Ive been given a usb 12 volt charger to use with my desire which works whereas the official 1 doesnt (due to my car being french), question is on the official 1 it says input is 10 - 30 v 0.8A output 5v 1A and the 1 ive been given has input at 12 ~ 24 vdc output 5v dc 1A. would the 1 i have been given charge the phone ok
View 2 Replies
Any ideas what the voltage a charger needs to be to recharge the HTC desire's battery?
View 8 Replies View RelatedI forgot to bring my Droid Incredible charger with me to work. Since the battery was getting low I decided to use my BlackBerry Storm charger on it. The ports are the same, and it goes in without any problems. However, after doing this, it became difficult to unlock. Swiping down usually didn't work. If I was able to swipe down I couldn't get past the "password puzzle." I thought the phone was locked up so I pulled the battery, but it still wouldn't swipe after coming back up. I took the charger out and realized I could swipe again. I repeated this, again plugging the charger in and again I was unable to swipe to unlock. Is there a voltage difference between the BB charger and the Incredible charger? It seems like it was charging it fine. JuicePlotter shows a charge while it was plugged in.
View 2 Replies View RelatedPossibly a simple answer to this question -- can the USB charger that ships with the Droid X be used with 220 volts in addition to 110 volts? I am planning to take my Droid X to India and need to figure out if I should plug the charger into a 110/220V travel converter, or if the USB charger is already dual voltage and I'll only need a plug point adapter. The voltage specified on the charger has 240V as the upper range, which leads me to think it should work with 220V.
View 4 Replies View RelatedAmazon.com: Genuine Motorola Droid P323 Battery Charger System: Electronics Amazon.com: Motorola BP6X A855 Droid OEM 1300mah Standard Battery: Cell Phones & Service Anyone use these 2 items from Amazon? I'd like to get a second battery and an external charger, this seems like a cheap solution while keeping OEM parts. The only thing I'm really questioning is the voltage output of the external charger to the battery. Any way to tell if it will charger correctly? If you know the answer, please provide reasoning.
View 8 Replies View RelatedAs usual, these are update.zip format. Rename to update.zip, place on root of sdcard, and install (don't forget to 'allow').
My advice to you, in selecting a kernel, is to #1 try the lowV varieties first. Then select the slowest kernel that exceeds what you expect to run on a day to day basis. So if you plan on running 800-1000, run the 1.0lv kernel.
If for some reason you get stuck on the 'M' while booting, first try switching to the mediumV kernel. If that does not work, back the speed down, say from 1.25 to 1.2, or 1.2, to 1.1, etc.
5-slot Low Voltage
1.0Ghz (125/250/550/800/1000)
1.1Ghz (125/250/550/800/1100)
1.2Ghz (125/250/550/800/1200)
1.25Ghz (125/250/550/800/1250)
5-slot Medium Voltage
1.0Ghz (125/250/550/800/1000)
1.1Ghz (125/250/550/800/1100)
1.2Ghz (125/250/550/800/1200)
1.25Ghz (125/250/550/800/1250)
7-slot Low Voltage
1.0Ghz (125/250/550/700/800/900/1000)
1.1Ghz (125/250/550/800/900/1000/1100)
1.2Ghz (125/250/550/800/1000/1100/1200)
1.25Ghz (125/250/550/800/1000/1100/1250)
7-slot Medium Voltage
1.0Ghz (125/250/550/700/800/900/1000)
1.1Ghz (125/250/550/800/900/1000/1100)
1.2Ghz (125/250/550/800/1000/1100/1200)
1.25Ghz (125/250/550/800/1000/1100/1250)
What does mah actually mean for a battery ? I have a stock 1500 and an after market one rated at.2650 (allegedly !) The max voltage for each is c.4172mv. How does the mah come into play ?
View 3 Replies View RelatedMy stereo system (Phillips MCM530 Micro System) has RCA audio inputs. I want to be able to play music from my G1 through the stereo. I'm wondering if either of these is what I should be using.
USB Virtual 5.1 Channel Sound Adapter with MIC Input USBG-SV5 LOW PRICE $19.98
USB 2.0 AUDIO Input/Output Sound Card for XP and Vista USBG-X2X LOW PRICE $17.88
USB Input/Output with LINE-IN Sound Card for Windows USBG-X4S LOW PRICE $28.88
I am developing a simple app that sets wallpapers based on some user inputs' I am almost done with my app, I am only missing the code for setting wallpapers. I have been looking for it in lots of websites in vain. Can anybody post a sample code that sets as a wallpaper a drawable that is saved in res folder.
View 2 Replies View RelatedI have a small test app on Android that is meant to test tracking multitouch input, but I am only ever getting two touches at the same time on my Evo. Does anyone know if this is a limitation to Android or the hardware? By the way, here's my test class so you can try it out yourself.
import java.util.HashMap; import android.content.Context;
import android.graphics.Canvas; import android.graphics.Color;
import android.graphics.Paint; import android.graphics.Paint.Style;
import android.view.MotionEvent; import android.view.View;
public class PressureView extends View {
private HashMap<Integer, Spot> mSpots = new HashMap<Integer, Spot>();
private final int[] mColors; private final Paint mPaint;
public PressureView(Context context) { super(context);
mPaint = new Paint(); mPaint.setStyle(Style.FILL);
mColors = new int[]{Color.RED, Color.GREEN, Color.BLUE, Color.YELLOW, Color.MAGENTA};
} @Override protected void onDraw(Canvas canvas) { super.onDraw(canvas);
canvas.drawColor(Color.WHITE); for(int id : mSpots.keySet()) {
Spot spot = mSpots.get(id); mPaint.setColor(spot.Color);
canvas.drawCircle(spot.X, spot.Y, spot.Pressure*500, mPaint);
} } @Override public boolean onTouchEvent(MotionEvent event) {
System.out.println("***" + event.getPointerCount() + " Pointers");
for(int i = 0; i < event.getPointerCount(); i++) { int id = event.getPointerId(i);
Spot spot = null; if(mSpots.containsKey(id)) { spot = mSpots.get(id);
} else { spot = new Spot(); spot.Color = mColors[mSpots.size()]; }
if(event.getAction() == MotionEvent.ACTION_UP) spot.Pressure = 0;
else spot.Pressure = event.getPressure(id);
spot.X = event.getX(id); spot.Y = event.getY(id);
mSpots.put(id, spot); } invalidate(); return true;
} private class Spot { public float X, Y, Pressure; public int Color; } }
I have a TextWatcher set on an EditText that changes the input type after a user types a number followed by a space. If the user types two numbers the input type switches and accepts the next character, but if the user types only one number and presses space the input type still changes but it won't accept the first character the user tries to input. I've tested this on Froyo and 1.6, it only happens on Froyo, 1.6 works like it should.
Here's the code:................
Can anyone recommend a good car charger?
View 1 Replies View RelatedJust found my tomtom mains / usb charger that I bought in NZ.. Comes with US, UK, AUS/NZ & Euro plugs and cost me ?15.00. Spec is: output 5v - 1.0A I presume this should work as it's the same out out as the HTC. You would need a USB / Micro SB cable. Would this work OK on the Desire? I hate to damage my new 'toy'
View 3 Replies View RelatedI have a Kensington PowerBolt Micro Car Charger that supplies 2.1 Amps for iPad and it also works with iPod OK (the iPod draws less amps I assume). I need a charger in the car to supply enough power to use with HTC Desire with Google Navigator. Would it be safe to use with my HTC Desire in the car if I changed the USB-iPod lead for the USB-microUSB lead. Will the Desire only take as many amps as it wants or will I fry it!
View 1 Replies View RelatedI have been using my phone for about 4 months now and I knew it was going to happen as it is so poorly built, the charger port has broken!
View 3 Replies View RelatedI have recently bought a spare charger off e-bay, it isn't a htc branded one but just a cheapo Micro USB charger. When I plug this one in, I get an icon for car mode in the top left hand. I don't get this on any other charger I use (USB, Mains or car). What does this mean and how can you change your settings for this mode and why doesn't it show on the other chargers.
View 4 Replies View RelatedFound this on my travels - anyone tried it ?
Brodit Active Holder, Tilt Swivel, car charger for HTC Desire 512141 Cradle Mount, Desire
I need to get a couple of things for my desire to make my life a little easier and wondered if you kind people would point me in the right direction. I need to get (as cheap as poss) A spare charger for work And A spare battery. I'm not sure where to look and what to go for without electrocuting myself or as tempting as it sounds burning my works building down.
View 4 Replies View RelatedI know there are a few on the market but most aren't made to accommodate my FlexiShield or other cases for that matter.
View 2 Replies View RelatedWhat car charger can i order that charges as fast as the wall charger, can someone provide a link?
View 17 Replies View RelatedDirection of a cheap wall charger for my desire. I've been reading about fakes and different power outputs and ive no idea what to go for.
View 1 Replies View RelatedI've had my Desire a few weeks now and am resigned to the fact that I have to charge it regularly as I have it linked to my office Exchange server using push email. As I am on call for my job I need it on overnight as well. I always plug it into the HTC charger at bed time, but this morning I noticed something odd. When I woke up (still plugged in) the battery was showing 100%. As soon as I unplugged the charger, it dropped to 90%. I've seen a similar question on the forums but the circumstances were slightly different - anyone have any thoughts, duff battery maybe?
View 8 Replies View RelatedWill virtually any mini-USB based cable, car charger, and wall charger work with my HTC Droid Eris? Mini-USB cables are generally universal, but I want to ensure that I use a compatible car charger and wall charger that won't damage my phone. The official Verizon accessories of course seem overpriced, if any generic solution would work equally well.
For example, I am considering this product on amazon.com: Amazon.com: Home Travel Wall Charger + Rapid Cell Phone Car Charger + USB Data Sync Charge Cable for HTC Touch Pro 2 / Tilt 2 / Hero / Imagio / Pure / Touch Diamond 2 / Droid Eris: Cell Phones & Service. Overall, this mini-USB cable / car charger / wall charger combo gets positive reviews, but I've heard of random glitches for some cheap chargers.
Anyone tried one of these and purchased from this site before? HTC Desire Battery Extender Charger, HTC Desire Or anyone have any similar products they've brought used and recommend?
View 5 Replies View RelatedCan i use my ipod charger plug, with one of my many spare usb-mini usb cables i have for many gadgets (ie cameras/camcorders), to charge my desire? or is the ipod plug rated to push through a different numbers of amps/volts/currants/electrons/whatever to my desire, ultimately killing it? this will save me and probably a lot of other folk a few quids in buying spare chargers etc, as i am sure we've all got a spare mini-usb cable and an ipod lying around. i am talking about this part, or one of these for car charging.
View 5 Replies View RelatedIt stopped charging, seemed like it was the charger connector, no problem they say, its covered under warranty, so i sent it off, then they email me, 53 quid please, you broke it, well i didnt, im CAREFUL BUT WHAT CAN YOU DO. 3 weeks pass, where is it? several calls result in various responses. after 4 weeks, it comes back, still not working, turns out its the charger. how did they not eliminate that? perhaps i should have noticed but i put my faith in their support and they took fifty quid fot the pleasure. poor
View 3 Replies View RelatedJust got a new Desire (ordered it ages ago but had to wait for the delivery with Super LCD) and sometimes, but not every time, I see that the battery drops anywhere between 7-9 percent moments after disconnecting the charger.
I'm curious whether anyone else has had this. Is this a calibration thing, or a problem with the phone, or the battery? Or an app? I'm using both Battery Indicator and JuicePlotter and they both show the same thing, the same drop. Curiously JuicePlotter tells me the drop sometimes occurs once or twice while charging in the night, too.
I'm a bit loathe to send it back to the shop after waiting well over 6 weeks for the thing in the first place, so I thought I'd check here first. I'm hoping it's just teething issues and will balance out in a few days. I got the phone about 4 days ago.
can I use the same car charger I use on My Droid when I get the X?
View 29 Replies View RelatedI am using the OEM charger on my Dinc and nothing else. I randomly get a message something like, "The charger you are using is not compatible with your device. Remove the charger now to avoid damage to your phone". I have not used anything other than the OEM charger ever. It isn't loose or frayed or bent strangely. It also seems to charge even though the message pops up. For now, I'm using my computer's USB port to charge it but man, that's SLOOOOOOOOW. It has done it since I first got the phone and before I had even installed my first app. It also does it after a factory reset and reprogram. Customer service is sending an aftermarket wall charger free of charge until I can get an OEM unit as they are obviously out of stock.
View 1 Replies View RelatedIs their any app or a way to underclock the voltage I c that when my battery level drop to about 60% my voltage level lowers an my phone last longer compare to when the battery was full completely.
View 1 Replies View Related