im trying to port crt off and on ..on deodex'd stock rom..i had try'd these methods but it didnt work'd out on jelly bean..link for porting crt off on stock jelly bean rom for GT-i9082
i had try'd these methods but no use..
[URL]
View 1 Replies
I have a Coolpad 8720L with its own interface built upon 4.3 Jelly Bean. It's not very good, and I'd like to install stock Android instead. How do I do this?
I heard that I have to root the device, and then find a ROM for stock Jelly Bean to load onto the device?
The magnetic sensor in my stock rom (JB) is deviated from the direction. and it is due to faulty sensor files in the stock rom. The sensor works perfect in old ICS version.
Calibration apps wont work because the problem lies in the sensor files itself
Stock icon app drawer it looks like 4 white quarter circles with 6 white squares inside.
View 4 Replies View RelatedI will upgrade my stock ICS 4.0.3 to JB when that is released to my Samsung S2. But the problem is that I have removed a lot of bloatware on my phone like Game Hub, Music Hub but also the stock-clock (and more) with Titanium Backup. But will that cause a conflict with Jelly Bean when JB is being installed? The system is missing files and apps, and then JB is installed on top of that. Sounds like a setup for problems to me. Tried JB with uninstalled stock-apps on their old ICS?
View 2 Replies View RelatedI was wondering about how to backup my apps from stock GingerBread 2.3.3 to restore them on a Jelly Bean 4.1.2?
To be exact I just want to back up Kik Messenger.
I9000
I'd like to know what are the differencies between kernels for, for example, CM10 and stock manufacturer's JB. Can we use stock kernel to build something different from stock?
View 5 Replies View RelatedI'm curious how can i modify the status bar [URL] .... <---- where is wifi activation ,data sound etc.
and
notification bar [URL] ..... <--- Where is the battery ,clock wifi signal etc.
I want the notification bar ICS like (blue icons) and the notification bar icons the same ,just change the color to blue.
I followed a guide in order to change framework-res.apk and SystemUI.apk from /system/ ( my phone is rooted + cwm) but i couldnt get it going (i couldnt find all the icons to change).
I tried few keyboards so far and non of them is good as the JB stock one, my problem is that I cant add additional dictionary to the stock keyboard.
I would like to add a Hebrew dictionary...
Unable to find my stock firmware.. every link points to the same file from hotfile.com and my ISP provider sucks causing the download to get stuck in between, tried two times at 100Kbps, failed both the times, once at 62%(552 MB)! its very hard to download it, any non hotfile link or some direct link if possible, can download it and host it as a torrent or something because i have very bad net connection and its slow also.
I am talking about Samsung Galaxy s3 19300 International/India Jelly Bean ROM, or even ICS stock might be ok. _
right now i have the stock ROM and Siyah Kernel and i want to clean instal everything and remove root.
I need to back up the stock room i don't need to root i made a serch i found that cwm recovery is the best way but i don't want the worng logo on reboot so can i install cwm recovery and make the backup then remove it and return to stock recovery ... is this possible ..
View 2 Replies View RelatedI use a galaxy S3, 4.3 and there is a problem with the stock sms app regarding the numbers. When i receive a message that contains words and a phone number, it doesn't hyperlink the numbers. I have to memorize the number to save it, or to make an action.
The numbers are not clickable, although the websites are.
I have a device here that's not running well on 4.2.2. If I back it up using KIES will it be possible to install the older 4.1.2 Rom and then install the backup I previously made? I'm asking cause I'm pretty sure that it wasn't possible to install a backup from a newer OS version (iOS 7) to my iPhone 4S running an older OS version (iOS 6).
Where to get a stock 4.1.2 Rom for a Samsung Galaxy S2 Plus?
I've tried volume+, volume down and power button. I've tried just the volume buttons, I can't seem to get it
View 4 Replies View RelatedI have a Note 3 Bell Canada and have not touched it at all other than the OTA update from 4.3 JB to KK 4.2.2. I of course read the woes and pro's of KK 4.2.2 after I did the update!! grin! and do not like the restricted access to my SD card folder creation file transfers etc and want to go back to JB. "A", can I go back with Odin and a stock Bell JB for the note 3, and have it all back like I did before the update...."B" What about my trip counter etc? Will that be effected?
View 4 Replies View RelatedI have had my phone nearly a year and how it's got a cache of people I've sent emails to, because sometimes I want to retrieve an address I didn't think I'd need again... However, it also presents some annoying issues. It also saves every typoed address I've ever fat-fingered, and sometimes it comes up as the first choice when it was for someone in my contacts, and I then send a message to a bad address. If you go to write an email and press that little 'contact' button in the "To" field area, it shows me a list, and I don't know where some of those are coming from - it's some but not all of my contacts and some but not all of the addresses I've ever written to. I would like to clean out the fat-finger errors and also that mysterious list that comes up when you press the little contact icon when composing an email, without taking a scorched-earth approach. Googling around indicates to me that this has annoyed people for years and nobody's found a solution.
I have a Galaxy S3 running the recent update to 4.3.
I'm looking for a tutorial to Root and then revert back to JellyBean from KitKat on a Nexus 7 2013 2nd Gen, non carrier, WiFi only, or Whatever is required to switch back to JB from KK..
View 1 Replies View RelatedI just purchased my first ever cell phone ( Google LG Nexus 4 16gb ) . I have never used one before , just never had the need for one . How to use Android Jelly Bean 4.3 and also how to use this phone .
View 5 Replies View RelatedBest way I could describe it. On ICS the dialer would allow me to type a number and come back to it later, now when I multi-task the number disappears. I am running 4.1.2 on a HTC Desire 300, and the dialer is stock to the best of my knowledge.
View 4 Replies View RelatedThe jellybean box itself turns on and the home screen loads up. I select the page where all the apps are...select xbmc app...sometimes it flicks back to main apps page other times the screen turns black/blank. I can't get further than this page....my box has worked perfectly for the past 3 months since purchasing. I can't get into the settings page as I can't get past the blank .
View 1 Replies View RelatedAwaiting delivery of my Nexus 4 - 16GB, is there software to back up the phone data to my PC?
View 3 Replies View RelatedMy bro has a note running jb. He has a secgallery app which I cant install on my xperia u wid ics
I always get an error "App not installed".
I have decompiled the app... But m nt a modder so I dun knw what changes to make in androidmanifest or some other folder to run it..
After I flashed a couple roms I couldn't boot jelly bean anymore and I noticed the error in recovery: E: Cant Mount /efs, when installing. But I could still boot ICS but not jellybean. I still had my IMEI and could make calls but could not boot jelly bean because it couldn't mount.
Sometimes when installing a rom something goes wrong and it changes the partition type of /efs making it unable to be mounted. The partition is usually from ext4 to swap.Most likely this will work on your phone but if it doesn't and your phone stops working I am not responsible.
If your like me and you couldn't get jelly bean to work then flash your device back to ics and it should boot. Once your booted inside of ics we can start the process.
Pre-Setup:
1. Be rooted and have a custom recovery installed.
2. Be on Ics and it boots.
3. Your need to have a Jelly Bean rom like Cyanogenmod on your sdcard.
4. Have adb installed on your pc and usb debugging on in your phone/tab.
Now that that's done its time to start.
Part One:
1. Boot into recovery.
2. We need to find the efs block location.
3. Go to mounts and select efs
4. It should say unable to mount
5. Go to advance and make a recovery.log
6. Put that file on your computer and open it.
7. Look through the file and you should fine something like this around the beginning of the file:
E:Unable to mount '/efs'..Actual block device: '/dev/block/mmcblk0p3', current file system: 'swap'..My location is /dev/block/mmcblk0p3 But yours could be different! Most likely the difference will be instead of it ending with a 3 it will be a different number. I will be saying /dev/block/mmcblk0p3 if yours is different just change it to your location.
*WARNING* Sometimes when you copy paste into adb it will auto run the command without you pressing enter. If your location is different then mine and you copy past and it auto runs it could be BAD so to be careful if you want to copy past. Copy the command paste it into Google make the change and copy that and paste into adb
Part Two:
1. When your inside recovery connect your phone to your computer and get into a adb shell. (Sometimes it will take awhile for adb to recognize your device so be patient.)
2. Once you have adb access its time to start entering the commands.(Again my location may be different the yours! Most likely the difference will be instead of it ending with a 3 it will be a different number.
Part Three Inside ADB:
1. su
2. dd if=/dev/block/mmcblk0p3 of=/sdcard/efs.img
3. mke2fs /dev/block/mmcblk0p3
4. mkdir /efs
5. mount -t ext4 /dev/block/mmcblk0p3 /efs
DONT REBOOT PHONE
Part Four On Your Phone:
1. Now /efs is mounted don't unmount it
2. Do a factory reset
3. Install your Jelly Bean rom
4. It should install without any errors
5. Boot your phone
6. If everything went well it should boot.
7. After it boots your signal notification most likely will be gray and internet or calls may not work
8. To fix just install gapps and it will be fixed
There you have it if everything went correctly your efs should be working good and you should be able to go back and do your normal rom flashing.
If jelly bean boots but you don't have phone do this:
1. Go back into recovery and get adb access.
2. su
3. mke2fs /dev/block/mmcblk0p3
4. mkdir /efs
5. mount -t ext4 /dev/block/mmcblk0p3 /efs
6. dd if=/sdcard/efs.img of=/dev/block/mmcblk0p3 bs=4096
I just recently bought the Samsung Galaxy S II on the Straight Talk network. The phone comes stock with the Android Gingerbread 2.3.6 OS and I'd like to upgrade to the latest Android Jelly Bean 4.2 OS.
Here are the phone facts:
Network: Straight-Talk
Model Number: SGH-S959G
Android Version: 2.3.6
Kernal Version: 2.6.35.7
Build Number: GINGERBREAD.UDLG1
I came across a thread to get Jellybean animations on ICS, I did a search but I cannot find it. HTC Vision
View 1 Replies View RelatedI've got an replacement of my karbonn A2+ via company.
I want its backup and flash file..
Is it possible to upgrade HTC One V to Jellybean 4.2?I have tried running software update located in settings-->about phone but it says that there are no updates available.So is it possible to get jellybean 4.2 on my phone?Are there any risks involved?Can updating to jellybean harm my phone?btw my phone is rooted. What cyanogen mod is?Can i first install jellybean 4.2 and then install cyanogen mod?
View 1 Replies View RelatedI've attempted to build two different sources, one modified ICS AOSP and another from straight up JB AOSP. Both err on me.
JB spits out the following:
Quote:
make: *** No rule to make target `out/target/product/devicetest/obj/STATIC_LIBRARIES/lib_driver_cmd_wext_intermediates/export_includes', needed by `out/target/product/devicetest/obj/EXECUTABLES/wpa_supplicant_intermediates/import_includes'. Stop.
make: *** Waiting for unfinished jobs....
target thumb C: wpa_cli <= external/wpa_supplicant_8/wpa_supplicant/src/utils/edit.c
I'd prefer to get JB working, but would be satisfied with ICS for now.
Running RemICS-JB on my infuse, hotmail won't connect. Tried using m.hotmail.com and debug-m.hotmail.com and neither worked.
View 2 Replies View RelatedI'm looking to find jelly bean 4.1.1.
link to where I might be able to download this version?