I try to make a repeater connection with an encore repeater router but the router recognize or detect the wifi signal of the phone and don't make a repeater connection. I test the router with others wifi signals and in make a repeater connection. The icon of the phone in the computer signal detection is like a home group connection.
View 2 Replies
Is it possible (is there an app) to use my desire as a wireless repeater. So my phone connects to the router and my computer connects to the phone.
View 4 Replies View RelatedCan the RAZR MAXX be used as a wifi base station for a wifi bridge/repeater (NOROOT) - not tethering. i'd like to extend my lan network over my droid. I get full 4G in my house 20-25Mbps average, and i don't need cable internet. I have been using usb/wifi tethering for months and would rather use my Netgear B/G/N router's bridging function to connect all of my devices rather than the radio on my droid.
OS 2.3.6
kernel 2.6.35.7-g61e3522
build 6.5.1-167_DHD-14_M2-5
system 6.12.173.XT912.verison.en.us
I have an HTC Hero200 that my tenant threw into the pool. I recovered the phone after about an hour or so and figured it was trash. Several hours later it lit up with HTC on the phone. I figured WTH and pulled the battery and left it to dry out. I put it in a bag of rice and left it for several days. I took it apart and wiped the screen, window, and all connectors with alcohol and let it sit open for several hours. When I power it up, it says HTC and every once in a while it briefly shows a butterfly on the display for a few seconds and then reboots.
I am not an android user, but in searching the web figured out how to get it to boot using the power button and volume key. When it comes up is says touch panel fail. When I go th HBoot Mode, it says "no image or wrong image" for all the files it scrolls through. Is it possible for me to recover this phone and use it for a media player and camera?
I've had my X10 mini for a few weeks now and it's been working fine, but this weekend i noticed that when i plugged it in to the mains using the charger it failed to start charging. I also tried just using the USB connection with my PC but it also doesn't recognize it. My phone has now died and i have no way of making it work again! Infuriating! Has anyone else had a problem with this? The way i see it, i either have a faulty charging cable or the micro USB port has failed (a problem i jhave read is common in the x10?)
View 1 Replies View RelatedWhile trying to sbf my Milestone X2 using RSD Lite v5.7 (I used an sbf file named "1FF-daytona-user-2.3.5-45.0.25-111011-release-keys-signed-ntelos-US.sbf") I encountered an error that said: Failed flashing process. phone[0000]: error switching phone to BP Pass through mode (0x70BE)
This Is what my device properties were
IMEI/ESN/MEID: N / A
Technology: N / A
Software Version: N/a
Flex Version: N/a
Bootloader Version: v0x000007
DRM Version: N / A
This is what my file properties were
Filename: 1FF-daytona-user-2.3.5-45.0.25-111011-release-keys-signed-ntelos-US.sbf
Creation Date: 09/18/2012 22:44:49
File size: 861170104
RAM DL Version: N / A
Bootloader Version: N / A
Platform: 4G TEGRA
HAB Type: Signed Production
Animal Sound Machine tags "baby, kid, childreen"Animal Sound Machine | AndroidApplications.com
View 1 Replies View RelatedI'm using the Android APIDemo sample code.
When I run the CameraPreview example, at first it was giving me an error.(http://stackoverflow.com/questions/2556389/android-camera-functionality-howto)
I traced that one down and the sample was working for a while.
Now, it no longer works. It says ERROR/AndroidRuntime(2949): java.lang.RuntimeException: Fail to connect to camera service
What can be causing that? It happens when camera.open() is called.
When it comes to smart phones and flashing. I recently got a HTC Evo and had it flashed to be on metro pcs to try and save a little cash on the bill. Well I think I am learning you get what you pay for. I am hoping I can get some tips or tricks from this forum. My phone will not run any apps really. It wont connect to facebook or the app store or google maps and youtube. Basicly all the social apps dont work. However if I connect it to WIFI it will run it them. Is it cause metros data service sucks.
View 7 Replies View RelatedEvery time i increase my database version and push the upgraded app to the users, something weird happens.. For some it works perfectly fine, and some report crashes (including through the Market's reporting system) caused by the lack of table columns i just added in onUpgrade.
If you want to see the method:
http://code.google.com/p/tag-todo-list/source/browse/trunk/Donut/src/com/android/todo/data/ToDoDB.java#136
I can't spot any exceptions that appear in onUpgrade. What i'm currently doing to bypass these problems is intercepting the exceptions where the new fields are invoked for the first time and then calling onUpgrade 'manually', which is kind of dirty.
Also, the app sometimes generates a 'no such table' SQLiteException when accessing the main table (again, only for some users) which is incredibly strange... Does someone know why these things happen? Or can you spot something wrong in my code?
Was it meant to fail? Each time I try to upload a pic it tells me to enter an account or make a new one, it jumps from the caption enter page to the new account setup screen...
The regular gallery app is limited to flickr which I don't use, I don't use Picasa either but keeping all else google at least makes it easier to integrate later on... I don't use facebook either... Heaven would be imageshack for me, so what does one do in this dilly of a pickle?
I have a problem with my Motorola Droid; When i try to go onto one of my droid apps; and when i log on... it says "Login fail" WHat cando i have to do in order to go back to being able to login to my apps? This includes my Meebo app, Yahoo Messeneger app. and my photobucket app will not let my download a pic. to my phone, I use to be able to do all of this, but now it isnt working.
View 2 Replies View RelatedTitanium Backup is acting weird.
Here's the story:
Was on E.E. 3.0. Wanted to try XTR.
Backed up all apps to Titanium backup. Successful.
Made a NAND backup. Successful.
Wiped, flashed XTR. Successful.
Downloaded Titanium Backup again from Market and opened it. Initially, did not show my apps in the backup folder, although the Overview screen did show that the sd card was identified, and the folder was named correctly.
Restarted Titanium Backup, all the apps then showed up, and I was able to (slowly - free version) reinstall all the apps. SUCCESS.
Ran XTR for a few days, added some more apps, made new backup of all the apps with Titanium Backup.
BUT! TOday, I had a problem with XTR. Some account hung on syncing, started to drain the battery, and wouldn't allow me to open the accounts & sync pref panel - kept FC that panel.
So, I decided to revert to my NAND backup of EE3. That went fine, all good.
But when I opened Titanium backup to load the new apps from the past few days, TItanium said no apps were backed up! Everything looks correct, except the backup/restore tab shows only the apps on the phone (from the nand backup) but not the apps that are on the card in the backup folder.
SO how do I restore them. Is titanium acting wrongly, or am I not understanding how it works?
I downloaded the SDK 2.0 toolkit and tried to launch the android tool to download the latest SDK. The application seems to launch with the following output:
$ ./android-sdk-mac/tools/android Starting Android SDK and AVD Manager No command line parameters provided, launching UI. See 'android --help' for operations from the command line. $
That's it. Nothing happens, no UI appears or any processes are started (check with ps, but there is no new java process). I'm running this on Mac OS X 10.5.8. The previous SDK s runs fine.
I got busybox pro from the market but when I try to smart install it, it shows free space as 0.0mb whereas I have around 500 my left.
AUXUS Nuclea N1
I tried modding some APK to make the app able to be multi view (tutorial : URL... ), I succeed modding 8tracks.apk, musicxmatch.apk but then when I tried to do it to LINE (NAVER) and installed it, it said "app was not installed".
It is a system tool while building the apk, and it still doesn't work.why some people said to not sign a system tool apk? while from what i've read, android cannot install an unsigned apk. mod the NAVER/LINE Games to stop checking if i am a rooted device?
I wanted to root my new galaxy victory 4G LTE from Sprint and put a custom rom on it. Followed rooting guides and that worked fine. Then I went to find a rom that would work and all I found was victorious, which I was so eager to try I didn't even think to read that part that said VM only. Got stuck in a boot loop. That's where I made the real mistake and decided to try a rom for another galaxy model, a custom s3 rom. Ever since that my touchscreen has been unresponsive, soft buttons and hard buttons work though. Using ODIN I've tried to restore to stock, I've used KIES to try to update, and everything has worked as far as I could want it to, but nothing restored touchscreen functionality. I am able to get into the hard button guided recovery menu and download mode, but have been unable to get anything touch based to work, and cannot find a CM non touch recovery that will work with this phone.
View 3 Replies View RelatedI have a clone Samsung Galaxy Note II N7102,
That's chip MTK 6577, but I can't load the rom on it.
The error message is firmware & chip set not match.
This isn't really Incredible specific -- more of a general Android 2.2 complaint, but the inability to access Google Voice Actions/Search over bluetooth is a HUGE missed opportunity by Google, in my opinion. I mean, I LOVE the new voice actions -- it's such a great feature and really makes the phone easy to use. However, it's inability to work over bluetooth makes it difficult, if not impossible to use in the car -- a place it would be perfect for. If you want to use it in the car, you basically have to scream loud enough so the phone mic can pick you up over the road noise and it also requires holding down the search button to initiate, so it's not exactly hands free.
As it stands now, if you access the phone via Bluetooth, all you get is the voice dialer, which only provides the ability to dial names and numbers via voice commands. Imagine if you could access voice commands via bluetooth and create text messages and emails while driving, notes to self, get directions, etc. Since voice actions can also handle calling contacts, I'm not even sure what remaining value the "voice dialer" has over the Voice Actions/Search functionality. At a minimum, Google should at least provide a setting for specifying which voice app (voice dialer or voice actions/search) would be accessed when connecting via bluetooth.
Anyone know if it would be possible for a developer to come up with a custom application that would allow voice actions via bluetooth? My guess is that Google will fix this eventually, so maybe I just need to be patient. It just seems like it would be relatively easy and could be included with an update to the Voice Search app.
I just changed my google voice number to a google number today from the random number I had before. But now I can't call it from any 216 area code. This creates a problem because my phone is a 216 area code. So I can't call my own voicemail - It just says the number cannot be completed as dialed. When I call from a different area code it's fine. No contact groups or anything are blocked and I can call out. I'm stock and haven't rooted or anything.
View 22 Replies View RelatedI apologize in advance for this long post, but it's necessary to show what is happening.
I've been working on an app that works on the 1.6 emulator, but bombs on my G1.
Here is the Photographer activity:
CODE:..........
And here is where this activity gets called from:
CODE:............
Having trouble pasting the relevant portions of AndroidManifest.xml, but I have permissions for Camera:
CODE:..........
Here's the Photographer part:
CODE:..............
Also set for testing on G1:
android:debuggable="true"
and working off of 1.6:
<uses-sdk android:minSdkVersion="4" />
All this works on a 1.6 emulator, but when I run this on the G1, LogCat shows:
CODE:.............
And /data/anr/traces.txt shows:
CODE:................
It sounds like the problem is a timeout issue, but I am at a loss as to where I should be looking ....
I had my camera set to this.setRequestedOrientation(ActivityInfo.SCREEN_ORIENTATION_LANDSCAPE); and it works fine but if I change it to PORTRAIT instead of LANDSCAPE then it crashes with the following error...
CODE:............
The method it crashes in is..
CODE:.........
It crashes at mCamera = Camera.open();
My Manifest file has <uses-permission android:name="android.permission.CAMERA"></uses-permission>
How do I fix this so I can view my app in Portrait?
Quite mystic issue with my Hero. Never dropped my phone and always handle it with care. Suddenly couple a days ago with normal daily usage screen goes black. I think it was a normal crash and pull out battery for reboot. Device rebooted normally but when it comes to SIM Unlock screen there was only empty boxes without numbers so I again pull out battery and now phone stucks in Hero splash screen almost 10 minutes and reboots over and over again. If I boot up with pressing down HOME and Power nothing happens. it just again HERO Splash and boot loop. When I press BACK and Power in FASTBOOT-menu there is TOUCH PANEL-fail. I think my touch screen is broken or there is some other things totally messed up (???) but what confused me is why I cannot access recovery mode with HOME + Power. Anyway I reinstalled Stock ROM in Fastboot-mode but phone is still in bootloop.
View 3 Replies View RelatedI was unable to install Maps.apk into emulator cupcake. I've tried 2 method, both are failure. 1. adb install Maps.apk --> [INSTALL_FAILED_MISSING_SHARED_LIBRARY] 2. Copy Maps.apk to /system/app/, com.google.android.maps.jar to / system/framework/, com.google.android.maps.xml to /etc/permissions/ Map application is still invisible, can anyone help me how to accomplish this issue. Or there's other security issue?
View 2 Replies View RelatedWell, that is about the only negative I can think of...... Oh yeah, it does not have a keyboard, either
May be a tad big, but very nice device
One thing that our EVO friends touted, but could not back up (hidef video) IS possible with the X. The 45nm chipset makes a huge difference in regards to heat output. How practical it is would be another story, but still- nice device.
Is the microsd blocked by the battery on the X? I hate that.
added:
Perhaps a better way to word it for the hidef is QUALITY hidef. EVO, like all other devices that use the snapdragon, sux for hidef output, due to the 65nm chipset not handling the heat well.
I do not know what is cause of failing to create a new file on a sdcard of G1, the code is below:
File temp = File.createTempFile("test", ".temp", Environment.getExternalStorageDirectory()); and the permission of sdcard is: d--rwxr-x.
Also fail if I try using the code below:
File file = new File(Environment.getExternalStorageDirectory (),"media.temp"); file.createNewFile();
Giving out about Parent directory of file is not writable.
I'm struggling to understand why startActivity runs properly when copied from a tutorial I found and fails when I make the smallest change.
Code from the tutorial:
CODE:........
That works. When I try to change it to what I would consider a simpler design, I am getting an error.
CODE:........
The error is: The constructor Intent(FirstTwoApps.ButtonHandler, Class) is undefined
Notice that all I did was moved the action from the handleButtonClick() method to the onClick() method. Apparently that is not allowed, but I don't understand why.
When i create android project in Eclipse(Helios) and open for example main.xml and click on layout view - program closes. If i start eclipse over again and try click in project view on main.xml it happens again.
View 3 Replies View RelatedI have installed Sipdroid into my android emulator 2.1. And i created users in Asterisk server. Then added the user account and password and other infor (like IP of Asterisk) into Sipdroid account (in emulator). But it could not connect to the server, it always fail to connect.
View 2 Replies View RelatedI'm trying to get a sense of how many people have encountered an issue with their Droid's screen not working, though everything else on the phone is apparently fine. It's happened to me a few times, and the screen won't show any picture, but the touch sensor & haptic feedback are all still working, and the phone has connectivity because it receives messages & calls. The weirdest thing is, it will come back after a period of time & work perfectly as if nothing ever happened.I've see a number of other threads on the forum that indicate a similar problem, so I'm trying to get some sort of sense as to how many people have experienced this. It seems like there's a design flaw in the Droid, because it doesn't seem to be caused by actual hardware damage since the screen will come back on & look perfectly normal.So, if you've experienced this issue please post here, or if you've found a thread on this please post the link.
View 9 Replies View Related