HTC Droid Eris :: Unable To Connect To Campus WiFi (WPA2 Wireless Network)
Apr 28, 2010
Ever since flashing the 2.1 leaks (V1 and then V2), I have not been able to connect to my university's WPA2-enterprise wireless network. After I enter my login info (the network uses PEAP with MSCHAPv2, so it doesn't need any certificates), the phone connects as expected and gets a valid IP address, verifiable with netcfg. Before any traffic is allowed to pass to the outside world, however, the device connecting has to go to an authentication page in a browser. When I attempt to go to that page, I get an error titled "Data Connectivity Problem" that states "A secure connection could not be established" which only presents an option to acknowledge the error.
Since I can't load that authentication page, the network is entirely unusable. I did not encounter this problem with 1.5, but since I'm running the V2 leak, reverting is not an option.Has anyone else seen this type of behavior? I can't identify if the problem is in the actual link not being established properly (seems unlikely, as the phone is given an IP address, but perhaps the PEAP layer is having some sort of issue?) or if it has to do with the SSL certificates used for the network authentication page (they're signed, but I'm fairly certain that the name if the site they're signed for is not the name that they've given the new auth server).
View 5 Replies
Aug 26, 2010
So my droid eris won't connect to my wifi network. I have a dual band netgear router. It works with everything else except the eris. my xbox 360, nintendo wii, macbook pro, and multiple windows computers all work fine. My itouch connects to it nd so do all my other friend's android phones. I know my wifi on my phone works because I can use it on any other network. It seems to me that the wifi driver (do phones have drivers) needs to be updated. Is this possible?
View 8 Replies
View Related
Jul 31, 2010
I have a stock inc and for some reason it won't connect to my home WiFi network. It will connect to other wifi networks. I turned off WEP just to take that variable out of it. No idea what the problem is. I have also hard reset it.
View 6 Replies
View Related
Dec 1, 2009
I know wi-fi has been mentioned but no one seems to really know. Is there anyone out there who knows why I cannot connect to my wi-fi at home? I have a mac address filter on my router and I put in the correct mac address of my Eris more than once as well and the security settings. I was able to connect my Nintendo DSi with no problem. So when I set up my wi-fi connection, it says it's not in range but remembered. At my job I was able to connect to the wi-fi with no problem. Could it be something with my router? Just wondering if anyone has any ideas or clues.
View 3 Replies
View Related
Aug 28, 2010
I am using laptop and connected to wifi network. I have started the android emulator and open the browser to browse. But it is not working. thrown error saying network connection not available. But I am able to browse in my laptop. How I can enable emulator to use wifi network for internet?
View 2 Replies
View Related
Nov 8, 2010
I have had no problems in the last 6 months connecting my evo to my uverse router until yesterday. I went out of town for the weekend and ever since I have returned my phone will not connect to my router.I have "forgotten" the network and re-entered the password but that didn't fix the problem either.It just says "obtaining IP address".
View 2 Replies
View Related
Jul 24, 2010
Just got the EVO 4 and everything seems to work OK, except that my PC (Windows 7, 64 bit) cannot see it when I connect to my home wireless network. The EVO 4g says it is connected to my network OK, but the phone doesn't appear as a device or drive anywhere on the network where I can see it. USB connection works OK.
View 3 Replies
View Related
Sep 21, 2010
I have a new Droid Incredible (upgraded from Eris ) but I cannot connect to an ad-hoc network I have setup. With wi-fi turned on, I scan for networks and nothing shows up. I even manually entered the network name and no security (which is how it's setup right now) and it still does not connect.
View 4 Replies
View Related
Jan 19, 2010
I have my home wireless set up with WEP and it automatically connects. However, when I get to a place with open wireless how do I connect to it? The SSID does not show up so even if I go to add a new wireless connection it asks for the SSID and I have no way of knowing. Am I missing something very simple?
View 1 Replies
View Related
Nov 7, 2010
I've experienced quite a lot of problems with the WiFi after updating the Andriod. Everytime I try to connect to my home-network i get that it failed to connect.
The phone didn't have any problems with this before the update.
Anyone had the same kind of problem, or anyone that has a smart fix for it?
View 1 Replies
View Related
Oct 4, 2010
I love my aria, i got it 9/29/10, for free from best buy because my contract expired... but ive already used 20MB and i only bought a 200MB plan... i might go to 2 gigs, but for an alternate, since my billing cycle ends the 28th of every month... if i disable application syncing, and mobile network from the hold menu... can i connect to my home wifi network, and go on the internet from there without that using any of my data plan?
View 5 Replies
View Related
Jul 26, 2010
Has anyone else noticed that when they turn WiFi on through the widget (either android or motorola one) it doesn't always actually turn on wireless?
I usually have to go to WiFi settings and then once I do that it connects to my router. This will keep happening until I restart the phone and then the widget will work another 1-2 times and then I'll have to go into the settings menu until I restart again.
Unrelated: Has anyone else had their 3G dropout today or is it just me? I'm in the northeast.
View 3 Replies
View Related
Dec 1, 2010
Just upgraded to Android 2.1, all seems fine but a wireless network I could connect to and browse from prior to the upgrade is connectable but will not complete the page download.
View 1 Replies
View Related
Mar 31, 2010
I cant connect to my wireless network.I cant find the settings to put the following details IP : 1.2.3.4 ( I can put)
View 9 Replies
View Related
Oct 21, 2010
Can X10 connect the Ad-hoc wireless network? Could you tell me the X10 only connect with Access Point Wireless Network?
View 4 Replies
View Related
Aug 20, 2010
I'm having an issue with using my Eris while connected to my home wifi network. The problem is that after I successfully connect to my network, I am unable to browse the internet, access the Market, or use any music apps which require internet access. I have verified that my phone is capable of doing all of this while connected to an unsecured wifi network, however, my network is secured. I'm not sure if that's what the issue is.A little bit of info about my home network - I have a Motorola SBG900 cable modem w/built-in wireless access. I have it setup for b/g network, WPA/PSK, etc. The strange thing about this is that I have two laptops, & my iPad setup on the same wireless network and all of them are able to access the network with no issues.
View 5 Replies
View Related
Nov 22, 2010
I can't keep my wifi connected on my Droidx. Scanning connecting connected then a few seconds later the wifi icon disappears and it repeats the process seemingly forever. I've discovered that if I use the wps push button method to connect it was stay connected until the wifi goes to sleep when I tries to reconnect I get the scanning connecting connected loop. I've tried different settings in my router (wpa/wpa2 just wpa, just wpa2, tkip, aes) I refuse to go below wpa encryption. My current settings WPA2 AES. I'm running a Linksys WRT400N dual-band router latest firmware, 2.4ghz mode set to mixed b,g,n. Oddly enough, during the time it took my to write this it connected itself and it seems stable now (at least until I let it idle). Phone probably knew I was on here complaining about it but any help you can give me to obtain a wifi connection better without having to spend 15mins each time trying to get it to connect would be great.
View 14 Replies
View Related
Sep 24, 2010
I have a problem with a brand new Galaxy i9000 and the wifi. I have managed to add one wifi network to it that I use at home. I have a second wifi network that I want to add, called cat, but when I try to add it from the Add wifi network place, it gives the error: Unable to save the network. i have tried a power on and off. Is there a maximum number of wireless networks one can save, or is there a problem with my actual 'phone? The phone is very laggy as well, and almost impossible to use when 3G is active. (Load averages are as high as 30 sometimes).
View 1 Replies
View Related
Mar 9, 2010
Phone: Rooted Samsung Moment.So I'm literally 6 feet away through one wall from a WiFi hotspot where I work. The campus is set up so that there is an unprotected WiFi access that is used for downloading configuration software. The other signal is protected and can be accessed using a common login. The configuration software is not needed if you know how to setup WiFi.
Here's the problem: the unprotected signal is the only one that the Moment will acknowledge, which is useless because it doesn't provide any internet access. The protected signal does not show up.Except when I use WiFi Analyzer when I can see both signals (which bounce around between 45 dBm and 60 dBm). I've tried to add the internet WiFi signal manually (WPA2) which is supposed to be a trick that works, but that's a no-go.Why can I see the signal on WiFi Analyzer, it be the same signal strength as the other signal, yet I can't see nor add it in the Android WiFi Settings? It's bugging the hell out of me.
View 1 Replies
View Related
Sep 23, 2010
When my router is set to WPA the Droidx connects and stays connected. But when I change to WPA2 it keeps connecting and disconnecting every few seconds. This leaves me with a choice of less security for my entire network, or no wifi for the Droidx. I have seen this problem mentioned on the Motorola support page, but I have not heard of any resolution. Does anyone have a fix for this? I am using the new Froyo 2.2 OTA update.
View 14 Replies
View Related
Sep 29, 2010
I got myself a Samsung Galaxy S. And decided to sell my Milestone to a guy. So when he is testing out the phone the WiFi doesn't scan his office WiFi. It scan every WiFi around us except the office WiFi. I use my Milestone's WiFi all the time. And all the time it scan and detect all the WiFi. Infact 30 mins before the sale I was using the Milestone's WiFi at school to find a map to his place.
Weird thing is when I use my Galaxy S to scan WiFi, it scanned all the WiFi and his office's WiFi too. So does anyone know why my Milestone is able to scan everyone else WiFi except his office's WiFi? It couldn't be hidden because my Galaxy S was about to scan his WiFi. This is extremely bad luck, because I know my Milestone is in perfect working condition and now he would think I'm scamming him.
View 4 Replies
View Related
May 1, 2010
My N1 will not reconnect to a mobile network if it has been sitting for a few hours in a no-coverage area, such as a building. I cannot get it to reconnect, even after refreshing the network search in settings>wireless and networks>mobile networks. This action only leaves me with no result or a message saying that there was an error in searching or connecting to mobile networks. The only solution is to restart the phone. Every time I try to turn the phone off after this error has occurred, the shutdown sequence hangs until either I become frustrated and do a battery pull, or it automatically restarts itself.
Furthermore, the phone used to give me an error notification saying that the phone does not have carrier service. Now, it does not. I tried uninstalling all my programs and nothing has worked for me. I'm considering putting on the cyanogen ROM to see if it would fix this error, but I am hesitant to void my warranty. It's a pretty serious problem as I'm very frequently in a building where I don't get service. It's quite frustrating to have to wait to reconnect to a mobile network once I leave the building and hope that the error didn't occur or have to do a battery pull every time I realize that the phone simply won't reconnect.
View 7 Replies
View Related
Jul 3, 2009
I just got the HTC magic last week and have been trying to fix it with tmobile help but they haven't helped. I go then unlocked version of the HTC magic on amazon. Everything on the phone works and I can call and text no problem but I cant get Data. I have the data plan for the phone but I cant get it to work.
View 4 Replies
View Related
Mar 29, 2010
is there a way to log on a WPA2 Enterprise Network? My school uses this, and I can't connect.I bought my Galaxy without a data plan because I thought I could be able to connect at school and at home, but it doesn't work with WPA2 Enterprise.I heard of an app, Wifi Helper I believe, but you need to have your phone rooted, something which I don't really want to do for various reasons.
View 10 Replies
View Related
Sep 14, 2012
There is 3G into Android tablet.If device (Android tablet) looses network connection, it's just impossible to connect network until resetting of the device (Android tablet). What can be changed or adjusted in /system to fix it?
Specifications Android tablet:
Allwinner A10
Built-in 3G
7"
View 1 Replies
View Related
Sep 30, 2010
I am attempting to connect my laptop to the Epic Hotspot. My laptop is able to find SPH-D70002E (Epic) on my laptop's WiFi available network list. When I click on that, I get a Window's error message: "Windows is unable to connect to the selected network. The network may no longer be in range. Please refers the list of available networks and try to connect again." The SPH-D70002E (Epic) is full bars strength.
View 7 Replies
View Related
Jul 5, 2010
I just bought this phone and it when I go through the process of making a motoblur account I complete everything and it says error creating account the phone radio is unable to connect to the network. Make sure the radio is on or if it is on, move into better coverage area and try again
- I have full 5 bars
- I have no 3G Plan
- I am on rogers (recognizes and connects)
- Its unlocked and I bought it on ebay
View 2 Replies
View Related
Mar 29, 2014
I have recently updated to KitKat 4.4.2. Now my phone isnt able to connect to my mobile data network. Internet access is only possible on WiFi now.
View 3 Replies
View Related
Oct 12, 2010
So, I will try to be as detailed as possible, but this may be outside the scope of this forum. I will respond to any direct questions in regards to my configuration.I have a brand new Motorola Droid 2 and a Cisco 851w wireless router which I have configured myself.I can successfully associate the droid 2 to my wireless network. It obtains an IP address, subnet mask, gateway, etc.Using an android market ping utility, however I cannot ping externally or even to my gateway.I've tried the following in the process of my troubleshooting:tatically assigning my droid's internal addresses (and explicitly naming DNS).Unhiding my SSID Provisioning an alternate completely unsecured, unhidden wireless SSID (as opposed to an original hidden SSID, WPA2/PSK configuration)Restarting the phone and routerLaptop devices are able and have been able to associate, and pass traffic without issue for over a year.I cannot really pinpoint an issue with this setup, as I am able to associate and browse consumer/business wireless networks elsewhere without issue. Searches for the above described issue yield the same suggestions I have attempted in the process of my troubleshooting.
View 15 Replies
View Related
Sep 6, 2010
my husband currently has the Epic. Picked it up for him launch day and sent it out to Iraq the next day. He received it today.He had an Evo before the epic and never had this issue. the issue he's having is, obviously he doesn't pick up sprint service out in iraq, but with his evo he was able to pick up wifi and connect to google talk, qik, etc.his epic is allowing him to connect to a wifi signal, but it won't allow him to connect to google talk, qik, etc. it keeps saying "can't connect to server". like i said, he never had this issue with the evo.
View 2 Replies
View Related
