General :: How To Know Correct Amount Of RAM On Android Device
Feb 27, 2014
I have some doubt about the amount of RAM in my Android device . Not sure if it has 256 MB or 512 MB . I was able to run through a terminal in android : cat / proc / meminfo
Apparently I have approximately 466MB of RAM. If so will I have 512 MB. The question comes because if I run the command "free" or if I see from the above command in LowTotal line, only tells me 233 MB ...
What is the correct information in RAM for my device? I did the same procedure to another cell which mine where I'm more sure of having 512 MB of memory and this is what I get: URL>...The funny thing is that it shows me 584 MB of MemTotal and the same amount for LowTotal. It seems my device, the first , is not using the total amount of RAM available.
View 3 Replies
Jan 8, 2013
I am wanting to create CWM recovery for a device that doesn't currently have it, the EK-GC100 to exact, trouble is I can get it to boot, but because the device doesn't have volume buttons, only "Zoom in/out" the recovery cannot be navigated, what to do, to remap the keys in the recovery to buttons the device actually has?
View 1 Replies
View Related
Apr 5, 2010
I am trying to write a streaming application.I have my own decoder and I am playing PCM audio using AudioTrack. At any point in time I want to know how much data is buffered with the device. I want to use this so that if the data with the device go below a level, I want to go into a buffering mode where I will buffer 2-3 seconds of data before continuing playback again. Can someone please tell me how to do this?
View 5 Replies
View Related
Mar 5, 2010
I'm developing an Android application in my school department. We are interested in purchasing a Developer Device to have more testing capabilities than the Android emulator has offer. Which one supports the largest amount of platforms? Which one is faster, more reliable?. What should I be looking for?
If you could give me some info about this or tell me some of your developing-on-device experiences.
View 3 Replies
View Related
Mar 16, 2010
I have a probably silly and stupid question. I did the sbf file to bring my phone back to stock (I have to give my phone to a family member, long story). Anyway, when I did the sbf file it recovered all my apps, and one of them was SetCPU.
SetCPU won't run unless it has root access correct? I mean the fact that it was installed (and then uninstalled) it can't change anything without root access to the device correct?
View 4 Replies
View Related
Oct 1, 2010
I am using droidlife's suggestion on how to root droid x 2.2 and when i copy the files to the correct folder and then hit doroot.bat all i get it "searching for device" the drivers are downloaded but when debugging is turned on it wants to download drivers for wb810.
View 6 Replies
View Related
Jun 15, 2013
Mobile possess the Blu Dash 4.0, as in this manual 512MB of memory, thought it strange when I visualized the tab and applications are given 341MB of memory.
View 2 Replies
View Related
Dec 14, 2012
I'm new to Android and have the Nexus 4. I have a question about a music timer. I'm playing/streaming my music through Google Play Music. Is there a way to make it stop playing after a set amount of time, say 1 hour? I can't find a way to make it do that. I bought automate it pro but setting up the rules didn't quite work like I thought.
View 1 Replies
View Related
May 23, 2012
I have a Casio Commando not that it should matter. I've gone to Settings, Language & Keyboard and can't find anywhere there to turn off Auto Correct when texting. I don't mind it suggesting words and then me selecting them but it drives me nuts when I type a word and hit space and it automatically changes the words. How to make this stop, I'm ready to ditch Go SMS Pro and try another messaging App at this point.
View 2 Replies
View Related
Sep 7, 2012
Im just making sure im reading that right. When buying retail and it says fully unlocked that doesnt mean the boot loader does it?
View 2 Replies
View Related
May 16, 2012
I've noticed that when using a flashable zip, the files that are copied over retain the same timestamp as the other files in that directory.
I am using the 'package_extract_file' command through the updater-script. Is there a way to change the timestamp on the files that have been copied over to system folders to reflect the correct time/date (through the script)?
View 1 Replies
View Related
Aug 6, 2012
How can i fix usb brick with the correct files ?
View 1 Replies
View Related
Apr 19, 2014
I need to get RUU for my fone type.I tried all RUU who are posted in htcdev.com - noone works.
***UNLOCKED***
BLISS PVT SHIP S-ON RL
HBOOT - 1.33.0000
RADIO - 3831.17.00.17_M
eMMC - boot
Apr 13 2012,10:10:20
View 9 Replies
View Related
Feb 28, 2014
Basically I have an old iPod touch 2g on iOS 4.x and a Nexus 5.
I want to use my iPod as my media player but I'd like to be able to control music from my Nexus (only basic controls).
Is there an app on either device that allows this? I know tsk skipping can be done by some Bluetooth headphones so I'm hoping there's a way to make iOS accept command from my Nexus
View 1 Replies
View Related
Jul 21, 2012
Correct ApkTool for ICS and Jellybean for Linux/Mac?
I can't compile using the one from the website as I get compiling errors
View 6 Replies
View Related
Aug 3, 2013
My HTC desire 600 is not playing 720p videos correctly. Also there is lagging in recording in low light conditions.
View 1 Replies
View Related
May 19, 2014
I flashed my Verizon Note 2 (SCH-I605) to the SOKP Rom from a Jedi X Rom (v13 I believe). After the flash, I noticed my network was not working. Eventually I found out that the device was registering as a GT-7105. Not sure what went wrong, as the rom was flashed with no errors. I also ensured that my recovery was on the appropriate version (TWRP 2.6.3.3 in this case) and I also did a factory reset. To try and rectify the issue I wiped the phone and tried various other roms. In every one of those cases I found that the phone was constantly roaming. I had checked my network mode and tried switching between Global and LTE/CDMA which did nothing. Being completely out of options, I just installed to a stock rom through Odin (VRAMC3 4.1.2) and let it update via Wifi to 4.3 and still nothing. (I am well aware of the Knox security feature and will address this in a moment)
Here are the different ways I tried to diagnose the issue after this that led nowhere:
1. Made contact with a Tier-2 specialist from Verizon that tried various diagnostic methods and found that my phone was simply not registering on the Verizon network, or ANY other network for that matter.
2. I went to a Verizon store and got my SIM card replaced.
3. I even went to a repair shop to see if the phone possibly had a faulty connection.
I have already verified that the IMEI is correct based on the sticker behind the battery. The PRL is on 15310. The very last thing I tried was entering "getprop" inside a terminal. I'm taking a guess here, but I noticed my ril.serialnumber was all 0s. If I need to root my phone again to try something, I am more than willing to. My phone is out of warranty and not insured, I'm not really concerned about the Knox warranty trigger unless it will render my phone completely unusable.
View 9 Replies
View Related
Apr 14, 2013
I really want to learn how to make good update-script file ,,
EX : what should i do if i want to flash media apps , Conversation & phone book ....?
What is the correct sums ?
I Used Aroma-app tool but i got FC.
View 1 Replies
View Related
Oct 11, 2013
Getting MissedIT! to display the correct unread count for AquaMail? I'm running Nova Launcher on my gorgeous Galaxy Note 3, and also have TeslaUnread installed. While TeslaUnread will correctly display AquaMail unread counts, it doesn't support the display WhatsApp unread counts. MissedIT! will do both, but for the life of me I can't get a true unread count in AquaMail.
View 1 Replies
View Related
Apr 25, 2014
I've got a 3TB external drive drive hooked up to my Ouya running CM11 (Android 4.4)
I run Nzbget and Transmission in optware, and use CM primarily as a vehicle for XBMC so I need the space.
I had it in 2 ext4 partitions which needed a init script to mount under the stock OS.
I was hopping to get it working in a less hacky manner under CM.
I tried with the two parts, and no go so i redid it with one big partition with root as the UID and sdcard_rw as the GID.
Still no dice. I can access it in File Manager with elevated permissions, but no go in XBMC or other apps.
Also tried one big exFAT partioning with no luck.
I plugged in an 8g ntfs drive I had and it automounted it no problem.
What is the right way to configure the drive? We're a Linux household so sticking with ext2/3/4 would be ideal. NTFS I would like to avoid.
View 1 Replies
View Related
Sep 2, 2012
I am a Linux enthusiastic and now using the most awesome mobile operating system Android ICS.
My mobile phone is Sony Ericsson Live with Walkman wt19i. Recently I installed CYANOGEN MOD 9 which I think the best available rom from the performance perspectives.
But one problem popped out.
The problem is this Rom can't render Indic languages well.
The fonts are not perfect.
The encoding is set to UTF 8, but still it can't render the BENGALI LANGUAGE LIKE THAT OF SONY ERICSSON STOCK ROMS.
View 2 Replies
View Related
Apr 9, 2009
I am trying to place only the exact amount of data into a TextView but I need to know how much it can hold. Is there a way to do this based on it's height, width and the textsize?
View 2 Replies
View Related
Jun 5, 2010
Well this is really a two question thread, I'm new to Android.
1) Which multi-protocol (AIM, Facebook, MSN, etc) client eats the least amount of battery?
I downloaded Meebo and it seems pretty good (heard eBuddy is worse in consumption), I'm wondering if there's anything better.
2) Does GTalk consume the least amount of battery since it's integrated with Android in comparison to third party clients?
As of now I don't have any friends who use GTalk but I'm trying to convince a few to get it.
View 7 Replies
View Related
Dec 23, 2009
The database of my application need to be filled with a lot of data, so during onCreate(), it's not only some create table sql instructions, there is a lot of inserts. The solution I chose is to store all this instructions in a sql file located in res/raw and which
is loaded with Resources.openRawResource(id).
It works well but I face to encoding issue, I have some accentuated caharacters in the sql file which appears bad in my application. This
my code to do this : Code...
The solution I found to avoid this is to load the sql instructions from a huge static final string instead of a file, and all accentuated characters appears well.
But Isn't there a more elegant way to load sql instructions than a big static final String attribute with all sql instructions?
View 4 Replies
View Related
Oct 17, 2010
I would like to limit my messages per person to 300 or so, not limit the total number of my texts, or by date. Anyone know of an app for this? Some of my conversations come up extremely slow on the stock messages app due to nearing k messages between that person and myself. Using a Hero if that matters.
View 6 Replies
View Related
Nov 3, 2009
From one activity, I want to pass a lot of data (about 1MB of Strings).I tried sticking it in Intent.putExtra(ArrayList<String>), but if I put in too much data, I get "FAILED BINDER TRANSACTION".What's the easiest way? I don't want to publish a service, or use the file system. I really want a pipe that can write data from one end and read it from the other end. I can handle the case where the starter Activity dies while the "startee" activity is trying to read from the pipe.
View 6 Replies
View Related
Jun 26, 2010
I will be making a mobile application in Android. My application is like Google Map's Get Direction feature, but a lot more complex, so I need to store data about points in the map. So I'm worried that SQLite may not be able to handle these large amount of data(or considering the limited storage of the phone). I have no background in SQLite so please bear with me.
View 3 Replies
View Related
Aug 27, 2010
Is there a way to set google checkout to pay us only after our balance surpassed a certain amount?
I want to be payed when I have earned at least 100$, I can't see dozens of transaction on my bank for only 2$...
View 14 Replies
View Related
Aug 15, 2010
I have a Hero on contract with X amount of free mins, unlimited texts and X amount of internet. If I'm sitting in my house and connected to wi-fi through out router does this come off my X amount or not.
Logic says I'm not using the airtime supplier to connect so it doesn't count but something is just niggling in the back of my head saying "watch it".
View 2 Replies
View Related
Nov 26, 2010
I have 2 email accounts that I check on my Samsung Captivate, and I'm having problems with both of them. When I click the Email icon and view both of these accounts, one account shows -1/1 messages and the other shows -1/25 messages. If I get on Yahoo and Gmail and check they show the correct amount. Yahoo has showed this for a few days, and Gmail just started today.Can anyone tell me what is wrong and why they show a negative amount of messages?
View 1 Replies
View Related
