General :: How To Fix Failed Mount /data
Aug 25, 2013After repartition tool my storage encrypt then when wiping ths is my error.I'm wiping through recovery failed to mount /data Mount /data error
View 1 RepliesAfter repartition tool my storage encrypt then when wiping ths is my error.I'm wiping through recovery failed to mount /data Mount /data error
View 1 RepliesAfter using Odin to update firmware on my Galaxy Player 5.0 (model g70cwy/xaa), I can no longer get it to start. I get the Failed to mount /cache (no such file or directory) (see attached screenshot.
I tried the factory rest option, it does not seem like any of the options on this screen works.
i own a galaxy note n7000. i just update it to ics via kies. so i decide to root it. i read in some thread it said download the cwm.zip i do as the instruction but when i get into recovery mode and choose apply update from external storage the phone keep saying E:failed to mount /sdcard (No such file or directory).
View 5 Replies View RelatedSo I'm pretty new to rooting. On some themes or roms they require me to Mount System and Mount Data. I have clockwork recovery installed and when I select the option Mount System, it just acts like i didn't select anything. Is there something I'm doing wrong?
View 1 Replies View RelatedMy mom has an Asus TF300T running JB 4.2.1. She tried to root and flash OmniROM by herself and borked it somehow. Unfortunately, she didn't do any backup...
She entered the fastboot screen and there she selected wipe. Then she flashed openrecovery-twrp-2.6.3.0-tf300tg-JB.blob using fastboot.
It's operational, the OS loads up fine and she can use it, install apps etc.
I can get to the fastboot screen and from there to the TWRP no problem, but TWRP can't mount anything besides system. No dalvik partition, no data partition, not even the SD or external SD.Naturally, I can't flash another rom...
Tried executing "fix permissions" from the TWRP menu, it didn't work.
Downloaded the latest official Asus blob file TF300T-US_epad-10_6_1_27_5-UpdateLauncher.zip and flashed it using fastboot, hoping it will restore the missing partitions but it didn't make any difference.
Also tried CWM - same issue.
I had rooted my A13. Installed BusyBox. Then was trying to figure out how to flash CWM by first trying to figure out how to get into the stock recovery. Holding down power+volup and power+voldown didn't do anything. I think I had the USB and power both plugged in at the same time. Next thing I know, the tablet rebooted and appeared to have factory reset. But now every time it is turned off and turned back on it goes back to factory default.
Real problem: Turns out the OS is not mounting data which is why it appears like its factory reset.
What I have done: Installed CWM. The only way I can get to CWM is to choose factory reset from the OS and when it reboots, it goes into CWM. There's no other way for me to get into recovery, so at this point, I am hesitant to try and flash random ROMs. From CWM I can mount data and see that it should go to /dev/block/nande. With the OS booted back up, I can manually mount data and see all the files in ADB shell, But it doesn't affect the OS since it has already booted up. And if I reboot, it won't be mounted again.
So how do I make Android mount data on bootup? Or what to check to see why its not mounting data anymore? vold.fstab appears to only list SDCARD mounts.
My droid razr was installing an automatic update, made an error and then failed ultimately. It happened over night, so I wasn't even paying attention to it. This morning it was stuck with no service, no data, nothing. I tried turning it off and then back on, putting airplane mode on and then off. No luck. I then did a factory reset. Now it just says "please wait, this may take a few minutes." It does not change. I waited as long as the batter would stay charged. Still nothing.
I also tried re activating it on the verizon wireless website. No luck.
When the (HTC Desire) phone is powered up it is unable to mount the SD card, and I am unable to have it mounted from the "Settings > SD card & Storage" menu. Having said that, the micro SD card can be accessed from a computer (when plugged in directly to the computer, i.e. no issue with the card), and moreover, when I am in the recovery mode, I can have it mounted and browse it. By the way, the card could be accessed from the phone until I downgraded the O/S, and managed to have it rooted.
When the phone is running normally, and connected to the USB port of a laptop, the laptop does recognize a device connected (can even do ADB), but I believe because the SD card is not mounted, the phone does not offer the option to make the card appear as a disk drive for computer access.
I am running the original (RUU, Telstra) Android 2.2 (2.26.841.2) on a HTC desire, after I had it "S-OFF'ed". After reloading the original 2.2, I had it rooted.
The micro SD card is a 2GB one, with approx 1.5GB formatted as FAT16 (contains typical file and photos), and 0.5 GB as EXT3 (contains nothing at the moment).
HBoot: 6.93.1002
S-Off ( Revolutionary)
Recovery mode: ClockworkMod v5.0.2.0 (I manually loaded it)
I have searched online for solutions, and have not been able to have it fixed. Others seem to have different issues to that of mine. Usually, they cannot mount the SD-card at all (not even from recovery), or their SD card just needed to be reformatted. I think I have indicated that these do not appear to be relevant to my issue at all. I have also tried "Fastboot oem enableqxdm 0", and it made no difference.
Is there a way to mount the system root to pc as a disk mount cause I want to recovery data from it that I wiped.
View 6 Replies View RelatedI bought a used working EVO. I activated it and I noticed that when I turn it on, The data connection does not start. When I go into Settings/Wireless & networks, the Monile Network says Connection failed. If I turn it off and back on, it connects fine. Is there a setting that I am missing that is causing this problem? I rooted it before activating so I don't know if I should take it back to stock. But I would prefer not to.
View 1 Replies View RelatedWhen i added a media file to the sdcard an update in the MediaProvider database is not happening. When i bootup the emulator it happens. Is this the expected behaviour?
View 2 Replies View RelatedIs it possible to mount an external USB thumb drive to access its data from a file browser on the phone? I tried plugging one of my USB drives into a USB-to-microUSB adapter and plugging that into the phone, but it didn't mount anywhere.
View 10 Replies View RelatedI would like advice from those with 2.2 on Orange. I've had my Desire for 2 months now and love it-apart from one thing-the damned Internet connection. Quite often, with a strong 3G+ (HSDPA) signal, my internet connection fails to load data. Then, a few minutes later, in the same location, it works perfectly. I know for a fact that this is not a network only problem. The reason I know this is because I previously used the exact same SIM in my iphone for 6 months in the very same locations and it always worked perfectly.
Therefore, my strong suspicion is that the problem is a result of the combination of the Orange branding on a Desire and the network itself. I'm sure I read of a couple of posters here who had the very same problems and when they moved to 2.2 the problem disappeared. Can anyone confirm? I've been waiting patiently for the Orange update to 2.2 but am getting fed up and I'm concerned that the Orange bloatware may still cause an issue after this. Hence, I'm considering a debrand and update myself.
Can any body tell me why this is happening..Whenever i try to open a website located in the intranet server,(or even a local machine with tomcat web server) i get this message.Data connectivity problem..Server failed to communicate.Please try again later The browser works fine for all other websites i tried google,youtube,yahoo,etc all of them worked fine.Do i need to set any other value in the emulator? Any one else got the same problem?
View 2 Replies View RelatedMy phone indicated that the SD card was damaged. I had to re-format. I lost all my data and music I downloaded from Amazon. I have been able to use the SD card after formatting but am concerned that it may crap out again. I am going to try to get a new one from Verizon, however it may be better to buy a new one from a 3rd party.
View 1 Replies View RelatedI recently purchased an 8gb sdmicro card for my samsung moment, which i put in my phone, then got home tried to hook it up to my pc with the usb cable...nothning happened, but i got this error warning or so talking about usb malfunction or something, heres a screen shot of what i saw popped up. do i need to install new usb drivers for the phone? also i can hear the pc making that dun dun,... dun dun sound when u plug in a usb device, but it keeps doing it over and over... while the phones charing thru it.
View 4 Replies View RelatedTrying to follow instructions to sync the music on my Captivate with i-tunes on my PC. Using the "Know Your Cell" website instructions, but I can't get the option to mount my device in order to write from the I-Tunes agent to the device.
View 2 Replies View Relatedvdc cryptfs enablecrypto/changepw exists.Where is vdc cryptfs mount? I.e., how can I mount the encrypted /data partition from a shell (ultimately via adb shell in recovery)?
View 5 Replies View RelatedI have not long bought my first tablet - its an ly-f1 / alldro speed etc clone. It came with android 4.0.4 and was already rooted. Play store access isn't bad for standard, i have found most things i have looked for, although some say device is not compatible - for example the speedtest.net app and itv player. There's some it cant find either like grand theft auto 3 for example.
The performance for the tablet is ok but i understand a custom rom could improve it and also give better play store access/compatibility. So i started looking at what roms were available, i found troys CM9 and CM10, so wanted to try CM9 first. This is where i started running into problems. Mainly finding everything i needed - CMW, ADB drivers etc.. oh and mounting the sdcard! as below..
I managed to find CMW 6 for the ly-f1, which i copied across onto the tablet and ran using a shell to install it. I copied across the CM9, compatibility and gapps zip files to the internal sdcard. So far so good, however.....
when i rebooted into CMW and went to "install zip from sdcard" then "choose zip from internal sdcard" it comes up saying "cant mount /emmc/"
If i try "choose zip from sdcard" rather than internal sdcard, it says "cant mount /sdcard" - to be expected as i dont have one in it! but i cant figure out why the internal one doesn't work.
When the tablet is on i can get into the internal sdcard fine and if i connect it to the pc i can see it fine. I've looked around google and the forums and tried a few various things with no joy - for example i tried copying everything off the internal sdcard and formatting it - done this through the android setttings and through windows - both fat32 and ntfs just to see, none made any difference.
I then thought i'd try find another version of CMW in case it was that, i found a version 5 which is when i required the ADB drivers as it was a different method for installing it - got it installed and it rebooted into CMW but i had the exact same problem, still cant mount it, so i am still unable to flash to a new rom.
Is there another method i can use to flash the device? I know theres livesuite but not sure if this is suitable for CM9 since theres 3 zips that need installed? i cant understand why it cant mount the internal sdcard.
I kind of wipped the phone memory, including system, I need to copy the firmware to the SD-Card to flash it, but can't seem to find a custom recovery that has a working USB mount...
Tried Team Win Recovery Project 2.1.2 (TWRP), and the new version of ClockworkMod..how do I get the firmware on the phone SD-Card?
PS: can boot in bootoader and recovery, thats about it, if I bootr normal all I see is the HTC logo...
I was able to connect my Samsung Galaxy S4 using Android File Transfer to my Mac OSX 10.8.3. Now today I can't get it to work. Any tips? I also tried to install Samsung Kies and neither can see my phone. When I connect to the USB on the phone it says "Connected as a Camera". I don't remember that before. How can I have it connect as a mass storage device?
View 3 Replies View RelatedIt is a CRAIG tablet and i keep hooking usb to computer end hooked up to tablet but it wont mount how can i do that?
View 1 Replies View RelatedAfter I flashed a couple roms I couldn't boot jelly bean anymore and I noticed the error in recovery: E: Cant Mount /efs, when installing. But I could still boot ICS but not jellybean. I still had my IMEI and could make calls but could not boot jelly bean because it couldn't mount.
Sometimes when installing a rom something goes wrong and it changes the partition type of /efs making it unable to be mounted. The partition is usually from ext4 to swap.Most likely this will work on your phone but if it doesn't and your phone stops working I am not responsible.
If your like me and you couldn't get jelly bean to work then flash your device back to ics and it should boot. Once your booted inside of ics we can start the process.
Pre-Setup:
1. Be rooted and have a custom recovery installed.
2. Be on Ics and it boots.
3. Your need to have a Jelly Bean rom like Cyanogenmod on your sdcard.
4. Have adb installed on your pc and usb debugging on in your phone/tab.
Now that that's done its time to start.
Part One:
1. Boot into recovery.
2. We need to find the efs block location.
3. Go to mounts and select efs
4. It should say unable to mount
5. Go to advance and make a recovery.log
6. Put that file on your computer and open it.
7. Look through the file and you should fine something like this around the beginning of the file:
E:Unable to mount '/efs'..Actual block device: '/dev/block/mmcblk0p3', current file system: 'swap'..My location is /dev/block/mmcblk0p3 But yours could be different! Most likely the difference will be instead of it ending with a 3 it will be a different number. I will be saying /dev/block/mmcblk0p3 if yours is different just change it to your location.
*WARNING* Sometimes when you copy paste into adb it will auto run the command without you pressing enter. If your location is different then mine and you copy past and it auto runs it could be BAD so to be careful if you want to copy past. Copy the command paste it into Google make the change and copy that and paste into adb
Part Two:
1. When your inside recovery connect your phone to your computer and get into a adb shell. (Sometimes it will take awhile for adb to recognize your device so be patient.)
2. Once you have adb access its time to start entering the commands.(Again my location may be different the yours! Most likely the difference will be instead of it ending with a 3 it will be a different number.
Part Three Inside ADB:
1. su
2. dd if=/dev/block/mmcblk0p3 of=/sdcard/efs.img
3. mke2fs /dev/block/mmcblk0p3
4. mkdir /efs
5. mount -t ext4 /dev/block/mmcblk0p3 /efs
DONT REBOOT PHONE
Part Four On Your Phone:
1. Now /efs is mounted don't unmount it
2. Do a factory reset
3. Install your Jelly Bean rom
4. It should install without any errors
5. Boot your phone
6. If everything went well it should boot.
7. After it boots your signal notification most likely will be gray and internet or calls may not work
8. To fix just install gapps and it will be fixed
There you have it if everything went correctly your efs should be working good and you should be able to go back and do your normal rom flashing.
If jelly bean boots but you don't have phone do this:
1. Go back into recovery and get adb access.
2. su
3. mke2fs /dev/block/mmcblk0p3
4. mkdir /efs
5. mount -t ext4 /dev/block/mmcblk0p3 /efs
6. dd if=/sdcard/efs.img of=/dev/block/mmcblk0p3 bs=4096
I have rooted my xolo a500s IPS using farmaroot but when I tried to mount system r/w for pushing some apps and removing some on system partition but it is not mounting because of that i cant make changes on system.how can I mount system partition
View 9 Replies View RelatedI have a problem on my device, every time I rerun Link2sd always to Re-Mount my 2nd SD but if I choose OK (not Restart) my 2nd SD mounted, and when I restart my device and running link2sd again, this application take it back to re-Mount again. I want to ask for that problem. What should I do to make that application become automount.
Note:
1. I use Samsung Galaxy Grand, OS JB4.2
2. I have been format my 2nd SD in ext2,ext3,ext4,fat32 and Now, I use ext4 but no change.
I'm using an EVO LTE, but this question should apply on using Android device that has internal storage and an external card slot.
I'm trying to use my EVO LTE as my sole media player (specifically, the internal storage). Connecting it to the PC and getting the files onto it are no big deal (of course I do need to use MTP, which I hate). Now on to the problem:
I'd like to be able to use the device connected to my car's USB port. Being able to pick through my media using the car stereo controls is a big plus for me, and worked great when I had an iPod (which I don't anymore, not getting into that).
Of course, the car stereo's USB connection doesn't support MTP, only Mass Storage, at least as far as I can tell (It's a stock stereo in a Fit). I get a compatibility type of error currently when I try to connect my phone using the 'HTC Sync Manager' USB option in the phone (which mounts the device using MTP). The 'Disk Drive' option of course only mounts the external card.
what I'd love to be able to do is mount the internal storage via USB Mass Storage. I'm not sure if this is currently doable, but my forum-scouring to date leads me to believe that it is not.
After putting a lot of thought into how to best backup my photos and videos while on the move, I decided that a tablet would be the best solution.
Now, I will shoot quite a lot of HD video in the near future, which means that even a 64GB tablet won't be large enough. Solution: Backup on a second SD-Card!
So right now I am waiting for the Acer A510 (with support for USB-OTG).
Can a Dual-SD-Reader like the one linked below will be working on Android, so both SD cards can be mounted at the same time?
[URL] .....
I know that I could also go SD->Tablet->Backup SD, but direct copy would make life much easier.
my verizon galaxy tab 7 (sch-1800) doesn't boot, it freezes on samsung splash. I already restored the stock rom, but it doesn't change anything. if i try to restore default with recovery mode, it says E:failed to mount cache.
View 4 Replies View RelatedI followed the instruction at [URL]... to disable the internal usb drive of Lenovo A820. But now my sd-card is not mounted anymore. What can I do?
View 3 Replies View Relatedafter I failed trying to install jaggydzire/blackjack, my explorer can't mount my sd card anymore, i can get to recovery but i can't install any ROM, tried the fastboot oem enableqxdm 0 but nothing happened..my sd card is working, i formatted it using a pc, but still i can't mount it in my phone...what else should i do?
View 4 Replies View Related