My Micromax canvas 2 was bricked during the process of updating to jelly bean from ICS. I am not under warranty.
Symptoms
1. Not able to boot, Phone completely dead
2. Not able to go into bootloader
3. While connecting with SP flash tools, it just kept on beeping nothing happened, after a long while it somehow got connected but it threw me attached error.
View 1 Replies
I have updated the unrooted Jelly bean on my canvas a110. Now i want to root it. i can't do it with different options i tried. I also can't install/flash CWM recovery on it.
View 1 Replies View Relatedi have rooted my galaxy note 8 with framaroot jus to use a mouse and keyboard emulator no to do anyhing technical or some ROM things and then i " regretfully" have updated the device to jelly bean 4.2.2 and now i am lost im not rooted and though i have the supersu app installed and stuck , it cannot be uninstalled.i have ried to use root manager to remove the file from inside , it tells me it has been removed however it is not also it cannot be opened it tels me " there is not SU binary installed , and superSU canot install it , this is a problem" tried to re-root the devise again , downloaded the latest framaroot . i doesnt work and tells me " failed ry anoher exploit if available" all of the other options are giving me the same thing.
View 2 Replies View RelatedI'm encountering some problems when i'm trying to update my Hyundai T7S tablet to the official jelly bean 4.2 ROM.
I've the update from the Hyundai website (hyundai-digital .cn). This download comes in a .rar file. I knew it would be impossible, but tried anyway to flash this file from the SD-card. But to make it work this way, the update should be a .zip-file.
In the .rar file are 15 files, some of them are .bin and .img files. And I've not the knowledge what I can do with these files. Unfortunately the support guide of Hyundai can not be opened and two hours Google.
Is it possible to convert the .rar file into a .zip file and flesh this file? Or can I flash the rar-file in some way?
After updating my S6012 aka Samsung Galaxy Music Duos to JB by looking at this guide.. [URL]
My phone networks 3g and WiFi have lags.. In WiFi mode it connects but network is not found.. In 3g mode it takes so long to on even google.com.. First time i did it worked fine then few days ago i sent the phone into bootloop and then did it second time two days ago..
I updated my Xperia SL to jelly bean 2 days back in India.The issue i'm facing is it taking more then 9 hours to charge my phone to 100% and its discharging very fast. How to rectify that issue.
View 2 Replies View RelatedI am using Micromax Canvas 4 ( Android 4.2.1 ) . I have installed some pirated games on my device and right after 1 week all the signal bars goes down. Now there is no signal on my device from last month. Sometimes they come after 7-10 days and went away the same day.
I have tried these following steps :
1. Rebooting several times.
2. Factory Reset.
3. Changing SIM Card.
4. Changing automatic network selection settings to manual and then to automatic.
P.S. : Whenever I change my SIM card it says " Your phone date is inaccurate". < - - May be this is the reason.
I've just updated my S4 (GTi9505) to version 4.3, and now all the apps which are on my SD card are grey squares rather than their own icons! How can I sort this out and keep them on the SD card? I've tried moving them to the phone storage and the pics come back, but as soon as i move them back to sd card they're gone again!
View 9 Replies View RelatedIt will open for less than a second, I once got it to say, "Unfortunately, Google Play has stopped" or something along those lines.
Cleared cache, nothing. Cleared data, it got as far as letting me accept terms and in the notification bar told me I had apps to update, but then shut down again. As far as I can remember Play Store was working before I updated.
I updated on a rooted Galaxy S 3. I was running stock everything, I believe. I had only changed the camera shutter noise.
I am using the AT&T SGH -1337 Samsung Galaxy S4. Android version 4.2.2. Unlocked to work with T-Mobile, USA. I am unable to uupdate the phone to any other build because it checks AT&T servers for updates. Since I am on Tmobile, it will never find updates. II've tried to use Kies. But it says my phone isn't supported or that the baseband isn't supported. correct direction on any way to manually update this device.
View 1 Replies View RelatedI have a rooted Galaxy S3 (version 4.1.1) and im trying to update it, after the file is "downloaded" my phone reboots but there's the problem, the CMM based Recovery v5.5.0.4 screen appears. I clicked on the "install zip from sdcard" option but it fails to update and says Can't open /sdcard/update.zip (No such file or directory). This is what appears on screen...
View 3 Replies View RelatedI have bought a GADMEI E8HD Tablet from efox. Its a great Tablet, uses 0912 as Firmware and it runs fine!
And then, Firmware 1011 is coming out. OK, no Problem. Flashed it and then: DEAD.
Nothing. It stays Black, doesnt do anything, even on USB.
I know from [URL] .... and [URL] .....
I'm looking for a tutorial to Root and then revert back to JellyBean from KitKat on a Nexus 7 2013 2nd Gen, non carrier, WiFi only, or Whatever is required to switch back to JB from KK..
View 1 Replies View RelatedI have a Coolpad 8720L with its own interface built upon 4.3 Jelly Bean. It's not very good, and I'd like to install stock Android instead. How do I do this?
I heard that I have to root the device, and then find a ROM for stock Jelly Bean to load onto the device?
I just purchased my first ever cell phone ( Google LG Nexus 4 16gb ) . I have never used one before , just never had the need for one . How to use Android Jelly Bean 4.3 and also how to use this phone .
View 5 Replies View RelatedBest way I could describe it. On ICS the dialer would allow me to type a number and come back to it later, now when I multi-task the number disappears. I am running 4.1.2 on a HTC Desire 300, and the dialer is stock to the best of my knowledge.
View 4 Replies View RelatedThe jellybean box itself turns on and the home screen loads up. I select the page where all the apps are...select xbmc app...sometimes it flicks back to main apps page other times the screen turns black/blank. I can't get further than this page....my box has worked perfectly for the past 3 months since purchasing. I can't get into the settings page as I can't get past the blank .
View 1 Replies View RelatedAwaiting delivery of my Nexus 4 - 16GB, is there software to back up the phone data to my PC?
View 3 Replies View RelatedMy bro has a note running jb. He has a secgallery app which I cant install on my xperia u wid ics
I always get an error "App not installed".
I have decompiled the app... But m nt a modder so I dun knw what changes to make in androidmanifest or some other folder to run it..
After I flashed a couple roms I couldn't boot jelly bean anymore and I noticed the error in recovery: E: Cant Mount /efs, when installing. But I could still boot ICS but not jellybean. I still had my IMEI and could make calls but could not boot jelly bean because it couldn't mount.
Sometimes when installing a rom something goes wrong and it changes the partition type of /efs making it unable to be mounted. The partition is usually from ext4 to swap.Most likely this will work on your phone but if it doesn't and your phone stops working I am not responsible.
If your like me and you couldn't get jelly bean to work then flash your device back to ics and it should boot. Once your booted inside of ics we can start the process.
Pre-Setup:
1. Be rooted and have a custom recovery installed.
2. Be on Ics and it boots.
3. Your need to have a Jelly Bean rom like Cyanogenmod on your sdcard.
4. Have adb installed on your pc and usb debugging on in your phone/tab.
Now that that's done its time to start.
Part One:
1. Boot into recovery.
2. We need to find the efs block location.
3. Go to mounts and select efs
4. It should say unable to mount
5. Go to advance and make a recovery.log
6. Put that file on your computer and open it.
7. Look through the file and you should fine something like this around the beginning of the file:
E:Unable to mount '/efs'..Actual block device: '/dev/block/mmcblk0p3', current file system: 'swap'..My location is /dev/block/mmcblk0p3 But yours could be different! Most likely the difference will be instead of it ending with a 3 it will be a different number. I will be saying /dev/block/mmcblk0p3 if yours is different just change it to your location.
*WARNING* Sometimes when you copy paste into adb it will auto run the command without you pressing enter. If your location is different then mine and you copy past and it auto runs it could be BAD so to be careful if you want to copy past. Copy the command paste it into Google make the change and copy that and paste into adb
Part Two:
1. When your inside recovery connect your phone to your computer and get into a adb shell. (Sometimes it will take awhile for adb to recognize your device so be patient.)
2. Once you have adb access its time to start entering the commands.(Again my location may be different the yours! Most likely the difference will be instead of it ending with a 3 it will be a different number.
Part Three Inside ADB:
1. su
2. dd if=/dev/block/mmcblk0p3 of=/sdcard/efs.img
3. mke2fs /dev/block/mmcblk0p3
4. mkdir /efs
5. mount -t ext4 /dev/block/mmcblk0p3 /efs
DONT REBOOT PHONE
Part Four On Your Phone:
1. Now /efs is mounted don't unmount it
2. Do a factory reset
3. Install your Jelly Bean rom
4. It should install without any errors
5. Boot your phone
6. If everything went well it should boot.
7. After it boots your signal notification most likely will be gray and internet or calls may not work
8. To fix just install gapps and it will be fixed
There you have it if everything went correctly your efs should be working good and you should be able to go back and do your normal rom flashing.
If jelly bean boots but you don't have phone do this:
1. Go back into recovery and get adb access.
2. su
3. mke2fs /dev/block/mmcblk0p3
4. mkdir /efs
5. mount -t ext4 /dev/block/mmcblk0p3 /efs
6. dd if=/sdcard/efs.img of=/dev/block/mmcblk0p3 bs=4096
I just recently bought the Samsung Galaxy S II on the Straight Talk network. The phone comes stock with the Android Gingerbread 2.3.6 OS and I'd like to upgrade to the latest Android Jelly Bean 4.2 OS.
Here are the phone facts:
Network: Straight-Talk
Model Number: SGH-S959G
Android Version: 2.3.6
Kernal Version: 2.6.35.7
Build Number: GINGERBREAD.UDLG1
I came across a thread to get Jellybean animations on ICS, I did a search but I cannot find it. HTC Vision
View 1 Replies View RelatedI've got an replacement of my karbonn A2+ via company.
I want its backup and flash file..
Is it possible to upgrade HTC One V to Jellybean 4.2?I have tried running software update located in settings-->about phone but it says that there are no updates available.So is it possible to get jellybean 4.2 on my phone?Are there any risks involved?Can updating to jellybean harm my phone?btw my phone is rooted. What cyanogen mod is?Can i first install jellybean 4.2 and then install cyanogen mod?
View 1 Replies View Relatedim trying to port crt off and on ..on deodex'd stock rom..i had try'd these methods but it didnt work'd out on jelly bean..link for porting crt off on stock jelly bean rom for GT-i9082
i had try'd these methods but no use..
[URL]
I've attempted to build two different sources, one modified ICS AOSP and another from straight up JB AOSP. Both err on me.
JB spits out the following:
Quote:
make: *** No rule to make target `out/target/product/devicetest/obj/STATIC_LIBRARIES/lib_driver_cmd_wext_intermediates/export_includes', needed by `out/target/product/devicetest/obj/EXECUTABLES/wpa_supplicant_intermediates/import_includes'. Stop.
make: *** Waiting for unfinished jobs....
target thumb C: wpa_cli <= external/wpa_supplicant_8/wpa_supplicant/src/utils/edit.c
I'd prefer to get JB working, but would be satisfied with ICS for now.
Running RemICS-JB on my infuse, hotmail won't connect. Tried using m.hotmail.com and debug-m.hotmail.com and neither worked.
View 2 Replies View RelatedI'm looking to find jelly bean 4.1.1.
link to where I might be able to download this version?
i recently updated from ics to jelly bean 4.1.2 on my Samsung galaxy s2 on 02 uk network, i have noticed a few different issues since the update though regarding blocking calls and i notice the feature isnt as good since the update
previously on ics when blocking a number, once a number called they would be present with "dud a duh sound" which made the phone sound like the number was disconnected it would also not divert the blocked number to the voice mail
since doing a test on jelly bean when blocking a number, it now diverts them to the voice mail, and what's more annoying is once a blocked number calls it seems to one ring on my phone and then divert them to the voice mail, similar to as if i was cancelling there call every time, which is no were near as effective
ive just tried an app called mr number and this is the same, although this does have the option of a "hangup feature" and a send to "voicemail feature" again when the blocked number calls it seems to one ring and then either be disconnected or diverted to the voicemail, which again is like your cancelling there call every time after one ring
on ics when blocking the number they were never presented with the ring tone on there end, they were only presented with the sound of a disconnected line etc. How i can get that feature back???, without using mr number which doesn't do it as well
id like it to be like it was with ics, so basically the blocked number doesn't even get the chance to to be diverted to voice mail or to be not connected at all??? and certainly so it doesnt one ring on my end before the divert/block kicks in, on ics the blocked number never got that far, it was blocked instantly and presented with the disconnected sound, and then i was shown on my phone a log they had attempted to call., i also dont want to give the impression im cancelling the call on my end, as like ics, this was a good feature as certain people would just think your unreachable, know when a blocked contact calls with the new system under jelly bean it looks like your cancelling there call everytime after a one ring.
also is it still not possible to block text messages from certain spam numbers?
Has successfully established a bridge mode VPN connection (using TAP) in any version of Jellybean, stock or custom?
It seems that every vpn app in the play store suggests that this can't be done in JB. I'd really like to upgrade to JB, but I really don't feel like reconfiguring my whole VPN setup, just to log on to my home server every once in awhile.