I'm trying to root my EVO, it's never been rooted before, but I'm stuck at the screen that says "Pushing recovery image." and it's been about 6 minutes now. During the rooting process, I wasn't allowed to install the HBoot drivers on my computer (I'm running windows 7, 32 bit) but I figured that maybe they were already installed on my computer because I have the android SDK installed..
View 5 Replies
I flashed the custom recovery image instead of the temp way. Does anyone know how to get the orginal one back on it. Im taking it back dont want verizon pulling some stunt on me
View 6 Replies View RelatedMy rooted Evo keeps hanging up after I try to reboot into recovery. When I rooted my Evo I had used a bat file from my desktop to get into recovery after original root. My question is will I have to run this file again from my desktop with my Evo connected to get into recovery mode again to flash fresh Rom. Will there be any issues with running this recovery file again. Or Am I missing a step to get into recovery. Power off hold volume down while power on volume scroll down to recovery press power button.
View 1 Replies View RelatedI recently flashed a new custom rom everything worked fine until i added a new framework-res system app. I got stuck in cwm recovery and whenever i try to reboot my phone it comes back into the same recovery.
I can get into download mode though. I use cwm 5.0.2.8
Flashed a Fresh ROM, did a wipe cache and dalvik before flashing but now I'm stuck in the white htc evo 4g screen. Tried to reflash didn't work. I've pulled out the battery and powered on while holding volume down. This is what the screen reads:
SUPERSONIC EVT2-3 SHIP S-OFF
HBOOT-0.97.0000
MICROP-041f
TOUCH PANEL-ATMEL224_16ab
RADIO-2.15.00.09.01
Aug 19, 2010
I can boot into ClockworkMod Recovery v2.5.0.1 but my backup and nandroid files can't be located. Sometimes I get the Android with the exclamation point, sometimes not. PCIMG36.zip image can't be found either. I think my phone is screwed! I've searched through the forums and googled and tried out a many things but to no avail. Also, does doing all this through a Mac make a difference?
so im on my second eris root. all is well thus far, accept now i am trying to boot from recovery to put vanilladroid on it, and i cant get into recovery mode. i didnt have this problem with the last phone i did this to, and i dont know what im doing wrong at this point. i have reloaded amon's recovery image, and done all of that process over again. nothing works, when i boot power/volume up, all i get is the skateboard guys, then the exclamation point inside a triangle, with a phone laying down. "button mashing" on the end and send buttons then leads the phone to reboot back to normal mode. i even tried to reboot recovery from adb, and still got this end result. i am out of ideas (as im no programmer...)also, i have tried to get on irc, but keep getting booted, even when switching sn's.so ive given up on that as well
View 5 Replies View RelatedI have a rooted incredible with the hydra kernel. i had the 1.13 and went to the 1.15 over clock kernel and my pone went into a reboot cycle and wouldnt start up. i was told to go to the format boot in the clockwork recovery so i did. now the phone will only start up in the bootloader screen it does the sd card check. any ideas? they are sending me a new phone but i really dont want to re set up the phone.
View 17 Replies View RelatedI was running aloysius v12, tried flashing purehero 2.1, and got stuck on the white skateboarder boot screen. Pulled battery, tried recovering my nandroid backups, (use clockwork mod), and whenever I try recovering my backups, i get a "Error while flashing boot image!" message, and it stops.
I've tried flashing just the regular Aloysius2.0v12 file, not a backup, and i get:
Copying files...
E:Can't symlink /system/xbin/[
E:Failure at line 10:
symlink busybox SYSTEM:xbin/[
Installation aborted.
The only thing I can do from here is try to flash something else, or reboot. I can't get past the recovery screen.
I'm not sure where to go from here. Someone told me to install amon ra instead of clockwork, and to flash a new rom from there, but I don't know if that'll be the right way to go about it or even how to do that. Sorry for being such a noob, and i'm sure this problem is in a thread somewhere else but i looked all over and couldn't find it.
I have a Mytouch 3g with 3.5mm that will not boot past the "HTC magic" screen. I know the first boot after flashing a new rom is supposed to take a while because I've done it before successfully, but this time I've left it for hours and when I come back the phone is dead, so I fully charge the battery and try again, same thing.
I can still get to Hboot (maybe there's hope?) and this is what I see:
SAPPHIRE UNKNOWN 32A ENG S-OFF H
HBOOT-1.33.2010 (SAPP31000)
CPLD-13
RADIO-3.22.20.17
i have Samsung Galaxy Young S6310 rooted with CWM and orig kernel. Today i entered in recovery mode with Quick Boot app show some CWM recovery features to my friend and when i select ''reboot system now'' it show Samsung logo and CWM was back. Every time. Simple i cant start my phone. I can only enter to Recovery and Download mode. I search some posts, where peoples have same problem. Somebody said that I need to flash original recovery, i have it, but my USB debugging is off and Odin have trouble find my device. I have installed drivers on pc. Last thing - i havent got backup, so i am here.
View 3 Replies View Relatedi have a HTC Desire 601 with Virgin Mobile (in canada) and i tried to flash a custom rom, and it didnt work, i got an error 7, i tried several rom and all i got is a error 7.now i want to go back to a stock rom , but every time i think i have a good stock rom, i get an error 7.
this is what appears in the bootloader
***TAMPERED***
***UNLOCKED***
ZARA_UL PVT SHIP S-ON RL
HBOOT-2.22.0000
RADIO-1.26.40e.00.14
OPENDSP-v.18.2.0268.0925
OS-2.14.666.3
EMMC-BOOT 1024MB
i flashed PhilZ Recovery (philz_touch_6.19.3-zara.zip is the exact filename), but i think i've done something wrong because everytime i try to flash anything, i get an error 7, even doing a nandroid backup gave me an error..
so, what should i do to get the phone to a working state?
i have a motorolla droid 3. xt862. I am running cyanogen mod 7 and it is rooted. i flashed the Blur_Version.5.6.890.XT862.Verizon.en.US file using stock recovery and now the droid 3 bootstrap is gone and wifi wont work. im stuck with cm7 which doesnt work. I would just like to go back to the way it was when i got it stock rom and everything. I have no interest in custom roms because absolutely nothing works and it is all very buggy.
View 1 Replies View RelatedI successfully rooted yesterday. Installed wireless tether and was going to uninstall some bloatware. When I get to the ClockworkMod Recovery screen, it won't select anything. I can move up and down but when I select it with the power button, it just goes to a blank screen....like your locking the screen. When you hit the power button again, the menu comes back.
View 8 Replies View RelatedI was messing around with clockwordmod recovery and did something I shouldn't have. I am not deodexed, but I heard that you could apply some of the rom modifications without any problems. So I did one, and it was ok. I decided to try a different one and thats when I ran into a problem. My phone is stuck at the M logo now and I am not sure how to fix it. I could have sworn that i made a recovery before I installed the .zip but when i went in to try to recover it said there was nothing there. My one savior is that I have the SBF file I need, but I am on a mac so I can not use at the moment and would like to avoid this at all costs. Does anyone have any suggestions for me or will I need to SBF? Also, i have not let it sit at the M logo for an extremely long period of time, is it possible that it will pull around and start to load properly or is there definitely a problem?
View 3 Replies View RelatedTried updating to 2.2..... now stuck in recovery mode. There is no way to select any options because i do not have an OK KEY...
View 4 Replies View RelatedMy phone is stuck at clockworkmod recovery 3.2.0.1, and it wont even load up to the stock screen of android, I've tried zefie's technique of putting the phone into emergency mode, but it still didn't work.
View 7 Replies View Related caused & am now stuck in a recovery boot loop.
- bought a Thomson QM734-8G tablet (Allwinner A13b clone), running Jellybean 4.2.2;
- PC interface worked fine in MTP and large storage modes;
- setup Android SDK & Java JDK on PC and communicate with tablet via ADB;
All OK so far..After a couple of days, I decided to replace stock recovery with ClockworkMod Recovery, so I could start messing about with the tablet.
I found the CWM 6.0.2.8 mod supposed to work with these tablets and, following instructions, determined it was indeed running on sun5i hardware and had 10 partitions (nandj) and downloaded the appropriate version.
I used ADB sideload to install CWM and everything appeared to work OK ... until I rebooted and found myself stuck in a never-ending cycle of CWM-based recovery bootloop.All I get is the CWM recovery console, with a few lines of error & the tablet will go no further.
E:can't mount /cache/recovery/command
E:cant mount /cache/recovery/log
E:cant open /cache/recovery/log
E:cant mount /cache/recovery/last_log
E:cant open /cache/recovery/last_log
CWM functions work properly and nothing will mount through the 'Mounts and Storage' section, although sideload mode still seems to work.Attempts to use ADB sideload to install a different CWM or other recovery image have all failed, and LiveSuit and PhoenixSuit both have issues detecting the tablet (despite trying various versions of each & following instructions precisely), so I can't flash a replacement ROM to fix things.
At the moment, I just want to rip CWM out and go back to factory recovery mode and have a working tablet again! I think the Bootloader is locked and the tablet is unrooted. Superuser or SuperSU don't want to install properly. However, using ADB, it looks like I can get root access in shell (#).
Recently I have tried to root my Samsung Galaxy 3 7.0 (SM-T210R) WiFi edition. After unsuccessfully attempting to install a custom rom, I believe I have accidentally deleted the stock rom for the device..So now, whenever I turn the device on, it automatically brings me to CWM recovery. I have tried to install a different rom onto the device unsucessfully, giving me an error saying "format() expects 5 args, got 4" It also says (Status 7). I have also tried to connect my device to my computer and hook it up to Odin, but Odin does not recognize the device.
View 3 Replies View RelatedProTab 25XXL tablet
after too many pattern attempts I need factory reset (disabled usb tethering setting and wifi off). When I get to android system recovery I can't do anything. I'm trying volume up/down buttons but I'm still on "reboot system now"
When I push volume down button, nothing happens:
dsc_1117.jpg
and when I push volume up button, just this screen:
dsc_1118.jpg
I am trying flash the latest recovery mod but it's stuck on 100% don't know what to do
View 6 Replies View RelatedI tried to backup with a CWM-based Recovery, it gets stuck at Backing up boot image . . .
Backing up recovery.image . . .
Backing up system . . .
5a5372fc.0
And I wait for a long time (About an hour ) it just doesnt move, Is something wrong?
Last nigt i rebooted my phone to recovery to reflash ROM,did it and now it only boots in recovery even if im not pressing menu key...I could boot to download but without pressing menu key so i flashed stock firmware but still it only boots in recovery.When im in recovery i can move UP,DOWN using volume keys but menu key does not work,when i press it nothing happens...i think that that menu key is somehow stuck but it works normally when i press it i can hear "click" that makes but does nothing.
Got CWM 5.0.2.8 and run key test all keys work(volume up,down,menu key,back key) except main menu key got nothing on output when pressed main menu key
I've been running Kangerade since shortly after it came out... And loving it.. Yet today I saw my phone was rebooting - and waited (figured it over heated or some such..) and waited... And waited... That android boot image does stop being cute after a while... Crap.. Just cycling... Go into recovery... Umm.. No seriously.. Go into recovery.... Go on.... Nope. (apparently latest ROM MAnager screwed up CWmod..) So... Can't load my phone... Can't restore backup..
View 19 Replies View RelatedMy Problem: Was using the HTC Desire bought in India. I rooted with Unrevoked 3.21, S-OFF with Alpharev.
I was thinking of taking my phone to HTC to show an LED burnin problem, and tried to unroot by flashing the RUU for Asia_India: RUU_Bravo_hTC_Asia_India_1.21.720.4_Radio_32.36.00 .28U_4.06.00.02_2_release_127705_signed. I thought that was the correct RUU.
I booted my phone in Fastboot, applied the RUU, and it rebooted my phone into RUU. Then it flashed an error message saying the RUU version was incorrect. Being the idiot that I am, I rebooted the phone..And got stuck!
The phone does not boot. On pressing Vol- and Power button, it vibrates, and then nothing. Screen is blank. It wont boot into Fastboot, Recovery or the ROM. If I connect it to USB and do the Vol- and Poweron, it detects my device as an Android 1.0 device.
I have tried the following:
1. Went to Android SDK, tried flashing Clockworkmod recovery image with the command:
Code:........
I try to get into recovery mode and it just locks on the HTC logo. I try and do a hard reset and it again locks on the HTC logo.
View 1 Replies View RelatedSo I followed the droid-life.com method to get SPRecovery on my stock 2.1 droid.
Everything went fine, I had SPRecovery and I was going to try to get root access using this ESE81update.zip created by pete and following this method...
YouTube - Installing a Custom ROM in SPRecovery with No Root
I rooted my phone a couple weeks back. I backed up my apps with titanium pro and downloaded ROM manager. I clicked "reboot into recovery mode" from ROM manager and the phone went into recovery.
I am now stuck. I have four options:
1. reboot system now
2. apply update from SD card
3. wipe data/factory reset
4. wipe cache partition
I tried option one and clicked the button on the right side of the phone (the "enter" button), but nothing happens. In fact, none of the options do anything. seems like the phone isn't recognizing the enter button.
I have not flashed clockwork mod recovery. I think it probably requires some type of reboot but i don't know the steps.
I have a Samsung Galaxy Nexus 4G on Verizon, and I just unlocked the bootloader, then I tried to gain root access through this guide, started at the "ClockworkMod Method": [HOW TO] Root the GSM/HSPA+ Samsung Galaxy Nexus - Android Forums now when I flash the su.zip and try to reboot, the phone is stuck in the Google reboot screen.
View 3 Replies View RelatedI got stucked on the CWM-based Recovery v5.5.0.4 for SmartPad 907c
and it looks like this:
CWM-based Recovery v5.5.0.4 for SmartPad 907c
E:Can't mount /cache/recovery/command
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
I have an android tablet which is the so called "Q88" allwinner a13 running on a 4.0.4 ICS, and I was trying to put a CWM on it and it did but it got stucked on the CWM, I used a sausage script for it (its the december 2012 file). can I unbricked my tablet? If yes how?
I just install the clockwork recovery and it's stuck on there I tried restoring default turning it off and on it will stay on there I think it's bricked and I don't have any backups what's do I do
View 9 Replies View Related