I have a no name i7 tablet. M799ca 2.3.3 rooted (superoneclick). I've been trying to put clockworkmod recovery on it with no success due to noT knowing the exact model of my tablet. I need to know how to put some kind of recovery on this so I can flash a new kernel on it. The one I have won't let me over clock the processor.
View 1 Replies
i have a Boxchip A13 generic tablet but i can't find any way to root it.
i've searched and found a guide to root all allwinner A13 generic SoC [URL] .... but on my device although USB debugging is selected and my ADB detects my LG Optimus 4x, no device is detected when i connects my Generic A13 tab.
Interestingly i can't seems to find anyway to enter stock recovery either. On my device there's a orientation slider (autorotate/portrait), power, Vol +/-, home key).
My device doesn't come with driver CD nor proper OEM driver on the web.
are there gonna be anyway to root my tablet?
I recently bought one of the HD-89 7 inch tablets that are available now. Nice thing is they also have a phone function.
They are MT6589 devices based on MTK8389 hardware. I was wondering if there is already a CWM Recovery available for these devices. Rooting was no problem.
I have a tablet with a MID7048 hardware but software has a MID in 8048 .. and that's ok for me, but my problem is that I have a lot of time looking for a cwm recovery for this tablet, looking for some .img file? 4.04 which is actually the rom happened to me a friend, but I realized that was Vampirefo,)
View 4 Replies View RelatedI have chinese tablet, probably it's a any product of MID, becouse on start appear MID logo, perhaps it's only firmware from MID devices. At the back I can see m70008 maybe it's version of tablet. That tablet was blocked by too much write bad pattern and don't know google e-mail. So I tried do wipe data via adb, and probably I do wipe all . Tablet stuck on bootscreen, and system don't start. If I try run shell via adb I get error "- exec '/system/bin/sh' failed: No such file or directory (2) -"what I have to do ?.
View 1 Replies View RelatedI have this tablet Microlab Spektru 1.2 Ghz RK2918 , 512 Mb DDR3 Ram. Not sure if it had 4.0. Actually it's not my tablet, my grandpa' bought it, anyway he noticed that the Wifi signal was very bad and someone told him that he could use a micro-sd for updating.
So he turned off, put the SD and "installed" android again. after this android started normally but the Touchscreen not working.
Also I found some firmwares, but i Still can't get into recovery mode, the tablet doesn't have a Home button. Just Up, Down Volume and Power.
I have a request for a CWM recovery for my device. And a guide on how to install. ... Last time I tried, no one replied.
Super rare, old Scroll Excel running Android 2.3 using the offical app.
I have a Dreambook W7 and it looks like I've killed it.
That's what happened: I've tried to flash a new recovery, but did it in a wrong way, so now I can't turn the device on. In both variants (usual boot with "Power" button or boot in recovery mode) I just get an Android logo and nothing more.
Is it possible to somehow repair my tablet?
What was actually done wrong - I've used 'dd' command with 'of' set to "/dev/block/mmcblk0" with a wrong 'if' file.
I just purchased a cheap 9.7" Android Tablet, Model AM09-D2. It came with ICS 4.0.4, has 16Gb ram and a dual core Cortex A9 CPU. I would like to know how I go about backing this thing up. It is rooted and has absolutely no blootwear installed. Is it possible to flash a custom recovery. Like TWRP or CWM to save a image of the rom. I have already did a data and app backup with Mybackup Pro. Now I would like to backup the Rom and maybe do dump. Is it possible and if so how? Not really that comfortable with ADB/fastboot, truthfully I don't understand what the difference is. I already have drivers setup for Samsung Galaxy Nexus on my Win 8 notebook. Will installing ADB/fastboot screw things up?
View 1 Replies View RelatedMy brother has an eken T02a tablet and recently i installed root explorer on it and my brother was playing with it and deleted /system and now it is not booting crying: there is a bootsplash screen but no boot loader and i dont know how to access recovery on this tablet.
View 6 Replies View RelatedI rooted my galaxy tab 2 7.0 yesterday and flashed cm10.1. Everything was working great until I tried changing my boot animation. When I tried rebooting it rebooted but there was no boot animation and then once it rebooted half of the screen displayed black(it isn't broken because the backlight is on and it works fine when it is in recovery) I boote into recovery and tried restoring it from a backup I made of the stock rom but it keeps saying E: signature verification failed.
View 1 Replies View RelatedI have a Chinese 7 inch Tablet named Luv Pad AD701 based on Allwinner A10 processor. I installed "CWM 6.0.1.2_a10" and then rebooted to recovery mode. Now I am stuck in the loop of CWM Recovery mode. The tablet only opens recovery mode and desn't boot normally. I triesd to flash a new ROM but it says
E: failed to find "cache" partition to mount at /cache
E: Can't mount /cache/recovery/command
Warning: No file_context
E: failed to find "cache" partition to mount at /cache
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: failed to find "cache" partition to mount at /cache
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
E: failed to find "cache" partition to mount at /cache
This tablet doesn't have volume up or down button.It only has power, back and option button.
My Quest tablet is accidentally locked yesterday it asking for gmail and password but i forgot the gmail id and password.So after a long search i found lots of things such as unlocking tablet pattern lock,gmail lock,pin lock etc.These topics only be successfull only when the tablet is in recovery mode.So i tried to put my tablet into recovery mode by pressing vol + and power button.But there appears a android bot lying with red traiangle exlamation.So i simply tried to access recovery menu by pressing power and the vol + .But nothing happens neither than a dead android bot lying down with a red traiangle.
View 6 Replies View RelatedI reckon that I have deleted all the data from partitions such as boot, system, cache, etc all of them. Hence, the Nook tablet isn't starting into any mode except the recovery mode of ClockWorkMod. How to restore the boot entries of a Nook 16GB tablet?
View 3 Replies View RelatedMy friend have a ChiliGreen tablet, yesterday he reboot it after stop all application who were running on it and after the reboot the tablet goes automaticaly in recevery mode and now every time he reboot it goes to recovery mode i make a factory reset but nothing always recovery mode.
View 2 Replies View RelatedI cannot access the recovery mode of Ainol Novo 8 Advanced MINI Tablet. I tried holding power + vol+ button but its not working,
View 2 Replies View RelatedI have a Nexus 7 tablet and every few days I notice a few new apps on the device. I'm not sure if they're full apps or just simply icons to download apps or get more information. I have tried to avoid using them. I know previously I had a couple apps that were sending notifications to the notification system that I considered to be spam. After some research I found out how you can find out which apps are doing it and disable notifications from those apps so that took care of that.
View 4 Replies View Relatedi have a chinese tablet (Teclast P98HD A2Q6) with some very good specs it has 4.1.1 but it's laggy there's another tablet called (PIPO M6) with the same processor and display & it has 4.2.2 with the latest SDK for the chip.can i upgrade my tablet with PIPO's firmware ?
View 9 Replies View RelatedI've managed to create a TOUCH Recovery Carliv v2.2 based on CWM V 6.0.4.4 recovery for the Zen Ultrafone 701HD.....
Link for the TOUCH Recovery Carliv v2.2 based on CWM V 6.0.4.4 recovery for the Zen Ultrafone 701HD.....
[URL]
Mirror :
[URL]
Easiest method to have this recovery for a rooted phone is below.
1.Install mobile uncle tools from Play Store.
2. Place the recovery.img provided in root of SD card.( Rename the recovery file as simply RECOVERY.IMG)
3. open mobile uncle tools and flash the recovery.
The other ways may be followed from this link of Dextrorototrix
[URL]
Full credit for this Recovery goes to Yuweng who created the auto tool CWM Magic Create [URL] found in this link [URL], and Carliv who created the recovery that made it so easy to port to new devices, Napster who shared his touch source with Carliv, and of course the original creator of CWM - Kouch. It took many hours of hard work to get us to where we are today.
is there anyway to compile cwm on windows i have cygwin installed
View 4 Replies View RelatedSo awhile back my tablet was acting up and being slow. So I held down the power button to reboot it but when I try starting it back up again it goes through the normal process up until a black screen with the word android that is in blue and is flashing. It always stops here. Also whenever I plug it into my computer it just says that there is no driver found I have a MID M9000 9" Android 4.0 Capacitive Touch Tablet PC - 1.2Ghz, 8GB, 512MB, Wi-Fi (White) The picture is where the screen is stuck
View 3 Replies View RelatedIt does not load past the android screen despite being plugged in for several hours. I have held the power button down, tried resetting it and pressing various other combinations of buttons at the same time. I put an SD card in it.
Android OS 2.2
Kernel 2.6.32
Build Number V1.5.2
I'm having an issue with my tablet, an Onda VI40 Ultimate. It was left off for a day or two, and when I plugged it in yesterday I got the battery screen, but it was in orange and showing that it needed to be charged. I figured I'd leave it alone for a few hours, then come back to it.
I left it plugged in for four hours, but when I came back to it the tablet is just giving the same message. I took out the charger, plugged it in again and got the same screen. I plugged it into my desktop pc via usb cable, and it just gives the same screen over and over. I got another charger, one exactly like it, and plugged it in. Same screen again. I pressed the reset button, same screen. I tried holding down the power button and volume up button, but no deal. I have the latest CM9 build installed on it, with ICS 4.0.4.
I have included below a terribly blurry photograph of what I'm seeing when I try to turn it on, or do anything with it. The tablet just never seems to charge no matter what I do, nor will it boot in any way.
Thinking about getting the moms a tablet for Christmas. Loving the reviews of the Asus Transformer but my original plan was getting her a 4G device so that she can use it even when wifi isn't available. Just wanted thoughts and opinions from those who have had experiences on either end and any recommendations.
View 5 Replies View RelatedI've seen a video in youtube that a person installed win 8 on his a13 tab ..... Is this possible ? if yes , how ?
View 1 Replies View Relatedselling right now tablet and return to factory state works not. still remain files in memory.
while tablets havent numpads?
Does Android 4.1 allow a device to serve as a Hands-Free Profile (HFP) device? Similar to the way many newer cars come with integrated Bluetooth/HFP, I would like to use my tablet (Nexus 7) as a front-end for my phone. When an incoming call comes in, the phone should relay the call over Bluetooth to the tablet; it should also allow the tablet to make outgoing calls via Bluetooth over the phone's network.
I am not interested in solutions such as GrooveIP, Talkatone, and SIPDroid. I am specifically looking for Bluetooth HFP.I wouldn't mind looking into developing such a product - but I first wanted to know if the HSP 1.6 host API was available in Android 4.1. I've seen resources stating it was available in ICS 4.0, but I believe this is to allow Android devices to connect to third-party HSP devices - I'm looking to do the opposite (i.e. have the Android device serve as the HSP host).
I bought a tablet without a name. I would like to install CWM to make a backup of the rom. How do I do? Rom Manager says: device not listed above The tablet is already Root
Phone model: TAB950
Brand: DJIX
Hardware CPU: sun5i
CPU model: ARMv7 Processor (VFPv3, NEON)
CPU frequency: 30 ~ 1200MHz
Screen resolution 800x432
Screen density 160dpi
Render GPU: Mali-400MP
Android version: 4.04
Kernel: Linux version 3.0.8 +
find a compatible rom for my tablet. I would like to upgrade honey comb to ics or jelly bean. I don't want to just download any version of rom. Where can I download the rom.
Here are the specs Description
nVidia Tegra 2 1Ghz
1GB DDR2 RAM
16GB Flash Storage
10.1" (1280 x 800) Capacitive Multi Touch LCD
mini SD Card Reader
5.0 Mega Pixel Webcam
Wifi
BT
G-Sensor
HD Audio
Microphone
3G 7.2 MBPS
Micro HDMI out
Micro USB 2.0
Battery life : Up to 8 Hours
Andriod 3.2 (HoneyComb)
how to root HCL ME Y2 tablet?
View 9 Replies View Related