I need to get RUU for my fone type.I tried all RUU who are posted in htcdev.com - noone works.
***UNLOCKED***
BLISS PVT SHIP S-ON RL
HBOOT - 1.33.0000
RADIO - 3831.17.00.17_M
eMMC - boot
Apr 13 2012,10:10:20
View 9 Replies
I installed an RUU with an update utility which fixed a WiFi problem I was having. Everything looked good so I immediately tried rooting with zergrush which seemed to work until my first re-boot. Now the phone is stuck in a boot-loop.
I have two utilities for RUU versions. I've flashed both of them at least three times each but its the result is the same every time. The phone boots normally the first time, then goes into loop on the next restart.
One issue that I noticed that when I re-lock the bootloader in fastboot, I get an error message. It goes something like...
(BOOTLOADER) Lock Successfully....
FAILED (unknown error)
However, when I go back to bootloader, it says **** RELOCKED **** at the top. Maybe whatever is causing the "unknown error" is also interfering with the re-lock procedure. It may not be truly re-locked.
I really just want to get this phone back to stock condition so that it works like it should.
I bought my phone from cyprus (european version), i live in the middle east region; i wanted to add permenant arabic language to my HTC rhyme.
How to add arabic language both written and reading
I've been looking for a custom recovery for my HTC Rhyme (Bliss) and I've tried EVERYTHING!
Clockworkmod recovery, 4ExtRecover, Amon Ra Recovery, etc. There is no option in ROM Manager Pro and there are no custom ROMS for my phone. Even if there was a ROM for my phone, I can't flash any ROMS!!! So, how to build a recovery.
I've been trying to root my wife's HTC Rhyme and in my efforts, something hosed the WiFi. All I get is "ERROR" under WiFi in the wireless network settings menu. This happened to me once or twice on my incredible and a kernel re-flash fixed it. I really want to root it so that she can have the benefit of being able to completely backup everything. I've tried ZergRush, TocoRoot, SuperTool, OneClick, SuperOneClick... none of it worked. The only thing that I've been able to do successfully is unlock/re-lock the bootloader.
Is it possible to extract the ROM and/or all critical system files from a stock rooted phone and use them to restore another phone that is malfunctioning?
I have HTC Rhyme and i installed custom rom on it and now when i want to go to stock rom i can't because i haven't done backup.
When i try to install with RUU it fails.
Any way getting to stock rom or installing custom rom that is okay?
Htc rhyme is not booting up,when i press power Botton it only gives seven vibration and indicator light blinks,thn nothing happens,i have already tried hard/factory reset using volume down botton but nothing changed,also i never rooted my phone,its on orignal frmware.what to do ?
View 2 Replies View RelatedI am Using HTC RHYME and it is showing ''SD card unmounted Unexpectedly as i open gallery files or other videos etc e.g some heavy files...
I have changed sd card but problem continues ...
Is anyone noticing no rhyme or reason as to when Gmail syncs? I'm getting a long delay sometimes. I am hooked up to WiFi at work, but have low cell signal in this area. I looked for a setting to change sync time but didn't find one.
View 14 Replies View RelatedI have a Casio Commando not that it should matter. I've gone to Settings, Language & Keyboard and can't find anywhere there to turn off Auto Correct when texting. I don't mind it suggesting words and then me selecting them but it drives me nuts when I type a word and hit space and it automatically changes the words. How to make this stop, I'm ready to ditch Go SMS Pro and try another messaging App at this point.
View 2 Replies View RelatedIm just making sure im reading that right. When buying retail and it says fully unlocked that doesnt mean the boot loader does it?
View 2 Replies View RelatedI've noticed that when using a flashable zip, the files that are copied over retain the same timestamp as the other files in that directory.
I am using the 'package_extract_file' command through the updater-script. Is there a way to change the timestamp on the files that have been copied over to system folders to reflect the correct time/date (through the script)?
How can i fix usb brick with the correct files ?
View 1 Replies View RelatedI have some doubt about the amount of RAM in my Android device . Not sure if it has 256 MB or 512 MB . I was able to run through a terminal in android : cat / proc / meminfo
Apparently I have approximately 466MB of RAM. If so will I have 512 MB. The question comes because if I run the command "free" or if I see from the above command in LowTotal line, only tells me 233 MB ...
What is the correct information in RAM for my device? I did the same procedure to another cell which mine where I'm more sure of having 512 MB of memory and this is what I get: URL>...The funny thing is that it shows me 584 MB of MemTotal and the same amount for LowTotal. It seems my device, the first , is not using the total amount of RAM available.
I am wanting to create CWM recovery for a device that doesn't currently have it, the EK-GC100 to exact, trouble is I can get it to boot, but because the device doesn't have volume buttons, only "Zoom in/out" the recovery cannot be navigated, what to do, to remap the keys in the recovery to buttons the device actually has?
View 1 Replies View RelatedCorrect ApkTool for ICS and Jellybean for Linux/Mac?
I can't compile using the one from the website as I get compiling errors
My HTC desire 600 is not playing 720p videos correctly. Also there is lagging in recording in low light conditions.
View 1 Replies View RelatedI flashed my Verizon Note 2 (SCH-I605) to the SOKP Rom from a Jedi X Rom (v13 I believe). After the flash, I noticed my network was not working. Eventually I found out that the device was registering as a GT-7105. Not sure what went wrong, as the rom was flashed with no errors. I also ensured that my recovery was on the appropriate version (TWRP 2.6.3.3 in this case) and I also did a factory reset. To try and rectify the issue I wiped the phone and tried various other roms. In every one of those cases I found that the phone was constantly roaming. I had checked my network mode and tried switching between Global and LTE/CDMA which did nothing. Being completely out of options, I just installed to a stock rom through Odin (VRAMC3 4.1.2) and let it update via Wifi to 4.3 and still nothing. (I am well aware of the Knox security feature and will address this in a moment)
Here are the different ways I tried to diagnose the issue after this that led nowhere:
1. Made contact with a Tier-2 specialist from Verizon that tried various diagnostic methods and found that my phone was simply not registering on the Verizon network, or ANY other network for that matter.
2. I went to a Verizon store and got my SIM card replaced.
3. I even went to a repair shop to see if the phone possibly had a faulty connection.
I have already verified that the IMEI is correct based on the sticker behind the battery. The PRL is on 15310. The very last thing I tried was entering "getprop" inside a terminal. I'm taking a guess here, but I noticed my ril.serialnumber was all 0s. If I need to root my phone again to try something, I am more than willing to. My phone is out of warranty and not insured, I'm not really concerned about the Knox warranty trigger unless it will render my phone completely unusable.
I really want to learn how to make good update-script file ,,
EX : what should i do if i want to flash media apps , Conversation & phone book ....?
What is the correct sums ?
I Used Aroma-app tool but i got FC.
Getting MissedIT! to display the correct unread count for AquaMail? I'm running Nova Launcher on my gorgeous Galaxy Note 3, and also have TeslaUnread installed. While TeslaUnread will correctly display AquaMail unread counts, it doesn't support the display WhatsApp unread counts. MissedIT! will do both, but for the life of me I can't get a true unread count in AquaMail.
View 1 Replies View RelatedI've got a 3TB external drive drive hooked up to my Ouya running CM11 (Android 4.4)
I run Nzbget and Transmission in optware, and use CM primarily as a vehicle for XBMC so I need the space.
I had it in 2 ext4 partitions which needed a init script to mount under the stock OS.
I was hopping to get it working in a less hacky manner under CM.
I tried with the two parts, and no go so i redid it with one big partition with root as the UID and sdcard_rw as the GID.
Still no dice. I can access it in File Manager with elevated permissions, but no go in XBMC or other apps.
Also tried one big exFAT partioning with no luck.
I plugged in an 8g ntfs drive I had and it automounted it no problem.
What is the right way to configure the drive? We're a Linux household so sticking with ext2/3/4 would be ideal. NTFS I would like to avoid.
I am a Linux enthusiastic and now using the most awesome mobile operating system Android ICS.
My mobile phone is Sony Ericsson Live with Walkman wt19i. Recently I installed CYANOGEN MOD 9 which I think the best available rom from the performance perspectives.
But one problem popped out.
The problem is this Rom can't render Indic languages well.
The fonts are not perfect.
The encoding is set to UTF 8, but still it can't render the BENGALI LANGUAGE LIKE THAT OF SONY ERICSSON STOCK ROMS.
I like to add addresses to my phone book in Android. As a lot of my contacts live in buildings i also like to add the floor and apartment number to the address: Looking like that:
Street and Number, Floor and Department number
Town, zip code
State
Country
Example;
Av. Whatever 12345, Floor 5-A
Buenos Aires 1007
Argentina
When clicking on the address the GPS of my wish opens , finds the country, city but not the street because of the additional Floor and department information. Without this additional information everything well with Google Maps or Sygic.
So, how should i add this additional Floor and department information to my address without the GPS has problems to find the main location.Also from ICS on there is only one filed to add the whole address not as with Gingerbread where you had a field for street, city, etc.
I loaded Quadrant Standard and under system info it shows my cpu as a ARMv7 Processor rev2 (v71) is this the same as a snapdragon cpu?
View 1 Replies View RelatedI was texting some friends and typed (gotmy stuff for free....) as you can see I forgot to put a space between got and my. well, the auto correct gave me a little surprise. try spelling gotmy in your evo and see what you get. you will see how things could go very wrong if you're not carefull.
View 19 Replies View RelatedI live in Portugal and bought my HTC Legend for about 2,5 months with no carrier (not rooted). For the last month I moved to Spain to work, and I'm having some trouble with the hour mechanism on the phone. I've set the phone clock to the correct time and Time Zone (GMT +1). But since the SIM card is from a portuguese carrier (Vodafone PT), maybe it is configured has beeing GMT 0.
Well all the time settings are manually configured and I've turned off the automatic settings.
What happens is that every week I must pay attention to the clock, because the phone changes the time automatically to one hour early. I think that this must be related to the configuration of the SIM card, but my configurations are all manual.
Does anyone have a similar problem? can it be corrected or is a known bug with Android/phone?
I am trying to get phone's correct timezone. I tried String newTzID = Calendar.getInstance().getTimeZone().getID(); This is returning "America/Atikokan". But my phone's timezone is EST. Both of these have an offset of GMT -5 hours. But I actually need to differentiate between EST and "America/Atikokan", since "America/ Atikokan" doesn't have day light savings time. Is there a way to get the correct id?
View 2 Replies View RelatedHow to use titanium. Backup. Correctly.?
View 2 Replies View RelatedI know this sounds a bit stupid(!) but is there a 'correct' way to exit applications? If the app doesn't have a specific Exit button, I just click the Home key to get back to the home screen, but when I look in TasKiller, I have quite a few apps still running...
View 20 Replies View RelatedI activated my Incredible yesterday and it played Flash ok. Today the software updated to the latest version and now Flash will not play. What can I do to correct this?
View 4 Replies View Related