General :: Can't Boot Into Recovery After Flashing A Rom
Oct 15, 2012
I flashed Omega rom today for my galaxy note 2. It uses Aroma installer which i think could be the problem. Basically I cant boot into recovery. The rom is also very laggy where people on its development thread are praising it stability! The device will stay on the 'Samsung galaxy note II gt17100' bootscreen when i try to.boot into recovery.
View 1 Replies
Jan 14, 2014
My Samsung Note 10.1(N8000) got stuck on boot screen at stock. No recovery only download mode. I don't know why, it was flat for about 2 weeks before I noticed.
Roms always and still flash successfully if I get the right version of odin, i think i have about 15 different odins from trying to fix this.
Things I've tried:
1.Flash stock rom
2.Flash custom recovery
3.Flash different versions of both 7+
4.Re-partition and repeat 1-3
5.Wipe the memory and repeat 4 with many many roms
why my tablet stopped the first time and why no roms are working to recover it. What is happening here? Is it corrupt memory or motherboard etc hardware? Is there a god .pit file or god rom that could work to make something happen? What should i try now?
This shows a successful flash which had no effect on the tablet afterwards
[URL]
View 1 Replies
View Related
Mar 25, 2010
I've got the rooted 2.1, easy. I've got all the java and adk and what not I got the flash_image and recovery.img. The command prompts all work fine till the last command, (I've tried 2 different chain of commands both work until a certain point).
adb shell mount -o rw,remount /dev/block/mtdblock3 /system
adb push recovery.img /sdcard
adb push flash_image /system/bin
adb shell chmod 755 /system/bin/flash_image
adb shell flash_image recovery /sdcard/recovery.img
(After this one it says it cannot find flash recovery or image, cant exactly remember.)
- Open the Terminal and copy and paste the following commands with the phone connected to your computer.
- adb shell [hit enter]
- su [hit enter]
- flash_image recovery /sdcard/recovery-RA-eris-v1.6.2.img (once again not found but I believe I followed correctly) this the end of commands the first half worked fine.
View 45 Replies
View Related
Oct 4, 2012
I try to understand android boot sequence on my JB (under CM10). I found some docs and there should be specific partitions (boot, recovery, system, cache, data).
My understanding of the boot sequence is now:
A) normal boot:
1) Power ON ->
2) bootloader ->
3) boot-partition where i flashed the kernel aka boot.img ->
4a) system-partition with the OS (libs, UI, etc) where i unpacked over CWM my customROM.zip ->
4b) data-partition, where i unpacked google-apps.zip and installed all the apps ->
4c) cache-partition with user data
B) recovery boot (adb reboot recovery):
1) Power ON ->
2) bootloader ->
3) recovery-partition with CWM where i may unpack all the .zip stuff to proper partitions, or restore from sdcard, etc.
Is this correct? I wonder, because i didn't installed CWM into recovery-partition. It cames from install of CM10 (fastboot -i 0xfce flash boot boot.img), so it must be in boot-partition and not in recovery?
So, next confusion: i looked up to /proc/mtd and i don't see neither boot nor recovery partition here:
Quote:
# cat /proc/mtd
dev: size erasesize name
mtd0: 19000000 00040000 "system"
mtd1: 00600000 00040000 "appslog"
mtd2: 06580000 00040000 "cache"
mtd3: 1a400000 00040000 "userdata"
I did a backup with CWM and loocked the data. There aren't boot, and recovery backups:
Quote:
# ls -lha /sdcard/clockworkmod/backup/2012-10-04.18.49.55/
d---rwxr-x 2 system sdcard_r 4.0K Oct 4 18:56 .
d---rwxr-x 3 system sdcard_r 4.0K Oct 4 18:49 ..
----rwxr-x 1 system sdcard_r 1.6K Oct 4 18:54 .android_secure.vfat.dup
----rwxr-x 1 system sdcard_r 54.6M Oct 4 18:55 cache.yaffs2.img
----rwxr-x 1 system sdcard_r 360.2M Oct 4 18:53 data.yaffs2.img
----rwxr-x 1 system sdcard_r 212 Oct 4 18:56 nandroid.md5
----rwxr-x 1 system sdcard_r 214.6M Oct 4 18:51 system.yaffs2.img
#
So, i think i didn't understand the boot sequence and partition schema corectly.
View 2 Replies
View Related
Apr 28, 2013
Rom Manager tells me "Goophone i5 does not have an officially supported ClockworkMod Recovery yet. Have you installed a ClockWorkMod recovery manually?"... If I say Yes it asks me to confirm Version 2.x or 3.x+. I don't know if a CWM was installed manually. What should I do?
I can't see a recovery file on the SD card.
View 1 Replies
View Related
Sep 10, 2010
note before attempting any of this that rooting does void your warranty. I also am not reponsible for any damage that is done to your phone but am more than willing to help you solve a problem in IRC. See my signature on how to get on #ally IRC channel. I do not actually use the Clockwork Recovery (i use drellisdees).
Guide to flashing roms on the LG Ally with screenshots. First off. Make sure your phone is rooted. If your phone is not rooted see the following options.
Option 1a: Universal 1 click root. (easy way) Universal Androot Beta
1b: z4root 1 click root http://forum.xda-developers.com/showthread.php?t=833953
2: Original Root Method (harder way) How to "root" the LG Ally.........
View 17 Replies
View Related
Apr 13, 2013
I tried flash cwm recovery.... it running a few second after that my phone was dead.... I try to turn on... cannot turn on.. juz have a vibrate and dead.
I think battery was empty... I try changed with another battery...still same... after that i try to recharge... cannot working to...
View 3 Replies
View Related
Mar 17, 2014
I did not brick a tablet without having a cwm installed first and a nandroid backup. The tablet is an allwinner a23 not in some peoples opinion worth a lot of effort to fix. We have an identical tablet with the same firmware. If I root and install a custom recovery on the unbricked tablet can that zip be flashed without a custom recovery? I have looked about a bit and there seems to be conflicting opinions on this. The only prob I can see is the stock recovery may not have the option to wipe the dalvik cache.
C5303
View 9 Replies
View Related
Nov 27, 2013
How to unbrick my one s. I can get into recovery but i cant do anything else. I have tried flashing multiple boot images from the bootloader but i get the same failed message every time i try to flash a rom. I dont have s off but i am rooted and supercid.
View 1 Replies
View Related
Nov 26, 2012
my device is galaxy ace s5830i..i have already rooted my device and used CW Recovery and taken a copy of my original system.i wanted to set up a custom rom i restarted and reset and deleted the cash then installed the rom.i think it was Retribution beta then i wanted to update to that custom rom (MindCR ICS) all i did i restarted my phone of course went into R mode and reset and deleted the cash then installed that next custom rom .
after installing completed when i rebooted it only gave me (samsung galaxy ace s5830i) logo and doesn't open the system when i restart it doesn't go into recovery or download mode it only gives me again the same logo.i used odin v 1.81 and the latest version it doesn't recognize the phone and i can't go into download mode.
View 1 Replies
View Related
Jan 21, 2013
so i just find a new way to reboot to stock recovery on samsung galaxy ace plus GT-S7500 without flashing another custom recoveru like cwm or something like that
many people say that we cant access the stock recovery on galaxy ace plus because it have some bugs or something else.. now i found the way how to do that
just follow the simple guide how to do that :
1. reboot it using volume + and volume - ~> home button ~> power button
2. click and hold both volume button then the home button then the power button..
3. if the phone gets turned on so u need to keep hold that button until the recovery showed up (when it showed up and its get turned off again so u need to hold all the button again until it get rebooted to recovery)
4.if u get rebooted all time its not a big problem again .. all u need is just hold all that button until the phone gets turned on and release the power off button and hold it again until u boot it on recovery mode.. and done u booted up on recovery mode (im not responsible if ur phone gets bootloop or something else)
View 3 Replies
View Related
Feb 25, 2012
When I got my phone at the end of last year I rooted it using a Chain-Fire kernel - v 4.2, I think. After flashing, it worked perfectly, since when I have flashed the old bootloader to get my USB Jig working to remove the yellow triangle and flashed a patch again to allow the USB Jig to reset the binary counter.
I have very much wanted to install and get the new Sky Go application working.
What I had to do was flash the Stock kernel for my Stock Rom - I have never messed with my Rom - it is Gingerbread 2.3.4 in a CPW phone here in the UK.
Doing the flash and installing Voodoo OTA (to temporarily hide my root) has been enormously successful
Now then to my query....
The original Chain-Fire mod v 4.2 installed CWM.
After of course cancelling the "hide root" function to show my phone as rooted once more, I went to do a backup, using CWM but it refuses to work. It says my kernel needs v 5.0. Obviously the Stock Rom I flashed to get Sky Go working has thrown CWM some what.
I have downloaded Rom Manager from the Market but this seems not to work either - it starts to work (reboots) but then halts with the following messages: -
E : failed to verify whole-file signature
E : signature verification failed
Installation aborted
What I would like is some way of installing a backup previously made before flashing the Stock kernal and also to make a fresh backup now.
View 3 Replies
View Related
Jun 29, 2013
I flashed + rooted (strangely in that order, which means I must have rooted my phone ages ago.. and then locked my bootloader after flashing..?)...
I do have Rom manager installed... but I don't quite recall how I ended up flashing the stock rom onto the phone..
Anyways, as I did seem to reset my phone, I upgraded all the apk packs and I'm pretty happy with the speed upgrade + ext2 internal space expansion.
As I now want to create a nandroid backup, so I can always come back to my current status, when I want a clean reinstall..!
My main question is that as I seem to have skipped creating a CWM recovery... if I do so now, will I loose all my data and go back to the basic stock rom?
The problem I'm facing right now is that I'm unable to boot into the recovery mode using either "adb reboot recovery" or the power on + vol buttons / menu button. (which means that I don't have the recovery mode installed.....)
So.... will I loose my current upgrades + phone settings (reset into factory mode), if I flash the recovery mode?
View 5 Replies
View Related
Jun 9, 2013
I am on twrp recovery version 2.1.3 and to upgrade to 2.5.0.0 I used the Google .im app but even after the message showing that recovery was flashed successfully, when I reboot into recovery I still see the 2.1.3 twrp only..So I tried flashing it with terminal emulator but it didn't work.This error shows up every time failed scanning partitions failed with error : - 1
I tried putting the .img file in the root folder as well but it didn't work..I tried naming the root of sd card as storage/emulated/legacy, storage/ emulated / 0, /sdcard, etc but it keeps on giving this error every single time!
View 1 Replies
View Related
Jan 9, 2013
So I was having a problem with my Optimus V (Virginmobile) and I couldn't send or receive texts. I did a factory restart thinking it would work but then found myself at the recovery menu. When I try to flash xionia_cwma_12518.6.zip it says E:cant find update script. When I try and flash CM7.2RC1_VM670-BobZhome-052012 it installs and when I reboot i get taken back to the recovery menu.
In short; My Virgin Mobile Optimus V is stuck in a recovery loop that I am unable to get out of due to an error while trying to flash ROMs/ Custom Recovery.
The error reads at the end of all attempts: E: Can't find update script.
View 1 Replies
View Related
Dec 13, 2013
I have a new ace 3 LTE S7275R. I tried installing CWM recovery found here: URL....I tried with odin 3.07 and 1.85Every time, odin shows success, but when trying to boot into recovery, the phone gets stuck at "recovery booting...."The phone is otherwise working...getting CWM to work? how can I return to stock recovery at least?
View 4 Replies
View Related
Oct 17, 2013
So I just got my S4 rooted and everything seems correct. I then installed Rom Manager so I could start demoing some of the ROMs out there. Went through all the steps to flash Rom manager as the recovery but I cannot get my recovery to go to CWM, it just keeps going to the stock android recovery. I have googled the crap out of this and am coming up with nothing. in fact I have written several android apps but this just does not work.
My device is a Verizon Samsung S4 model SCH-I545 running android version 4.2.2 Kernal: 3.3.0-690088se.infra@S0210-13#1
View 3 Replies
View Related
Mar 27, 2013
i wanted to upgrade my galaxy s2 g i9100 and since that time i hve not been able to use the phone again.
i tried rooting it but after that i can not boot recovery anymore all that comes on the screen is SAMSUNG GALAXY SII with a yellow triangle.even if i press the up volume key+home key+power nothing happens.
View 1 Replies
View Related
Apr 10, 2014
I have a Karbonn A6 phone given to me by my friend because it was locked. It's asking for gmail user/pass but he doesn't have it. I tried to boot into recovery mode using Power+Volume Up button but all I get is a white triangle with an exclamation mark in it. I can't seem to go beyond that. USB debugging was perhaps not enabled unless it was enabled by default. There is no camera button, only power and Volume Up/Down. What do I do?
I just need to get this phone working somehow. Is there a way to use a computer and a USB cable to get it running?
View 2 Replies
View Related
Sep 25, 2011
I have tried using rom manager, holding the power button and selecting reboot recorvery, and by holding the power button and x. Each way I see the white m twice then the phone just boots up. I am running cm7 7.0.3. I have only had the phone for a week, I am trying to wait for the vigor. It worked fine Friday when I flashed cm7
View 4 Replies
View Related
Oct 11, 2011
I'm on a Galaxy S2 running Gingerbread 2.3.4, my baseband version is I9100XXKI1 and my kernel version is 2.6.35.7-I9100XWKH4-CL487028root@DELL136 #2
Using Odin3 v1.85 and S2 Root. (Superoneclick kept freezing on me)
My aim is to install Cyanogenmod 7.1.
So far I started off by trying to flash it with XWKDD Insecure, which I believe is wrong? However after rooting it, I installed ClockworkMod Recovery, downloaded the ROM and tried installing it - which is where the problem started - I kept getting the error in recovery mode 'Invalid whole-file signature'.
It just wouldn't boot in to ClockworkMod Recovery.
So after some digging around I managed to find a file to flash to my device for the CWM Recovery mode, tried it, and it worked. However, I still couldn't install Cyanogenmod from my SDcard.
I tried it a few times, wiped/formatted a few times and ended up getting my device stuck in a bootloop.
So, I've managed to get it out of the boot loop, and started fresh...
I flashed it with XWKH4 Insecure, unrooted, rerooted etc.
I've downloaded CWM again, downloaded the Cyanogenmod again, tried installing it, and once again it's gone back into Androids recovery and failed to install because of the 'whole-file signature' and failing to verify it.
I did post this in Q&A as well, however it doesn't seem to be as popular a forum as this one, I'm not really looking to wait for days for a response.
View 9 Replies
View Related
Jul 3, 2012
I rooted my phone using Z4 then used Titanium Backup for backing up and then recovery. Now while rebooting into recovery mode the phone took a long time in booting so I removed the battery and tried to reboot. But the phone makes the signature sound and after that only displays the following word 'spice'.
View 2 Replies
View Related
Oct 17, 2013
i have a cheap alwinner a13 tablet (simmtronics xpad x720) from indian manufacturer. It is stuck at cwm recovery it countineously boots to cwm after restart.I have no backup stock rom. But i can sideload zip from adb or external ed. And not able to mount internal sd or wipe cache.
View 5 Replies
View Related
Mar 10, 2013
I just tried to install an custom rom at my Android, i unlocked it on HTCdev`s site, but i think i was a little fast with the DooMLoRD_v2_ROOT-zergRush-busybox-su.zip
I then bootet the phone into fastboot, and did the command fastboot flash boot boot.img, this worked very fine but now the phone wont boot.
I think maybe the phone is unlocked, but it is S-ON. I have tried diffrent recovery modes with the fastboot flash recovery recovery.img etc, but none of them are working.
Now im sitting with a phone that wont boot at all, what to do?
Is it possible to keep going on with the custom rom install, or can i resett the phone into the stock rom?
View 3 Replies
View Related
Aug 11, 2010
ok, so I put the PB31IMG file on my sdcard, and the dinc_ota. I changed dinc_ota to update. (I did not name the file update.zip.zip) I powered down, I entered bootloader, and it loaded the PB31IMG and whatever. then I hit volume down and selected recovery. this brought me to clockwork recovery. I noticed the isntructions said to boot into STOCK recovery. well, I like a dummy ignored that and tried to apply the update.zip thru clockwork.
This is what I got:
CODE:.......................
So, is this because I tried doing it through clockwork recovery? is it because I didn't apply the first OTA update we got? what does that mean exactly anyways? is it saying I need to install the leaked froyo ROM, and then update the radio? How do I boot into stock recovery and not clockworks recovery? does this count as applying the update.zip once, meening if I do it again I'll brick my phone? should I sell this thing and get a samsung flip phone because I'm too stupid to own a Dinc?
View 2 Replies
View Related
May 14, 2013
I have an Android tablet (Diablotek D2-721, very cheap I know, but it serves its purpose) that is stuck in a boot loop. The real problem here is that this device apparently does not have any sort of recovery mode and being in a boot loop means it does not get recognized by ADB or any firmware flashing software.
I researched all day yesterday perusing forum after forum but almost every single solution requires booting into recovery.
View 1 Replies
View Related
Jun 3, 2013
My EVO 3D (Sprint) is rooted and is on android version 2.3.4 and I believe it's not an android official release, this is how it was given to me. I'm trying to install CM10.1
I installed ClockworkMod 5.0.2.0 using ROM Manager and since then I haven't been able to boot into recovery mode. I can get into bootloader but not recovery. I've tried powering it on with the volume button down, using the recovery reboot option, and tried using "Reboot into Recovery" in ROM Manager, but I keep seeing the same thing. It boots with the HTC logo then goes black then at this point i believe I should be seeing recovery mode but instead I see the HTC logo again and then it just boots like normal. Is there something I did wrong and is there a way to get recovery to work again?
View 2 Replies
View Related
Oct 22, 2012
I've been trying to track down a solution to my problem, but every solution seems to contain a "Boot into recovery mode" line which I cannot do. I attempted to update a rom that I had installed, and now I am stuck at the google logo with the unlock icon. I cannot boot into recovery with the volume keys and power, and now I cannot figure out how to use adb to recover the phone, as it cannot recognize it.
Is there anyway I can access this phone while it is in this state from my computer and recover it somehow. I tried following leads that people have posted in other threads, but it seems like most suggestions involve "Use adb", yet every adb tutorial involves the phone being in recovery mode. I've tried to uninstall and reinstall drivers via Wug's Toolkit, but when I plug my phone in, I am not able to install the drivers properly. I try to run adb items through the console, yet it does not recognize my device.
Is there anyway to install the necessary software I need and recover my phone while I cannot get past the google logo screen?
I am using a verizon galaxy nexus
View 4 Replies
View Related
Nov 22, 2012
I got the cat /proc/mounts here -
Code:
root@android:/ # cat /proc/mounts
cat /proc/mounts
rootfs / rootfs ro,relatime 0 0
tmpfs /dev tmpfs rw,nosuid,relatime,mode=755 0 0
[code].....
View 6 Replies
View Related
Apr 9, 2014
I Have An Ainol Novo 7 Crystal Tablet..(Rooted With TWRP Recovery&Cyanogenmod 10.1 Installed).It Was Working Fine Till This Afternoon But I Don't Know What Happened Next..I Turned Off My Device And I Tried To Turn It On Again After Some Time But It Wasn't Booting...
I Don't Even See Any Boot Animation Or Android Logo That My Device Used To Display While Booting,The Screen Of My Device Lights Up Though..And I Can't Even Boot Into Recovery (I Have TWRP Installed),When I Try To Boot Into Recovery I Don't See The Android Logo That I Used To See But The Screen Of My Device Lights Up And Doesn't Boot Into Recovery.. I Tried Removing TWRP Recovery From My sd card And Booting Into Recovery But The Screen Lights Up For Like 5 Seconds And Then The Light Goes Off..
View 9 Replies
View Related