General :: Test If 3G Is Broken

May 6, 2013

I have a Samsung Galaxy S running CyanogenMod 9.I want to test if my 3g is actually working or not. I used to use the 3G internet on the phone until I changed plan without mobile internet and now I've changed back. The problem is there is no 3G connection now.

I've been onto my network's forums and followed their instructions for setting up APN's etc. and the settings are perfect (even though I never changed them since the last time it worked).So my question is that is there some way to test if your 3G hardware is actually functioning?

General :: Test if 3G is broken


Android :: How To Transfer Test Fixture File To Device From Unit Test Application?

Sep 24, 2010

I'm writing an Android JUnit test and want to copy/reset a test fixture file (it's an SQLite database file.) If I were within the main application, I know I could just place the file in the assets directory and use getResources().getAssets().open(sourceFile).However, this API appears to be unavailable from the ActivityInstrumentationTestCase2 class.Is there an easy way to copy a file over from the testing PC, or should I just keep a fresh copy of a test fixture on the device and copy it over a temporary file?

View 2 Replies View Related

Motorola Droid X :: Touchscreen Test - Drawing Lines Test

Jul 15, 2010

One more video about the fancy touchscreen of the Droid X. This one has happier results! Check it out at the link below.Droid X Touchscreen Test See you later. you'll know why this post is short when you read the blog. running downstairs!

View 5 Replies View Related

Android :: Error When Unit Test With Activity Instrumentation Test Cas­e 2?

Aug 23, 2009

I am using ActivityInstrumentationTestCase2 to do some test for an activity. I get a button in the setUp() method like this: protected void setUp() throws Exception {super.setUp(); act = getActivity(); btn = Button)act.find ViewById ( R.id.bike_button ); // this button has been defined in layout} Then I use this button to perform a click in a test method like this: public void testBikeButton(){ //click the bike button btn.performClick();}

View 7 Replies View Related

Missing Target Class To Test In Test Application?

Nov 10, 2011

I have a project (that compiles and runs in the emulator.) I have a test project that tests part of this project. This test project also compiles with no problems, but when I try to run (test) it in the emulator, I get a NoClassDefFoundError exception on one of the classes my test class tests (I hope that made sense!) when it starts to run in the emulator. This is coming out of the adb log. I looked in the bin directory (of the test project) for the missing class, but could not find it... Should it be there? I found no reference (apk, etc) of the project I am trying to test either in the test projects bin directory. How does the test project get the classes it needs to test against (in the classpath, I assume.) How do the tested classes get moved to the emulator? I did try running the app before testing, so I know it is installed and runs correctly. BTW, I am using netbeans with the nbandroid plugin.

View 1 Replies View Related

Android :: Getting Test Run Failed No Test Results?

Aug 11, 2010

I have never used JUnit before, and now I'm trying to set it up on an Android project.My project under test is fairly complex, including some JNI, but my test project, at the moment, is completely trivial. I have found many examples (that look totally different) online of how to make a test project, but it seems that no matter which one I follow, I get the same results.Here's my JUnit project code:package com.mycompany.myproject.test;
import android.test.AndroidTestCase;public class SimpleTestCaseExample extends Android TestCase {public void test_testOne() {fail("Just Always Fail");When I run, I see the following in Logcat:
stdout INSTRUMENTATION_STATUS: numtests=2
stdout INSTRUMENTATION_STATUS: test=test_testOne
stdout INSTRUMENTATION_STATUS_CODE: 0
stdout INSTRUMENTATION_STATUS: id=InstrumentationTestRunner
stdout INSTRUMENTATION_STATUS: current=2
stdout INSTRUMENTATION_STATUS: class=com.mycompany.myproject.test.SimpleTestCaseExample
stdout INSTRUMENTATION_STATUS: stream=
stdout INSTRUMENTATION_STATUS: numtests=2
stdout INSTRUMENTATION_STATUS: test=testAndroidTestCaseSetupProperly
stdout INSTRUMENTATION_STATUS_CODE: 1
stdout INSTRUMENTATION_STATUS: id=InstrumentationTestRunner
stdout INSTRUMENTATION_STATUS: current=2
stdout INSTRUMENTATION_STATUS: class=com.mycompany.myproject.test.SimpleTestCaseExample
stdout INSTRUMENTATION_STATUS: stream=.
stdout INSTRUMENTATION_STATUS: numtests=2
stdout INSTRUMENTATION_STATUS: test=testAndroidTestCaseSetupProperly
stdout INSTRUMENTATION_STATUS_CODE: 0
stdout INSTRUMENTATION_RESULT: stream=
stdout Test results for InstrumentationTestRunner=..
stdout Time: 0.07
stdout OK (2 tests)
stdout INSTRUMENTATION_CODE: -1
But, I get the following in the Console:Launching instrumentation android.test. Instrumentation TestRunner on device emulator-5554 Collecting test information Test run failed: No test results I have tried a variety of different things, messing with the basic TestCase class, or the TestSuite class, or a variety of other options. I tried to just go for the most trivial example because I'm really still trying to learn how this works.Whatever I try, I see this error.

View 1 Replies View Related

Android :: Is It Unit Test Or An Integration Test?

Nov 9, 2010

I'm working on a school project and I'm researching testing possibilities for Android applications. On this page: http: // developer . android . com/ resources / tutorials /testing /hello android. Google writes about a unit test. Is this really a unit test? A Unit test will not integrate all classes and will not test in his context. So my opinion is it is not a Unit Test but an Integration Test.

View 7 Replies View Related

General :: Images Broken In Tapatalk App?

Oct 27, 2013

Having issue with tapatalk app? It's very annoying that most images are not showing up. I'm running latest tapatalk from play store.

View 1 Replies View Related

General :: Removing Broken Application?

Mar 23, 2012

I have a problem with some applications that simply disappeared. Some them did it after I moved them to SD card. I think (I'm not absolutely sure about it) that some of those "disappeared" applications were not moved to SD card.

The problem is, that if I try to install the application again, system tells me that it is already installed. If I choose to install it again (upgrade the app), the installation fails.

The problem is that I can't remove these applications because I don't see them listed in installed apps. I will have to remove the applications manually, but I don't know how to do it. I have root access, so I should be able to do it.

View 2 Replies View Related

General :: Chainfire 3D Have Broken GoClever Tab R83

Dec 25, 2012

So when I installed Chainfire 3D driver. After that my tab stuck on kernel.

My tab is GoClever Tab r83.

View 9 Replies View Related

General :: Get Contacts From Broken Phone?

Nov 12, 2013

Some contacts for whatever reason werent saved my girlfriends galaxy s4 screen broke the phone turns on but can not see anything on the screen

is there anyway to get contacts off this phone?

View 1 Replies View Related

General :: PC Won't Recognize Droid After Broken Screen

Feb 28, 2014

I broke the screen on my droid mini. I bought a replacement digitizer/screen combo off ebay that doesn't seem to be working even though installation is correct. I can power on the phone, but it's really weird. There's no display and it just vibrates once. About every minute it vibrates 1 time again.

Secondly, my PC won't recognize the phone now. I was going to try to transfer my photos to the PC so I could call insurance as a last resort. I have around 800 photos on there that I want to get off. NOTE, MY SCREEN DOESN'T WORK so I can't change modes on the phone.

I'm temporarily using an old phone, at least need getting the photos off the phone.

View 1 Replies View Related

General :: Transferring Photos With Broken Digitizer?

Oct 29, 2013

I have a lg lucid4g and i need transferring the photos to my computer but I'm having a hard time because my phone does not respond to my touch im guessing its the digitizer.Is there anyway i can this without having to buy a new digitizer?I tried a couple of software such as "android recovery, mobile trans and a few others but with no luck.

View 1 Replies View Related

General :: How To Power Down Nexus 7 (1st Gen) That Has Broken Digitizer

Nov 13, 2013

I purchased a replacement digitizer for my broken Nexus 7 (first generation). Now, the *first* step of the repair process is to power-off the Nexus 7...

BUT It's BROKEN! I cannot press on 'power off' option when holding the power button for 10 seconds - that resets the unit.

How am I supposed to power it down?

View 1 Replies View Related

General :: Android 2.2 - Recovering SMS From Broken Phone?

Oct 24, 2012

My Samsung Intercept, running Android 2.2 I think (whatever the most recent VM update was), got soaked. I've tried the trick where you let it sit in rice for a few days to soak up the moisture, but the touchscreen is shot. The phone works fine except that I can't unlock the screen since the touch functionality just isn't working, which means I can't do anything with the phone...

Is there a way to recover my text messages by connecting to a computer? I'm not sure if I can even activate the USB functionality without the touchscreen working. I've been using Handcent for my texts, perhaps by some miracle is saves to the SD card?

If all else fails, I can replace the touchscreen myself. Where is a reputable source for a replacement for it?

View 7 Replies View Related

General :: Factory Reset With Broken Screen

Jan 6, 2011

I broke the screen of my Nexus1 and I'd like to send it to repair. However, I don't want to send it while my accounts are enabled. So, I need to do a factory reset. how to do it without having any visibility into what's going on on the display?

View 5 Replies View Related

General :: Broken Text-to-speech Engine?

Jan 3, 2013

Whenever I try to access my text-to-speech settings, I always get the error: "The application Settings (process com.android.settings) has stopped unexpectedly. Please try again." Not sure how to fix this. I've been trying to use utter! and Assistant, but neither give me voice feedback, and utter! tells me that the text-to-speech engine initialization failed. how to fix and/or rebuild the tts engine? I don't really want to do a factory reset or reinstall my ROM. Also, please note that the ROM is not the problem, I've already researched this. Also note that I have Google Voice and Voice Search both installed, and both work just fine. I can input commands vocally, but the text-to-speech issue does not funcion.

View 1 Replies View Related

General :: Transfer Contact From Broken HTC Sensation?

Jan 11, 2013

my htc sensation screen is all blind after a drop in to water. now i want to transfer contacts from the phone to my pc. there is no display . the phone is working but the display.

View 2 Replies View Related

General :: Broken Out Revo 2.0.1 Patch Instructions?

May 15, 2013

How do Install the 2.0.1 patch? Do I use CMR?

VS910 4G

View 1 Replies View Related

General :: Why ROMS Get Broken When Uninstall Bloatware

Aug 7, 2013

Why do ROMS get broken and phones not startup when delete bloatware that we got preinstalled on the phone?

case in point - my friend recently rooted his phone.. the first thing he did was use Titanium Backup to delete some of the preinstalled apps that came with his phone. That broke his phone and he cudnt boot it! (later he got it fixed by flashing the stock ROM again) But why does this sort of thing happen???

View 3 Replies View Related

General :: Stuck In CWM And Volume Button Is Broken?

Sep 28, 2013

i got a samsung galaxy s2 mini and i got it rooted it all worked fine , but yesterday for some reason it booted in CWM recovery and i cant get out of it my volume down button is broken .

my question is ; is there a other way to boot it normal?

View 1 Replies View Related

General :: Remap Broken Power Button?

May 7, 2014

I just managed to remap my broken power button to my volume up button, so I am able to lock/unlock the screen. The problem is that it's still not possible to turn on the phone with the volumen button (shutdown/run out of battery). I changed the gpio-keys.kl and Generic.kl file for remapping.

View 2 Replies View Related

General :: WiFi Tether Completely Broken

Aug 24, 2013

I have a droidX with liquid ICS 1.62,
android version 4.0.4,
and kernel version 2.6.32.9-g34b306d

I have tried every possible method i have found to get wifi tethering working, its to give my nexus 7 wifi on the train. I'm able to tether with bluetooth, but because there's no wifi connection various apps dont "see" the internet and ignore it.

So i need wifi tethering. BUT IT WONT FREAKIN WORK. More specifically, no matter what i try, nothing can see the wifi tethering signal of my phone, its as if nothing is there at all.

It'd tried; Foxfi, PDAnet, wifi tether for root users, barnacle tether...

View 3 Replies View Related

Android :: CheckBox Test - (CheckBox) FindViewById (R.id.test) - Returns Null

Mar 17, 2009

why CheckBox is always null.

<CheckBox id="@+id/checkbox" android:layout_width="wrap_content" android:layout_height="wrap_content" />
code file-
package com.reblogr.reblogrclient;
public class Test extends Activity { /** Called when the activity is first created. */
public CheckBox checkbox;
@Override public void onCreate(Bundle savedInstanceState) { ....................

View 5 Replies View Related

Android :: Android And Junit Reports Test Run Failed - No Test Results

Jul 16, 2010

I am unable to integrate Junit with Android. I am using Junit 3, I have also tried Junit4.
package* com.android.test;
import* com.android.MyActivity;
import* android.app.Activity; *
import* android.test.ActivityInstrumentationTestCase2;
public* *class* TestMyView *extends *
ActivityInstrumentationTestCase2<MyActivity> {
Activity myActivity ;
*public* TestMyView(String pkg, Class<MyActivity> activityClass) {
*super*(pkg, activityClass);
myActivity = getActivity() ;

View 3 Replies View Related

General :: Recovering Data From Phone With Broken Touchscreen

Mar 20, 2013

My HT Desire HD touchscreen died (at least partly) last week. I can no longer use anything in a column about a centimetre wide that runs the whole right side of the screen - which includes the Enter button. So I can't actually login to the phone

I've bought a new phone (Sony Xperia Z) and got my sim copied and switched the SD card from the Desire to the Sony. However, there is still stuff on the phone. I've realised that at least some of my data was on the onboard memory and I'd like to get it back. So basically I'm looking for ways to get the data back.

I can't plug the phone in and pull data off because I need to be able to login to switch it from charge only to USB drive. Maybe there's a way to force this?

I read an interesting post on hooking a USB keyboard to android and it should "just work" (How To Connect a USB Keyboard To Your Android Phone). However, I don't have the adapter to connect it, and the Desire ran an older version of android with Sense on top, so it may "just not work".

View 4 Replies View Related

General :: Can Wipe Memory Of Phone With Broken Display

Apr 19, 2012

My SGSII(AT&T)'s screen stopped working so they're sending me a new (or refurbished) one and then I have to send them mine. So is there any way to wipe the memory or factory reset the device (which is rooted but still has the stock rom) without the use of the screen? Also, when I plug it into my computer it doesn't appear in Computer (although the computer does know it's been plugged in by the sound it makes, maybe it's set to Charge Only even though I always had it set to data transfer).

How do you wipe a galaxy s 4g with broken screen.

View 4 Replies View Related

General :: App Data Backup From Phone With Broken Screen

Jun 4, 2014

I broke the screen/digitizer on my phone the other night. I got a new replacement phone through my mobile insurance. I was able to create a backup of my old phone through Kies since it's only the screen that won't work. However, upon further research, I'm seeing that Kies does not back up apps or app data. It says it does, when I selected everything while I was backing up but it won't let me when I try to restore it to the new device. It will only let me restore the contacts, pics, music etc.. which I already have on my micro SD card.

I've seen that people use helium backup but I am unable to do anything on my old device other than plugging it into a computer. I can't install helium on the old phone. Will I be able to backup the broken phone just with Helium Desktop?

View 5 Replies View Related

General :: Droid Bionic Broken Camera Lens

Dec 5, 2011

I am having a bit of an issue with my bonic. I noticed today that my lens on my camera is broken and so now my camera will not focus. What I'm wondering is where can I buy a replacement? Because I really don't want to spend $100 to get a new one from verizon when this is something I can probably fix myself.

View 7 Replies View Related

General :: Galaxy S4 - Get Contacts From Broken Screen Phone?

Nov 12, 2013

Some contacts for whatever reason werent saved my girlfriends galaxy s4 screen broke the phone turns on but can not see anything on the screen. Is there anyway to get contacts off this phone?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved