General :: Huawei Y210d Firmware Flashing Failed?
Feb 24, 2014
I have an Huawei Ascend y210d on which I installed CWM recovery. After that I installed a custom ROM, but now I want to flash its official firmware.But its official firmware is not installing. It got told using Huawei firmware Indian version downloaded from Huawei. I am using this procedure:
(1)First copy dload (in dload folder update.app file is present) folder to the root of the SDcard
(2)Then turn off your device pick out battery then again insert battery
(3)Then press buttons volumeup+volumedown+powerbutton
(4)Then its start unpacking the update package But in step 2 it failed on installing.
This is the error.log I get in SD Card :
{filename = /mmc1/dload/update.app
call RCV_MODULE_END_EVENT failed,module = OEMSBL_VER_LIST
CMD=0xf,moduleaddr = 0xf0000000, len_tmp=0x2c54
filename = /mmc1/dload/update.app}
What can I do to get this fixed?
View 2 Replies
Dec 3, 2013
I have a huawei ascend y210d, model y201-0200 i need a rom for it, i tried the VIETTEL rom but is not working on my phone. I installed recovery on it and i flashed VIETTEL rom but this rom is crashing, is not working ...
View 2 Replies
View Related
Jan 26, 2013
i have a serious problem with my huawei u8950-1 g600.i tried several way to unlock bootloader and finally i find a file and transfer it to my sd and update my devise by hold volume up/down and power.after this i have my phone rooted and recovery installed but the major problem, Bluetooth is not working anymore and in about phone section in status Bluetooth address is unavailable.
View 9 Replies
View Related
Jun 7, 2013
I cant seem to find firmware v151 for my huawei Y300. I tried google but all I can find is v0100.
I just had the phone and ignorantly replaced its firmware from 0151 to 0100. The problem is my 3G signal dropped significantly and camera quality became very bad.
View 9 Replies
View Related
Mar 6, 2012
Can't install my custom firmware for my huawei u8650. Once i have yesterday installed custom rom my batery was discharged so now then i press vol+,vol- and turn on butons at once and then it stucks! here the update text file from sd card:
filename = a:dloadupdate.app
Failure: CRCMD5_RSAŠ£
Failure: operation did not succeed.
Failure: operation did not succeed.
[code]....
View 2 Replies
View Related
Jun 1, 2013
I just got the U9200 on Tuesday unlocked through Amazon for $290! Rooted it yesterday using a guide on xda. But when I went looking around for other firmware I noticed that my version wasn't in any list. Google search turned up one Chinese forum thread that just says the guy rooted his phone. Searching xda brought up nothing relevant.
From the About phone page:
Android version
4.0.3
Kernel version
3.0.8-00017-g636043d
android@localhost #1
Build number
U9200-1V100R001USAC00B003
Custom version
CUSTC02D003
View 6 Replies
View Related
Oct 21, 2012
i have try many method from other website but still not working...
View 2 Replies
View Related
Apr 16, 2012
I have new firmware on PC for my Samsung phone, intended for flashing with Odin (i have PHONE, CSC and PIT files). My question here is, is it possible to root this firmware before flashing it. The case is, my phone is now rooted and I don't want to loose root access, but I would like to flash this new firmware, cause with this one i have occasional problems (force close of apps, freezes, loosing wifi connection, etc). I've searched every where but haven't found anything. Only Mobile Odin have such options, but my phone is not supported yet.
View 1 Replies
View Related
Mar 17, 2013
my SE Xperia Pro .I was flashing it to CM10 , flashed the core but that was the last thing done successfully. Clock work Mod recovery didn't launch , so firmware even didn't started to install. Now by switching it on I just get nice picture "xperia free project" and depressing dark after it. I cant launch recovery, SEUS at the first time stopped working very quickly, the second time said that there is modified software there, and thirdly ,at last, didn't recognize my phone at all. Can i do something with it, excepting using it like a brick?
View 1 Replies
View Related
Apr 20, 2013
My phone wont boot up its a samsung exhibit 4g and it running gingerbread 2.3.3 it says firmware upgrade failed tried everything only post if you have a link or know what your doing im now stuck on blackberry with out my presious bikerace game.
View 6 Replies
View Related
Apr 11, 2013
My cute galaxy ace was dead after flashing the wrong firmware by accedent (galaxy 551 firmware) now i'm not able to enter the download mode when i try to boot it on it just turns on the two virtual buttons, any way to flash to flash without entering to download mode or using another program ??
View 2 Replies
View Related
Sep 3, 2012
i was trying to unbrick my old cliq by flashing the original firmware and it failed idk why and it wont dectect it any more and the phone has a black screen and only the keys light up any way to save my old cliq??
View 2 Replies
View Related
Sep 15, 2012
is it possible to unlock samsung galaxy s plus (i9001) by installing any of the moded firmwares/kernels?
View 1 Replies
View Related
Nov 27, 2013
How to unbrick my one s. I can get into recovery but i cant do anything else. I have tried flashing multiple boot images from the bootloader but i get the same failed message every time i try to flash a rom. I dont have s off but i am rooted and supercid.
View 1 Replies
View Related
Jul 3, 2012
I have flashed my x10a with flashtool and x10_2.3_aro_2.ftf firmware. But after the flashing is finished, my phone screen touch is not working. What can I do now? I am unable to install xrecovery to install another rom bcoz screen touch isn't working. So I can't install any custom ROM.
View 2 Replies
View Related
Sep 1, 2013
i'm using lg l3 e400 ! actually my went in boot loop ,so it ws unable to start then i flashed kdz V10L(as i'm from india ). then my phone sarted normally!but the main problem is that now i tired to root my phone so many times but always and error comes link failed permission denied !!so i think that after flashing orginal kdz flash (stock rom )kdz V10L we are unable to root !!
View 5 Replies
View Related
Jun 9, 2013
I am on twrp recovery version 2.1.3 and to upgrade to 2.5.0.0 I used the Google .im app but even after the message showing that recovery was flashed successfully, when I reboot into recovery I still see the 2.1.3 twrp only..So I tried flashing it with terminal emulator but it didn't work.This error shows up every time failed scanning partitions failed with error : - 1
I tried putting the .img file in the root folder as well but it didn't work..I tried naming the root of sd card as storage/emulated/legacy, storage/ emulated / 0, /sdcard, etc but it keeps on giving this error every single time!
View 1 Replies
View Related
Aug 30, 2010
So I've been tinkering around with Odin and flashing to the many firmwares floating around- the latest is the JFM6 i9000 firmware.. Which also included flashing the CSC and kernel..
My question is, since I flashed the csc and kernel, how do I flash back to the stock JF6 rom that came with the phone? Just the pit and .tar (pda)? I have the firmware and the pit file.. just wondering what is entailed because of flashing the additional csc and kernel files as well.
View 9 Replies
View Related
Jul 17, 2010
Every time I try I get a 'boot failed' then 'error at line 390' installation failed, aborted etc. If I try to reboot it just sticks on the HTC incredible screen. I've tried using Rom manager and directly from recovery. Re downloaded files. Maybe related but any kernels I tried stick on the same screen?
View 4 Replies
View Related
Mar 27, 2012
will roms made for the huawei ascend 2, work on the huawei sonic, as the phones look identical, and the specs are pretty much the same?
View 1 Replies
View Related
Oct 13, 2010
I just recently purchased a Samsung Galaxy GT-17500L (its a Bell Canada phone). After purchasing the phone (which was originally unlocked) I bought a Solo mobile sim-card, which was needed in order to use the phone on my Solo monthly plan. Everything was working fine until I decided to try and update the firmware from 1.5 to 1.6; unfortunately, like a few others from Canada, I didn't properly read the guide and after the upgrade, the phone was "re-locked" and wasn't accepting my sim-card. After going through the guide posted on Pg.4 here (Bell Canada users and Brazilian Users - Galaxy 7500L (notice the L)), with the help of Rasta-Man FB posts and others, I was able to get my phone back to the original firmware, but now I'm having reception issues. The phone will at times pick up the Solo Netowork (I'm still using the original solo sim card), but then drop it after 10 minutes and just say there is no service. When I search for networks, it recognizes the Solo one (I'm guessing b/c of the S.C) but it isn't able to connect.
View 3 Replies
View Related
Oct 16, 2010
I am trying to use RSD Lite to SBF to 2.2 OTA but it keeps on giving me the dreaded Failed flashing process. Failed flashing process. (0x7100); phone connected. I am running Windows 7 x64 and have the latest Moto drivers installed (4.7.1) and am running RSD Lite 4.8. I put my phone in bootloader mode and connected my USB. It is showing iup in port 1, but I am also getting a lot of N/A values. Is this normal?
IMEI/ESN/MEID: N / A
Technology: N / A
Software Version: N / A
Flex Version: N / A
Bootloader Version: v0x003001
DRM Version: N / A
I choose the SBF file and click start and it immediately gives me that error message. Very frustrating.
View 2 Replies
View Related
Mar 9, 2010
I've been struggling to get my Nexus One up and running with the Sense UI. I unlocked the bootloader and rooted it (it all worked as far as I can tell) but whenever I try and flash a new ROM onto the phone I get the error E: no signature E: verification failed I have tried many different ROMs from Cyanogen mod and just a standard Nexus One ROM, but I've had no luck in getting this to work. Plus, when I just return to the original state, my WiFi is out of commission and as an AT&T subscriber (I have two lines so it's not the end of the world), I rely heavily on WiFi for my nexus.
View 4 Replies
View Related
Jun 12, 2010
I'm trying to update from Villian 5.3 to 10.2. But keep getting E:corrupt file messages and E:verification failed. I followed the tutorial that's how I was able to do 5.3, but don't matter. How many times I download it 10.2 just keeps coming up with the same message when I try to flash it, usual the file it claims is corrupted is different for different downloads, never had this before with any flashing I've done.
View 4 Replies
View Related
Aug 9, 2010
I'm un-rooting my phone using OMJ's guide in the everything root related guide, and I'm getting a "Failed Flashing Process" error in RSD Lite.
I am running as admin, I have the correct drivers (I recently rooted...), I have the sbf in C: .... yet it fails.
The error says " Failed Flashing Process. Failed Flashing Process. Interface BP: Error flashing subscriber unit. Device API Error: 0xE0030009 Command: ADDR (0xE0231009); phone connected"
I am going to try flashing SPRecovery to see if I can at least get to a working point.
SPRecovery worked. It boots into 2.1 and has SPRecovery as the recovery. I still want to get it to stock, so I am going to try and download the stock sbf again (it doesn't have a checksum so I have no way of knowing if it is good or not...) .... here goes nothing!
View 2 Replies
View Related
May 6, 2010
I just had this problem and I've seen other people having the same issue. I found the solution, at least for me, so I thought I'd share it. I was trying to flash the SPrecovery spf file using RSD Lite, but it would fail immediately. I found someone else on another forum who discovered that the file had to be in the root of his C: drive for this to work. I gave it a shot and it worked with no problems. This seems really strange. I think he was running Vista. I'm running Vista 64-bit. I was already running RSD Lite as administrator, so that alone didn't help. Moving the file to the root of C:
View 49 Replies
View Related
Apr 23, 2010
Alright this may have been asked a few times, or maybe it could not of been asked. I just can't find the thread related to answering this question.
Okay so my question is, can I flash Galaxo 1.6.2 or GAOSP "without" ODIN flashing or updating my firmware to 1.6? and not then what consequences would occur if I don't flash firmware update before GALAXO 1.6.2 flash. My phone firmware version is I7500ZHJA1 and I believe that is the latest firmware for my region which is still Android 1.5.
View 13 Replies
View Related
Oct 3, 2010
Pls advise me the best unofficial firmware update to download. Froyo based.
View 4 Replies
View Related
Dec 8, 2012
I have a problem with my phone. I cant set any ringtone to it. Whether its MP3, or from system ringtones, it always plays "its" own ringtone. I got phone only yesterday and upgraded it from 2.3 to 4.0 (official upgrade) Everything wen fine.
I dont know what do with it, i looked through apps, if something doesnt have to do with it, but i think not. Is there app that sets ringtones?
View 3 Replies
View Related
Dec 23, 2011
I bought the phone Huawei C8650 from the USA, but it seems that it requires a UIM card instead of a SIM card. Is there a way of running the phone with a normal SIM card? I was thinking of installing a different Android version on it, because it is running android 2.3.3.
View 1 Replies
View Related
