General :: ADB Rejected Connection To Client
Sep 26, 2012
I have a nasty problem with the adb and my Galaxy Nexus (CM10 nightly-20120926). The ADB seems not to work properly. Every time I start my app within Eclipse it gets installed on my Galaxy Nexus and the LogCat window show some output. So far so good. But suddenly ADB stops writing messages and the "Console" windows shows a lot of messages like:
Code:
[2012-09-26 21:01:15 - DeviceMonitor] Adb rejected connection to client '2930': closed
[2012-09-26 21:01:15 - DeviceMonitor] Adb rejected connection to client '2459': closed
[2012-09-26 21:01:15 - DeviceMonitor] Adb rejected connection to client '2459': closed
[2012-09-26 21:01:17 - DeviceMonitor] Adb rejected connection to client '2610': closed
[2012-09-26 21:01:17 - DeviceMonitor] Adb rejected connection to client '3079': closed
[Code .......
From now on the ADB does not output messages any longer. I have to reconnect my Galaxy Nexus to my USB-Port to restart the debugging.
And some messages I generate by using "System.out.println();" are never displayed also!
My onCreate() method looks like
Code:
@Override
public void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
setContentView(R.layout.activity_main);
System.out.println("ON_CREATE!");
[...]
But "ON_CREATE" will never be displayed!!
View 1 Replies
Jun 5, 2013
debugging an application from the new enviroment Android Studio. When i press the debug logo, it installs on my device successfully, however i get this message constantly from the ADB Log (DDMS): "DeviceMonitor: Adb rejected connection to client '19322': closed" thus i cannot debug.
I have tried rebooting PC and rebooting device several times.I'm running Avast AntiTheft which has an option to prevent USB debugging, but that one is disabled.
View 1 Replies
View Related
Dec 1, 2012
I'm trying to set up a VPN connection between a Linux Mint 10 PC (server) and a Nexus 7 (client).
All I'm getting so far is a "Connecting" status from the Nexus 7, followed after a few seconds by a "Disconnected" one.
As it is my first attempt at setting up a VPN (both on the server and client sides) I was wondering if there was a log file generated by Android on the Nexus that would give me a clue as to where I'm going wrong.
A similar file on the server side
View 3 Replies
View Related
Dec 15, 2013
I was running Android 4.4, rooted and CWM installed. Got a notification for 4.4.2 update being ready (like, a week after upgrading to 4.4), and tapped it. Phone reboots into debug mode to install it, but then CWM starts yelling at me saying this zip I'm trying to install is unsigned.
So I stop the upgrade. Phone reboots back into Android 4.4 and I don't get the update notification icon again.
Two questions:
- will I get the update prompt again? if not, can I do it manually while keeping all my stuff like happened on the 4.4 upgrade?
- is the Android 4.4.2 update really unsigned? is there a danger in accepting it?
I'm not sure what to do now since I didn't have CWM flashed when I did the upgrade to 4.4, which went completely smooth.
View 1 Replies
View Related
Feb 19, 2009
I guess it is a old issue, and I have googled the related message in the group, and I think I do not miss anything: 1. I made the MD5 fingerprint of the SDK debug dertificate by keytool, and I applied the maps api key, refer to //code.google.com/android/ toolbox/apis/mapkey.htm 2. I added the apikey into my layout xml; 3. I added <uses-library android:name="com.google.android.maps"/> into my manifest xml;
but I still met this error, btw ,I have set the http_proxy in setting table, and I can use browser to visit network. has somebody succeeded to get a map on emulator other than device? could you give me some tips about it?
View 3 Replies
View Related
Feb 4, 2010
This is so wierd, i got this error: ERROR/MapActivity(258): Couldn't get connection factory client
everything worked fine, it's all of a sudden, how come that happens?
i know my api key is fine, coz one month Ive been using it perfectly.
how come all of a sudden it doesn't show me up the map activity, and posting that error in the logcat?
View 1 Replies
View Related
Feb 23, 2010
I want to connect to a server using ssl/https connection. During handshake between client and the server, I want to have server certificate authentication as well as client certificate authentication. The server certificate authentication is successful. But I don't know how to send client certificate to server for authentication, during the handshake.
View 4 Replies
View Related
Jun 21, 2010
I'm trying to open tcp connection between android (emulator) and PC. I'm trying to create a new socket and then it crash. the line where it crash: Socket s = new Socket("10.0.2.2", 27015);
View 2 Replies
View Related
Jul 27, 2010
i am new to android and need simple http connection codes for client server(local server in the network) communication in android application.the connection starts when the application is started and if there is any update in the server it should be notified on the client and the server response must be based on the client request.
View 1 Replies
View Related
Sep 3, 2012
I use Sony Ericsson Xperia Pro MK16I. (Rooted, Bootloader unlocked).
Recently I had issues syncing contacts with Google, Fb etc and I had to do a factory reset of the phone. Since then I've following issues so far.
1. Incoming calls are getting rejected automatically
2. Silent, Flight mode are missing when I press the power button
3. When I'm in some application and if I press the Menu/Home button, it does not take me to the home screen and nothing happens
4. Windows can't detect or install the drivers for the phone, even if I do it through the 3rd party sources windows still doesn't show it.
View 2 Replies
View Related
Feb 10, 2010
I keep getting
ADB rejected shell command (ls -l /data):
And the command prompt when running adb shell tells me error: device not found although the emulator is open.
View 1 Replies
View Related
Oct 26, 2009
I have just received my second Galaxy handset as replacement from O2 after returning the first with what appeared to be some sort of hardware fault that caused calls to be rejected before pickup quite often just at the moment of touching the phone! I was quite happy with O2 and the way they dealt with the situation and couldn't wait for the new unit but sadly it has arrived with the very same issues as the last one and O2 are again confident that its a hardware fault and now want me to choose some other phone!
View 49 Replies
View Related
Jul 2, 2010
A few times, when I've received a call when my phone's been in my pocket, I've accidentally rejected the call when removing the phone from my pocket i.e. I've inadvertently made the screen gesture that cancels the call. Has anyone found a way of modifying the call answer / reject options to avoid this situation?
View 1 Replies
View Related
Nov 16, 2009
Question about Gmail on the Eris Droid.
Has anyone noticed a difference in settings, functionality, or battery life by using the integrated Gmail client as compared to using the Other e-mail which uses an IMAP client??
You set this up at initial startup.
View 13 Replies
View Related
Jun 16, 2012
I'm looking for an Android RDP Client that works with Windows 8 in a home network.
On Win 7 I used the fabulous "remote RDP" app but until now this one doesn't support Win8.
View 2 Replies
View Related
Dec 26, 2012
recently bought a car in CHINA and it came with a Android powered dvd/navigation/fm/player/etc. I have it already connected to a Mobile WiFi over the China Mobile via a USB WiFi Dongle and downloaded some apps. Some apps I use are blocked in china (TuneIn Radio, Pandora, etc), and i'm looking for a way to have a VPN on it.
The thing is that the manufacturer of the device removed the VPN network settings, so I can't connect (or it is absent on the Android 2.3.4 ). is there a way to install some kind of VPN Client on this android? I already have a paid VPN Account and use on my apple devices.
View 2 Replies
View Related
Feb 21, 2012
I wanted to implement the application specific VPN client in android, that is vpn connection once established should be only available to our application and rest of the apps in android device should make use of normal internet connection.
To elaborate my need more, i have an application already which connects to corporate email, files and other data from internet normally but for some security reason we need it to be go through tunnel within our application and access everything within via tunnel basically want we are looking here is security while accessing company corporate network.
Since we are new to something like this we don't have a hint on how to start what protocols to use etc (we are assuming ipsec l2tp for now).
And between we are just looking to send and receive data over tunnel, there is nothing more or need to control computer on the network all we need is to route data through corporate firewall and should support multiple vpn servers such as cisco, microsoft etc. How complex or how feasible to implement it.
View 1 Replies
View Related
Jan 30, 2012
Recently purchased a Samsung Nexus S. The stock email client (not the GMail app), using POP3 will delete mails once they have been downloaded, or when I next sync. Occasionally it will not delete all mails, just some. The option to delete from the server is not ticked and no other clients are pulling from the server, so its not the case that another app is deleting them. To confirm, emails aren't being deleted after say 10 days, they are being deleted within minutes, and I'm only downloading a handful of mails.
View 3 Replies
View Related
Feb 7, 2013
I'm experimenting with SIP/VOIP on my Android device (Galaxy Nexus). I'm using the SIP account settings in the stock dialer app, this works fine for dialing/voice.
The issue is there are no similar SIP settings for the stock SMS client... is this simply a feature that was not added for some reason? is there a technical reason why this is not possible? (other third party clients support it) or can the stock SMS client use SIP and I just can't figure it out?
View 1 Replies
View Related
Apr 26, 2010
Android AMF client library Aftek has extensive experience in developing enterprise Flex applications. We have used BlazeDS extensively and we believe that it would nice to provide all the benefits provided by AMF for Android applications as well. We have developed an Android AMF client library which would enable Android application developers use the same extensively. The Android AMF client library supports remoting and secured remoting. This will allow all android applications to use the existing backend like .NET, Java, or PHP. The implementation is asynchronous in nature providing success and failure callbacks. This allows application to perform other tasks without blocking the application. We are currently performing some performance benchmarking and plan to release our library very soon. We would also be incorporating the messaging feature as well.
Android RTMP client library:Aftek has extensive experience in developing voip and audio/video and media applications. Media applications has a huge market and there would be quite a few people eager to develop the medial applications on Android. We believe that it would nice to provide all the benefits provided by RTMP for Android applications as well. We are developing an Android RTMP client library which would enable Android application developers use the same extensively. Our Android RTMP client library would support some add-ons that would help developers to deliver robust media solutions.
View 3 Replies
View Related
Apr 21, 2013
why I cannot get my email client on my phone (Galaxy S3) to accept Mozilla Thunderbird? Also, I cannot get a new account to work with the basic e-mail client nor Bluebird, G mail, K9, Yahoo and about 4 others. Always, It's says "Outgoing server cannot be authenticated".... I'm using a server thru a Govt. entity....
View 1 Replies
View Related
Oct 3, 2012
How to record the received rtsp video streaming on android client.
I need record the received video by a android smartphone via rtsp streaming (DSS 6) in mp4 or yuv file format.
I can do this using a pc/linux client but i do know how to do this on android.
Also, can an i access a android device using ssh and execute vlc, mobo or mplayer on it? How?
View 1 Replies
View Related
Jun 6, 2012
I have a Galaxy Nexus with Stock 4.0.4 ROM and a Transformer Prime also with the stock ASUS firmware (4.0.3), The company where I work has a mail server that supports exchange (Kerio Connect) At that server I have (because I need it that way) 2 different accounts, I need one of those accounts to synchronize everything; contacts, mail, calendar, and the other one to synchronize only calendar appointments.
If I configure the first account everything works just fine. But, when I configure the second account, I start receiving login errors for both accounts every certain time, the apps shows me the option to update my account credentials and when I do it works for the moment but after a while it fails again. If I delete whichever of the two accounts the other works fine.
I have not tested this scenario against other email servers, so I'm not sure if this a problem with my server or if this is an Android problem.
Both accounts are configured as Exchange accounts from Settings menu.
View 9 Replies
View Related
Nov 8, 2012
My company only allows mobile access to corporate e-mail through WIndows phone. As an Android advocate, i prefer my own mobile device.
My only two choices are to access through my Android Chrome browser or find a way to make my Jelly-bean Android mail app look like it is a Windows phone. ...or a 3rd part mail app that looks like a Windows/windows phone mail client
I prefer the mail client route as it keeps in sync with updates.
View 1 Replies
View Related
Sep 7, 2009
If my screen locks while I have a wifi connection, then the connection is lost when I unlock the phone.First, is this perhaps deliberate, to save power? Also, either way, when I unlock the screen and go into wifi settings, I see that the phone is trying to make a wifi connection, but it never succeeds, even though it's my home network and I'm in the same room as the router. It just states 'Obtaining address.
View 10 Replies
View Related
Oct 14, 2009
I'm using ThreadSafeClientConnManager to manage a pool of client connections, because my application has several threads, which are simultaneously connecting to a webserver.
Abstract sample code:
CODE:..............
Now lets say on of this threads is downloading a large file, but then the user of my application is switching to another activity/screen. Therefor the file is needless and I'd like to abort this download connection.
In ThreadSafeClientConnManager I found this method: public ClientConnectionRequest requestConnection (HttpRoute route, Object state) Returns a new ClientConnectionRequest, from which a ManagedClientConnection can be obtained or the request can be aborted.
So far I've been using:
CODE:.........
Now from what I understand, I've to use:
httpclient.getConnectionManager().requestConnection(HttpRoute route, Object state);
And that's the point where I'm stuck. I assume that for the route I can just use new HttpRoute(new HttpHost("10.0.0.1")) or whatever my server is, but what to put in for Object state?
And second, as soon as I've the ClientConnectionManager I can call getConnection(long timeout, TimeUnit tunit). But then from there, how I do I execute my HttpGet httpRequest = new HttpGet(URL_TO_FILE); as I did before with HttpResponse response = (HttpResponse) httpclient.execute(httpRequest);?
I've been gone through the documentation and tried out quite a few different things, but I wasn't able to obtain a working solution. Therefor any suggestions and/or code examples are more than welcome.
View 1 Replies
View Related
May 12, 2010
Whenever a application needs internet and connection fails, I get a message dialog
Connection failed
This application requires network access. Enable mobile network or Wi-Fi to download data.
and two buttons, Settings, Cancel.
How do I detect there is no internet connection?
How do I popup a same dialog in my application?
View 3 Replies
View Related
Sep 15, 2010
Long time reader, first time poster here. How does one know if the Epic is using the wifi connection as opposed to using the 3G connection? When wifi is connected both that and the 3G connection shows at the top. So which one is in control per se? And how can it be verified?
View 3 Replies
View Related
Oct 27, 2010
I'm coding a very basic FTP client on top of my application and I have 2 activities. The first one is the file explorer and the second one is the image viewer. Once I click on the image filename on the explorer, I want to pass the connection to the other activity to handle extra stuff. Basically, I want to keep the same org.apache.commons.net.ftp.FTPClient object (which handles the connection) alive in-between the 2 activities. I know I can't pass an object inside an intent so I don't know what my best bets are.
View 1 Replies
View Related
Jul 23, 2010
What's the technical term for being able to have voice connection and data connection simultaneously? Like AT&T was promoting heavily for a while.Apparently, the new T-Mobile Vibrant has this capability. A friend got one and was accessing the web while talking to me, double jealous now.I have benn lusting after the Verizon version, Fascinate, and wondering if there is any chance it will as well.
View 2 Replies
View Related