I have a Android tablet and I want to use it as a second screen for my computer. Of course there is Apps for this like iDisplay, but it's not at all comfortable, and i prefer USB. So is it possible to use the tablet like a second screen only ? Turn off Android and just use the screen of the device ?With Windows 8 we can easily share the screens, and i want to optimise that point...
View 4 Replies
I have an ANDROID tablet with screen resolution of 600*976 which is quite rare and is not supported by many ANDROID apps....here comes the question : is it possible to change the screen resolution of display? eg 800*480?
A12(C1B2)
Is there any kind of clockworkmod for this? Or ideas of another way to get it to boot up? Ifi am lucky enough to get to the stock recovery, it freezes up.
View 1 Replies View RelatedI have an android tablet (I'm not really sure what brand it is, but on the back it says m706b) that does not boot anymore.... it just sits at the "loading..." screen. Can I factory reset the device somehow?
View 6 Replies View RelatedInverting any axis of input or similar is possible for touch screens on tablet pc? (currently needed for gingerbread 2.3.1)
View 1 Replies View RelatedI keep getting a message when battery is low and runs of power. When i try to turn on the tabletI get a blue screen that asks to reboot and a series of requests to update in Various ways. When I reboot it comes on and is glitchy. It turns on in safe mode. When I check out the requests I get a Scary green screen with a lot of writing and symbols I don't understand. Also I can't get the information for the nook that on the tablet, it won't open. Very much. not a skilled user of this new technology stuff. Of age to remember as an adult getting my first computer with no Internet
View 6 Replies View Relatedhow to screen mirror between my Samsung galaxy note 3 and my Samsung galaxy 10.1. i want to watch movies i have downloaded, through Google play, on my phone on my tablet for a bigger screen. I have sprint for my phone and my tablet has no service. Where this connection needs to happen is in places with little or no service. And before you say just download movies to my tablet when i'm hooked to wifi, i have. My tablet only holds 3 movies at a time, while my phone holds more than 10.
View 4 Replies View RelatedWould like to have EASY capability and not the need for anything bulky to take the screen on a PC / Laptop / Tablet and share that onto a HDTV or Projector for group projects in an office setting. Tablet is not a must but would be nice to be able to do going forward. So the idea would be someone who show an idea from their Laptop and plug in something of a USB device or could be software based but that is not preferred option. The project then could be sent to HDTV or Projector via possible wireless casting device. Have looked into various devices but hoping for some feedback from someone who has set this type of room up. Additional notes would the HDTV or Projector would NOT be connected to any server or PC we want it to be done wireless directly from the PC / Laptop / Tablet and screen shared directly to the HDTV / Projector.
View 7 Replies View RelatedMy China tablet will not turn on. The screen lights up but nothing else happens.There is no reset button, pressing volume and on button together does nothing.
View 1 Replies View RelatedI have a A10 Chinese Tablet with no brand (called DesireTab) and no official firmware, I have try to install cwm with no success and after my tablet no more boot in android but only boot in cwm ... I have try to install ROM from other tablet but the only want to boot is one from LY-F918 ... with no touchscreen and wrong colors (I post a photo of the boot), after I mod a ROM from Cherry Mobility M906(??) And touchscreen and all other hardware works but not the colors ..
P.s. I have open the tablet and disconnected lcd flat And reconnected ... with no luck !
Recently I have rooted my android tablet and I was exploring what I could do. One guy was telling me about an app that can work with performance in game(ChainFire 3D). He said it lowers the pixels in the game to run better. I tapped the install button and it said rebooting now. It then started to reboot but then proceeded to get stuck at the boot screen. I tried doing a hard reset but it is still stuck. I have also tried flashing the stock rom, but I get installation aborted when I try and install it.
View 4 Replies View RelatedI have had an EKEN T02 tablet for one year now. For almost one month every time I switch it on there is a straight line running through my screen.
Sometimes it is green and thinner and sometimes it is grey and thick. As my screen keeps working it gradually fades away but it never disappears.
I have just bricked my tablet by puting another recovery.img.. and now the tablet only shows boot screen. How can i connect it to pc to usb adb to restore it...or another method?
tabletrestigio 5197D ultra
I've The Tab "BSNL Penta IS701c". Which Is Rooted Also & Having No Problems.... But Some Apps Like Webroot Security,Kasper key Security ,Sketchbook Pro v2.5.1(Specially)
I've Got Following details Like
"BSNL Penta IS701c"
Screen Resolution......800*480
But Showing 800*455 In Benchmark(maybe cause of status bar Which Get 25 pix hight)
So I cant open These Apps.......(maybe Other Problem)
I have a Motorola XOOM WIFI US version (don't remember exactly the Android version, but it's 3 point something). It was rooted and unlocked, but I decided to relock it, so I followed a tutorial to do it.
Everything worked fine and, despite the long process and the several steps, I didn't have any problems at all, but when I finished flashing the images from the usb, the tablet automatically rebooted and now it's stuck at the boot screen, with the Motorola logo.
I have read some topics with the same issue and I always see the same solution: go into the recovery mode, but the problem is that I can't even access the recovery mode. When I push the vol + button to select the "recovery" option, I just got a message "Reading ODM fuse: 1", and there's nothing else I can do. I can't even shut the tablet down.
I received a generic Chinese table. it worked well for about two-and-a-half months. Then, just recently, I discovered rooting and the wonderful things it allowed you to do. I decided to download a system-tweak app, which included a CPU control. I was a little wary of overclocking my CPU, having heard it may decrease its life expectancy, but finally I thought "What the heck?" and in a brilliant stroke of genius cranked my 1Ghz processor up to 1.5Ghz, and it promptly froze, forcing me to power it down. When I turned it back on, I discovered that it had been factory reset. I re-installed my apps, including the system-tweak app, and decided not to touch the CPU controls for a while. Soon after, while at my sister's talent show, I discovered I had about 30% battery life, and I was still supposed to record her. So I figured I'd underclock it to save the battery.
Unfortunately, as my finger touched the slider, my brother bumped my arm and caused me to lower the CPU frequency to its lowest setting. It became extremely sluggish, almost to the point of being unresponsive, and finally I had to shut it down. When I restarted it, it started to boot but then got stuck on the shimmering Android logo, and now that's all it does. I can't even boot into recovery mode, and unfortunately I had just turned off USB debugging that same day.
Device: MTK6575 Tablet with Analog FM
OS: Android 4.0.4
Condition: USB Debugging enable
Currently my Tablet behave strangely where when I switched it ON, it did run as per normal. But when I slide the unlock slider, the Tablet switch off.
I did a backup user data. Try entering recovery, wipe data/reset factory. Reboot the Tablet, it also did run as per normal. But when I slide the unlock slider, the Tablet switch off.
Then I try another approach. Try entering recovery, wipe data/reset factory. Connect the USB cable to computer. Reboot the Tablet, it also did run as per normal with no unlock slider where it did show a USB enable menu. Press back and it did run as normal. Then I disable the "slide the unlock slider" in setting. Everything work as per normal. Try restart and no problem.
Then I restore previous user data, unfortunately I cannot disable the unlock slider. Try Connect the USB cable to computer, the slider still there.
I'm looking for a way of disabling the unlock slider via ADB command.
Another way I can think of is sideload "Screen lock suppressor" apk into system.[URL]...
Now I forget how to push the apk into system. Or, any other apk to disable the unlock slider.
i have here a 7'' tablet that i would like to insert in a acessorie in my car. the problem is that once inserted, i cannot seed the entire screen. i have to reduce the screen displayed in the tablet to match the accesorie size. is any app or mod to do it?
View 1 Replies View RelatedI bought a bricked Bruneau tablet and wanted to stock flash it. But the "script" named folder that i put it on the sdcard was for other kind of wonder media processor. I have a WM8505+ procesor and the software was for WM8605. Now the tablet does not turn on, black screen, no sound nothing. I saw on other forums and youtube that i can shortcircuit 2 pins from a Samsung chip on tablet motherboard but it`s not working.
View 1 Replies View RelatedI have a lg optimus 2x and a hp touchpad and the problem is my tablet doesnt suport gameloft games. And my phone does but has a little screen. So i would like to share my lg screen some how wifi and see it on my tablet! Like splash top like you use your tablet as a pc monitor but i want it as a android phone monitor! Is there a app or something? Is for playing mc3 on my tablet doesnt workand on my phone is little and i dont want to use my 82cm tv to big just my 9.7'' tablet
View 2 Replies View RelatedWhen i put my android tab idle it screen turn off(idle mode) internet disconnects i saw there is no power in the dongle(means no light is glowing from the dongle)
What to do my tabs specs are
ICS 4.0.4
Mali 400
allwinner a13 1GHz processor
512 ram
i just bought a tuvva powerplay tablet..aka the game mid....it contains a rockchip 3066 cpu and 4 core gpu 400 ok iv been trying to flash custom roms on this for awhile..i never could..i got it rooted though..well then i heard of this thing called chainfire 3d thats supposed to improve fps...well i installed that tablet turned off...then it booted up with the logo..thats it..nothing more..i can enter the stock recovry..and my computers makes a bumpuda sound like its conntect..all i want to do is delete the dang chainfire thing..but i dont know how..iv tried using adp..
View 9 Replies View RelatedI'm trying to access my tablet Odys Xpress to change the ROM. The problem, after reading several posts on how to do, is that windows 7 does not recognize the driver. Surely it's because I have not activated the tablet's USB debuggin. But change can not access because it has a screen lock pattern type I do not know.how I can remove the pattern lock screen?
View 1 Replies View RelatedThere are apparently at least three different techniques for changing screen brightness in the Android OS. Two of them no longer work post-cupcake and the third accepted technique evidently has a bug. I would like to increase screen brightness at the start of a one-view activity then turn the brightness back to the user setting at the end of the activity. No buttons, no second view or second activity. Just a maxed brightness at start and a return to original brightness setting at the end of the activity. The examples of the current technique using WindowManager.LayoutParams that I have located range from 2 lines of code
WindowManager.LayoutParams lp = getWindow().getAttributes();
lp.screenBrightness = 100 / 100.0f;
getWindow().setAttributes(lp);
To several pages of source code and numerous activities. Is there a simple example of maxing the screen brightness at start that someone can provide a link to?
I know we can write the own lauch APP to replace the traditional Lauch and then we can do everything we want.But now I don't want to do this job and just want to do some simple modifying in the traditional home screen. The "wall paper" is easily to update. However, I can NOT find the the way to update, "Menu" key's background or the Launch screen's background (which contains all the APPs buttons and now it is black) and the other things.
View 2 Replies View RelatedI have a Nexus 7 tablet and every few days I notice a few new apps on the device. I'm not sure if they're full apps or just simply icons to download apps or get more information. I have tried to avoid using them. I know previously I had a couple apps that were sending notifications to the notification system that I considered to be spam. After some research I found out how you can find out which apps are doing it and disable notifications from those apps so that took care of that.
View 4 Replies View Relatedi have a chinese tablet (Teclast P98HD A2Q6) with some very good specs it has 4.1.1 but it's laggy there's another tablet called (PIPO M6) with the same processor and display & it has 4.2.2 with the latest SDK for the chip.can i upgrade my tablet with PIPO's firmware ?
View 9 Replies View RelatedLooking for a simple data toggle I can put on the home screen to turn data on/off with one press. I don't need multiple button for BT, WiFi, Gps because of the touchwiz drop down. Anyone using one with any kind of luck?
View 14 Replies View RelatedCan anyone tell me where i can find a simple screen lock app for my x10?
I don't want anything fancy, nor do i want an app which also locks access to other individual apps on my phone.
All i want is an app which locks my home screen by the use of letters or numbers (like a password i can create myself)
These types of password existed on most if not all moby's in the beginning but i can't find one anywhere.
I would like to make a very simple Android app, with no UI. Kind of a shortcut. I tried searching the web, and I didn't find what I was looking for.
The question is: Can I make a simple app, that only launches an activity?
I want to make an app to launch the following activity : "com.cyanogenmod.trebuchet.preference.Preferences" . Kind of how the app "QuickShortcutMaker" works.