I have had no problems in the last 6 months connecting my evo to my uverse router until yesterday. I went out of town for the weekend and ever since I have returned my phone will not connect to my router.I have "forgotten" the network and re-entered the password but that didn't fix the problem either.It just says "obtaining IP address".
View 2 Replies
Just got the EVO 4 and everything seems to work OK, except that my PC (Windows 7, 64 bit) cannot see it when I connect to my home wireless network. The EVO 4g says it is connected to my network OK, but the phone doesn't appear as a device or drive anywhere on the network where I can see it. USB connection works OK.
View 3 Replies View RelatedI have a new Droid Incredible (upgraded from Eris ) but I cannot connect to an ad-hoc network I have setup. With wi-fi turned on, I scan for networks and nothing shows up. I even manually entered the network name and no security (which is how it's setup right now) and it still does not connect.
View 4 Replies View RelatedJust upgraded to Android 2.1, all seems fine but a wireless network I could connect to and browse from prior to the upgrade is connectable but will not complete the page download.
View 1 Replies View RelatedI cant connect to my wireless network.I cant find the settings to put the following details IP : 1.2.3.4 ( I can put)
View 9 Replies View RelatedCan X10 connect the Ad-hoc wireless network? Could you tell me the X10 only connect with Access Point Wireless Network?
View 4 Replies View RelatedEver since flashing the 2.1 leaks (V1 and then V2), I have not been able to connect to my university's WPA2-enterprise wireless network. After I enter my login info (the network uses PEAP with MSCHAPv2, so it doesn't need any certificates), the phone connects as expected and gets a valid IP address, verifiable with netcfg. Before any traffic is allowed to pass to the outside world, however, the device connecting has to go to an authentication page in a browser. When I attempt to go to that page, I get an error titled "Data Connectivity Problem" that states "A secure connection could not be established" which only presents an option to acknowledge the error.
Since I can't load that authentication page, the network is entirely unusable. I did not encounter this problem with 1.5, but since I'm running the V2 leak, reverting is not an option.Has anyone else seen this type of behavior? I can't identify if the problem is in the actual link not being established properly (seems unlikely, as the phone is given an IP address, but perhaps the PEAP layer is having some sort of issue?) or if it has to do with the SSL certificates used for the network authentication page (they're signed, but I'm fairly certain that the name if the site they're signed for is not the name that they've given the new auth server).
I've experienced quite a lot of problems with the WiFi after updating the Andriod. Everytime I try to connect to my home-network i get that it failed to connect.
The phone didn't have any problems with this before the update.
Anyone had the same kind of problem, or anyone that has a smart fix for it?
I love my aria, i got it 9/29/10, for free from best buy because my contract expired... but ive already used 20MB and i only bought a 200MB plan... i might go to 2 gigs, but for an alternate, since my billing cycle ends the 28th of every month... if i disable application syncing, and mobile network from the hold menu... can i connect to my home wifi network, and go on the internet from there without that using any of my data plan?
View 5 Replies View RelatedI've written app for tablet. My app uses external devices like RFID reader and thermal printer. But devices are connected to the tablet using wired USB hub, then USB2Serial converter (FTDI or Prolific) and then device. I'm talking with them sending/receiving simple bytes to/from virtual port in Android. It works great.
But now I'm thinking about making such solution more mobile. I would like to have wireless USB hub, and tablet without any wires.
I have found such devices:
Belkin F5U301
Cables To Go Wireless USB Hub
and a few more.
Unfortunately, none of them have Android support.
I think, there should be a special driver for receiving wireless data and connecting such data to the virtual port in Android.
Theres a uncured network outside my house and whenever I leave for a while and come back my evo automatically connects to it even though I always click it and press forget than manually connect to mine again but whenever I leave and come back I have to do it all over again. What can I do to avoid this.
View 8 Replies View RelatedQuick one - does anyone have an app which allows you to turn your Wireless on and off at the click of a button? I dont want mine on all the time but have to go through the menu to turn it on when I get home and want to browse.
View 3 Replies View RelatedWe have multiple Android phones, including my Incredible, in our house on our wireless network. Is there a way to assign a name to each phone so that they are identified on the router like computers and other devices are? Currently the Android phones just show up as "unknown" device. The Wi-Fi is secured with 128-bit encryption, so I'm not concerned with the neighbors connecting, but it would be nice to be able to see which phones are on the network at any one time.
View 2 Replies View Relatednew here but have been a reader for some time.I'm trying to figure out if I can setup up a wireless network for my other laptops in the house to run off my desktop and my G1 usb tethered to PDANET?In other words I have no cable or dsl but can I connect my lynksys wireless router to my desktop while it's connected to my G1 and somehow create a wireless network to share?
View 2 Replies View RelatedI've just moved house and got a new internet connection. Formerly my Magic was connected to my wireless router and all was well. It still connects to wifi hotspots etc. but it just can't see the new one. Two laptops and one notebook all work, as does my wife's iPhone. I'm not sure where to start looking. I can get into the router and mess about with the wireless settings if necessary.In particular, these look interesting. Currently set to the defaults: Code...
View 4 Replies View RelatedI have my home wireless set up with WEP and it automatically connects. However, when I get to a place with open wireless how do I connect to it? The SSID does not show up so even if I go to add a new wireless connection it asks for the SSID and I have no way of knowing. Am I missing something very simple?
View 1 Replies View RelatedIn order to connect to my company wireless network, I need to import a certificate. How can I do that without access to the internet? I have the certificate as a file, but I don�t know how to install it on the phone.
View 1 Replies View RelatedI have a wi-fi adapter and I can make an ad-hoc network from my PC but can't use it as an access point via Connectify or Virtual Router. I tried getting a physical router, but had so many problems that I eventually gave up! I know there are lots of programmers out here, so can anyone put up a hack/mod for supporting ad-hoc networks on the Droid 1?
View 7 Replies View RelatedBeen running with my Droid now for 3 weeks and I'm finally going to start playing with running wifi at work (my cube and only my cube I have 3g issues ) and I connected to it a couple days ago. Our network admin in his infinite wisdom created a pass key that is like 46 characters long. So I entered it, and was connected. Fast forward to today, I enabled wifi again and tried connecting to the network and it asked me for the pass key again. Does it now save that? Is it supposed to? I would assume that would be a pretty big PITA that every time I want to connect to wireless network that I've connected to before it re-asks me my password.
View 2 Replies View RelatedI recieved my HTC Desire 3 days ago, and I really like it, but I have 1 problem.Where I work we got a open wireless network with password protection when you open your web browser. I got no problems connecting to the network, but I dont get the pop-up box where I have to write in the password. Tried with the built in browser and opera mini, but neither of em work.Anyone else got a problem like that, or any idea how I can get this working?
View 7 Replies View RelatedMy work's wireless router is setup to be WPA Personal as well as non-broadcasting, TKIP I see nowhere in the phone's wireless settings to configure for this Does anyone know if there is a way that I may be missing or an app that works well (pref free but I don't mind paying)
View 19 Replies View RelatedI recieved my HTC Desire 3 days ago, and I really like it, but I have 1 problem. Where I work we got a open wireless network with password protection when you open your web browser. I got no problems connecting to the network, but I dont get the pop-up box where I have to write in the password. Tried with the built in browser and opera mini, but neither of em work. Anyone else got a problem like that, or any idea how I can get this working?
View 11 Replies View RelatedI recently bought a HTC Magic. At work, we have a secured wireless network. When connecting to this network, we are asked a username/password for the domain. Now, my question is; With my HTC Magic, how can I connect to the domain network? On my previous HTC (S710 or 720, with WinMob) , it was possible.
View 1 Replies View RelatedHow do I simulate a WiFi network using the Emulator?
View 2 Replies View RelatedI have a problem with a brand new Galaxy i9000 and the wifi. I have managed to add one wifi network to it that I use at home. I have a second wifi network that I want to add, called cat, but when I try to add it from the Add wifi network place, it gives the error: Unable to save the network. i have tried a power on and off. Is there a maximum number of wireless networks one can save, or is there a problem with my actual 'phone? The phone is very laggy as well, and almost impossible to use when 3G is active. (Load averages are as high as 30 sometimes).
View 1 Replies View Relatedcan i display wireless network name on the menu bar?
View 2 Replies View Relatedi downloaded the newest version not from the market from google and i can find it when i search for a connection but it wont connect to the internet its limited tried computer and ps3 also it i tried the second to newest
View 4 Replies View RelatedSo today i left the iphone world and got a HTC ONE, i like the phone so far but I can not get my phone to connect to my wireless network, I see the network but when i enter the password it tells me the password is incorrect, the password IS correct and I have even changed the password 2 times to try and connect. on the phone it cycles through authentication and connecting three times then it tells me its not the correct password. I went to a friends house and connected to his in one second.
View 6 Replies View RelatedI'm having an issue with using my Eris while connected to my home wifi network. The problem is that after I successfully connect to my network, I am unable to browse the internet, access the Market, or use any music apps which require internet access. I have verified that my phone is capable of doing all of this while connected to an unsecured wifi network, however, my network is secured. I'm not sure if that's what the issue is.A little bit of info about my home network - I have a Motorola SBG900 cable modem w/built-in wireless access. I have it setup for b/g network, WPA/PSK, etc. The strange thing about this is that I have two laptops, & my iPad setup on the same wireless network and all of them are able to access the network with no issues.
View 5 Replies View RelatedIs there anyway to allow data transfer over a wireless networ between the galaxy and a computer? I currently can't find my transfer cable and when I email myself songs and download them onto my phone, they are stored as a .mpx which play fine untill the phone is turned off or otherwise refreshes. After this, when trying to play the .mpx files an error message saying"No applications can perform this action" despite the songs playing fine only minutes before.However it would be damn useful just to connect my phone to the network, but while it connects, it doesn't appear in the devices connected to the network.
View 2 Replies View Related