I just updated my wm 6.5 to android Gingerbread 2.3.7, but I have no internet 3G signal, what could be the problem?
On the same note:
1) How do I update the profile? I do not see an option anywhere in the settings.
2) How do you load a radio rom - I'm guessing this is something that is causing my internet issue.
View 2 Replies
Is it possible to install gingerbread on a java enabled touch screen device?
View 2 Replies View RelatedI have a Samsung Nexus S (Not the 4g version) I just picked up and the radio seems to not be functioning. No matter which sim card I insert into this thing the radio still comes up with zero bars I've switched the roms around a few times and I'm currently downgrading to the PeterAlfonso's Bugless Beast with the custom kernel in hopes that maybe flashing these two things may have a positive effect on my issue.
View 1 Replies View Relatedbluetooth, fm radio, playstore not working on new PAC rom for galaxy ace....... ?
View 1 Replies View RelatedI tried to install a custom ROM and i failed, so i had to flash a Stock ROM again. After i downloaded the packaged and flashed it using Odin. The touch is not working !
View 1 Replies View RelatedI am having Iball andi 4.5d quadro mobile. I got stock rom of my mobile from this website [URL]
I used SP flash tool but now touch not working
i got a brand new S3 In december 2013 , i dropped it an it broke ( both touch and LCD ) I got them replaced by a authorized service . It worked fine 2 months , Two days ago some problem appeared, Touch screen stopped working propperly , it worked only for short periods of time. Now if i press really hard on the right hand corner (Above the return arrow) it works Perfectly ( as long as i keep my finger there) but sometimes it works fine after reboot but in the end it stops (No signs of cracks or damage) , i had CM11. What i've done until now :
-Deleted CM11 and added 4.1.2
-Took it appart and checked the ribbon ( fine)
-Hard reset
- Dummy file generator
Everything works on it buttons ,Before the freezing screen flashes a bit .
So I did a water test on my Moto G the other day because it's supposed to be "water resistant." It survived the first day of the water test, but the next day, the touch screen isn't working.
View 5 Replies View RelatedI have flashed 2 different roms but both have same problem, after flashing the new roms touch has stop working on onda vi30 deluxe...Suggest me something through which i can restore my touch back.
View 1 Replies View RelatedI bought LG VU II (F200L) in perfectly working condition, it almost new. After installing LG PC suite and connecting it said new firmware update is available so I proceeded which was done successfully but since then touch screen is not working properly.
Usually it responds ok but main issue is back button is not working anymore, and sometimes when I press power button to unlock screen it responds very weird and not so responsive as well as sometimes doesnt responds or opens apps that I havent even clicked.
I tried to restore, emergency restore, LG Flash tools and used correct KDZ files to flash roms successfully but nothing seems to resolve this issue.
I have been using a trusty U8120 for a while now with Fresh Zodiac Fruit Rom. I was browsing on it last night and then next day the screen was just inoperable. Sometimes it would "take" some input, but it would understand something different (e.g. on a keypad, touch it in the middle "5" and it understands top right "3", but then again, "3" doesn't register either).
Here's the funny thing: it doesn't take any input whatsoever, but, if the screen is about to idle shut down and I touch it, it goes back on full light, meaning it understands the touch.. what the..?
I tried reinstalling the firmware but nothing happened.
My galaxy s2's screen has occasionally stopped responding, the os was still running and everything so it wasnt frozen, my touch screen just simply stopped working. Only way to fix it was to hit the back of the phone and do a battery reset. This issue started poping up more and more, and now it won't respond.
Model: GT-I9100M
No custom roms/kernels have ever been installed, has always run off the stock. Never been dropped or had water on it (I took very good care of it).
The nav bar at the bottom (back/search/options/menue) and hardware buttons all work. Everything above the screen no longer works.
What iv done: I've reset the phone, did a bettery pull for the night, fully charged it, looked at the board and checked all the connections (all good). Would flashing a custom rom/kernel be something to try next? Why would the bottom nav bar work but no the rest of the screen? Could it be locked somehow? If it is.. how would I unlock it?
I have flashed my x10a with flashtool and x10_2.3_aro_2.ftf firmware. But after the flashing is finished, my phone screen touch is not working. What can I do now? I am unable to install xrecovery to install another rom bcoz screen touch isn't working. So I can't install any custom ROM.
View 2 Replies View RelatedYesterday I was having fun trying out the secret codes (like *#*#4636#*#*) and tried out the touch screen code. Then clicked on update (firmware).
Then the touch was not working. I tried taking out battery and putting it back on. Tried factory reset after backing up data with Kies. Tried rooting the simplest way. Tried to flash using Odin with a recovery and pit file. Still nothing is working.
I'm on Fresh and the FM radio tuner has been removed. It's in the "Fresh-removed-apks-3" folder. I tried installing from HtcFMradio.apk using ES File Explorer and I keep getting "Application not installed". I copied and pasted it to the sdcard main folder and tried from there and get the same issue. I also tried File Manager and AppInstaller.
I found another .apk online and tried installing from that apk, now I get a force close every time I try to run it. I read somewhere that wiping the data using Settings > Applications > Manage Apps > All, etc then resetting it works, but Clear Data was grayed out. I wiped the data with Titanium and then reset but I'm still getting a force close...
I cant get the FM radio to work at all when I plug in headphones and turn it on all I hear is static no matter what station I goto. It would be real nice to get it working so I can use it while I'm walking. If I don't find a solution eventually I am going to take it into sprint and see if its defective and get and exchange for another Evo.
View 24 Replies View RelatedSo I just received my sprint Evo last night and the 4g radio wasn't working. I did the master reset etc., all troubleshooting possible I used to work for data support for a wireless carrier so I was familiar with what needed to be done. I called and after talking to a few people they agreed to send me a replacement, charged my card for the replacement said I would be refunded when they got the other phone back.
So today at work the evo froze. I opened it up and realized that the water indicators for the battery and the phone were showing red. I hadn't even had the phone for a day and it was nowhere near water. I called support and the tech guy I spoke with said that they would just replace the phone and probably wouldn't ask any questions and refund my money. I am just curious if I should be concerned with having to hassle with sprint when they get the phone back. I don't know if this happened in transit or on the manufacturers end. I am also not sure if that technicians word means anything.
I purchased the IR overlay from here [URL] I got it working with my mk808b by using an idc fiile, however, it only allows one touch point which means no zoom. On the computer it is multitouch.
View 7 Replies View RelatedI had A online radio working last week. I just tried it now and it doesn't stream anything. Anyone have problems with this or anything like that? I uninstalled and reinstalled the program and same affect, starts to buffer then just says "stopped". Pandora is working fine for me.
View 17 Replies View RelatedIs there a working snapshot of Android that will run on my HTC Touch ("ELF0300" with OMAP850 processor)?
View 2 Replies View RelatedI am getting this multi-touch events in my application for which the logs are shown below.Multitouch is not working in my application.Does it mean that there is some problem with framework or my application.
Sequence:Just two fingers pressed to the screen,dragged and then lifted both.
Inputdevice: ID[0] Down
Inputdevice: ID[0] Down
Inputdevice: ID[1] Up
Inputdevice: ID[0] Up
I think for the last event it should have been ID[1] instead of 0?? Am i right?Is it a framework problem or some problem with my application?
After flashing Radioactive Froyo 1.8.7 Panda Radio doesn't work. It loads but when I go to run it a popup appears and says it has stopped unexpectedly to retry. No matter retrying it won't work.
View 4 Replies View RelatedI just wondered if anyone had managed to radio 5 live working on the htc hero?
View 5 Replies View RelatedAs we've all heard countless times, the Droid supports multi touch capabilities, but does not include them in the onboard software. Are any Dev's out there working on a multi touch capable software keyboard? I'm sure the majority of the Droid-owning population would shell out $$ for one...that should be incentive enough.
View 3 Replies View RelatedMy EVO has been answering phone calls in my pocket. I've even "butt dialed" a couple of people when I forgot to turn of the screen before sticking it in the pocket.
If I forget to turn off the screen, that's my fault, but the screen turns itself on when the phone rings.
How the heck is a capacitive screen working through fabric, anyway?
Went into test mode to check out the battery. And through my curiosity went into the 'touch-fw update', and now I can't use my phone. I have the touchscreen lock so can't unlock it, otherwise maybe I could use the keyboard or the optical joystick to use the phone. Is there any way to fix this? I might attempt a hard reset, but saw on another forum, that it's unfixable. I bought it at Best Buy and they aren't even open tomorrow, would another Best Buy or Sprint store exchange it if I can't fix it?
View 5 Replies View RelatedI've had the Evo since the release day and I loved it, greatest phone ever in my opinion. Well about two weeks ago, something happened and it broke, yeah it was my fault but i'd rather not talk about it. So I decided to upgrade to the Epic 4G, I found one and bought one last week. I immediately fell in love with that phone. Now here's the worst part, the same day I buy the phone it breaks. I accidentally dropped it from a height of around 1 feet onto my sink. The inner screen shatters but the outside glass is perfectly fine. I couldn't believe it. I believe that the new Super AMOLED screen is very fragile because I've dropped the Evo hundreds of times and nothing ever happened. I then decided to switch back to the Evo and ordered a replacement phone after a difficult process. Yesterday, I received the replacement Evo. Well I immediately notice it's refurbished and it doesn't seem to bother me. It turns on fine the first time and I proceed to activate it. First, the touch screen is not working at all. Only a few sections of the screen work even after full resets and calibrations. The phone then dies and never turns on ever again, I've tried different batteries and chargers but no luck.
View 15 Replies View RelatedI have a list activity listing various list items.My problem is that on listItemClick() method is being called when Iam using that trackball to select the list item but my list item is not getting selected when I am touching them..
What could be the problem?
Morning, I dropped my HTC Hero yesterday, and although it has a tough silicon case on it unfortunately the screen has cracked top right. At first I thought it was a hair on my screen, but hairs normally blow away So you can get an idea of how thin this crack it. It goes from top left to center left.
While this doesn't seem to have had any impact on the use of the phone (for example, touch sensitivity still works in that area and the screen is perfectly usable) I'd like to replace it.
Now this phone is under a business contract account with Orange UK, but if my employer doesn't have insurance for it what options are there to replace it? I've seen there are 2 parts, the actual LCD screen and then the touch overlay on the top. I don't believe the LCD screen is damaged since it would be far worse, it just looks like the glass has cracked. Can this be replaced?
This may be an Android 4.4 or Nexus 4 problem, but I suspect the former. I encrypted the device (using the in-built encryption stuff) and have found that now the touchscreen will only register if another part of it is touched. For example, when entering my PIN once I get into the OS itself, I have to hold down a finger somewhere else on the screen (usually having to move it between some of the later numbers).
When it comes to multi-touch features (zooming etc.), these work fine but still require another finger held down somewhere to work.
This is definitely a software problem as the touchscreen works fine when putting in the password to decrypt storage.
Is this supposed to happen - part of the encryption process - or is this a bug?