia play from a gsm Xperia play I cannot find what files need replaced to get service for my cdma port attempt I've swapped out my baseband files the rild file I've switched out the (here's the weird part) baseband files and both framework-res.apk and framework. Jar I get the full working service but I have to litereally tear apart the port rom and basically make it a stock rom so its not really a port rom if I have nothing from the port rom. I'm confused and cant seem to get service or any answer on the files needed to swap I knobthe build.prop is built correctly
View 3 Replies View RelatedI ported a rom sucessfully with the only downside that settings doesnt work as I get Unfortunately, Settings Has Stopped.
View 6 Replies View RelatedI have been trying to port cwm5 to my low-end samsung phone.
After a few days of effort, I managed to compile a half-working cwm:Can be flashed by odin1.85
Boots successfully
All keys work, including volume up/down and power
Adb works, I can now mount /system and root my device
Something wrong with display, screen blurred and messed when boot into cwm
Partitions not correctly auto-mounted,
Code:
adb shell mount -a
said: [code]....
3. Can't reboot to android system
I guess it has something to do with MSC partition not mounted, but not sure.
I have rooted my karbonn A6 nd now i want to change its ROM .. i want rom and how to change it because CWM recovery is not ported for my device. ROM's and how to chage them with theme and icons ??
View 3 Replies View RelatedI ported paranoid android from the desire HD to the thunderbolt and almost everything works fine except for the mic and speaker during calls. I have tried everything I can think of with my limited knowledge and was putting this here to see if some more seasoned devs may provide some insight. I'm hoping like hell this isn't kernel related but I seriously doubt it is. Data works fine and so does mms/SMS. I did have to port the ril from our limited ics roms we have to get data.
View 7 Replies View RelatedI tested ACID Sound Mod v7, Xperia Z or V Walkman and another walkam port in my device but All of them dont work on my Device and all another player no longer play any song .
My device : Motorola Razr Maxx AOKP 4.2.2
in topics was told that tested on AOKP and work but dont work for me.
now I Want to know that any app in my device cause this ?
problem is that I installed a ported MIUI ICS version and installed a custom Lockscreen which is this:
The problem actually is....
I CAN'T SEEM TO OPEN IT xD
Can note 3 camera be ported to Galaxy s3 i9300 !
View 3 Replies View Relatedi'm ported rom from another phone with same spec n chipset but when booting, boot animation not show.
View 2 Replies View RelatedI have a huawei u8160 (Vodafone 858 Smart) running Psyke83's Cyanogenmod 7.2 14/8/2012.
I installed the separate USB host zip using clockwork mod recovery, However the usb host mode is not working nothing happens at all when I connect a usb OTG cable to a thumb drive.
nothing lights up , no notifications , the phone doesn't light up if locked.
What should I do?
I ported miui us over to the att s3. One issue I have is when an incoming call takes place it does not show the "1" like it should 1-555-555-5555 instead it shows +55 55 55555.
SAMSUNG-SGH-I747
I'm writing an Android JUnit test and want to copy/reset a test fixture file (it's an SQLite database file.) If I were within the main application, I know I could just place the file in the assets directory and use getResources().getAssets().open(sourceFile).However, this API appears to be unavailable from the ActivityInstrumentationTestCase2 class.Is there an easy way to copy a file over from the testing PC, or should I just keep a fresh copy of a test fixture on the device and copy it over a temporary file?
View 2 Replies View RelatedOne more video about the fancy touchscreen of the Droid X. This one has happier results! Check it out at the link below.Droid X Touchscreen Test See you later. you'll know why this post is short when you read the blog. running downstairs!
View 5 Replies View RelatedI am using ActivityInstrumentationTestCase2 to do some test for an activity. I get a button in the setUp() method like this: protected void setUp() throws Exception {super.setUp(); act = getActivity(); btn = Button)act.find ViewById ( R.id.bike_button ); // this button has been defined in layout} Then I use this button to perform a click in a test method like this: public void testBikeButton(){ //click the bike button btn.performClick();}
View 7 Replies View RelatedI have a project (that compiles and runs in the emulator.) I have a test project that tests part of this project. This test project also compiles with no problems, but when I try to run (test) it in the emulator, I get a NoClassDefFoundError exception on one of the classes my test class tests (I hope that made sense!) when it starts to run in the emulator. This is coming out of the adb log. I looked in the bin directory (of the test project) for the missing class, but could not find it... Should it be there? I found no reference (apk, etc) of the project I am trying to test either in the test projects bin directory. How does the test project get the classes it needs to test against (in the classpath, I assume.) How do the tested classes get moved to the emulator? I did try running the app before testing, so I know it is installed and runs correctly. BTW, I am using netbeans with the nbandroid plugin.
View 1 Replies View RelatedI have never used JUnit before, and now I'm trying to set it up on an Android project.My project under test is fairly complex, including some JNI, but my test project, at the moment, is completely trivial. I have found many examples (that look totally different) online of how to make a test project, but it seems that no matter which one I follow, I get the same results.Here's my JUnit project code:package com.mycompany.myproject.test;
import android.test.AndroidTestCase;public class SimpleTestCaseExample extends Android TestCase {public void test_testOne() {fail("Just Always Fail");When I run, I see the following in Logcat:
stdout INSTRUMENTATION_STATUS: numtests=2
stdout INSTRUMENTATION_STATUS: test=test_testOne
stdout INSTRUMENTATION_STATUS_CODE: 0
stdout INSTRUMENTATION_STATUS: id=InstrumentationTestRunner
stdout INSTRUMENTATION_STATUS: current=2
stdout INSTRUMENTATION_STATUS: class=com.mycompany.myproject.test.SimpleTestCaseExample
stdout INSTRUMENTATION_STATUS: stream=
stdout INSTRUMENTATION_STATUS: numtests=2
stdout INSTRUMENTATION_STATUS: test=testAndroidTestCaseSetupProperly
stdout INSTRUMENTATION_STATUS_CODE: 1
stdout INSTRUMENTATION_STATUS: id=InstrumentationTestRunner
stdout INSTRUMENTATION_STATUS: current=2
stdout INSTRUMENTATION_STATUS: class=com.mycompany.myproject.test.SimpleTestCaseExample
stdout INSTRUMENTATION_STATUS: stream=.
stdout INSTRUMENTATION_STATUS: numtests=2
stdout INSTRUMENTATION_STATUS: test=testAndroidTestCaseSetupProperly
stdout INSTRUMENTATION_STATUS_CODE: 0
stdout INSTRUMENTATION_RESULT: stream=
stdout Test results for InstrumentationTestRunner=..
stdout Time: 0.07
stdout OK (2 tests)
stdout INSTRUMENTATION_CODE: -1
But, I get the following in the Console:Launching instrumentation android.test. Instrumentation TestRunner on device emulator-5554 Collecting test information Test run failed: No test results I have tried a variety of different things, messing with the basic TestCase class, or the TestSuite class, or a variety of other options. I tried to just go for the most trivial example because I'm really still trying to learn how this works.Whatever I try, I see this error.
I'm working on a school project and I'm researching testing possibilities for Android applications. On this page: http: // developer . android . com/ resources / tutorials /testing /hello android. Google writes about a unit test. Is this really a unit test? A Unit test will not integrate all classes and will not test in his context. So my opinion is it is not a Unit Test but an Integration Test.
View 7 Replies View RelatedSony "Honami" camera app has been ported to Sony Xperia Z, ZL, and Tablet Z any chance that we can get this for all 4.2.2 devices?
View 1 Replies View Relatedwhy CheckBox is always null.
<CheckBox id="@+id/checkbox" android:layout_width="wrap_content" android:layout_height="wrap_content" />
code file-
package com.reblogr.reblogrclient;
public class Test extends Activity { /** Called when the activity is first created. */
public CheckBox checkbox;
@Override public void onCreate(Bundle savedInstanceState) { ....................
I am unable to integrate Junit with Android. I am using Junit 3, I have also tried Junit4.
package* com.android.test;
import* com.android.MyActivity;
import* android.app.Activity; *
import* android.test.ActivityInstrumentationTestCase2;
public* *class* TestMyView *extends *
ActivityInstrumentationTestCase2<MyActivity> {
Activity myActivity ;
*public* TestMyView(String pkg, Class<MyActivity> activityClass) {
*super*(pkg, activityClass);
myActivity = getActivity() ;
i'm trying to use my custom kernel on avd, when i launch
Code:
./emulator -avd sgsp40 -kernel /home/rmbq/zImage -show-kernel -verbose
the output is:
Code:
emulator: found SDK root at /home/rmbq/android-sdk-linux
emulator: Android virtual device file at: /home/rmbq/.android/avd/sgsp40.ini
emulator: virtual device content at /home/rmbq/.android/avd/sgsp40.avd
emulator: virtual device config file: /home/rmbq/.android/avd/sgsp40.avd/config.ini
emulator: using core hw config path: /home/rmbq/.android/avd/sgsp40.avd/hardware-qemu.ini
emulator: Found AVD target API level: 15
emulator: found skin 'WVGA800' in directory: /home/rmbq/android-sdk-linux/platforms/android-15/skins
emulator: autoconfig: -skin WVGA800
[code]....
there is this line:
Code:
emulator: Could not open file: (null)/system/build.prop: No such file or directory
which appear only when i use a custom kernel.
I have a Samsung Galaxy S running CyanogenMod 9.I want to test if my 3g is actually working or not. I used to use the 3G internet on the phone until I changed plan without mobile internet and now I've changed back. The problem is there is no 3G connection now.
I've been onto my network's forums and followed their instructions for setting up APN's etc. and the settings are perfect (even though I never changed them since the last time it worked).So my question is that is there some way to test if your 3G hardware is actually functioning?
I just ported the 2.1 gallery over to my moto droid (which is awesome btw). But now it shows that I have 2 galleries installed when i open my launcher.I just cant figure out how to delete the 2.0.1 version.When I go to Settings>Applications>Manage Applications, all that is there is the 2.1 version, even after I filter to "all".
View 3 Replies View Related