after I failed trying to install jaggydzire/blackjack, my explorer can't mount my sd card anymore, i can get to recovery but i can't install any ROM, tried the fastboot oem enableqxdm 0 but nothing happened..my sd card is working, i formatted it using a pc, but still i can't mount it in my phone...what else should i do?
View 4 Replies
When the (HTC Desire) phone is powered up it is unable to mount the SD card, and I am unable to have it mounted from the "Settings > SD card & Storage" menu. Having said that, the micro SD card can be accessed from a computer (when plugged in directly to the computer, i.e. no issue with the card), and moreover, when I am in the recovery mode, I can have it mounted and browse it. By the way, the card could be accessed from the phone until I downgraded the O/S, and managed to have it rooted.
When the phone is running normally, and connected to the USB port of a laptop, the laptop does recognize a device connected (can even do ADB), but I believe because the SD card is not mounted, the phone does not offer the option to make the card appear as a disk drive for computer access.
I am running the original (RUU, Telstra) Android 2.2 (2.26.841.2) on a HTC desire, after I had it "S-OFF'ed". After reloading the original 2.2, I had it rooted.
The micro SD card is a 2GB one, with approx 1.5GB formatted as FAT16 (contains typical file and photos), and 0.5 GB as EXT3 (contains nothing at the moment).
HBoot: 6.93.1002
S-Off ( Revolutionary)
Recovery mode: ClockworkMod v5.0.2.0 (I manually loaded it)
I have searched online for solutions, and have not been able to have it fixed. Others seem to have different issues to that of mine. Usually, they cannot mount the SD-card at all (not even from recovery), or their SD card just needed to be reformatted. I think I have indicated that these do not appear to be relevant to my issue at all. I have also tried "Fastboot oem enableqxdm 0", and it made no difference.
I am using the application LINK2SD for transferring my applications to SD card. But what I see is, there is some memory still used from the phone memory even after moving that application.
So, I want to know what can be the reason for that and is there any way to move that data part to SD card?
this is not making any sense in rooting the device as still my phone memory gets low.
I was using 4gb class 4 earlier , I bought 16gb class 6. At first empty ad card was working hood then when I used up a few gb and re inserted the sd card the problem began After 5-10 seconds of mounting sd it goes out and phone shows that sd is removed unexpectedly, sometimes my phone hangs in this cycle and reboots(starts again from bootanimation part) This sd works fine with other things like my Sony cybershot w-x50
View 9 Replies View RelatedSince I have moved dalvik cache to sd ext when I remove sd card my explorer/pico closes unexpectedly I know why this happens but I want to ask that if due to some reasons sd card stops working so then can I acces the recovery mode ? Because the internal mem is on sd if sd stops working so I have to flash Rom again.if this happens that sd card stops working so then can I access recovery mode ?
View 1 Replies View RelatedI have not long bought my first tablet - its an ly-f1 / alldro speed etc clone. It came with android 4.0.4 and was already rooted. Play store access isn't bad for standard, i have found most things i have looked for, although some say device is not compatible - for example the speedtest.net app and itv player. There's some it cant find either like grand theft auto 3 for example.
The performance for the tablet is ok but i understand a custom rom could improve it and also give better play store access/compatibility. So i started looking at what roms were available, i found troys CM9 and CM10, so wanted to try CM9 first. This is where i started running into problems. Mainly finding everything i needed - CMW, ADB drivers etc.. oh and mounting the sdcard! as below..
I managed to find CMW 6 for the ly-f1, which i copied across onto the tablet and ran using a shell to install it. I copied across the CM9, compatibility and gapps zip files to the internal sdcard. So far so good, however.....
when i rebooted into CMW and went to "install zip from sdcard" then "choose zip from internal sdcard" it comes up saying "cant mount /emmc/"
If i try "choose zip from sdcard" rather than internal sdcard, it says "cant mount /sdcard" - to be expected as i dont have one in it! but i cant figure out why the internal one doesn't work.
When the tablet is on i can get into the internal sdcard fine and if i connect it to the pc i can see it fine. I've looked around google and the forums and tried a few various things with no joy - for example i tried copying everything off the internal sdcard and formatting it - done this through the android setttings and through windows - both fat32 and ntfs just to see, none made any difference.
I then thought i'd try find another version of CMW in case it was that, i found a version 5 which is when i required the ADB drivers as it was a different method for installing it - got it installed and it rebooted into CMW but i had the exact same problem, still cant mount it, so i am still unable to flash to a new rom.
Is there another method i can use to flash the device? I know theres livesuite but not sure if this is suitable for CM9 since theres 3 zips that need installed? i cant understand why it cant mount the internal sdcard.
I have tried a lot of custom Roms. I'm on Neat ROM Lite now. Not sure which ROM changed my file access permission settings to cause this problem but I'm not able to delete any files from my external memory card. I was able to delete when I was on stock rom. The other problem is for a few apps I get an error message which says can't install on usb/sd card. I have posted this in another thread some time back but got no response.
This is what my file permission looks like.
I am able to delete when my fone is connected to PC via USB. So I don't think it has anything to do with a faulty sd card.
I decided I wanted a fresh start on my phone so I backed up my pictures and formatted my SD card. I just used the default one in settings. After I did that, every time I press mount SD card, i get a notification that the SD card is safe to remove. I booted up in CWM and tried partitioning it and it says it worked, but I still can't mount and I get "Error mounting /sdcard!".
View 2 Replies View RelatedI've had an LG Vortex for probably about two years now. It's always worked fine up until about six months ago. It started saying it was full, so I'd delete a picture here and there but eventually it just stopped loading my picture gallery it was so full, and my sd card just stopped working completely. It said I needed to format it, so I took all of the pictures and put them on my computer and tried to format it, but It said it was damaged. Also, previously I didn't know that you had to mount and unmount it when taking it out so I don't know if that had anything to do with it. So anyway, I buy a new SD card, try to mount it. It says it's damaged. A little while later, I buy another card figuring it might just be that card was messed up. STILL SAYS IT'S A DAMAGED CARD. These are two brand new cards I tried, so I know it's something to do with my phone, but I don't understand.
View 5 Replies View Relatedandroid4.2.1..I mount my memory as emulated sdcard.while the first time it mount OK. I can acess sdcard rightly. I can not mount after reboot. error log: e/ dalvikvm: Cannot mountEmulatedStorage() Read-only file system.
I found it report the dir /storage/emulated/0 is Read-only file system.the config is just as follows:
mkdir /mnt/shell/emulated 0700 shell shell
mkdir /storage 0550 system sdcard_r
mkdir /storage/emulated 0555 root root
[code]....
What's the problem?Why it's not right after reboot?
Widget that dual mount you SD card to the computer and to the computer. My question is there a script that does this. How we can add to vold file or ramdisk.
So we don't need the widget but when you plug in your phone and you'll touch the mount button it mount on your pc but you can get to sd on phone too (or even auto mount to pc).
Decided to try the encryption feature , it took well over 30 minutes to finish but never prompted me to enter a password, upon rebooting it prompted me for a password... didn't know it so I decided to wipe phone to be able to boot. Phone can not mount internal SD card at all.
View 1 Replies View RelatedI rooted my phone and this morning I attempted flashing a ROM called ViperOneS that you can look at here --URL.... So in order to install it the OP wrote in the instructions to factory restore the phone which I did. When I cleared the cache and everything and went to install it TWRP said it failed so I just erased it. Then when I went to reboot it was stuck on the screen with the red writing so I rebooted it in Recovery and it said there was no OS installed. I looked for this problem online and found that if I mounted the phone to my computer I could copy and paste a new ROM for my phone which I eventually tried to do but for some reason it does not allow me to check off either of the boxes next to "Mount SD Card" or "Mount Internal." It does let me mark all the other boxes. what I should do so the computer recognizes the phone as a "Removable Disk" like it used to so I can just drag and drop a new OS into my phone and put this thing behind me already?
View 1 Replies View Relatedi tried this tutorial to mount my sdcard over wifi. i like to sync my music with clementine. not only copy paste. so i need to mount the sdcard. but when i tried the following command i got this msg.
Code:
roni@roni-Aspire-5738:~$ sudo mount -t cifs //192.168.1.2/sdcard/ /media/android -o user=roni,uid=roni,gid=roni,nounix,file_mode=0770,dir_mode=0770
mount: block device //192.168.1.2/sdcard/ is write-protected, mounting read-only
mount: cannot mount block device //192.168.1.2/sdcard/ read-only
I rooted my phone and this morning I attempted flashing a ROM called ViperOneS that you can look at here --> [URL].... So in order to install it the OP wrote in the instructions to factory restore the phone which I did. When I cleared the cache and everything and went to install it TWRP said it failed so I just erased it. Then when I went to reboot it was stuck on the screen with the red writing so I rebooted it in Recovery and it said there was no OS installed.
I looked for this problem online and found that if I mounted the phone to my computer I could copy and paste a new ROM for my phone which I eventually tried to do but for some reason it does not allow me to check off either of the boxes next to "Mount SD Card" or "Mount Internal." It does let me mark all the other boxes. What I should do so the computer recognizes the phone as a "Removable Disk" like it used to so I can just drag and drop a new OS into my phone and put this thing behind me already?
When I restore system From cwm and select advance restore
Receive a message saying "can't mount sdcard"
my tablet is lenovo a2107a-h 16gb
When I boot up my Nexus One, it takes <Sandlot>FOR-EVV-ERRR</Sandlot> to mount my SD card. I've got most of my apps on that card, so it's super annoying!
Like I've said, I've got a bunch of apps (40?) loaded on to this card, a few documents, 4 CDs... random stuff. I haven't formatted the card in a looong time... nor have I wiped the phone in a loooong time. I am a crackflasher - I flash a new ROM every day, but I VERY RARELY have issues, so that's why I haven't wiped in so long. I would be happy to just mount the SD manually through the terminal when I need it to.
The phone is a Nexus One. I'm running a CM7.1(or whatever it is) based ROM and kernel. The SD card is the 16gig one that came with the phone.
What's the terminal command to mount the SD card to the phone? So the ROM can access it?
I have a Huawei 8650. I had updated my phone to Android 4.4.2 and i still have root access and all that good stuff but when i try to give root access to something like Link2SD or Root Explorer it will only give it partial permissions. Link2SD wont mount my sd card partition and root explorer wont gain root access at all. Both apps have the error "char* ttyname(int)(3) is not implemented on Android char* ttyname(int)(3) is not implemented on Android mount: Invalid argument". Idk what this is or how to fix it. how to fix it so i can use my sd card partition and fix my wifi.
View 3 Replies View RelatedIs there a way to mount the system root to pc as a disk mount cause I want to recovery data from it that I wiped.
View 6 Replies View RelatedAfter powering on my phone this morning(I charge my phone off to bump charge my 2100 battery ) I tried to play a podcast on Google listen and noticed my phone said there was no SD card. I tried everything. Rebooted several times and I even booted into recovery. I got weird screen, triangle with an exclamation! So I rebooted back into current Rom(Ruby1.1). So I finally bit the bullet and decided to reformat the SD card (through the phone) and it still doesn't work! I don't have access to a computer but it looks like my SD card is toast. This card is a 8gig scan disk that came with my old BB Storm. Luckily the 2 gig SD that came with my incredible has a nandroid back-up, but its a 2.1 back-up. Not sure if it matters but I do have an extra backup. When I get a home I'll get another SD and do so backups. Just thought I le you guys know to tell everyone to make extra backups!
View 2 Replies View RelatedSo I somehow killed my 2GB SD card last week (accidentally unplugged from the laptop while it was writing data- wasn't recognized as existing by my phone or laptop after that) and just got a 4GB card today. I formatted it (FAT32) before trying anything, then copied my files back from my laptop onto the card and ran a new Titanium Backup batch thingie. Everything was fine, and I was going to go create a new backup file through Clockwork Mod so I could flash a new ROM on there and I get this message.
View 6 Replies View RelatedWhat are the advantages of root explorer over estrongs file explorer?
View 6 Replies View RelatedI rooted last night, DL LFY and LFY1100 kernel. I installed the kernel and then LFY itself. After trying to reboot it only gets to the custom boot screen and will not launch. After 15 minutes I pulled the battery and tried to launch in recovery mode to load my backup. Upon trying to do that it says cannot mount to SD card. I try again and same thing. After failing to mount it goes into the same custom launch screen for LFY but no OS comes up.
View 41 Replies View RelatedI am not able to mount my SDCARD using NPS. My phone does not has a CSC file and I understand that updates wont work. But everyone seems to be able to mount the SD card and copy files to it. I want to update to Galexo roms but not even able to mount my phone.I disabled the mass storage settings and enabled the debugging. I was able to flash the phone using Odin and also able install the recovery image from Galexo.
View 1 Replies View RelatedI just got a new 16gb class 10 sdcard yesterday. I formatted it, partitioned it w/ killertonez a2sd, and flashed Velocity .3 with Turbo4 and OC kernel. When my phone reboots, I get a notification that reads "SD card removed" and it will not load my ROM or anything. I can manually re-insert the card, but none of my data will load; and every time I reboot or power cycle my phone, I get the same error message. I didn't do anything out of the ordinary and I've wiped/reflashed a few times now. I know I am doing it correctly - is this just a card or phone issue? Is there a script to permanently mount the card?
View 4 Replies View RelatedYou know, I hate that feeling when you join a great forum, and having to ask for some sort of help in your first post. *sigh* Anyway, here goes.I just got my DX, and its pretty awesome. I love almost everything about the phone. The problem is that the SD card won't work, and I'm not sure if it's the card or the phone. On around the 5th day with the phone, I was listening to music with pandora, and decided that I wanted to play a little Super KO Boxing 2. However, the battery was really low at the time. Because of this, as soon as I opened the game and it started searching the SD card for the down loadable content, the phone ran out of battery and the screen froze. I had to turn power off. Later on when it was done charging, I turned the phone on again, only to be notified that the SD card was of an unsupported filetype. So I formatted it in the settings menu, but nothing happened. I clicked format again, and still nothing. Now, even when I click the "mount button", nothing happens. I have tried removing the card and turning the phone on an off. I don't actually own a pc card reader but would have no problems with buying one.
View 1 Replies View RelatedThis just started today, after having worked flawlessly up to this point. When i connect the Eris to my laptop via the USB. Select ' Mount as Disk Drive'. I receive an error from windows saying 'USB Device Not Recognized'. It lists it as an unknown device and will not mount the SD card. Ive tried restarting both the phone and computer to no availer.
View 2 Replies View RelatedI never connect my eris to the computer. However, I cannot save images from the backgrounds app because it says "Could not save the image. Please make sure SD card is inserted and mounted." I'm positive my SD card is mounted, so how can I fix this?
View 3 Replies View RelatedAnyone else having major problems with their SD cards running CM6?? I cannot use my SD card or mount it on my computer!
View 3 Replies View RelatedHow do you mount the micro sd card
View 4 Replies View Related