I've question about FW Eken T01A. It's possible to put FW from tablet W70 on Eken T01A? I ask because yesterday I saw vid on youtube (this one [URL].... ). It's look faster than default FW T01A.
Or another, how I can get this win8 laucher? She said on this vid it's apex but I search win8 theme and nothing like this...
View 1 Replies
Is CWM available for the Eken T01? I have posted this question several times on other boards and never got an answer either way. I just got this tablet and I have rooted it. However I would really like to make backups with CWM like I do with my phone because it has saved my butt more than once
View 9 Replies View RelatedI have had an EKEN T02 tablet for one year now. For almost one month every time I switch it on there is a straight line running through my screen.
Sometimes it is green and thinner and sometimes it is grey and thick. As my screen keeps working it gradually fades away but it never disappears.
My brother has an eken T02a tablet and recently i installed root explorer on it and my brother was playing with it and deleted /system and now it is not booting crying: there is a bootsplash screen but no boot loader and i dont know how to access recovery on this tablet.
View 6 Replies View RelatedI've just got a Eken T01 Tablet bit of a bargain to be honest :) Anyway.....
I would like to add a usb gps driver to it. Now from what I understand I need a few things.
1. USB Host
2. USB Linux Drivers
3. Root
I have all three and the driver is a PL-2303 USB to Serial Driver. From what I can gather I need to put these c.
files into a specific folder on my tablet and then edit a couple of files to load these drivers on startup ?
Am I going down the right root ? or completely off the mark ?
I've tried to do alot of reading but not getting far really because most tablets either have built in gps or they dont normally have a host usb port.
Linux Kernel 2.4.31 and above already includes built-in drivers for PL-2303H, PL-2303XA/HXA and PL-2303HXD.
NOTE: Google Android OS is also based on Linux kernel so it also supports PL2303.
does that mean it already has a driver installed and I'm just missing something ? How would I check ?
So my pixcom tablet went bootloop and i flashed it ,it all went well until the flashing process, the progress bar show 15% and went 0% percent again. have tried all technique posted in the web but won't work. have tried all the Livesuite ver. (1.5-1.7). fail.what should i do?
View 1 Replies View RelatedI have a Nexus 7 tablet and every few days I notice a few new apps on the device. I'm not sure if they're full apps or just simply icons to download apps or get more information. I have tried to avoid using them. I know previously I had a couple apps that were sending notifications to the notification system that I considered to be spam. After some research I found out how you can find out which apps are doing it and disable notifications from those apps so that took care of that.
View 4 Replies View Relatedi have a chinese tablet (Teclast P98HD A2Q6) with some very good specs it has 4.1.1 but it's laggy there's another tablet called (PIPO M6) with the same processor and display & it has 4.2.2 with the latest SDK for the chip.can i upgrade my tablet with PIPO's firmware ?
View 9 Replies View RelatedSo awhile back my tablet was acting up and being slow. So I held down the power button to reboot it but when I try starting it back up again it goes through the normal process up until a black screen with the word android that is in blue and is flashing. It always stops here. Also whenever I plug it into my computer it just says that there is no driver found I have a MID M9000 9" Android 4.0 Capacitive Touch Tablet PC - 1.2Ghz, 8GB, 512MB, Wi-Fi (White) The picture is where the screen is stuck
View 3 Replies View RelatedIt does not load past the android screen despite being plugged in for several hours. I have held the power button down, tried resetting it and pressing various other combinations of buttons at the same time. I put an SD card in it.
Android OS 2.2
Kernel 2.6.32
Build Number V1.5.2
I'm having an issue with my tablet, an Onda VI40 Ultimate. It was left off for a day or two, and when I plugged it in yesterday I got the battery screen, but it was in orange and showing that it needed to be charged. I figured I'd leave it alone for a few hours, then come back to it.
I left it plugged in for four hours, but when I came back to it the tablet is just giving the same message. I took out the charger, plugged it in again and got the same screen. I plugged it into my desktop pc via usb cable, and it just gives the same screen over and over. I got another charger, one exactly like it, and plugged it in. Same screen again. I pressed the reset button, same screen. I tried holding down the power button and volume up button, but no deal. I have the latest CM9 build installed on it, with ICS 4.0.4.
I have included below a terribly blurry photograph of what I'm seeing when I try to turn it on, or do anything with it. The tablet just never seems to charge no matter what I do, nor will it boot in any way.
Thinking about getting the moms a tablet for Christmas. Loving the reviews of the Asus Transformer but my original plan was getting her a 4G device so that she can use it even when wifi isn't available. Just wanted thoughts and opinions from those who have had experiences on either end and any recommendations.
View 5 Replies View RelatedI've seen a video in youtube that a person installed win 8 on his a13 tab ..... Is this possible ? if yes , how ?
View 1 Replies View Relatedselling right now tablet and return to factory state works not. still remain files in memory.
while tablets havent numpads?
Does Android 4.1 allow a device to serve as a Hands-Free Profile (HFP) device? Similar to the way many newer cars come with integrated Bluetooth/HFP, I would like to use my tablet (Nexus 7) as a front-end for my phone. When an incoming call comes in, the phone should relay the call over Bluetooth to the tablet; it should also allow the tablet to make outgoing calls via Bluetooth over the phone's network.
I am not interested in solutions such as GrooveIP, Talkatone, and SIPDroid. I am specifically looking for Bluetooth HFP.I wouldn't mind looking into developing such a product - but I first wanted to know if the HSP 1.6 host API was available in Android 4.1. I've seen resources stating it was available in ICS 4.0, but I believe this is to allow Android devices to connect to third-party HSP devices - I'm looking to do the opposite (i.e. have the Android device serve as the HSP host).
I bought a tablet without a name. I would like to install CWM to make a backup of the rom. How do I do? Rom Manager says: device not listed above The tablet is already Root
Phone model: TAB950
Brand: DJIX
Hardware CPU: sun5i
CPU model: ARMv7 Processor (VFPv3, NEON)
CPU frequency: 30 ~ 1200MHz
Screen resolution 800x432
Screen density 160dpi
Render GPU: Mali-400MP
Android version: 4.04
Kernel: Linux version 3.0.8 +
I have a no name i7 tablet. M799ca 2.3.3 rooted (superoneclick). I've been trying to put clockworkmod recovery on it with no success due to noT knowing the exact model of my tablet. I need to know how to put some kind of recovery on this so I can flash a new kernel on it. The one I have won't let me over clock the processor.
View 1 Replies View Relatedfind a compatible rom for my tablet. I would like to upgrade honey comb to ics or jelly bean. I don't want to just download any version of rom. Where can I download the rom.
Here are the specs Description
nVidia Tegra 2 1Ghz
1GB DDR2 RAM
16GB Flash Storage
10.1" (1280 x 800) Capacitive Multi Touch LCD
mini SD Card Reader
5.0 Mega Pixel Webcam
Wifi
BT
G-Sensor
HD Audio
Microphone
3G 7.2 MBPS
Micro HDMI out
Micro USB 2.0
Battery life : Up to 8 Hours
Andriod 3.2 (HoneyComb)
how to root HCL ME Y2 tablet?
View 9 Replies View RelatedI have an Ematic tablet, which I got around Halloween. Basically, it's worked fine since then. Though, for the last week, it hasn't charged or turned on. There's no damage to the AC adaptor, and I've never had problems with it charging before. Now, it only "charges" (even though it technically isn't) in certain places.
Model number : EGS109BL
Link to the tablet : Ematic Edan XL 9 inch Tablet with 8GB Memory EGS109BL - Best Buy
I was getting this cheapo tablet ready to sell and wanted to reset it to factory settings but there was not an option to do that in its settings so I found "format internal" and without even thinking selected that. Well needles to say I can no longer start it up. This tablet has no model number on it, not even in the instructions.
Nexus 7 using Android Central Forums
How to provide work instructions on tablets.
Basically, I want the user to ONLY be able to use a .pdf reader app on a tablet to view instruction manuals. That's it...no other apps will work.
Is it possible to disable ALL other apps that are installed on a tablet?
I have never even heard of the make and no software comes with the device. It's a so called "Asteroid" tablet which will not get past the boot screen! it just gets stuck on the android logo with the dots going up and down the space ship. He said it worked for one day and then it broke. It does look very similar to the generic ones being sold on other websites and are just called "7 Inch Android 2.2OS Tablet with WiFi and Camera".
P.S:
android 2.2
Kernel:2.6.32
build:v1.5.1
I want to install a new rom to my android tablet.There are necessary instructions and files.One of the files are rockchip batch tool v1.5 and other is a disc image file named rom.
It says
1- load the drivers
2-select the img file (rom) in batch tool
3-install it to device by clicking restore.
Is this enough or should i delete the rom that is already loaded in my tablet.Like when we format the old OS in computers?
My tablet uses android 4.1.1
I have a Verizon USB modem. Is there an android tablet I can buy that will work with my USB modem? I would rather not get an embedded 3G/4G tablet. I want the functionality to be able to use the USB modem in my current Windows laptops as well.
View 2 Replies View RelatedA friend has been trying to watch a streaming religious program on her android 2.3 tablet. I thought maybe she needs flash. Google Play store says the newest version is incompatible so I found version 11.0.1.153 on iapktop. Downloaded it to pc and transferred it via usb to tablet. It asks if I want to install and appears to be installing for about 20 seconds and then orange triangle with exclamation point and "Application not installed". Watcanadoo?
View 6 Replies View RelatedI have my contacts in Outlook and Thunderbird and needed to get them onto my Acer tablet. After a LOT of messing about I downloaded E-Z Contacts from here
E-Z Contact Book - Free download and software reviews - CNET Download
and Contacts <-> Excel from here [URL] .....
Both free, if you already have Contacts <-> Excel get the latest version or you'll lose the addresses.
You can import into EZ directly from Outlook. With Thunderbird you have to export in CSV format and then import the CSV file into EZ. You have to manually match the fieldnames between EZ and the CSV file to make sure everything goes into the right place.
Once in EZ you export the data in Google CSV format and copy the file to the SD card of your device.
Next step is to use Contacts <-> Excel, just select "Import", > SD Card > Select the file from the list > Select the account you're importing into and then GO.
EZ can be used to sort your contacts into groups, edit contacts, get the map for your contact, email them, open their website and set up a Skype phone call.
I now use EZ all the time rather than Thunderbird & Outlook &c it means I can change my default email client without having to update contacts. I also store bookmarks in it so I can easily swap to another browser.
I just got a Arnova 10D G3 and it doesn't boot. All I get is the "Arnova" logo on a black screen. I bought it on a refurbished condition, it was a pretty good deal so I am ready to do any risky procedure to make it work since I don't have much to lose.
I downloaded the latest firmware from the official website but I am unable to use it because I can't access the recovery mode.
How can I make it boot?
I am now able to access the recovery mode (power + vol up) but the tablet keeps rebooting after loading this mode. I don't even have a menu.
My problem is my computer stopped recognizing my tablet as a removable device through the USB cable. I've tried every solution, like going into device manager uninstalling all the usb drives etc... I even downloaded a program to see all the usb connections. Still nothing. There is no problem with my USB ports because I can charge my tablet through USB but my PC just doesn't pick it up. I've changed the MTP and PTP settings as well.
I'm pretty sure it started after I paired my tablet to PC over bluetooth. I think that's what caused the problem. Maybe my PC want's bluetooth to trump the USB connection (even with bluetooth turned off on my device)? I tried google searching but I'm not having much luck.
I tried my wifes laptop and hers picks it up, so I've narrowed the problem to my PC.
I plan on buying a car in a few months, and I have this grand dream of replacing the radio/nav stuff with a connected Android tablet, probably the Tab 7.0+ on TMo. I'd have Google Maps and all my music with Google's Car Home interface resting right in the dash.
View 8 Replies View Related