Today I checked for software update and found that JB is available for me but getting error while updating. Here what I am getting
""Unable to download software update (494.27 MB). Not enough space in device storage or SD card. Delete some items." Even the storage capacity is 2 Gb
I am using
Galaxy Note GT-N7000
View 3 Replies
I am trying to install the Android 4.3 update released yesterday. I have a Galaxy S4 SCH-i545 (Verizon). The phone currently runs stock firmware and is not rooted. When I press install now, the phone reboots, looks like it is updating, than says error and restarts. A message pops up when the phone restarts stating the update failed due to error 402. I tried to update via Kies, but it says there is no available update in Kies, but my phone says the update is available. I have a lot of data on the phone and I need my warranty to stay intact, so no Odin.
View 6 Replies View RelatedAttachment 1055321Attachment 1055322
I think the screenshots explain pretty well what my problem is, tried everything but I can't update those apps, what's worse, is that more and more of my apps get this problem. Samsung G Nexus 3
I have a rooted Galaxy S3 running PA 2.54. I used Goo Manager to install TWRP and download PA 3.0 and the latest Gapps to my SD card.
I booted into recovery. Did a factory reset, wiped cache, wiped dalvik. Then installed rom, gapps and did a reboot.
I get past the boot screen, but then I get two error messages: "Unfortunately, the process com.google.process.gapps has stopped" and "Unfortunately, Setup wizard has stopped". I keep pressing ok, but it doesn't allow me to progress any further. I can't access anything else and the only thing I am able to do is hold down the power button to reboot.
I have made a back up and restored my phone back 2.54 and everything works fine. I tried it one more time and the same thing happened.
I followed a guide to root my Samsung Galaxy S3 (GT-i9300) which used these files:
- odin3 v1.85
- CF-Root-SGS3-v6.1.tar
But when I try running the SuperSU app (installed automaticallly after rooting), I get the message:
Quote:
The su binary needs to be updated. continue?
And when I click OK, it gives the error:
Quote:
Installation failed!
I have been having trouble updating my PRL (esp. to get the battery fix without switching to airplane mode, since it messes up with the GPS) I have tried it with good/bad reception and I always get the same message "unknown error". Is it a deal breaker (should I return/exchange my Epic? Does the Airplane on/off fix messes up with the GPS permanently?
View 1 Replies View RelatedAnyone on ota 2.1 notice that email syncing is nor working as well? Since being upgraded I have noted that both my gmail and yahoo mail is not syncing on any regular schedule. If I wake phone it seems to sync but won't really check mail based on sync schedule I have set. Sometimes 2 or mores past 1 hour schedule I have set. Any others out there.
View 8 Replies View RelatedI recently went through a process recommended by Sony Support to download latest software update to my X10 (depite the fact that the inbuilt update process repeatedly informed me I had the latest software.) Now when i use the inbuilt procedure od SETTINGS/About Phone/Software update/ Update Now (with the WiFi & mobile networks setting selected) my X10 helpfully tells me "your phone will now search to see if any new sofware is available". After a few seconds it then informs me "Could not update - network error".
View 3 Replies View RelatedI am trying to update Android SDK on Windows XP. For that I open Android SDK and ADV manager and try to get available updates. The HTTPS SSL error appears. Then I go to settings, uncheck the "force https...", then add new site "http://dl-ssl.google.com/android/repository/ repository.xml" (the same as default but with HTTP protocol) then again try to get available updates.
After this step I get the weird error:
XML verification failed for http://dl-ssl.google.com/android/repository/repository.xml. Error: cvc-elt.1: Cannot find the declaration of element 'sdk:sdk- repository'. Failed to fetch URL http://dl-ssl.google.com/android/repository/repository.xml, reason: Unknown
Does anybody know what is the reason of this error? This happens on all SDKs I have on my PC: Android 1.6_r1 and 2.0_r3
I am getting following error while updating my twitter status from java code in android using Twitter4J .
CODE:................................
Anyone having trouble with widgets stop updating? Like my clock/calendar/weather/news/pretty much any widget i have stops updating after an hour. So i look at my clock widget two hours later and it is an hour behind. Happens to ALL my widgets.Even the quick turn on/off wifi,bt,gps and such. They just stop updating/showing animation.I have ADW launcher installed. I am wondering if it is that. I do not really want to remove it as i hate the stock 3 button interface at the bottom (why do i need a contacts and phone, just use the phone to look thru contacts, wasted space IMO) and am quite keen on keeping the 5 button.Any ideas? If i power off the phone and turn it back on it's fine again for about an hour. SOmetimes randomly thru the day it will start updating and working fine again then randomly stop again.
View 12 Replies View RelatedI rooted my AT&T GS3, with the intentions of putting CM10 on it. However, I've realized that I have no real need for a custom ROM, as my phone already does everything it needs to. In addition, I don't want to risk bricking my phone.I got the notification for an update to Android 4.2.1, from what my phone is running now, 4.1.1. Honestly, I have no intention to add a new ROM now, and I really just want the features of the new update. So, my question is, if I update the OS on a rooted phone via an OTA update, is there any chance of my phone being bricked or all of my data being wiped? Overall, is it completely safe to update?
View 3 Replies View RelatedI want to install an OTA, but I had rooted it using TWRP and then followed so many procedures in trying to restore to stock that I think my phone's wasted. I have been doing a lot of reading, but I apparently suck since nothing seems to make sense (or that everything seems so disconnected). It appears that what could be one long, detailed post about something is to be found in many different posts, but I understand that since there are so many phones and each one probably needs its own way of being handled.
All right, I installed adb, fastboot, an htc utility toolkit, downloaded 3 different img files (one says recoverytest.img, which is from androidruu.com/k2_cl, another one was put here on xda by one of the members, and that was simply recovery.img, and another one called HTC_ One_ Sv_K2_ Ul_boot_ signed.img <-- this is probably the wrong file since my bootloader screen says k2_Cl).
my phone was rooted. SuperSU was working fine, and one day somehow I lost the root access when SuperSU upgraded. Tried a few methods to upgrade manually but none worked.So after installing all those above, I did a variety of commands like revone, fastboot flash recovery.img, fastboot oem lock, fastboot flash boot recovery.img, all based on what was mentioned one one thread or another on the forum and mostly all of them gave me some kind of an error.
So I'm stuck now. My phone does nothing. When I reboot from bootloader, it says in red "this is for development purposes only, blah, blah". When I download the update and try installing it, the phone simply restarts. When I try to do factory reset from the hboot, the phone simply goes back into fastboot menu. My phone apparently doesn't have an RUU, only a recoverytest.img.
Here's where I am and I want to do what next. I jsut installed android sdk, and installed 4.1.2 package (which is the current version on my phone), and I want to update to 4.2.2, which is the latest update for htc one sv on boostmobile (installed the package for that in sdk also).
(A lot of people were also asking for cid, mid and phone model, and I have no clue how to make sure that the .img file is the same as my phone's).I know I am all over the place, and call me a knucklehead, but I genuinely do not understand a lot of the things that are mentioned on the forums. Every thread mentions a process, and within each process is contained a subprocess which I equally do not know.
While I go from fastboot usb to hboot, the screen flickers for a couple seconds an dmessages like "sd checking: no image or bad image" appear for a couple seconds and then I see the hboot menu. The way I understand how to do this (in layman terms) is as follows:
1. Restore to stock {by first turning S-Off, then lock the bootloader, and then RUU. I cannot get S-off using revone (revone failed, error code 2 or error code -1); the bootloader is "relocked", and I cannot get to do anything with the RUU (iow I don't know what to do with it)}.
2. Restore to factory settings.
3. Download and install the OTA 4.2.2 update.
id like to update to 4.3, but as far as I know, only a few people have had success keeping root, without having to re root. Is it at all possible, such as if I used superSU pro survival mode, or something else? I don't have access to a computer to re root, and want know if has had success with keeping root. I don't wanna risk bricking the phone.
View 7 Replies View RelatedI noticed late last night that since my update I am no longer getting any notifications (Facebook, Gmail, Twitter etc etc) since updating to 4.3 on my Nexus 7.
I had a look with in the settings but cannot find anyway of turning them back on.
I am trying to update my Bionic to ICS, but, when I do, I get "Check for update is not available at this time. Try again later." I was able to update my wife's phone, but, cannot on mine.
View 2 Replies View RelatedI have never had a smart phone before and ill be getting on to the next 1 to 3 days its a Virgin Mobile chaser. and im planning to root it. (the question) whenever i root the phone , how should i update the phone , the apps , widgets , and ect?
View 5 Replies View RelatedI have galaxy s2 with sprint. I guess they updated my voice mail today and it didn't transfer my voicemails! Is there someday to get it back?
View 2 Replies View Relatedafter using my mobile for few minutes, my battery % reduces , but when i get into recovery page it shows the correct % of my battery and when i do the battery stat wipe, my % in mobile turns back to normal....and its not the rom problem, cause am facing it in all roms.
how to get rid of this thing or any way to wipe the battery stat in the rom itself?
I have been using UCCW for a long time now and i cant get it to update the weather when i want... I have manually set my location and each time i want the weather to update i have to go in settings, choose auto-location, then set location manually again, then press back and now it updates.
I'm running Omega v40 with stock kernel and have tried with other roms aswell.
There are any way to force the users to uninstall the aplication before they update to the newest version? In Android market.
View 3 Replies View RelatedI tried to Google this but just kept getting results about what phones have what Rom updates and how to update apps.
The recent updates to the Trillian app are pretty terrible, I and many others are choosing to stick with the older version. Problem is I have many apps installed on this phone. I am no longer able to hit "UpdatecAll" as I do not want the Trillian app to update, so I am forced to manually open the page for each app that has an update and update them one-by-one. A very annoying and tedious processes, especially since if I wait so much as a week there can be up to 20 updates to install.
Is there any way I can somehow block this one app from being updated or put it on a no update lust or something?
I don't like to have my apps auto-update.
I remember seeing somewhere that one of JB's new features is the ability to only download the parts of an app that changed for an update instead of downloading the entire app again to save data. I'm on a Bionic with the 232 ICS leak and just watched a 45 MB app update download only 13 MB and then successfully complete the update and run. Is this a feature of ICS now too?
View 3 Replies View RelatedI have been searching the way to root this device and probably update it !! it is Zync Z5 cloud black colour !!
View 1 Replies View RelatedI've just set up a adblock to block some specific ads and websites. I want to know if I update my rom, cm10.2 nightlies will it reset those files.
View 3 Replies View RelatedI have a rooted (w z4)droid x thats running 2.21. The update keeps failing so I did a factory restore...now every reboot takes me to clockwork mod recovery boot screen....but once it boots...update fails
I don't have bootstrap, clockwork mod or original z4 installed but it seems it's still rooted. I still seem to have the super user app installed. What can I do know to wipe it...and install a new update?
The widget is ThreeBarClock - UCCW by RyanMKelly. [URL] ....
When device is in sleep and I switch it back on, the widget is still 'stuck' behind time and doesn't get updated for a few seconds. Anything I am doing wrong? I am using Nova Prime launcher. I first noticed the problem when I hid the notification bar via Nova settings. I had since enabled the notification bar but the problem still persists.
I am using Lewa Rom v13.06.07 on my Jiayu G3 android phone and am very happy with it. The best thing I have seen. However, there is one thing that needs fixing. When I use Viber and exit from it by pressing home button everything still works but if I close it by "sliding" it as you normally close all non running apps it stops and you get no calls or notifications. This is also true for some other apps like HD Widgets (the clock stops updating) and so on.
I believe these issues are caused by built-in task killer which stops all "unnecessary" processes.
So, I wonder if there is some way to set the rules which process will still run in the background
I just got this phone but it's having a weird problem. The battery % seems to drop off in big jumps instead of gradually.
For instance, I also have an Xperia Play, if I run the LED as a flashlight, I can see over a few minutes the battery % goes down gradually.
This new phone, Samsung Galaxy Q, if I run the flashlight, nothing changes in a few minutes. But if I check back after locking the phone a few minutes later, it shows a battery drain.
Another example, before I went to bed, I had it charged to 100%. When I woke up 7 hours later, I checked and it was still at 100%. I checked after I got dressed a few minutes later, and it just dropped to 90%. During my trip to work about half way while playing music, half way to work, it was down to about 86%, kept checking, and no changes. When I got to work at my desk, the battery hit 77%.
My battery graph when I goto battery use is basically this, straight line....DROP, straight line...DROP, etc.
After the update everything is working fine but I don't get the service.... I mean the mobile network is unavailable.... I can't make any calls...
View 4 Replies View Related