General :: Nexus 4 - LED Notification Light Red But Will Not Turn On Or Even Boot Into Recovery
Feb 11, 2014
So I upgraded to the nexus 5 and sold my phone to a friend yesterday. He claims that he has not deleted anything and that is froze and just stopped working.
I have the phone connected to my computer where the phones LED notification light is red but will not turn on or even boot into recovery. My computer isn't recognizing it as a device either.
Nexus 4
CM11 (latest update)
recovery is CWM
What may have caused this. and if its bricked how to unbrick it if possible?
View 8 Replies
Jul 3, 2010
Last night my Trackball changed from white to blue and refuses to turn off. I don't have bluetooth on and have been using 2.2 build frf83 for about a week and yesterday while watching tv i noticed the change. Has anyone else encountered this problem. oh yeah if the phone rings then it starts flashing white but after i hang up it will return to the constant blue.
View 5 Replies
View Related
Jul 24, 2010
I was wondering if anyone knows how to turn on the charging notification light on the DX? I can't seem to find anyway to get it to work.
View 9 Replies
View Related
Oct 29, 2010
I have a Nexus one and I have made a bit of a mess of it when loading a custom rom. Previously I'd rooted (without unlocking) the stock (2.2) rom before loading Cyanogen 6, later Cyanogen nightlies and finally eViL-NXSense-v1213. I was rather enjoying the last one but had severe stability issues which I think was due to using Titanium Backup and restoring data. I was in the process of re-imaging to eViL-NXSense-v1213 after clearing the SD card, data and various caches when something seemed to happen to the recovery image. I can get into the boot loader but if I select Recovery it shows the Nexus One logo indefinitely and doesn't respond to the power button being pressed, the same happens if I turn it on from cold.
Is it possible that the recovery image has somehow been corrupted? If so what can I do to restore a recovery image that will enable me to install a custom rom. I would prefer not to unlock the boot loader but will do it if necessary.
View 1 Replies
View Related
Oct 4, 2012
I try to understand android boot sequence on my JB (under CM10). I found some docs and there should be specific partitions (boot, recovery, system, cache, data).
My understanding of the boot sequence is now:
A) normal boot:
1) Power ON ->
2) bootloader ->
3) boot-partition where i flashed the kernel aka boot.img ->
4a) system-partition with the OS (libs, UI, etc) where i unpacked over CWM my customROM.zip ->
4b) data-partition, where i unpacked google-apps.zip and installed all the apps ->
4c) cache-partition with user data
B) recovery boot (adb reboot recovery):
1) Power ON ->
2) bootloader ->
3) recovery-partition with CWM where i may unpack all the .zip stuff to proper partitions, or restore from sdcard, etc.
Is this correct? I wonder, because i didn't installed CWM into recovery-partition. It cames from install of CM10 (fastboot -i 0xfce flash boot boot.img), so it must be in boot-partition and not in recovery?
So, next confusion: i looked up to /proc/mtd and i don't see neither boot nor recovery partition here:
Quote:
# cat /proc/mtd
dev: size erasesize name
mtd0: 19000000 00040000 "system"
mtd1: 00600000 00040000 "appslog"
mtd2: 06580000 00040000 "cache"
mtd3: 1a400000 00040000 "userdata"
I did a backup with CWM and loocked the data. There aren't boot, and recovery backups:
Quote:
# ls -lha /sdcard/clockworkmod/backup/2012-10-04.18.49.55/
d---rwxr-x 2 system sdcard_r 4.0K Oct 4 18:56 .
d---rwxr-x 3 system sdcard_r 4.0K Oct 4 18:49 ..
----rwxr-x 1 system sdcard_r 1.6K Oct 4 18:54 .android_secure.vfat.dup
----rwxr-x 1 system sdcard_r 54.6M Oct 4 18:55 cache.yaffs2.img
----rwxr-x 1 system sdcard_r 360.2M Oct 4 18:53 data.yaffs2.img
----rwxr-x 1 system sdcard_r 212 Oct 4 18:56 nandroid.md5
----rwxr-x 1 system sdcard_r 214.6M Oct 4 18:51 system.yaffs2.img
#
So, i think i didn't understand the boot sequence and partition schema corectly.
View 2 Replies
View Related
Mar 21, 2012
I have a HTC amaze, I would like to turn the lights off behind the home, menu, back & search button.
View 2 Replies
View Related
Sep 27, 2013
my galaxy s4 led light doesn't turn off. it always show blue light even when i turn off the phone . i have reset the phone for 2 times. it has the some problems.
View 1 Replies
View Related
Apr 17, 2013
My phone has been been on the charger but it won't charge , theres an orange blinking light though the pulsates , no matter how long I leave my phone on the charge it won't turn on what do I do?
View 1 Replies
View Related
Oct 1, 2012
I was wondering how I could turn off the blinking green light on my phone every time I get a text. If I don't clear my notifications of the new text(s) right away, the blinking light kills my battery. I do want to keep the notification on my drop down bar, I just want the blinking light to stop. Is there anyway to do this? I know I can take off the blinking light and drop down bar notification, but I don't want both gone, only the blinking light.
View 2 Replies
View Related
Apr 29, 2013
I recently had my phone (Samsung Galaxy S3) rooted and flashed. When I receive an incoming call, the strobe light is flashing. How do I turn this off?
I have 3 Minit Settings.. not sure if this means anything.
View 2 Replies
View Related
Jan 24, 2012
I am looking for an app that uses the Button lights for notification purposes. (Stock 2.3.6 fw)I now there is one that uses the LED flash light, lcd backlight and Amoled but I only want .When looking with logcat I saw these lines:
PowerManagerService( 166): setLightBrightness : mButtonLight : 102
PowerManagerService( 166): setLightBrightness : mButtonLight : 0
Is it possible to use them for notification purposes? Is it already done? But I cannot get them off again. Can the PowerMangerService be used to do that in 2.3.6?
View 2 Replies
View Related
Mar 18, 2012
i just bought my new galaxy w.when i get a text or other notification from the facebook or twitter the LED didn't light up.
View 3 Replies
View Related
May 30, 2013
Previously, I was just using the stock calendar app on my GNex (whatever would come with the gapps package from 3/1), but I noticed the Play Store version got updated, and my stock one couldn't "update" to that version for whatever reason. So, I installed the one from the Play Store and disabled the stock app.
I always let any calendar events leave a notification in my notification pull down menu, because it's a good easy reminder that I have something to do in the near future (so I don't forget, duh). But with this new Play Store version, if I leave the item in my notification bar, when my screen is off, the notification LED constantly blinks white. It never did this on the stock version. I want it to stop doing that, but I can't find anything in the settings of the app specifically related to the LED. I just see the option to turn notifications on or off, but I want to keep the actual notification in my pull down bar. Is that possible, or no?
View 5 Replies
View Related
Feb 2, 2014
I'm Recently bought the Samsung Galaxy Ace 3 (3G), and when it's charging, the LED Light is not turn on? And when im received notification, the LED is not turn on? Is there a setting to turn it on?
View 1 Replies
View Related
Dec 15, 2012
How can I change the system default light blue color? I'd like to make it some sort of green. I'm talking about the light blue in such icons in the attached screen shots as the battery icon, the keyboard words, and the bottom bar when pulling down the notification tray. I assume it's just one setting somewhere because it's all the same blue. I am using Nova Launcher and would prefer not to root but might if necessary. I'm using the latest version of Jelly Bean on a Nexus 4
View 3 Replies
View Related
Dec 13, 2013
I have a new ace 3 LTE S7275R. I tried installing CWM recovery found here: URL....I tried with odin 3.07 and 1.85Every time, odin shows success, but when trying to boot into recovery, the phone gets stuck at "recovery booting...."The phone is otherwise working...getting CWM to work? how can I return to stock recovery at least?
View 4 Replies
View Related
Oct 17, 2013
So I just got my S4 rooted and everything seems correct. I then installed Rom Manager so I could start demoing some of the ROMs out there. Went through all the steps to flash Rom manager as the recovery but I cannot get my recovery to go to CWM, it just keeps going to the stock android recovery. I have googled the crap out of this and am coming up with nothing. in fact I have written several android apps but this just does not work.
My device is a Verizon Samsung S4 model SCH-I545 running android version 4.2.2 Kernal: 3.3.0-690088se.infra@S0210-13#1
View 3 Replies
View Related
Jan 15, 2010
Can anyone tell me where the light sensor is positioned on the Nexus One? One of the reasons I returned the Droid was I hated how the light sensor was positioned in the upper right corner. My fingers would frequently block it causing the auto-brightness to change unnecessarily and annoyingly. I know on the Droid Eris it is on the left and I'm hoping HTC did the same with the Nexus One.
View 3 Replies
View Related
Mar 27, 2013
i wanted to upgrade my galaxy s2 g i9100 and since that time i hve not been able to use the phone again.
i tried rooting it but after that i can not boot recovery anymore all that comes on the screen is SAMSUNG GALAXY SII with a yellow triangle.even if i press the up volume key+home key+power nothing happens.
View 1 Replies
View Related
Apr 10, 2014
I have a Karbonn A6 phone given to me by my friend because it was locked. It's asking for gmail user/pass but he doesn't have it. I tried to boot into recovery mode using Power+Volume Up button but all I get is a white triangle with an exclamation mark in it. I can't seem to go beyond that. USB debugging was perhaps not enabled unless it was enabled by default. There is no camera button, only power and Volume Up/Down. What do I do?
I just need to get this phone working somehow. Is there a way to use a computer and a USB cable to get it running?
View 2 Replies
View Related
Sep 25, 2011
I have tried using rom manager, holding the power button and selecting reboot recorvery, and by holding the power button and x. Each way I see the white m twice then the phone just boots up. I am running cm7 7.0.3. I have only had the phone for a week, I am trying to wait for the vigor. It worked fine Friday when I flashed cm7
View 4 Replies
View Related
Oct 11, 2011
I'm on a Galaxy S2 running Gingerbread 2.3.4, my baseband version is I9100XXKI1 and my kernel version is 2.6.35.7-I9100XWKH4-CL487028root@DELL136 #2
Using Odin3 v1.85 and S2 Root. (Superoneclick kept freezing on me)
My aim is to install Cyanogenmod 7.1.
So far I started off by trying to flash it with XWKDD Insecure, which I believe is wrong? However after rooting it, I installed ClockworkMod Recovery, downloaded the ROM and tried installing it - which is where the problem started - I kept getting the error in recovery mode 'Invalid whole-file signature'.
It just wouldn't boot in to ClockworkMod Recovery.
So after some digging around I managed to find a file to flash to my device for the CWM Recovery mode, tried it, and it worked. However, I still couldn't install Cyanogenmod from my SDcard.
I tried it a few times, wiped/formatted a few times and ended up getting my device stuck in a bootloop.
So, I've managed to get it out of the boot loop, and started fresh...
I flashed it with XWKH4 Insecure, unrooted, rerooted etc.
I've downloaded CWM again, downloaded the Cyanogenmod again, tried installing it, and once again it's gone back into Androids recovery and failed to install because of the 'whole-file signature' and failing to verify it.
I did post this in Q&A as well, however it doesn't seem to be as popular a forum as this one, I'm not really looking to wait for days for a response.
View 9 Replies
View Related
Jul 3, 2012
I rooted my phone using Z4 then used Titanium Backup for backing up and then recovery. Now while rebooting into recovery mode the phone took a long time in booting so I removed the battery and tried to reboot. But the phone makes the signature sound and after that only displays the following word 'spice'.
View 2 Replies
View Related
Oct 15, 2012
I flashed Omega rom today for my galaxy note 2. It uses Aroma installer which i think could be the problem. Basically I cant boot into recovery. The rom is also very laggy where people on its development thread are praising it stability! The device will stay on the 'Samsung galaxy note II gt17100' bootscreen when i try to.boot into recovery.
View 1 Replies
View Related
Oct 17, 2013
i have a cheap alwinner a13 tablet (simmtronics xpad x720) from indian manufacturer. It is stuck at cwm recovery it countineously boots to cwm after restart.I have no backup stock rom. But i can sideload zip from adb or external ed. And not able to mount internal sd or wipe cache.
View 5 Replies
View Related
Mar 10, 2013
I just tried to install an custom rom at my Android, i unlocked it on HTCdev`s site, but i think i was a little fast with the DooMLoRD_v2_ROOT-zergRush-busybox-su.zip
I then bootet the phone into fastboot, and did the command fastboot flash boot boot.img, this worked very fine but now the phone wont boot.
I think maybe the phone is unlocked, but it is S-ON. I have tried diffrent recovery modes with the fastboot flash recovery recovery.img etc, but none of them are working.
Now im sitting with a phone that wont boot at all, what to do?
Is it possible to keep going on with the custom rom install, or can i resett the phone into the stock rom?
View 3 Replies
View Related
Aug 8, 2012
I want to change the Black background in the Statusbar and Notificationbar to lightblue. Then i want to change Blue Textes in Statusbar/Notificationbar to White. And then, i want to change the Clockposition to middle in the Statusbar.
I followed many tutorials but always got a error at compiling
System:
CyanogenMod 9 (4.0.4)
View 1 Replies
View Related
Aug 11, 2010
ok, so I put the PB31IMG file on my sdcard, and the dinc_ota. I changed dinc_ota to update. (I did not name the file update.zip.zip) I powered down, I entered bootloader, and it loaded the PB31IMG and whatever. then I hit volume down and selected recovery. this brought me to clockwork recovery. I noticed the isntructions said to boot into STOCK recovery. well, I like a dummy ignored that and tried to apply the update.zip thru clockwork.
This is what I got:
CODE:.......................
So, is this because I tried doing it through clockwork recovery? is it because I didn't apply the first OTA update we got? what does that mean exactly anyways? is it saying I need to install the leaked froyo ROM, and then update the radio? How do I boot into stock recovery and not clockworks recovery? does this count as applying the update.zip once, meening if I do it again I'll brick my phone? should I sell this thing and get a samsung flip phone because I'm too stupid to own a Dinc?
View 2 Replies
View Related
May 14, 2013
I have an Android tablet (Diablotek D2-721, very cheap I know, but it serves its purpose) that is stuck in a boot loop. The real problem here is that this device apparently does not have any sort of recovery mode and being in a boot loop means it does not get recognized by ADB or any firmware flashing software.
I researched all day yesterday perusing forum after forum but almost every single solution requires booting into recovery.
View 1 Replies
View Related
Jun 3, 2013
My EVO 3D (Sprint) is rooted and is on android version 2.3.4 and I believe it's not an android official release, this is how it was given to me. I'm trying to install CM10.1
I installed ClockworkMod 5.0.2.0 using ROM Manager and since then I haven't been able to boot into recovery mode. I can get into bootloader but not recovery. I've tried powering it on with the volume button down, using the recovery reboot option, and tried using "Reboot into Recovery" in ROM Manager, but I keep seeing the same thing. It boots with the HTC logo then goes black then at this point i believe I should be seeing recovery mode but instead I see the HTC logo again and then it just boots like normal. Is there something I did wrong and is there a way to get recovery to work again?
View 2 Replies
View Related
