How is it I had the kind of mobile Samsung Galaxy S2 GT-I9100G.
I wanted to install ROM through the program odin mobile and knee after installing version fails the device is to comment on the Samsung logo, which is in the type of device and I will open Recovery Mode I could not and I want Open Download Mode opens to I was not recognized on the device.
View 2 Replies
source for a 'stock ROM' for my SGS II GT-I1900G (Chinese version), for Region: Europe and Country: United Kingdom, and based on ICS.
I have been round and round this for 3 weeks now trying to find the right ROM so that my phone will work as if it was a UK phone. Mostly I find myself directed to parts of this web-site which I am them prevented from accessing because I am judged to be technically not competent (which is probably true, but not useful).
how to do the first time root~ and tell me all the step..I'm using Samsung Galaxy SII GT-i9100G
View 1 Replies View RelatedBaseband version - I8552DDAMH1. GT-I8552
How do i install CWM Recovery on my unrooted Galaxy Grand Quattro using Odin v3?
i tired updating my galaxy s2 i9100g with ics (wasnt aware that its not supported) with odin and it showd me fail and now i am unable to switch it on it just shows phon and yellow triangle and computer logo when i connect it ot pc odin recognizes but kies not can sum1?is it bricked ?
this what odin showd when i tried to update
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9100_SEB_I9100XXLPQ_I9100OXXLPD_I9100XXLPQ.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
[code]....
I using the Cyanogenmod 10 with JB . I got a big problem cause every time i turn my phone into standby i loss my connection to internet and also i loss my mobile signal. after unlock my screen i have 2 enter my pin , i can only phone emergency. when i enter my pin, the phone reconnect and i got signal. i tried nearly every update, i flashed stock ROM and re-flashed cm10, nothing better.
View 2 Replies View RelatedI have a question about the files being used to flash my Samsung Galaxy S2 via Odin.
I have already seen this link [URL]...
I am trying to flash the PDA, Phone and CSC back all to normal stock. I have downloaded a firmware and I only have one file with a .dll file. The one file I have is named "I9100BOKK1_I9100TMUKK1_I9100BOKJ1_HOME.tar.md 5" I have extracted the files from here also and it contains boot.bin, cache.img, factoryfs.img, hidden.img, modem.bin, param.lfs, Sbl.bin and zImage.
How with these files and Odin do I flash all three parts. I can't see how to use these files on the above link with instructions for flashing and rooting.
I have the Samsung Galaxy Tab 3, 7" (WIFI-ONLY).
Firstly, let's start by saying that I ended up rooting it after a while because it got boring having the simple, unmodified android.
It seems creativity got the best of me, and I ended up wanting to switch back to my normal android days. The problems started when I looked for the ways to upgrade my device, and it sais my device had been modified (rooted). So then I tried deleting SuperSU, thinking that would unroot, but nope... I then went to my great friend, we all know as Google. I then found the firmware, however didn't notice it said 3G, not just WIFI.... and loaded it onto my tablet following the instructions leading me to use Odin. I now have a Samsung Galaxy Tab 3 WIFI only, with 3G Firmware.
After countless hours, days, and now weeks of trying to get it back to the normal firmware, all my attempts result in an error on Odin, and here's what I get:
First, I just load the .md5 file, and this happens.
---
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T210XXAMK5_T210OLBAMK1_T210XXAMK5_HOME.tar.md5 is valid.
[Code] ....
Now, what do I do to get my precious tablet back to normal? , since I have the 3G version, I'm required to have a sim card which I can't put in because there's no sim card slot (it's a WIFI tab). I can't even use WiFi, because it won't turn on without a SimCard.
how to root GT-I9100G with below spec.
PDA: I9100GDZKL3
PHONE: I9100GDZKL3
CSC: I9100GOLCKL3
Build Info: Thu Dec 22 14:58:59 KST 2011
Model: GT-I9100G
Android: 2.3.6
Baseband version: I9100GDKL3
Kernal version: 2.6.35.7
se.infra@SEI-43 #2
Build number: GINGERBREAD.DZKL3
Had tried SuperOneClick2.3.3 and DooMLoRD_v4 but both fail.
I bought my Galaxy Ace S5830i last month. I hadn't installed Samsung Kies until yesterday, when I launched it it prompted a firmware upgrade. First I tried to use kies to upgrade but whenever the upgrade process started (Kies started downloading the firmware files) my device automatically got disconnected..I tried reinstalling kies, restarting my phone but nothing worked.
I then decided to use odin(v1.87) to flash the firmware on my device but it kept failing at first step itself. Here's what it said :-
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iXXLF3_S5830iODDLF1_RST_S5830iDDLF1_HOME.tar. md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
[Code] .....
The phone has been working as fine as ever. Kies never got to the step of INSTALLING the new firmware as whenever it started downloading the firmware files my phone got disconnected so no damage there.
With ODIN I entered download mode but here too it fails at the beginning, so I just switch off my phone and restart it and it works as if nothing ever happened (I've made several attempts)
I have the Samsung Galaxy Tab 3, 7" (WIFI-ONLY).
Firstly, let's start by saying that I ended up rooting it after a while because it got boring having the simple, unmodified android.
It seems creativity got the best of me, and I ended up wanting to switch back to my normal android days. The problems started when I looked for the ways to upgrade my device, and it sais my device had been modified (rooted). So then I tried deleting SuperSU, thinking that would unroot, but nope... I then went to my great friend, we all know as Google. I then found the firmware, however didn't notice it said 3G, not just WIFI.... and loaded it onto my tablet following the instructions leading me to use Odin. I now have a Samsung Galaxy Tab 3 WIFI only, with 3G Firmware.
After countless hours, days, and now weeks of trying to get it back to the normal firmware, all my attempts result in an error on Odin, and here's what I get:
First, I just load the .md5 file, and this happens.
---
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..[code]....
Now, what do I do to get my precious tablet back to normal? , since I have the 3G version, I'm required to have a sim card which I can't put in because there's no sim card slot (it's a WIFI tab). I can't even use WiFi, because it won't turn on without a SimCard.
i have a problem with bluetooth on galaxy i9100g after ics 4.0.4...
i cant open bluettooh ...
I've read a lot of topics in online and also saw a lot of video tutorial to Flash my Galaxy Y's stock ROM with odin.In Odin,I've selected every file but whenever I click 'Start' button,it shows me this message in message box.
<ID:0/010>Added!!
<ID:0/010>Odin v.3 engine (ID:10)..
<ID:0/010>File analysis..
<ID:0/010>SetupConnection..
But I can't flash my phone.Now what can I do?
[URL] .... I tried flashing via odin and recover back my device using the shown link. I got the following error as shown in image. And i am not able to install any custom rom also. Every time i do get stuck on the logo of the device. And when i remove battery it gets back to the normal recovery mode. What shall i do now the device is bricked and i cannot get it back.
View 1 Replies View RelatedSamsung Galaxy Tab GT-P1010 no display got stuck in ODIN while upgrading to GB
View 2 Replies View RelatedI'm following step by step process to root my gt-s5310 using ODIN 3.07. Started from download mode and connect to the PC is no problem at all. ODIN finished with the GREEN PASS. When I tried to open recovery mode, only android recovery mode is open(but malfunctioning, going no where when I press the home button) that recovery mode also don't has "install zip from sd card" option.
My android version is 4.1.2 . Baseband version S5310DXAME2. Kernel version 3.0.15-1521875 se.infra@SWDA2309#1
Attached is the recovery mode picture
Odin only detect my Samsung Galaxy Pocket S5300 when the power is off.
In a meanwhile:
- Odin cannot detect in Download mode.
- KIES is able to connect, detect & do the backup.
- I've tried many versions of Odins.
- Odin(s) is able to detect other phone (Galaxy Mini S5570).
- PC could detect the driver and do the file transfer.
Why only when the power off id:com turns into yellow (or green in Odin 3) ????
Is it possible to completely clean galaxy and install windows mobile or iphone software?
View 12 Replies View RelatedI am currently trying to repair a soft bricked(stuck in boot loop) Samsung Galaxy S2 (T-Mobile) . I am trying to save the info (contacts,sms,pictures..etc). Would using Odin to flash CWM Recovery and doing a nandroid backup and then restoring the phone to factory settings. Would it somehow save everything in the internal memory and fix the phone?
View 2 Replies View RelatedOEM 1.6 Packages are uploaded now.Odin files for the 1.6 OEM update are now available! All necessary files and instructions are included in the download.To use the update you will need a Windows PC, USB cable, your Behold II, and about 5 minutes.Some users are reporting that after the update the phone will temporarily be stuck in a boot loop. This seems to happen when the user has previously installed certain custom ROMs such as Take5 and Galaxy R12.The work-around requires a complete factory wipe of the phone, meaning you will lose all of your data and apps not on the SD card.
View 49 Replies View RelatedI'm trying to flash my new Galaxy using Odin (because I got it sim-free and I don't have the market). I'm doing this on WinXP inside VMWare on Linux, unfortunately. It had only this to say: <1> Added! <1> Detected!
That is, after I filled in the filename and pressed start, the two boxes went yellow and the timer began counting but there was no other output. I killed it after about 45 mins. I've tried this with the II5 (one file) and IH7 (multiple files) firmware versions linked to from this site. Now, I guess the obvious culprit here is VMWare, but it seems odd that it would find the device and then give up (and NPS and mass storage work as well as expected). Also, even if I don't connect the Galaxy to the PC, the only way I can find to leave the 'downloading...' screen is to pull out the battery - is that normal? I did try with native WinXP on an old laptop too, but it's a 7-year-old installation and it wasn't playing ball... so I'm hoping someone here has a suggestion for how to proceed that doesn't involve a fresh Windows install?
i think my gt-i7500 is bricked. i downloaded the 1.6 firmware(.tar) along with ODIN.. set up the downloading mode and used ODIN to flash it to 1.6. ODIN showed PASS in the window but the phone refuses to boot up. It remains frozen with the SAMSUNG sign. Recovery mode is not working either.
View 6 Replies View RelatedI'm looking for a program to change timestamps files (created, modified, and accessed)
I need it for Android, no for PC.
Problem is that after copy&paste photos and videos, stock gallery order it by created by, and i don't know why, but all videos always are first, and then my photos.
If now i take a photo, and after a video, i see in my stock gallery: last video created, last photo taken, all the other videos, and then older photos
Here you have a screenshot to see an example: [URL]...
Using Samsung Galaxy S3
I want to flash my phone back to android 2.1. My phone is in download mode but odin is not picking it up?
View 3 Replies View RelatedDoes mobile odin support galaxy y?
View 2 Replies View RelatedI bricked actually my phone.
I want to know now, wich is actually the best Android 4.0.3 ROM.
I know how to flash via zip and via odin.
I dont know how to flash kernel
I wanna use a Android 4.0.3 ROM with DarkKnights or Siyah Kernel, tell me what you think about it.
First flash the ROM then Kernel?
how to FLASHING my Galaxy Mini without ODIN (via PC). because my pc didn't detect my phone. me already try on windows XP, Seven, and Eight. i dont know why this is happen.
my point is.. i just want to flash my galaxy mini without PC/ODIN.
I'm trying to restore my galaxy player 5 back to stock using odin because it wouldnt boot. (boot loop) after i flash i get the samsung boot but it just keeps restarting over and over. and when i try to wipe data in recovery it asks for a password and what its supposed to be. i had screen lock disabled but i might have still had a password stored.
View 1 Replies View RelatedI just OV galaxy by setcpu but have problem phone was stopped working. So i need ROM stock version VietNam or CM7 for retry up ROM flash by odin.
View 1 Replies View RelatedI am trying to go back to stock android 4.2.2 Galaxy S4 Mini SPH-L520, and getting the following error from Odin,
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..[code].....