I am following the instructions on the stick from the complete root guide... and i get the the unrevoked flash part and it keeps on getting stuck on flashing recovry image do not touch phone and it just stays there... im not sure whats going on been tryin for a long time now...
View 7 Replies
I just tried to install frankenrom b5 through CWM. It said it loaded fine but I can't exit out of CWM. It kept going from back menu enabled to back menu disabled but the menu never came up. I do know that it is not visible unless I scroll down extra far but no matter what it will not show up. Any help?
View 1 Replies View RelatedI have a Droid Eris that I'm trying to flash from 1.5 to the latest rooted ROM 2.1. My first attempt, I copied PB00IMG.zip to the SD card, disconnected the phone, and flashed the firmware while disconnected from the PC. I think that prevented me from gaining root access, because I cannot remount the system directory using the adb commands (gives me access denied). I'm trying now to flash the ROM while still having the phone connected to the PC, but I'm not having much luck, as I am still being denied access.
PB00IMG.zip worked WONDERFULLY on my phone.
I had an issue flashing the newest version of the leedroid ROM. To start my phone was running stock un-rooted Android 2.1. This is what I've done
1) Rooted the device using the Unrevoked method. Everything with this went fine. I get the Superuser app and I can get the '#' prompt at a terminal.
2) Then I partitioned my SD card using Rom Manager in preparation for A2SD+
3) Then I booted into clockwork mod recovery and wiped data/factory reset, wiped cache, and wiped dalvik cache
4) Then I tried to flash the leedroid rom from zip on the sd card
After reboot my phone appears to be stuck on the HTC screen and will not move forward. But if I take out the battery I can boot back into recovery mode. So it appears my phone is not broken, but it clearly isn't working. I've tried flashing a number of different ROMs but get the same result each time.
I am trying to flash a custom ROM to my HTC Desire HD.
First I managed to unlock the bootloader using the Easy Ace Root Tool and installed ClockworkMod.
Then I tried flashing a Jelly Beans mod (JellyTime 4.2 R11) and it got stuck at the HTC logo screen. I tried wiping / formatting via ClockworkMod but with no success.
Afterwards I used a second phone to put the Download Android Revolution HD 7.3 ROM on the SD card and flash it. This one went fine through the installation wizard but when I was back to ClockworkMod recovery mode I got: "Can't open /cache/recovery/log" "Can't open /cache/recovery/last_log". Then I selected reboot and it was hanging on the HTC logo again... I was waiting for a minute before I took the battery out... After this I tried "format /cache" from the CWM but didn't work either.
Then I tried using a RUU utility in fastbood mode to flash an official HTC ROM:
RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.6 0.29_26.14.04.28_M_release_225512_signed.
It reached a particular point saying that the update failed.
I thought I cannot install the official ROM because I have unlocked the bootloader, so I locked it again using the htc fastboot utility. This didn't work either and the RUU failed again.
Here is what the bootloader currently shows:
***** RELOCKED *****
ACE PVT SHIP S-ON RL
HBOOT-2.00.0029
MICROP-0438
RADIO-26.14.04.28_M
eMMC-boot
Dec 22 2011, 14:28:19
I have just a couple of shots before this turns into a beautiful piece of aluminium brick.
I upgraded my Galaxy SII to official android 4.0.3 through Kies one month ago. Unfortunately, it often hang and finally cannot boot up again after my yesterday hard reboot. It stuck in the opening white logo "Samsung Galaxy SII".
So I used "download mode" and followed all the steps, including killing Kies, etc. to flash a new 4.0.3 through Odin. Everything seems working fine before I clicked "Start", e.g. yellow "ID:COM". Only boxes of "Auto Reboot" and "F. Reset Time" were ticked.
However, the installation process got stuck for over 5 hours now as follows:-
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..[code]....
What should I do next?? It seems not appropriate to reboot my device at this moment, but seems no other choice......
I rooted my phone using erisuser1's rooting for dummies method - this went off without a hitch, I followed the instructions to the T. I put several custom ROMs on my SD card (using the USB, and properly ejecting the phone as a drive) including KaosFroyo v37 and v38, CELBFroyo 3.6, PlainJaneT2_V2, and Vanilla_Tazz_19.I tried flashing each of them (following the wipe of the system info and the Dalvik cache) and all but the PlainJane got stuck in bootloops that lasted a long time. I waited anywhere from 15 minutes to a few hours, and none of the others ever loaded up. I'm fine using the PlainJane and happy to have the other features of root but am wondering if there's any advice or suggestions as to why none of the other ROMs worked for me?
View 24 Replies View RelatedMy phone was rooted with the 2.2 firmware everything was working fine and yesterday by itself the phone shut off when i tried to boot it, stays in the samsung galaxy boot screen. I tried going into download by holding vol+home+power but it says POWER RESET or UNKNOWN UPLOAD MODE. The phone is able to connect with my pc I tried flashing 2.2 Froyo with odin3 but its stuck at File analysis. Is there any way to fix this? I cant return the phone I bought it unlocked off ebay.
View 8 Replies View RelatedI was flashing back to stock rom and I followed deaths steps for it, and for about the past hour or so its been stuck, once like every 20 minutes the screen will flash and go back to android. Did I brick it or what?
View 12 Replies View Relatedi recently flashed custom roms in my arc s and returned to stock because of the features, when i installed ics 4.0.4 the battery meter is stuck in 100% and the mobile would switch of all of a sudden saying battery is emply i tried deleting battery stats, formatted everything except sd card still no use it is still stuck.. i flashed gingerbread and the battery meter worked fine i was showing the correct percentage, once after i flashed gingerbread charged the battery to 60% and flashed gingerbread it was showing the right percentage... i know the sensor is fine coz its working in gb.. i tried battery calibration and different battery status apps all show 100%. ics once the batterys drained it doesnt charge properly..
View 5 Replies View RelatedFor the past 2 hours I have been searching this site and reading about Rooting and Flashing new ROM's etc. and I'm still having trouble. I downloaded Cyanogen 6.0.0 and when the phone re booted it got stuck at the Cyanogen boot animation screen, and when I pulled the Battery and rebooted in to recovery I was able to restore everything and now the phone works again.
So first off, how long should it take after downloading a new ROM to boot back up with the new ROM installed? And how can I save the ROM in to the SD card? And when I go to DL Cyanogen it asks which home application I should use and gives me ADWlauncher and Launcher 2 as options.
I've been trying to load amonRA's recovery for my nexus one. I've managed to unlock the bootloader, and gain SU permissions. But for the life of me,I cant seem to flash the new recovery image. I've used better terminal, and it says that theres no flash image found. But I have Put it on SD Card. I've copied the text correctly and I cant get it to flash. I've also tried to downgrade the radio to get better reception, and its saying that the update isn't signed. Is there something still locked up?
View 6 Replies View RelatedI have a rooted 2.1 eris and adb is all set up. I get all the way down to the commands and the last one:
adb shell flash_image recovery /sdcard/recovery.img
says file not found. What am I doing wrong
I was wondering what kind of results people are really seeing doing this/how to do this.
View 23 Replies View RelatedSo I have looked around xda etc. Cant find a simple answer (hoping there is). So long story I am on a rooted Evo. I was trying to flash cm6 via rom manager. I kept getting error 7's. So I found the PC36IMG.zip followed the directions. I am now in bootloader. Tried (many times) to run nandroid. But it gives me the error while flashing boot image for all 3 backups.
View 11 Replies View RelatedI just rolled back using simple root, and before I started flashing custom roms I wanted to flash Amon RA's recovery-RA-evo-v1.8.0.img. I've tried flashing through terminal emulator, and that didn't work. I also tried flashing through adb. I have confirmed that I have root, but it's telling me that there is no image found. Does anyone have any suggestions? Thanks in advance.
View 2 Replies View RelatedI'm trying to flash the newest Amon ra image and I'm not getting very far. For one thing I keep getting 'error device not found.'
View 2 Replies View RelatedInstalled Flash Rec after trying to root my hero (following the guide stickied to the top of this forum) and its not giving me the button/menu item to flash it. My options are to Download Recovery Image (Grayed out) or Restore Backup Image which once clicked gives information 'Backup Complete'. How do I proceed?
View 3 Replies View RelatedI have already rooted my hero but I did not flash a recovery image or perform a nandroid back up mostly because I could not find clear instructions on how to do so, which caused me to have to completely wipe my phone and start over after I deleted some programs that caused my loop over and over. I know the commands I need to run in adb to flash the recovery image but I do not know where to download the recovery image or where I need to store it I also can't find anything on nandroid back could somone please explain these in detail with the steps I need to take so I don't need to start from square one again.
View 1 Replies View RelatedI'm trying to root my EVO, it's never been rooted before, but I'm stuck at the screen that says "Pushing recovery image." and it's been about 6 minutes now. During the rooting process, I wasn't allowed to install the HBoot drivers on my computer (I'm running windows 7, 32 bit) but I figured that maybe they were already installed on my computer because I have the android SDK installed..
View 5 Replies View RelatedI have a Pandigital Star Media Tablet and I am stuck on the boot image and it will not do anything else except boot into stock recovery and turn off. I am able to provide anything you need to possably fix this.
Heres a list of root programs installed:
-z4root
-Superuser
-Titainium Backup Pro
- LCD Density Changer
- Root toolbox
Heres the backups I have:
-Titainium full backup
-Pandigital Backup data
-ADW launcher settings and homescreens backup.
I was running the JI6 2.2 with cognition beta5.5 and was attempting to update however I needed to swap kernels since the current kernel didn't verify signatures. I was using vmware on a mac and i started it but then continued to use the mac side however the computer disconnected the phone from the windows side and now it is stuck showing an image of a phone next to a computer with a triangle with a ! in it between the two. Pressing all hardware buttons does nothing but black the screen and go back to the same screen. I've taken out the battery, sim, unplugged the cord, everything. Can't get back into download mode to redo the kernal swap. It's definitely connected to a valid, and working, usb port and i am now on windows itself instead of vmware. What do I do?
View 4 Replies View RelatedFlashing HTC Droid Incredible to Cricket...?
Has anyone flashed HTC Droid Incredible yet...?
I had a rooted Incredible using this method before however I had a problem with the on screen keyboard so I got a replacement. The replacement just came yesterday. Now I am rooting the replacement and the Unrevoked 3 program gets stuck at "Waiting for root... (Safe to restart if this doesn't work)"
I have the HBOOT drivers installed and my phone comes up in device manager as "Android Composite ADB Interface"
Did they apply a new update to the phone that prevents rooting? If so how long before I can get around it?
Loving the Jager 1.1 ROM. Just wondering if it is ok to due the OTA that keeps popping up? It is the 3.6 MB update that I believe dropped a while ago. I have just kept pressing install later. Any one know if it is ok to do this OTA update?
View 5 Replies View RelatedI have root access, have clockwork mod. i did a nandroid backup as well. now what is the next step? i downloaded rom manager and titanium backup(paid version) i thought i read somewhere about someone sayin that titanium has to be on the SD card or something for backing up the apps maybe same thing with rom manager? a little confused at this point im just a little bit lost here when it comes to flashing roms. i think i wanna flash capt jagers 1.6 rom but im not sure what else i have to do.
View 1 Replies View RelatedI've done everything without any major screw ups yet and wanted to try a custom ROM. Was just curious how to get my contacts back after doing that. Does the Titanium restore them or what?
View 7 Replies View RelatedWill flashing a new rom remove bloatware?
View 3 Replies View RelatedSo I downloaded two different ROMs from incredible stuff. You know you want it. And I try to install them with Rom Manager by going to Install ROM form SD Card, selecting the zip. I downloaded, and then checking backup and wipe, but when my phone boots back up, nothing has changed. What is it that I'm doing wrong? I eventually rerooted and that solved my problems. I still have no idea what was wrong.
View 9 Replies View RelatedI want to flash a ROM for the first time but had a couple quick questions. After it is done will my contacts come back? What should I do before I flash a ROM? I already backed up my current rom (sense ui) with the ROM manager app. I have already backed up all my apps as well with titanium backup. I am good to go at this point? I want to try to MiUi rom that just came out.
View 8 Replies View Related