General :: Can't Go Into Recovery Or Download Mode After Flashing Bricked
Nov 26, 2012
my device is galaxy ace s5830i..i have already rooted my device and used CW Recovery and taken a copy of my original system.i wanted to set up a custom rom i restarted and reset and deleted the cash then installed the rom.i think it was Retribution beta then i wanted to update to that custom rom (MindCR ICS) all i did i restarted my phone of course went into R mode and reset and deleted the cash then installed that next custom rom .
after installing completed when i rebooted it only gave me (samsung galaxy ace s5830i) logo and doesn't open the system when i restart it doesn't go into recovery or download mode it only gives me again the same logo.i used odin v 1.81 and the latest version it doesn't recognize the phone and i can't go into download mode.
View 1 Replies
Apr 24, 2014
I have the D-800 AT&T LG G2, It was rooted with KitKat 4.4.2. After I rooted my phone, I tried several different ways to install TWRP onto it. I tried FreeGee, adb shell, and straight from TWRP App, nothing worked, because when I tried to boot into TWRP it would just come up with the LG Logo and "Secure Boot Error" and "Certification Error" or something like that, then be a blank screen. I then just held the power button to turn it off, and it would turn back on and run fine, no problem. I figured it never installed right, and so I left TWRP alone. I know you are not supposed to take an OTA after install TWRP, but thinking TWRP never installed on the phone, I took the OTA, and now it will do the "Error" messages and blank screen, but my power off, power on trick doesn't work anymore. I can boot into Recovery Mode, but when I do a Factory Reset, the screen just goes blank. I have tried to put it into Download Mode by pressing Volume Up + Power when hooked up to a PC, but nothing happens. I feel as though its a tough brick.
View 4 Replies
View Related
Jul 5, 2012
Its been on the download screen for maybe five minutes or so. How do I know when I'm stuck? I don't want to interfere with it by pulling the battery if it just happens to take a while.
View 1 Replies
View Related
Jun 29, 2013
I flashed + rooted (strangely in that order, which means I must have rooted my phone ages ago.. and then locked my bootloader after flashing..?)...
I do have Rom manager installed... but I don't quite recall how I ended up flashing the stock rom onto the phone..
Anyways, as I did seem to reset my phone, I upgraded all the apk packs and I'm pretty happy with the speed upgrade + ext2 internal space expansion.
As I now want to create a nandroid backup, so I can always come back to my current status, when I want a clean reinstall..!
My main question is that as I seem to have skipped creating a CWM recovery... if I do so now, will I loose all my data and go back to the basic stock rom?
The problem I'm facing right now is that I'm unable to boot into the recovery mode using either "adb reboot recovery" or the power on + vol buttons / menu button. (which means that I don't have the recovery mode installed.....)
So.... will I loose my current upgrades + phone settings (reset into factory mode), if I flash the recovery mode?
View 5 Replies
View Related
Apr 19, 2014
My phone is not booting, it just stop on 'samsung galaxy s3 gt-i9300' and it reboots
I can't enter download or recovery mode. The phone starts on itself without pressing the power button.
View 1 Replies
View Related
May 18, 2014
So I have a Samsung Galaxy Ace 2 X (GT-7560M) and basically I tried to flash CM11 on it, and when after the reboot, the phone was stuck in a boot loop and I can not access nor the Recovery mode nor the Download mode. I did try a USB jig and still no luck.
View 3 Replies
View Related
May 31, 2014
I tried to do a cyanogenmod update, but something went wrong and now I can't boot into android. I've tried going back into the recovery mode to reflash the rom, but it freezes there. I've also tried flashing clockworkmod recovery through ODIN and download mode, but the download back never moves at all, so I'm not sure if I can't use download mode or if it's just that ODIN isn't doing anything.
View 9 Replies
View Related
Aug 28, 2010
Just FYI in case anyone wants to know: For download mode, with the phone turned off, fold the number 1 key on the QWERTY keyboard and the power button simultaneously For recovery mode, with the phone turned off, hold Volume Down, CAmera, and Power simultaneously. You navigate with volume UP/DOWN, select with HOME, Menu toggles to "Manual Mode", whatever that it.
View 3 Replies
View Related
Jul 19, 2010
I have never flashed a phone before. I followed instructions for ODIN. I installed the ADB drivers as indicated. (I had them installed on my windows 7 laptop previously for use with PDA net.) I shut down my phone then enter recovery mode. I then plug my phone into the computer and it never shows up as connected. I have tried this on my new IBM Thinkpad R500 (windows 7 32 bit) and on an older IBM laptop running Windows XP. I have used these same computers and phone connection before when I added MP3's to the phone.
When I let the phone boot up normally, both computers then recognize it and I can transfer files and such. I have uninstalled and reinstalled the ADB drivers multiple times, when the phone boots up normally I can use PDANet just fine so I doubt it is the connection. Is there something special I need to change in the phone settings before I shut it down and enter recovery mode? It seems like the phone isn't loading something as it boots into recovery mode. That it loads when I let it boot normally.
View 6 Replies
View Related
Aug 18, 2010
I rooted my android device with froyo yesterday. I installed the rom manager and its associated programs. Then I downloaded and installed the Cyanogen 6.0 mod. I was able to install the mod yesterday but I did not wipe my data clean which made the startup screen loop. I restored my phone, and now I can not reinstall the Cyanogen 6.0 mod. I go into the rom manager and select download, I select to wipe my data and to backup the system, then I restart in the Clock Work Recovery Mod. Once there I can not find the Cyanogen 6.0 to flash. I have been trying to get this to work for the past 24 hours!
View 2 Replies
View Related
Jun 25, 2012
Cant enter recovery as that reboot loops the cyanogenmod image, can I maybe use a custom flasher and flash the euro open BIN?
View 2 Replies
View Related
Feb 11, 2013
after a rom flashing, my phone got bricked
I have a i9300 mtk6575 phone, do you know how can I unbrick it? Right now it doesnt even charge when plugged to usb o charger, does not turn on , and doesnt react to any button pressing combination...
View 1 Replies
View Related
Oct 25, 2012
my xperia x8 got hard bricked after flashing gingerDX rom..now my phone got stuck on sony ericsson start up and cannot boot into logo and so on. is there any software can reflash it back??
View 3 Replies
View Related
Feb 12, 2014
how would I go about flashing a stock rom to a bricked nexus 4? ( wont boot or boot into recovery)
View 6 Replies
View Related
Nov 20, 2013
I have samsung galaxy pocket duos gt s5302..I have rooted it and flashed CWM recovery then I tried to flash custom compact kernel made by Deadly. After I flashed through CWM my phone got hard bricked It wont turn on What should I do?
View 6 Replies
View Related
Aug 26, 2013
I was able to root my device correctly .. The issue started when I tried to install CWR by odin.. got into a starter loop or logo loop?
I then used my google fu to try and rectify the problem and ended up bricking it. But It can go into the down load mode. .
View 3 Replies
View Related
Apr 29, 2013
i had a half bricked tablet. it was able to boot into recovery and i installed a rom and now it boots but the android sign is all screwed up and i cant get into CWM anymore.. am i done for?
View 4 Replies
View Related
Apr 3, 2014
Friends of Jupiter Huawei g525-u00and have been asked Ram Kastvm able but Alanmshkl. Already green screen after power ... not that fast boot mode will not go into recovery mode and not the original ROM using loam bottom half Vbala White gets going
View 5 Replies
View Related
May 26, 2014
I have an Allwinner A10 clone (Kurio 7), it is designed for kids but otherwise a standard android tablet. After hours of googling I rooted and installed CWM & Gapps (not included in the stock ROM). So far so good. The stock ROM was causing issues with some apps, it needed to go.
I flashed CM10 and it worked but no touch screen. It needed a compatibility flash to make it work. You can guess what's coming. I picked the wrong one and now the device does the following:
Reboot loop
Black screen (backlight though)
PWR+Vol up no longer gets to recovery
Vibrates constantly between reboots (due to wrong patch I'm guessing)
ADB picks up the device for a split second between reboots but "adb reboot recovery" does nothing. Even when using wait command. Tried "fastboot flash recovery cwm.img" after wait command, no luck. Is there anything else I can try?
View 1 Replies
View Related
Apr 28, 2013
Rom Manager tells me "Goophone i5 does not have an officially supported ClockworkMod Recovery yet. Have you installed a ClockWorkMod recovery manually?"... If I say Yes it asks me to confirm Version 2.x or 3.x+. I don't know if a CWM was installed manually. What should I do?
I can't see a recovery file on the SD card.
View 1 Replies
View Related
Oct 15, 2012
I flashed Omega rom today for my galaxy note 2. It uses Aroma installer which i think could be the problem. Basically I cant boot into recovery. The rom is also very laggy where people on its development thread are praising it stability! The device will stay on the 'Samsung galaxy note II gt17100' bootscreen when i try to.boot into recovery.
View 1 Replies
View Related
Sep 10, 2010
note before attempting any of this that rooting does void your warranty. I also am not reponsible for any damage that is done to your phone but am more than willing to help you solve a problem in IRC. See my signature on how to get on #ally IRC channel. I do not actually use the Clockwork Recovery (i use drellisdees).
Guide to flashing roms on the LG Ally with screenshots. First off. Make sure your phone is rooted. If your phone is not rooted see the following options.
Option 1a: Universal 1 click root. (easy way) Universal Androot Beta
1b: z4root 1 click root http://forum.xda-developers.com/showthread.php?t=833953
2: Original Root Method (harder way) How to "root" the LG Ally.........
View 17 Replies
View Related
Apr 13, 2013
I tried flash cwm recovery.... it running a few second after that my phone was dead.... I try to turn on... cannot turn on.. juz have a vibrate and dead.
I think battery was empty... I try changed with another battery...still same... after that i try to recharge... cannot working to...
View 3 Replies
View Related
Jan 14, 2014
My Samsung Note 10.1(N8000) got stuck on boot screen at stock. No recovery only download mode. I don't know why, it was flat for about 2 weeks before I noticed.
Roms always and still flash successfully if I get the right version of odin, i think i have about 15 different odins from trying to fix this.
Things I've tried:
1.Flash stock rom
2.Flash custom recovery
3.Flash different versions of both 7+
4.Re-partition and repeat 1-3
5.Wipe the memory and repeat 4 with many many roms
why my tablet stopped the first time and why no roms are working to recover it. What is happening here? Is it corrupt memory or motherboard etc hardware? Is there a god .pit file or god rom that could work to make something happen? What should i try now?
This shows a successful flash which had no effect on the tablet afterwards
[URL]
View 1 Replies
View Related
Mar 17, 2014
I did not brick a tablet without having a cwm installed first and a nandroid backup. The tablet is an allwinner a23 not in some peoples opinion worth a lot of effort to fix. We have an identical tablet with the same firmware. If I root and install a custom recovery on the unbricked tablet can that zip be flashed without a custom recovery? I have looked about a bit and there seems to be conflicting opinions on this. The only prob I can see is the stock recovery may not have the option to wipe the dalvik cache.
C5303
View 9 Replies
View Related
Jan 21, 2013
so i just find a new way to reboot to stock recovery on samsung galaxy ace plus GT-S7500 without flashing another custom recoveru like cwm or something like that
many people say that we cant access the stock recovery on galaxy ace plus because it have some bugs or something else.. now i found the way how to do that
just follow the simple guide how to do that :
1. reboot it using volume + and volume - ~> home button ~> power button
2. click and hold both volume button then the home button then the power button..
3. if the phone gets turned on so u need to keep hold that button until the recovery showed up (when it showed up and its get turned off again so u need to hold all the button again until it get rebooted to recovery)
4.if u get rebooted all time its not a big problem again .. all u need is just hold all that button until the phone gets turned on and release the power off button and hold it again until u boot it on recovery mode.. and done u booted up on recovery mode (im not responsible if ur phone gets bootloop or something else)
View 3 Replies
View Related
Feb 25, 2012
When I got my phone at the end of last year I rooted it using a Chain-Fire kernel - v 4.2, I think. After flashing, it worked perfectly, since when I have flashed the old bootloader to get my USB Jig working to remove the yellow triangle and flashed a patch again to allow the USB Jig to reset the binary counter.
I have very much wanted to install and get the new Sky Go application working.
What I had to do was flash the Stock kernel for my Stock Rom - I have never messed with my Rom - it is Gingerbread 2.3.4 in a CPW phone here in the UK.
Doing the flash and installing Voodoo OTA (to temporarily hide my root) has been enormously successful
Now then to my query....
The original Chain-Fire mod v 4.2 installed CWM.
After of course cancelling the "hide root" function to show my phone as rooted once more, I went to do a backup, using CWM but it refuses to work. It says my kernel needs v 5.0. Obviously the Stock Rom I flashed to get Sky Go working has thrown CWM some what.
I have downloaded Rom Manager from the Market but this seems not to work either - it starts to work (reboots) but then halts with the following messages: -
E : failed to verify whole-file signature
E : signature verification failed
Installation aborted
What I would like is some way of installing a backup previously made before flashing the Stock kernal and also to make a fresh backup now.
View 3 Replies
View Related
Jun 9, 2013
I am on twrp recovery version 2.1.3 and to upgrade to 2.5.0.0 I used the Google .im app but even after the message showing that recovery was flashed successfully, when I reboot into recovery I still see the 2.1.3 twrp only..So I tried flashing it with terminal emulator but it didn't work.This error shows up every time failed scanning partitions failed with error : - 1
I tried putting the .img file in the root folder as well but it didn't work..I tried naming the root of sd card as storage/emulated/legacy, storage/ emulated / 0, /sdcard, etc but it keeps on giving this error every single time!
View 1 Replies
View Related
Jan 9, 2013
So I was having a problem with my Optimus V (Virginmobile) and I couldn't send or receive texts. I did a factory restart thinking it would work but then found myself at the recovery menu. When I try to flash xionia_cwma_12518.6.zip it says E:cant find update script. When I try and flash CM7.2RC1_VM670-BobZhome-052012 it installs and when I reboot i get taken back to the recovery menu.
In short; My Virgin Mobile Optimus V is stuck in a recovery loop that I am unable to get out of due to an error while trying to flash ROMs/ Custom Recovery.
The error reads at the end of all attempts: E: Can't find update script.
View 1 Replies
View Related
Apr 15, 2014
I have a Samsung Galaxy S Plus where, after flashing CWM with Odin, and installing cm11, I'm stuck on an infinite boot animation. But that is not the big issue. I need to enter Recovery Mode, where I have a backup, but the problem is that my Volume Up button is not working, so I can't use the Power Button and Volume Up(I also don't know what could possibly wrong with it) one to get there. So I was wondering if there is some other method to enter Recovery, I suppose by computer. I think that when I used Odin, the device restarted being in Download Mode, and I think that it hasn't to be On to do that.
View 1 Replies
View Related
