Looked around didn't see anything here, but when I hook my DX up to my computer through USB it will vibrate saying it was hooked in, but it will not charge or show up on my computer at all. What am I doing wrong?
View 1 Replies
I have a feeling my problem is the router and not my Droid, but I thoght I would try anyway.
I have 2 networks that I conenct to at my work. An open network and a secure one.
The open network, which has weak signal, I have no problem connecting to.
However, when I try to connect to the secure network, which i have great signal, I get "Disabled, secured with WPA/WPA2 PSK". I am positive I have the right password.
The strange part is I have had my Droid for less than 2 weeks. Before I had an Eris and would connect to that network everyday without any problems. But have never been able to connect with my Droid once I dont think anything has changed with that router, but i cant say for sure.
Any ideas as to why the Droid wont connect? Unfortunately, i dont have access to the routers settings. Unless I really had to, i can try to access it early in the morning
tried usb debugging tried it off.. when i plug it in nothing will pop up that will say it is. it will charge.. but thats about it. it wont let me change from pc mode to mass storage.. upgraded drivers.. tried Motorola media link.. tried turning it off with the sd card unmounted.. tried removing the battery.. did a hard restore. i tried on 3 computers in my house. nothing seems to be working out. all i want to do is put a video from my phone to my pc.
View 4 Replies View RelatedWhen I connect my Droid X to my PC, the V Cast Media Manager web page opens up in IE. How can I prevent this?
View 3 Replies View RelatedI have been rooted since February and up until i bought a new laptop everything has worked great when running adb commands. But one day, after I bought a new laptop, it would not recognize that my droid was connected. So I did some research and one solution I saw was to disable debugging, I did and that and it worked. But now I cannot run any adb commands(error: device not found). I have tried uninstalling and reinstalling the usb drivers but still that didn't fix the problem.
View 9 Replies View RelatedI made a post about this in the Froyo 2.2 features I was not aware of thread, but am making a new post here - just in case it is because of something else, like, say, the baseband update.According to DROID by Motorola - Android phone - Motorola USA I have wireless B,G connectivity.However, my DROID is currently connected to my wireless N router, which it can now see since I switched said router from the 5.8 GHz band to hte 2.4 GHz band.No, the router it not provisioned to supply N and G - it is supplying N only.
View 11 Replies View RelatedI have notice blockbuster is on the droid 2. I was woundering if its possible to connect the droid 2 to a tv and watch movies that way?
View 4 Replies View RelatedIs anybody else having issues using the new winamp to stream music into your phone?I cannot seem to connect the phone to the PC or vice versa. Basically the last step is to hit 'start discovery' on the winamp program on the PC, then I should get a message on my phone to connect, but it doesn't do that.
View 1 Replies View RelatedYou are all likely going to laugh at this, and I admit, you have every right too. For the first time today I am trying to enable the wifi on my droid when I am at home and have been unable to get it to work.
I turned it on, connected it to my home Wifi, used the correct password, and it says it is connected, and has been assigned an IP addressed. However, it isn't connecting to any websites or anything else in any of the browsers.
I have tried both the native and dolphin.
I'm rooted and have loaded UD 1.0. I am now having a problem connecting to my exchange server. Same settings as before I rooted, but can't connect.
View 6 Replies View RelatedHere's the deal. Downloaded Motorola Media Link. I open it up select connect so I can connect my Droid to my pc ofcourse. This is were the problem starts to occur. When I select connect it tells me 1 handset found being my droid. I do mount the phone from the notification bar and always end up with detection failed. I have the option to click here to learn more and all it tells me is make sure you mount your phone. Any suggestions.
View 2 Replies View RelatedWhen I turn on wifi it won't connect to my remembered network unless I go into wifi setting. Anyone else having this problem? Also when I get a call the bluetooth button on the bottom left won't turn bluetooth on. I guess it just tells you if its connected but it really should turn it on and connect.
View 6 Replies View RelatedWhen I first got my X it allowed me to manually choose to connect to wifi but lately it just auto connects and I cant turn it off if im in a wifi area. This puts a huge drain on my battery. I'd prefer to have the OPTION to connect to wifi if/when i want to and to use the 3G network otherwise. Any idea how I can address this issue? (I did recently install Launcher Pro. Not sure if that has anything to do w/ it but figured id mention it)
View 3 Replies View RelatedWireless tether works with NexBeast 1.1 and wired tether works on my work laptop, but it will not connect on my new little netbook. I have reinstalled the Moto drivers a few times.
View 25 Replies View RelatedI have a good WiFi connection, but my browsing seems like it is going over the cellular connection. How can I force it to go via my WiFi, or can I? It just seems very slow, no different from being in the car.
View 5 Replies View RelatedAnyone else's droid just not do anything after selecting "connect" in the wireless settings screen? mine just scans and scans and then fails.
View 5 Replies View RelatedI'm not sure if it's the phone or the bluetooth headset that's doing it, but whenever they connect, the phone will redial the last number.(no buttons pressed)
View 2 Replies View RelatedMy mother and I paired my droid to her blackberry. We then tried sending pictures back and forth. When she sent to me, everything worked fine, but every time I tried to send, it give an error that it cannot connect.
View 14 Replies View RelatedI just cant seem to get a debugging connection though PC mode on my droid X to connect to the computer. I can in Mass storage, but when I click on Pc mode it turns it off. I am just trying to root right now and I have 2.2 and just lost root.
View 11 Replies View RelatedAnyone have an issue with the droid going into silent mode after connecting it and then disconnecting it from the usb charger. I found that I have to manually take it out of silent mode each time.
View 2 Replies View RelatedI searched the threads and haven�t seen any one mentioning this. Whenever I try to connect my Facebook via the motoblur it gives me an internal server error. I tried a factory reset and also connecting through the social networking and my accounts to no prevail.
View 4 Replies View RelatedAnyone have a problem connecting to a network with a hidden SSID? My wife can connect to our router fine with her Droid INc (wireless N router). But i can't unless i enable broadcasting the SSID. I found the hidden SSID enabler app, and going to try that. If that doesn't work does anyone else have any ideas? If i enable SSID broadcast i connect right away. If i disable it, i lose the connection and it is "out of range". Very annoying as i live in a condo unit with 10 other wifi networks in my range. Would like to keep my netwrok as private as possible.
View 17 Replies View RelatedThis is a silly issue, but its now driving me to distraction, My Jawbone pairs & connects without an issue, however I have a Nokia6822, & Blue & Me in my car, the Milestone will pair but not connect to either of these devices ( phone is on V2.1) even after entering verify code on each device ( The car generates a unique code for each device to be paired with it). Also the make device discoverable is only open for 120 seconds, is there a reason for this ?
View 1 Replies View RelatedI got a Droid X for development, and after setting it up just like all my other test devices, it showed nothing when I ran "adb devices". When I plugged it in each time, OS X complained that it could not connect to the mass storage device. How can I fix this, and connect my Droid X to OS X for development?
View 2 Replies View RelatedDid a search for this and couldn't find anything. I'm trying to connect my phone to my Macbook via bluetooth and, although it is paired, it won't connect. any special software I need for this?
View 1 Replies View RelatedI have a situation which I will try to explain clearly. I have two services, Service A and Service B.
Activity C connects to service A using onBind(). Service A connectes to Service B using a callback object. I want Service A's onbind to not be executed until Service B is connected to Service A. What will be a good way to achieve this?
When I plug my phone into my computer via USB, nothing happens. I don't get a notification although the phone charges which means it is plugged in. But as I said no notification so I can transfer things between my computer and my phone. Any ideas anyone? I'm running 2.1 V2 and this just happened as of today. It was working fine yesterday.
View 8 Replies View RelatedI had installed the "quick settings" app that was mentioned in another thread. When I tried to open it this morning to turn on the mobile network (I usually keep it off at home), a message popped up saying the application was not updated properly and it needed to be removed and reinstalled. I tried to go to settings>wireless controls to turn on the mobile network but that isn't working either. When I look at the button to turn on the mobile network in the settings, it says "standby to connect to mobile network", I click it, it goes away and says "connect to internet" but when I click it again it just tries and then stops after a minute or so. I removed the quick settings app and restarted the phone, but that didn't help.This happened once before and I just connected to WiFi and reinstalled the quick settings app, but now I'm somewhere where I don't have WiFi access. If it matters, I also have a shortcut button installed to turn the mobile network on and off, but that isn't doing anything either. Any suggestions?
View 22 Replies View RelatedUsing the browser, I am trying to access my companies intranet homepage.When I try to access the link, it usually presents a pop up login box but using the Eris it dows not. I get a page "You are not authorized to view this page" web page..Anyone else have this issue? Is this a limitation of Android? I've tried messing with all the settings and still nothing. No way to Log Into the page.I've even tried using Dolphin Browser, same thing.I believe we use Microsoft Sharepoint and other microsoft back end products
View 10 Replies View RelatedI just got the 2.1 OTA yesterday morning. I was one 1.5 and it loaded up without issue. A couple of quirky things to work out, but then again, there are so many more setting and functionality with 2.1.
The update broke my existing link with my BT headset. So I went in and and set it up again. I got them to "pair" but I can't get it to "connect". Does anybody have any ideas here?
BTW, my wife has an Eris too. She's a second line on my contract. She still has not gotten the ota update yet. So it appears to be totally random who it's being pushed to.