I know ADB was working before I updated to 2.1 root. Looking at the USB devices the current driver isn't compatible with the phone now. Is there a change I need to make to get the USB driver to work? Yes I have USB debugging on.
View 4 Replies
Used Toast root this morning successfully and without problem. Trying to use evo-recovery and every time I try to do anything I get the error, "error: device not found." Any ideas how to fix it?
View 5 Replies View RelatedI've already installed the drivers and my phone is recognized in the device manager. I already set my phone to usb debugging. I opened the command prompt in windows 7, then i followed the instructions, then i typed "adb devices" and it flashed "List of devices attached" only. when i typed "adb shell", it says "error: device not found".
How can I root my phone successfully?
My current software version is "V08b" and i'm sick of it because its full of bugs.
I tried to update my software using LGMobile Support Tool..it dectects my phone as LGP690 but it says that i have the latest version. But when i clicked "supporting models", it says that p690 is updateable to V10b..
K my frustration level is definitely climbing.I've checked and don't see anything related to this specific issue.I'm following the step by step instructions on RootYourDroid. Have tried both the custom recovery image (adb shell is what's getting me that message) and the busybox instructions. Each time, in the adb window when I try either option I get an "error: device not found" After doing some research, I found info saying it likely had something to do with the debugging drivers. So I uninstalled them, reinstalled them and went through that whole process again. Tried both the busybox and custom recovery image steps. Still getting the error message.
Anyone have any experience with this issue that might be willing to sling some help my way?
I've seen different posts about this, but none for the captivate, and none in the past month, so.Last night I rooted my captivate using the stickied thread in this forum. Worked great! Simple, and not much to it. I have the Superuser Permissions app in my app list.This morning I installed the android sdk and the drivers from the samsung website, enabled usb debugging on my phone, connected the phone, and did the following in my cmd prompt:.C:android-sdk-windows yes, that is the correct location of the android sdk folder) but all i'm getting is 'error: device not found'. I tried uninstalling my drivers and doing it again, this time connected to a different USB port, and still the same thing. Anyone have any insights? I'm able to successfully connect my phone to my machine and view it like a storage device (drag folders around, etc)
View 11 Replies View Relatedproblem: adb shell error: device not found winXP cannot dedect adb interface on device manager so i cannot use adb shell. i tried 2 pc
system properties:
winXP 32 bit sp3 home
i7500 I7500XXII5 gaosp-2-10-21-2010-nightly
device manager dedect adb interface when @fastboot for 15 seconds. and i installed current drivers. after 15 seconds phone reboot normally. and device manager cannot dedect adb interface. and adb shell failed... device not found...
I've installed AndroidSDK and have the drives download but every time I point Windows to the folder it says no drivers were found for my device. I'm trying to do this with the phone being recognized as an ADB device.
I got the PC to recognize my phone by installing HTC Sync but in the Device Manager it still shows a yellow exclamation point.
When I troubleshoot it, it says Windows can not launch driver "Error 37". Anyone know what's wrong? I have my phone rooted using the PB00IMG.zip file but can not complete the recovery partition due to the Windows not being able to communicate with my Eris.
Until now, have been using Android SDKs Emulator with the Eclipse plug-in, but recently replaced my non-Android phone to T-Mobile's MyTouch 3G Slide. Today, tried to install the Windows Android USB Driver for the phone. Followed instructions in http://d.android.com/sdk/win-usb.html (USB Driver for Windows Android Developers).
When looking for the driver, Windows gave me a "Could Not Find Driver Software" message. When telling Windows where to search, I pointed it to the SDK directory where the driver resides (¦Android-SDK-windows/ usb_driver). Also tried ¦Android-SDK-windows. Specified use sub- folders" in both tries. I am using Vista 64 bit, and suspect that may be the cause.
The "could not find.." message box from Windows has this information under Details:
Problem Event Name: PnPDriverNotFound Architecture: x64 Hardware Id: USBVID_0BB4&PID_0E03&REV_0100&MI_01 OS Version: 6.0.6002.2.2.0.256.1 Locale ID: 1033
In Windows Device Manager, "Other Devices ==>ADB==> Properties" shows Device type: Other Devices Manufacturer: Unknown Location: 0000.001d.0007.002.000.000.000.000.000 Device Status: This device is not configured correctly. (Code 1). There is no driver selected for the device information set or element
In the sdk's "usb_driver" directory, the "android_winusb.inf" file has several VID's beginning with 0BB..., but does not have one for the one listed above. Nor is there a [ ... ]header entry for the MyTouch 3G Slide (Expresso?)
I suspect this is the reason for the "Driver not found"
Am using the 32 bit version of "Eclipse IDE for Java Developers" downloaded last April. (At that time there were a lot of forum warnings about not using the 64 bit version.)
Today, before trying to install the driver, I uninstalled the Android plug-in from Eclipse and then uninstalled the Android SDK I had installed in April which was at the 2.1 level. I reinstalled the SDK at the 2.2 level taking "all items". Then reinstalled the Eclipse plug- in.
In the "Android SDK and AVD Manager" checked for any updates. There were none (I'd just re-installed, so that makes sense)
Information in this thread looked like a solution:
[url]
When I tried that, got the same message box.
These two threads from 2009 have entries that say the 64 bit driver is in the SDK I cant find it. Could be looking the wrong place though.
[url]
[url]
The android_winusb.inf has these two .CAT entries in it CatalogFile.NTx86 = androidwinusb86.cat CatalogFile.NTamd64 = androidwinusba64.cat
Using the information from the above ¦5512 thread, I added these lines to the [Google.NTx86] group immediately following the ";Google NexusOne" information and before the [Google.NTamd64] entry
CODE:.................................
When that did not make any difference, added: %SingleBootLoaderInterface% = USB_Install, USBVID_0BB4&PID_0FFF which was also part of a post. Made no difference
The .INF has a [ClassInstall32], entry, but there is no [ClassInstall64] entry. I do not know enough about INFs to know if that is needed or not.
Eclipse is showing an error (little red "x" next to my project name), but there is no error shown in any files meaning there is no corresponding "x" next to any file...nothing. When I try to run it, it says, "Your project contains error(s), please fix them before running your application."You received this message because you are subscribed to the Google Groups "Android Developers" group.
View 11 Replies View RelatedWhen tryign to extract the hboot drivers from unrevoked, i get an error stating that an unexpected error is prventing me from copying the file. the files that wont copy are:
View 1 Replies View RelatedI've already installed the drivers and adb,but adb shell shows no device.The 2nd LG USB Modem installed as an Android Phone.I'm using winXP,SP2 PRO, these are my steps.enable USB Debugging mode,dial 3845....and enable root permission,restart my phone,connect my phone to PC,install the drivers.win+R TO open CMD window,cd to the sdk tools directory,adb shell,shows device not found in my device manager,there's an android phone class,under it is an android Adb.
View 4 Replies View RelatedEvery time without fail when I try to install the adb driver I get a fatal error message. I have USB debugging selected, tried to mount in flash mode, uninstalled and reinstalled and every time I get a fatal error. I would like to install custom apps but w/o the adb driver... no luck. Any solutions? I have scoured the net and have not found a applicable solution. Using XP 32 sp3 and if there is any other info needed about my g1 or op sys, just let me know.
View 2 Replies View RelatedIs there any sample code or documentation on writing a driver for a USB device connected to the phone? Any suggestions would be greatly appreciated. Regards Dave
View 2 Replies View RelatedDevice driver failed to install
View 10 Replies View RelatedWhere I can get the device driver for the Ampe A10 10.1" tablet.
Windows 7 x64 detects a device called "Android" when you connect the tablet and says no driver found.
The tablet does not appear on the device chooser in the eclipse development environment.
I am using htc hd2 and wana play shadowgun on it. I downloaded its non tegra version..The game launches fine but it crashes back to home screen after the intro..So i downloaded chainfire pro .. but when click on install driver . The msg appeared dat " need 1022987 more bytes"..But i had 190 free ram ... 45 mb free phone storage and 4gb free on sd card..
View 6 Replies View RelatedNo matter how many times I reinstall the device drivers, they all install correctly besides the Android ADB Device driver.
View 4 Replies View RelatedI ran into the first problem with my Droid- and I am sure it is not the Droid itself. I am running Vista32- I have Motorola Media Link installed. When I plug my Droid into the PC, I get a mass storage device that installs OK most of the time, and an "unknown device".. Even when I mount the SD from the phone, I still see no Drive in my computer The unknown device never installs. I have tried almost every suggestion i have seen.. reboot pc..reinstall MML, reboot phone.. no luck
View 6 Replies View RelatedDoes anyone know where I can get the bluetooth peripheral device driver for the X?
View 1 Replies View RelatedI'm following the directions found here to root my EVO, but whenever I try to install the HBOOT USB drivers, I get an error: "The system cannot find the file specified."
I'm running Windows 7 32 bit on an AMD processor.
I have now installed a generic HTC Desire Rom on my phone all good there.When i copy the rootupdate.zip and boot into recover mode and then run the recovery-windows.bat file , i get a Device Not Found message.I have USB debugging enabled and i also have the USB drivers installed from the SDK and the Sync software.Any ideas as to what i can try?
View 2 Replies View RelatedI'm trying to modify the Android device driver for calibre (an e-book management program) so that it identifies devices by only vendor id and product id, and excludes BCD.
The driver is a fairly simply python plugin, and is currently set up to use all three numbers, but apparently, when Android devices use custom Android builds (ie CyanogenMod for the Nexus One), it changes the BCD so calibre stops recognizing it.
The current code looks like this, with a simple list of vendor id's, that then have allowed product id's and BCD's with them:
CODE:..........
The line I'm specifically trying to change is:
CODE:............
Which is, the line for identifying a Nexus One. My N1, running CyanogenMod 5.0.5, has the BCD 0x226, and rather than just adding it to the list, I'd prefer to eliminate the BCD from the recognition process, so that any device with vendor id 0x18d1 and product id 0x4e11 or 0x4e12 would be recognized. The custom Android rom doesn't change enough for the specifics to matter.
The syntax seems to require the BCD in brackets.
How can I edit this so that it matches anything in that field?
I'm trying to install geo-fix in my galaxy (galaxo 1.6.3.1) so I reboot in recovery and start adb (windows 7 x64) but it always says device not found.I've have installed android SDK, unistalled also NPS, install and unistall drivers but it doesn't find my device.I've also read and tryed everthing that you say on your forum.
What can I do?
I'm following jonamerica's howto in removing bloatware, but when I get to "adb shell", I get "device not found". I've just mounted /system and am in ClockworkMod resovery, with USB connected (USB debug was enabled before I rebooted into recovery, do I need to enable USB debug while in recovery?).On my Windows XP device Manager shows Android Composite ADB Interface.When I type "adb shell", I get "error: device not found". adb devices lists nothing connected.I've searched this forum and googled a lot since bumping into this and haven't found a solution that works.
View 10 Replies View RelatedI have Alcatel OT-985, so I want flash&root, so I found this thread [URL] but I have errors in the first steps.
When I open adb shell I have this error: 'Device Not Found' error in Android. Drivers are installed, adb installed, everyting installed. Usb debuging checked. Windows 7 recognize device, but adb not.
I also have HTC Deire, and this phone working in adb, but Alcatel OT-985 - Device Not Found. Here is my screenshot.
Some texts say about to add manual device id and vendor number in adb_usb.ini
I tried that but cannot find this numbers...
I got "no resource found that matches the given name(at 'id' with value @id+/textview')" my main.xml file looks like this: <?xml version="1.0" encoding="utf-8"?> <TextView xmlns:android=" http://schemas.android.com /apk/res/android" android:id="@id+/textview" android:layout_width="fill_parent" android:layout_ height="fill_parent" android:text="@string/greetings"/> Any idea what I am missing? You received this message because you are subscribed to the Google Groups "Android Developers" group. To post to this group, send email to android-developers@googlegroups.com To unsubscribe from this group, send email to android-developers+ unsubscribe@googlegroups.com For more options, visit this group at http://groups.google.com /group/android-developers?hl=en
View 3 Replies View RelatedI am placing a code below, I have created a local Thread and getting Error at the last Closing Braces, Can anybody please sort it out for me.Thread dt = new Thread(this)
View 2 Replies View RelatedHave you ever picked up your wonderful device and heard it squeak? And even in normal handle I'm sure you've heard this happen. Well, if you look close enough it only happens on the right lower side when you press in.
On the left side there is a hinge that the cover connects into, while on the right side there is the microSD slot. This is where the plastic presses in as there is not a hinge keeping it tight.Fix ideas anyone? Any way to fill up the SD space?
I am having this error "device not found" when I try to push a file. It's not a driver problem, it's not a USB connection problem. ADB commands work until the point where I try to push the file. Then I see "device not found".
I might be doing something wrong, I'm pretty new at this stuff. Or it might be just that the root access to my device has problems.
Here's what I do:
Code:
c:adb>adb devices
List of devices attached
3556*********09 device
c:adb>adb shell
shell@android:/ $ su
su
[Code] .....
I've also tried to push "build.prop" directly from my computer but get the same error.
I must mention that - strangely (to me at least) - after mounting /system as RW, I check the permissions using ES File Explorer's Root Explorer, they are shown as RW, I try to edit "build.prop" directly and I still get "cannot save file".
When I try to change permissions of the file using Total Commander -- to -rw-rw-rw -- I manage to do this ("Operation successful") but I am still unable to edit the file or overwrite it.
I am new to android, I try to create layout so that I have background image, and have a ImageView with animation start from bottom right of screen and along with a TextView stay on top of this ImageView. (Hope my describe make sense).
My problem is when I try use "android:layout_above="@id/flyobject"", the eclipse alway say: error: Error: No resource found that matches the given name (at 'layout_above' with value '@id/flyobject'). But as for sure I have defined flyobject, and I can find it's in my R class.
Here is my XML file:
<RelativeLayout xmlns:android="http://schemas.android.com/apk/res/ android"android:layout_width="fill_parent" android:layout_height="fill_parent">
<ImageView android:id="@+id/background"android:src = "@drawable/background"android:layout_width="fill_parent"android:layout_height="fill_parent" android:scaleType="centerCrop"/>
<TextViewandroid:id="@+id/flytext"android:layout_width="wrap_content"android:layout_height="wrap_content"android:layout_above="@id/flyobject"/>
<ImageViewandroid:id="@+id/flyobject"android:src="@drawable/asteroid01"android:layout_width="wrap_content"android:layout_height="wrap_content"android:layout_alignParentRight="true"android:layout_alignParentBottom="true"/> </RelativeLayout>