Anyone else have problems with sensitivity after applying a screen protector?Which protector do you recommend?I was using some crap from TMobile for like $15. It streaks a ton, and seems to give me problems with sensitivity on the real screen.
View 4 Replies
HTC has fix in the works for EVO 4G screen sensitivity; separation problems are minor -- Engadget
Question is when are these new phones gonna come out and how hard is it gonna be to convince them to exchange it after 30 days. I might just return my phone at 30 days and get the new hardware when it's ready.
is there a way to reduce the sensitivity of the screen because when i type something i sometimes have my fingers hovering over the screen (NOT touching it) and it registers it as a key stroke! how can i reduce this sensitivity?
View 4 Replies View RelatedI was wondering if there is a way to turn down the sensitivity for landscape rotation. Sometimes when I just sit my phone down on my desk, even if I only turn it a little bit, it goes landscape. It's kind of annoying because then when I pick it up, I have to turn it landscape and back to portrait so the accelerometer picks up that I'm turning it. It seems too sensitive at times.
View 8 Replies View RelatedIs there a way to adjust the sensitivity for the Touch Screen on the new EVO. It works very well, almost too well, it is very sensitive.
View 3 Replies View Relatedhow to adjust screen sensitivity under Android, specifricaly Froyo on Nexus One?
I'm trying to research this topic but there seems to be very little information about this. I can't find any tool, script or custom rom that would allow screen sensitivity to be adjusted.
I found a thread talking about doing it for Liqid's touch using script but that's about it. I took a look on the script and I can't move forward with it as the path's script uses do not exists in my Nexus One. The goal is to make the screen more sensitive then it is as a default.
Thread reference above:
[URL]
Script:
#!/system/bin/sh
sensitivity=25
noise=25
echo "set sensitivity to $sensitivity"
echo $sensitivity > /sys/devices/platform/i2c-adapter/i2c-0/0-005c/sensitivity
echo "set noise to $noise"
echo $noise > /sys/devices/platform/i2c-adapter/i2c-0/0-005c/noise
echo "done"
I was thiking of buying either a screen protector from verizon or best buy. I was wondering which is the best to buy out of the two or if there is a better protector? Also what is the best case for the motorola droid? Lastly, when I make phone calls my screen goes black so it is hard for me to end calls. How can i fix this? I don't see any settings for this on the droid.
View 11 Replies View RelatedWell having just got a X10. It has a pre-installed screen protector. Somehow I managed to scratch the screen protector and now I want to remove it however I'm having much difficulty removing it. Now I'm thinking if I should get a replacement screen protector as the Rogers version doesn't come with a spare one or just go without it. Anyone without the screen protector wanna add input about the durability of the mineral glass screen? I know that the screen on the iPod Touch 2G is very durable since I own one without having a protector on but I want to know if the X10s screen is just as durable.
View 17 Replies View RelatedSo I recently got a set of screen protectors and put one on.All was well just noticed a few bubbles and so I tried to work them out.They weren't going away, so I figured I would try again so I removed it and to my astonishment the bubbles were still there. It's like they formed under the screen somehow when I put the protector on, they were absolutely not there before.There are 2 in the center of the screen and a few along the edges. At first I just thought it was a water spot but I cannot wipe them off.The ones on the edge of the screen I can"push out" to the edge to almost make them disappear.When you touch them with the pads of your fingers you can feel a slight "bump" in the screen (very minute but still there).They bubbles are easily visible when the screen is off and almost go away when the screen is on but you can still tell they are there.Is this a defect in the phone or did I cause this trying to install the protector? I didn't push down hard on the screen, just applied the protector and they appeared.
View 2 Replies View RelatedI am expecting my ordered screen protector to arrive shortly.
1. What is the best way of cleaning any marks off the screen before affixing the screen protector?
2. What is recommended method of fixing the protector?
3. Does the use of this affect the ease of using the touch screen?
I'm currently using the phantom skinz line and although I like the body protectors I think the screen protector has reduced some of the screen's clarity/sharpness. This wasn't an issue with the static protectors I got from verizon. The only reason I replaced the verizon ones is because they didn't cover the buttons along the bottom of the screen. Anyone find a static protector they like that covers the whole screen?
View 18 Replies View RelatedAnd the gold toggle thingy is USELESS when trying to click on an icon. Is there a way to lower the sensitivity of the screen or the toggle? In a. Normal 20 minute browsing session I have to hit back at LEAST 10 times due to ever so slightly mis-touches.
View 4 Replies View RelatedFirst off thanks for all the great info. I have been lurking for a while and couldn't have rooted without your guys After I rooted my Eris (Now running Non sensible 13.2 after trying tazz froyo and a few others) I now have problems with my touch screen, especially on the upper right side quadrant. Just curious if anyone has any solutions or has experienced the same type of problem.
View 4 Replies View RelatedIs there any way to turn up the sensitivity on the touch screen?It seems decent enough, but it is no where near as resposive as my old iPhone.Why? It just seems like I have to touch everything on the screen twice.
View 10 Replies View RelatedI'm just going crazy (wouldn't put it past myself) but it almost seems as if after I rooted my droid and starting using Pete's BB Roms (currently using 0.4) my touch sensitivity on the screen has decreased. I've been finding that I've had to tap more than once (sometimes repeatedly) on some functions to get a response that I previously had no trouble with.I've not tried any other ROMs and I haven't gone back to stock to test.I also am NOT using any type of screen protector.Has anyone else had similar issues?
View 9 Replies View RelatedI can't find anything on this function. I.E. For those with a heavier touch, unwanted applications are opened when scrolling or navigating around the screen. For example, my contact list.I'll be running down the list to let's say the " R's " and when I get near the person I want to contact and slide the list up or down to center their view, it seems like the slightest touch anywhere besides right on their name opens up the wrong one.
View 1 Replies View RelatedThe one I used in the Verizon store required a bit too much pressure.
View 7 Replies View RelatedI've had my hero for about 10 days now. So far I am loving it way more than my old winmo phone.That said, I find that the screen is just not nearly as touch sensitive as my ipod touch and im kind of disappointed. I have to press things sometimes 2 or 3 times to get it go. Especially in the corners
1. I did do the text alignment delay
2. I have a screen protector. Its a $20 Invisible Shield by ZAGG that is off the shelf. Could that be causing the slow and unresponsive screen? What do you guys use?
3. Does the hero really NEED a screen protector? I previously had an HTC touch DIAMOND and i didn't use a screen protector evre and it got scratched up to HELL. Just for reference, I used my ipod almost in the same way (in and out of jeans pocket, not with keys, etc) and it didn't scratch AT ALL.Any way to improve this would make me way less disappointed here.
Sometimes the touchscreen is just fine, but other times it falls in sensitivity.I find myself have to press down hard on the screen in order for it to recognize the touch.This has been the case both with or without a screen protector.Anyone else experience this? Can this be improved in any way by the future 2.1 update?
View 14 Replies View RelatedBut sometimes other small parts/and or button commands lock-up. For example; since I am new to Swype, I decided to take the tutorial and each time I would click (or even tried to slide) the next button, it wouldn't respond took about 5-7 tries.While on the phone with tech/and CS yesterday (for whole diff issue), I asked about the Capacitive Button Sensitivity - as mine wasn't working that well either (as others have mentioned). Tech had me remove the battery for 2 full minutes, and put back in - and now the Capacitive Buttons works perfectly.Anyone else having partial screen/certain buttons not responding to commands? I guess I could try removing the battery again, but I am not sure that will fix it.
View 4 Replies View RelatedYesterday when I was going to sleep, I had my phone plugged in when I received a text. I attempted to unlock the phone, and it wouldn't! I started freaking out a bit, finally was able to unlock it, but had a tough time replying using the keyboard. It seemed the screen was spazzing out. When I unplugged the phone, everything was fine. I installed the free Paint application and ran some tests. As can be seen, using a charger that outputs > 850mA (the stock charger's value) is no good for touch sensitivity. If anyone can chime in with other concerns, that would be very helpful. I find that the 1000mA charger definitely charges the phone faster; does anyone think that this is bad for the phone (aside from the screen issue)?
I misread the stock charger's amperage initially; I thought it was 250mA, which is why I'm using the 1000mA. I think for now I'll switch to the stock charger. I would like to use the 1000mA if any other users think that would be fine. I don't have a problem unplugging it to use it.
hey guys! I'm a pre owner soon to be EVO owner! I don't think I will be getting a case in the beginning as I want all of it's sexiness to be seen by the world. So I wanna get a really good screen protector. Reading the accessories must have thread people named many different ones like ghost armor and other name brands I can't think off the top of my head. Which would you prefer or not recommend?
View 40 Replies View RelatedDoes it look good?
Here is the links to the bigger versions
http://farm5.static.flickr.com/4138/4793083201_4090c0f3e5_b.jpg
[url]
[url]
[url]
[url]
[url]
Purchased phone a while back.I assumed a screen protector would already be on the screen but upon close inspection, i cant tell whether there is a protector on the screen or not.
View 2 Replies View RelatedI have had a screen protector on my Evo since I got it from Sprint on June 5th. It is a Sprint brand and is the anti glare type. It still looks good...no scratches, not falling apart etc. But I was wondering if it will damage the screen from being on so long and should I replace it with a new one. I never had occasion to use a protector before so forgive me if the question sounds like a stupid one.
View 4 Replies View RelatedI recently bought the official screen protectors and after my second attempt i managed to get one on..only thing is theres a little what looks like a spec of dirt on the top right of the screen.. should i leave it there or should i buy some more screen protectors and try replying again? Also could someone recommend me a good app that allows me to transfer my contacts, apps to my new 16GB microSDHC card.. I tried the one listed here but all i get is no app found..cheers
View 2 Replies View RelatedI know this has probably been answered a bunch of times. What is the best screen protector to buy? I've heard good things about Ghost Armor and Steinheil protectors. Out of those two, which is the better screen protector?
View 10 Replies View RelatedI don't know if this is a repost but i got dust under my SGP screen protector and it was really bugging me. I used blue painter's tape and it worked perfectly.
View 2 Replies View RelatedWhat brand of screen protectors do you all like? I've heard people talking about Zagg, Wrapsol, and Phanton Skinz, but which is the best? Preferrably would like one that is not very "grippy" and has as little orange peel effect as possible.
View 49 Replies View RelatedMy HTC Magic appears to be a massive fingerprint magnet. On my iPod Touch I have a Zagg Invisible Shield which helps a lot at preventing fingerprints.I think there is an Invisible Sheild coming soon for the Magic, but I only really want to cover the screen.Is anyone using a screen protector at the moment and does it help with fingerprints?
View 4 Replies View Related