I tried flash cwm recovery.... it running a few second after that my phone was dead.... I try to turn on... cannot turn on.. juz have a vibrate and dead.
I think battery was empty... I try changed with another battery...still same... after that i try to recharge... cannot working to...
View 3 Replies
Rom Manager tells me "Goophone i5 does not have an officially supported ClockworkMod Recovery yet. Have you installed a ClockWorkMod recovery manually?"... If I say Yes it asks me to confirm Version 2.x or 3.x+. I don't know if a CWM was installed manually. What should I do?
I can't see a recovery file on the SD card.
I flashed Omega rom today for my galaxy note 2. It uses Aroma installer which i think could be the problem. Basically I cant boot into recovery. The rom is also very laggy where people on its development thread are praising it stability! The device will stay on the 'Samsung galaxy note II gt17100' bootscreen when i try to.boot into recovery.
View 1 Replies View Relatednote before attempting any of this that rooting does void your warranty. I also am not reponsible for any damage that is done to your phone but am more than willing to help you solve a problem in IRC. See my signature on how to get on #ally IRC channel. I do not actually use the Clockwork Recovery (i use drellisdees).
Guide to flashing roms on the LG Ally with screenshots. First off. Make sure your phone is rooted. If your phone is not rooted see the following options.
Option 1a: Universal 1 click root. (easy way) Universal Androot Beta
1b: z4root 1 click root http://forum.xda-developers.com/showthread.php?t=833953
2: Original Root Method (harder way) How to "root" the LG Ally.........
My Samsung Note 10.1(N8000) got stuck on boot screen at stock. No recovery only download mode. I don't know why, it was flat for about 2 weeks before I noticed.
Roms always and still flash successfully if I get the right version of odin, i think i have about 15 different odins from trying to fix this.
Things I've tried:
1.Flash stock rom
2.Flash custom recovery
3.Flash different versions of both 7+
4.Re-partition and repeat 1-3
5.Wipe the memory and repeat 4 with many many roms
why my tablet stopped the first time and why no roms are working to recover it. What is happening here? Is it corrupt memory or motherboard etc hardware? Is there a god .pit file or god rom that could work to make something happen? What should i try now?
This shows a successful flash which had no effect on the tablet afterwards
[URL]
I did not brick a tablet without having a cwm installed first and a nandroid backup. The tablet is an allwinner a23 not in some peoples opinion worth a lot of effort to fix. We have an identical tablet with the same firmware. If I root and install a custom recovery on the unbricked tablet can that zip be flashed without a custom recovery? I have looked about a bit and there seems to be conflicting opinions on this. The only prob I can see is the stock recovery may not have the option to wipe the dalvik cache.
C5303
my device is galaxy ace s5830i..i have already rooted my device and used CW Recovery and taken a copy of my original system.i wanted to set up a custom rom i restarted and reset and deleted the cash then installed the rom.i think it was Retribution beta then i wanted to update to that custom rom (MindCR ICS) all i did i restarted my phone of course went into R mode and reset and deleted the cash then installed that next custom rom .
after installing completed when i rebooted it only gave me (samsung galaxy ace s5830i) logo and doesn't open the system when i restart it doesn't go into recovery or download mode it only gives me again the same logo.i used odin v 1.81 and the latest version it doesn't recognize the phone and i can't go into download mode.
so i just find a new way to reboot to stock recovery on samsung galaxy ace plus GT-S7500 without flashing another custom recoveru like cwm or something like that
many people say that we cant access the stock recovery on galaxy ace plus because it have some bugs or something else.. now i found the way how to do that
just follow the simple guide how to do that :
1. reboot it using volume + and volume - ~> home button ~> power button
2. click and hold both volume button then the home button then the power button..
3. if the phone gets turned on so u need to keep hold that button until the recovery showed up (when it showed up and its get turned off again so u need to hold all the button again until it get rebooted to recovery)
4.if u get rebooted all time its not a big problem again .. all u need is just hold all that button until the phone gets turned on and release the power off button and hold it again until u boot it on recovery mode.. and done u booted up on recovery mode (im not responsible if ur phone gets bootloop or something else)
When I got my phone at the end of last year I rooted it using a Chain-Fire kernel - v 4.2, I think. After flashing, it worked perfectly, since when I have flashed the old bootloader to get my USB Jig working to remove the yellow triangle and flashed a patch again to allow the USB Jig to reset the binary counter.
I have very much wanted to install and get the new Sky Go application working.
What I had to do was flash the Stock kernel for my Stock Rom - I have never messed with my Rom - it is Gingerbread 2.3.4 in a CPW phone here in the UK.
Doing the flash and installing Voodoo OTA (to temporarily hide my root) has been enormously successful
Now then to my query....
The original Chain-Fire mod v 4.2 installed CWM.
After of course cancelling the "hide root" function to show my phone as rooted once more, I went to do a backup, using CWM but it refuses to work. It says my kernel needs v 5.0. Obviously the Stock Rom I flashed to get Sky Go working has thrown CWM some what.
I have downloaded Rom Manager from the Market but this seems not to work either - it starts to work (reboots) but then halts with the following messages: -
E : failed to verify whole-file signature
E : signature verification failed
Installation aborted
What I would like is some way of installing a backup previously made before flashing the Stock kernal and also to make a fresh backup now.
I flashed + rooted (strangely in that order, which means I must have rooted my phone ages ago.. and then locked my bootloader after flashing..?)...
I do have Rom manager installed... but I don't quite recall how I ended up flashing the stock rom onto the phone..
Anyways, as I did seem to reset my phone, I upgraded all the apk packs and I'm pretty happy with the speed upgrade + ext2 internal space expansion.
As I now want to create a nandroid backup, so I can always come back to my current status, when I want a clean reinstall..!
My main question is that as I seem to have skipped creating a CWM recovery... if I do so now, will I loose all my data and go back to the basic stock rom?
The problem I'm facing right now is that I'm unable to boot into the recovery mode using either "adb reboot recovery" or the power on + vol buttons / menu button. (which means that I don't have the recovery mode installed.....)
So.... will I loose my current upgrades + phone settings (reset into factory mode), if I flash the recovery mode?
I have this error message on my Goophone Goophone V88 i5 Dual core RAM 1GB MTK6577. When I open the camera on the phone, I get the message. (Cant connect to the camera, turn off the flashing lights or other equipment).
View 2 Replies View RelatedI am on twrp recovery version 2.1.3 and to upgrade to 2.5.0.0 I used the Google .im app but even after the message showing that recovery was flashed successfully, when I reboot into recovery I still see the 2.1.3 twrp only..So I tried flashing it with terminal emulator but it didn't work.This error shows up every time failed scanning partitions failed with error : - 1
I tried putting the .img file in the root folder as well but it didn't work..I tried naming the root of sd card as storage/emulated/legacy, storage/ emulated / 0, /sdcard, etc but it keeps on giving this error every single time!
So I was having a problem with my Optimus V (Virginmobile) and I couldn't send or receive texts. I did a factory restart thinking it would work but then found myself at the recovery menu. When I try to flash xionia_cwma_12518.6.zip it says E:cant find update script. When I try and flash CM7.2RC1_VM670-BobZhome-052012 it installs and when I reboot i get taken back to the recovery menu.
In short; My Virgin Mobile Optimus V is stuck in a recovery loop that I am unable to get out of due to an error while trying to flash ROMs/ Custom Recovery.
The error reads at the end of all attempts: E: Can't find update script.
Just rooted yesterday, and everything was running great... untill I installed Simply Stunning v4.3. I went to make a back up and found that I cannot access my recovery, it was stuck at the M. Now Rom Manager says that if this happens, flash a different recovery then flash clockwork back. Here is the catch- When I try to flash a different recovery I get this, "An error occurred while flashing your recovery."
View 9 Replies View RelatedSo I upgraded to the nexus 5 and sold my phone to a friend yesterday. He claims that he has not deleted anything and that is froze and just stopped working.
I have the phone connected to my computer where the phones LED notification light is red but will not turn on or even boot into recovery. My computer isn't recognizing it as a device either.
Nexus 4
CM11 (latest update)
recovery is CWM
What may have caused this. and if its bricked how to unbrick it if possible?
Well I decided to have a play and rooted my phone using the unrevoked method. All quite painless.
I flashed a version of DeFrost (2.2) and had a play, but encountered a couple of problems.
So I flashed 2.3 when is became available.
Then I haf problems with battery drain. Since then there have been a number of new releases of DeFrost - pretty much every day.
So I decided to restore my Nandroid backup and stick with the stock ROM until things settle down a bit.
Having done this, I can no longer get into recovery. The phone hangs on the Pink Circle screen and I have to pull the battery.
So has restoring the Nandroid backup which was made using the ClockWorkMod Recovery destroyed the recovery flash, and is that what you would expect or has something bizarre happened to me.
Just curious as I assumed that once the Recovery was on there it would stay there.
It's no big deal as I'm sure it will be just as easy to go through the rooting process again.
I've been trying to load amonRA's recovery for my nexus one. I've managed to unlock the bootloader, and gain SU permissions. But for the life of me,I cant seem to flash the new recovery image. I've used better terminal, and it says that theres no flash image found. But I have Put it on SD Card. I've copied the text correctly and I cant get it to flash. I've also tried to downgrade the radio to get better reception, and its saying that the update isn't signed. Is there something still locked up?
View 6 Replies View RelatedI have a rooted 2.1 eris and adb is all set up. I get all the way down to the commands and the last one:
adb shell flash_image recovery /sdcard/recovery.img
says file not found. What am I doing wrong
I just rolled back using simple root, and before I started flashing custom roms I wanted to flash Amon RA's recovery-RA-evo-v1.8.0.img. I've tried flashing through terminal emulator, and that didn't work. I also tried flashing through adb. I have confirmed that I have root, but it's telling me that there is no image found. Does anyone have any suggestions? Thanks in advance.
View 2 Replies View RelatedI'm using clockworkmod recovery and I was wonding if there was a simple way to flash the stock recovery back I wanted to do this because my updates not instaling.
View 9 Replies View RelatedI have been able to flash velocity 0.2 and then decided to upgrade to 0.3. When I did, I looked into flashing the turbo kernel for ally. Followed the instructions as said and now I have the choice to boot to recovery or if I let the boot go all the way through it gets stuck after the verizon logo. When I try to flash a different ROM, I hit install from SD card and everytime, no matter which ROM I pick, it starts updating but says opening file, then like 2 more lines saying opening, then it stops the install.
View 2 Replies View RelatedI'm currently running Froyo after running the RUU: RUU_Bravo_Froyo_HTC_WWE_2.09.405.8_Radio_32.43.00.
32U_5.09.00.20_release_140022_signed.exe
as per teppic74's thread over here: Froyo RUU update available
My desire has HBOOT 083 - which I know can be problematic when flashing. My question is:
Is the unrEVOked v3.21 method of getting the new recovery menu the best/easiest/most reliable way to enable me to flash new roms on my phone? Are there any caveats? Anything I should be aware of beforehand? According to teppic74's thread, this version of Froyo cannot be rooted at the moment, which I'm not bothered about anyway. But, it would be nice to try some of those lovely new roms.
I'm trying to flash the newest Amon ra image and I'm not getting very far. For one thing I keep getting 'error device not found.'
View 2 Replies View RelatedI have never flashed a phone before. I followed instructions for ODIN. I installed the ADB drivers as indicated. (I had them installed on my windows 7 laptop previously for use with PDA net.) I shut down my phone then enter recovery mode. I then plug my phone into the computer and it never shows up as connected. I have tried this on my new IBM Thinkpad R500 (windows 7 32 bit) and on an older IBM laptop running Windows XP. I have used these same computers and phone connection before when I added MP3's to the phone.
When I let the phone boot up normally, both computers then recognize it and I can transfer files and such. I have uninstalled and reinstalled the ADB drivers multiple times, when the phone boots up normally I can use PDANet just fine so I doubt it is the connection. Is there something special I need to change in the phone settings before I shut it down and enter recovery mode? It seems like the phone isn't loading something as it boots into recovery mode. That it loads when I let it boot normally.
I've got the rooted 2.1, easy. I've got all the java and adk and what not I got the flash_image and recovery.img. The command prompts all work fine till the last command, (I've tried 2 different chain of commands both work until a certain point).
adb shell mount -o rw,remount /dev/block/mtdblock3 /system
adb push recovery.img /sdcard
adb push flash_image /system/bin
adb shell chmod 755 /system/bin/flash_image
adb shell flash_image recovery /sdcard/recovery.img
(After this one it says it cannot find flash recovery or image, cant exactly remember.)
- Open the Terminal and copy and paste the following commands with the phone connected to your computer.
- adb shell [hit enter]
- su [hit enter]
- flash_image recovery /sdcard/recovery-RA-eris-v1.6.2.img (once again not found but I believe I followed correctly) this the end of commands the first half worked fine.
I rooted my stock 2.2 Evo a few days ago and have been loving CM6 on it. I had Clockwork Recovery 2.5.0.1 installed and finally got used to using it. I read that ROM manager was a nice graphical interface to CWR so I went to check it out. Unfortunately I couldn't do anything at all in it. Every time I tried to do anything it said I needed Clockwork Recovery installed. This confused me because it already was installed.
I would try to install it anyways, I would select "Evo CDMA" and then it would fail every time. I decided I would try to install Amon-Ra instead, and then just flash back. ROM Manager was able to flash Amon-Ra easily, but now still gives me an error every time I try to install Clockwork. I'm still new to the whole rooting scene and this is the first problem I've run into. Also, I already tried Fixing User Permissions.
Installed Flash Rec after trying to root my hero (following the guide stickied to the top of this forum) and its not giving me the button/menu item to flash it. My options are to Download Recovery Image (Grayed out) or Restore Backup Image which once clicked gives information 'Backup Complete'. How do I proceed?
View 3 Replies View RelatedI rooted my android device with froyo yesterday. I installed the rom manager and its associated programs. Then I downloaded and installed the Cyanogen 6.0 mod. I was able to install the mod yesterday but I did not wipe my data clean which made the startup screen loop. I restored my phone, and now I can not reinstall the Cyanogen 6.0 mod. I go into the rom manager and select download, I select to wipe my data and to backup the system, then I restart in the Clock Work Recovery Mod. Once there I can not find the Cyanogen 6.0 to flash. I have been trying to get this to work for the past 24 hours!
View 2 Replies View RelatedI have already rooted my hero but I did not flash a recovery image or perform a nandroid back up mostly because I could not find clear instructions on how to do so, which caused me to have to completely wipe my phone and start over after I deleted some programs that caused my loop over and over. I know the commands I need to run in adb to flash the recovery image but I do not know where to download the recovery image or where I need to store it I also can't find anything on nandroid back could somone please explain these in detail with the steps I need to take so I don't need to start from square one again.
View 1 Replies View RelatedI am running plainJane and want to change my font by flashing .zip on recovery. Can some one either point me to a list of fonts or post a list that I can download straight from my phone?
View 2 Replies View Related