When I try to connect to 4g it says there is a network available but stays stuck on the 'obtaining ip adress' screen. I am located in Orlando which is one of the upcoming cities for 4g. Does this mean that the antenna is there but not yet strong enough or what?
View 13 Replies
I have a problem with my Wi-Fi connection. I turn on Wi-Fi, go to Wi-Fi settings and under the list of found networks is my home wireless. When I try to connect to it, it goes as far as "Obtaining IP adress" and after that it fails. I thought this was because I was using GalaxHero, but now I went to using Mustymod's 2.0 and the problem is still there.
View 23 Replies View RelatedI live off Old Winter Garden and Apopka Vineland and I was outside working on my car and noticed I had two bars of 4G on my phone.Awesome! I used the Speedtest.net app and tested at 2264k down and 886k up.I left it on and drove down to the WalMart by Health Central and picked up 3 bars briefly but didn't test the speed.What's sad though is I only get one bar of cell service in my house. I'll test out 4G inside when I get home.
View 4 Replies View RelatedIf I connect two android power real-devices to a LAN through WiFi,then what are their IP adress?How can then find each other by IP address?are their IP address 192.168.0.*
View 5 Replies View RelatedI've just bought a new HTC Tattoo, and I want to hook it up with the network in my home.I've got a mac adress filter on my router, but I dont know how to find the mac adress on my phone? Or, does it even have a mac adress?
View 3 Replies View RelatedI am thinking about dumping my Iphone and buy me a Droid. But there are some things I need to know first.I was wondering which sender adress the gmail on the droid is using.I have 3 different in my gmail account.Is Droid always using the default or can I switch between them?
View 18 Replies View RelatedI just bought my wildfire today and I have trouble setting up the wifi connection here at home.Everytime my phone tries to connect to the router it times out while waiting for the IP-adress to be assigned.Anybody have any ideas what might be causing this?
View 1 Replies View RelatedI have been trying to send a text message to an email adress using handcent but haven't been able to? Is it possible to do this? I also thought that I read that you could do this using the stock messaging app, but haven't been able to figure out how to do it there either. Does anyone know how to do this, or have any suggestions on other apps that can.
View 2 Replies View RelatedI'm planning to buy a new phone next week (last one got stolen), and I'm kinda thinking about an android one. I've got three requirements: -An easily manageble "to do"-list om the home screen (e.g stickynotes) -A good calendar (which may or may not be able to sync with google calendar, no biggie!) -Ability to sync my adress book with an online server (google sync?) every month or so...(That was two years' worth of contacts, damnit Anyway, my question is this: Would an android phone really be the best choice for me? I'm kinda on a tigt budget, and I've heard horror stories of Android phones/Iphones having to connect to the net every day or so... But the only thing I really need the internet for is for syncing (the adress book once a month, the calendar every week or so), checking my mail now and then and for downloading the occasional app (e.g. stickynotes).
View 10 Replies View RelatedI am right outside Chicago and have yet to be able to connect to 4G. I seems like the Evo is starting to connect to 4G, but then just sits with the message of "Obtaining IP address from Sprint". I have left it in this state for 30 mins, and nothing happens. Does anyone know if this is a fault of the phone, or maybe a lack of coverage?
View 23 Replies View RelatedI was hoping someone could give me instructions to obtain the *exact *source code for the current SDK. What I have so far is as discussed here; http://androidforums.com/android-developers/1045-source-code-android- By using commands such as; repo init -u git://android . git . kernel .org/platform/manifest.git -b android-sdk-1.5_r3 jar cvf ../android-src.jar -C core/java . etc. my issue is that the source is still inconsistent, some extra methods are available and some are not. For example, I want to make a progress bar with two sliders (To select a range) but the version of Progress bar I have; http:// android .git.kernel.org/?=platform/frameworks /base.git;a=blob ;.http://android .git.kernel .org/?p=platform/ frameworks /base.git;a=blob;> I cannot mimic (as an initial implementation), despite using the same package and extending View I do not have access to 'mMinWidth' for example. In addition the progress bar uses methods of the class StateList Drawable which are not available in this SDK (e.g. getStateSet(int i)). It's obvious that there's an inconsistency between the source I have and that which was compiled into the android SDK but I don't know why given my GIT repo commands. Can someone link to the version of ProgressBar which was shipped with android-sdk-1.5_r3? Has anyone managed to get the branch which maps directly to this release? This might well be due my inexperience with Git, please let me know if anyone has this set up correctly and I will try again. I seem, in all honesty, to have the head revision still.
View 6 Replies View Relatedwifi was fine at first but now when i turn wifi back on it says remembered secured with wps/wpa2 psk
obtaining ip address but then after a few mins says unsucessful this is with the phone next to my router!
also under settings - wifi settings i have no advanced tab to set my router time out? where is it?
Object getThisObjName= new Object();
I'd like to get the name of an object reference.
Is this possible via reflection in Android?
I have a HTC Tattoo (indian version). When I enable Wifi its not able to obtain the address from the router. If I provide a static IP it works fine.
This problem started after I tried to connect to a open network (may be). Before that it was working fine with my home network without providing the static IP in advance Wifi-settings.
I'm trying to develop a little game, with 2D Graphics. I want my "gaming board" to be at a specific position on my screen, so that I can display in-game informations above and below the box. But since there is beginning to be a lot of Android phones out there, I was thinking about getting "dynamic" values so that I can adapt my font size to every device.
My game is not in full screen (but it could be, it's no big deal), but in a window with no title bar.
I'm using an extension of the default SurfaceView class, implementing SurfaceHolder.Callback. I tried writing the following method :
CODE:................
But the values returned are zeroes.
(even if it means changing display strategy) ?
Dinc will not obtain IP....I just updated to 2.2 and it worked fine .....then i made changes to my router......turned all the security OFF.....
Does the Dinc hold old info on a current connection? if so can i delete a connection and start fresh....more than just "forget"? Should I name my Routers SSID?
After I reboot my Desire,it stay in "obtaining IP address from xxxxx" for a very long time,and will never finish this work. Why? Here is the Wifi software version and screen shot when it working.
View 7 Replies View RelatedI am trying to decode and obtain all frames in a video stream, each of which would be processed by a native signal processing engine and re-encoded back to a MPEG4/MP4 file. I noticed that there was a getFrameAt() function in earlier versions of SDK but its not available in v 1.6 on which I am working. As I am fairly new to Android, I would like to know from more experienced people around here as to how I can extract video frames into a buffer for processing.
View 2 Replies View RelatedI want to obtain the index of the selected item in a spinner.
I am aware of the method getSelectedItem() which returns the item selected (which might be a String). But i want the index of the selected item.
Something equivalent to the setSelection(index) to set the selected item.
Of course I can get the selected item and compare it against the array of items to obtain the index, but I hope there is a better way of doing this.
How can I get/calculate current process CPU usage? ActivityManager provides method that returns a list of all active processes (list of RunningAppProcessInfo), but that class doesn't provide any CPU usage information.
View 10 Replies View RelatedIs there any way to programmatically retrieve data that reports on application usage as shown in the Spare Parts application? I know what calls need to be made, but it seems that they all use internal APIs...is this true?
View 2 Replies View RelatedIs there a method of obtaining the field of view for a phones camera (horizontal and vertical)?
View 2 Replies View RelatedI can't find a tutorial online that gives me the step by step process on how to generate a suitable key using the keytool in the JDK.
This: http://developer.android.com/guide/publishing/app-signing.html
Talks about it and gives commands, but it doesn't actually say where and in what folder to key in the commands. I am sure I am missing something easy here, but could anyone guide me to where I need to start with this?
I have following code:
CODE:...........
Code is working but here goes my problem: when I call it from main activity in this way:
CODE:........
Then i can see 10 times result of 'doing sth else!!!' and when loop is over i can see then result from activity. So sensor activity waits for some reason and then when main activity has nothing to do, sensors are doing their job.
of course I have well implemented: onActivityResult(int requestCode, int resultCode, Intent intent)
I want to read sensord data directly, not using listeners, is it possible?
Now that SENSOR_ORIENTATION is deprecated, what's the best practice for obtaining compass reading? The old way was so simple.
View 1 Replies View RelatedBoth of my android devicea, a razr and a galaxy tab 7.0 plus,are havingtrouble connectingto our wifi. the tab is on honeycomb, the razr on ics. assigning a static ip addressworks for about five minutes, then although the phone says connected, no connection works. during those 5 mins, i can browse the internet but cannot connect via dlna to other devices. when using dhcp dynamic ip address, it just cycles through obtaining ip to disconnected . i ued to use dlna daily, but no luck now, and the static ip is the only solution i can fimd online. This phone has used dhcp before, and theres no reason that it shouldnt be able to now. Both devices run standard roms.
View 3 Replies View RelatedI had to factory reset my router and now when i try to connect my phone to the wifi all i get is "Obtaining IP address".
View 9 Replies View RelatedUsing a Linksys wireless router with a WEP encryption at home. Every time I try to connect my phone says "Obtaining IP Address" and then after a short time it fails.
-Yes, my phone recognizes the router.
-Yes, I have the correct key.
-Yes, I have reset my router and modem, no change.
-Yes, I have restarted my phone.
-Yes, my phone connects just fine to unsecured wireless routers.
-No, I cannot find another thread that has solved this issue.
I have a HTC Hero - T-mobile. Ok the problem, is i used to be able to connect to my wifi router no problem, its a netgear. "remembered, secured with WPA-Personal" and for some reason, it just wont get passed Obtaining address... So its connecting? but cant establish an IP?
View 8 Replies View RelatedI'm trying to connect my phone to my network so I can use wifi. I found my network and entered the correct password and it will say its obtaining an ip address but then after a few seconds it will say unsuccessful what am I doing wrong?
View 7 Replies View Related