I followed the instructions in PC companion and after the last screen with disconnect the cable and boot up it started u fine but then nothing happens, this was an hour ago. Anyone had the same problem?
View 6 Replies
I have a rooted HTC Desire s, I did a software update through "phone, info, check for updates",(android 2.3.5 sense 3.0) now my phone wont boot, it's stuck on the HTC boot screen., I've tried updating from SD card (various custom stock roms) but I always get an error message.
Phone info:
-Revolutionary-
SAGA PUT SHIP S-OFF RL
HOOT-6. 98.1002
RADIO-38.02.00.11_M
eMMC-boot
Mar 10 2011, 14:58:38
I have last night updated my X10i through SE US to Android 2.1. Following from here I cannot get past the boot screen, it switches on, but stays blank and does not do anything else. I have tried to re-install / repair through SE US (PC Companion does not work in this case) to flash it once again, and also that did not help. It keeps telling me that everything is fine, and I should just switch on my mobile phone.
View 4 Replies View RelatedSo I have updated my phone through T-mobile yesterday after I received service message and the phone never got past the "samsung vibrant" screen, it stays here after it plays the welcoming melody. After that, it simply won't start. I have tried hard reboot, factory reset, nothing worked. Did this happen to some of you as well? Any ideas how to get my phone working again?
View 24 Replies View RelatedOnee the " official" fryo comes out will I have to flash to stock then update or can I just apply the update to my rooted phone?
View 6 Replies View RelatedI have a x10i, i brought from Hong Kong. but i am in Australia now with three network. so which country update will i get? when the update hits Hong Kong or Australia? and which date if anyone is awa.
View 2 Replies View RelatedI have an X10 Mini that when new was locked to the Orange UK network but I have since unlocked (but not unbranded) it and now use a different network. Which Android 2.1 update will I need? Generic, Orange or the new network provider? If it is the generic one will this also have the benefit of unbranding the phone and getting rid of Orange apps? If it is the Orange upgrade will the phone become locked to their network again and require unlocking again?I need the phone to stay unlocked for the future.
View 2 Replies View RelatedI updated the phone to 2.1 earlier, but it's still at 1.6... when I connected to PC Companion prior to the 'update' it said my phone was up-to date so I'm convinced I didn't actually update anything?
When should I be prompted that an update is available via PC Companion? because when I look in the phone settings and check for updates it says there's one available, but not on PCC?
I just upgraded my xperia to android 2.1 and immediatley after that my phone keeps on restarting. is this normal? or should i reinstall the update again?
View 1 Replies View RelatedSome of us in India are unable to update the phone via usb cable. release the 2.1 OTA (Over the Air) update.
View 9 Replies View Relatedso this may be a dumb question, but how do i update the boot loader or recovery. I'm using clockwork, and m assuming there's probably been an update for it. ive read about amon ra or something? sorry if I'm incorrect. I am just not sure if my phone is wiping dalvik correctly.
View 31 Replies View RelatedI've bought an Android Tablet a few months ago, there was an update recently, and my tablet stopped working, it doesn't pass the boot image. I don't know which model is my tablet (chinese tablet i guess). I've taken some pictures of the tablet.
View 2 Replies View RelatedI did the update here - [URL]...
And removed twrp. Obviously with my lack of knowledge I
made a mistake. Now I have stock recovery and the nabi freezes on the boot logo. getting it booting again or getting twrp back on.
So prior to manually installing the 2.2 update, I had a custom boot animation with sound. The update ran fine, no issues, and I knew I would have to re-install the custom boot animation files. However, I followed the same steps as I did prior to 2.2 (see below), and again, no errors. After reboot, I'm still seeing the Sprint 4G boot screen. Can anyone else confirm? Looks to me like it's been locked down.
From XDA:
adb push bootanimation.zip /data/local
adb push android_audio.mp3 /data/local
adb reboot
I just did the OTA update on my droid x it downloaded and restarted went through the whole process and restarted again. now it wont load past the moto logo . iv been waiting for a hour! i just pulled the battery and that didn't help either.
View 3 Replies View RelatedI've been trying to root my Nook Tablet to CM10 unsuccessfully. I found this [URL]..... which led me to believe that downgrading to the 1.4.0 update would be useful.
I followed the link from this, [URL] ..... and downloaded the .zip and put it on an mSD. I proceeded to place it in the tablet, turned it on, and the update went through and my screen went black. After a minute or so I hit the power on button, and nothing happened. Nothing works on it now. I've tried hitting the power button for 20+ seconds then the 2 seconds, as well as the power + N button. The screen remains black. I can connect the nook to my computer and the power cable lights up, as well as when it's placed on the wall.
The Nook Tablet (it's a BNTV250) isn't turning on.
i was trying to update my SGS2 to ICS by myself using Odin, but something went wrong and now i can not get the phone start at all . and i get an icon for a phone and a PC and a warring triangle to show me that the connection is lost
View 6 Replies View RelatedI received an OTA update, however, it is continually failing upon reboot. I discovered that I can't get my RAZR M into recovery.
I would flash TWRP recovery, however, I then would no longer receive OTA updates.
Is it possible that I may have 'locked' myself out of recovery?
My M is rooted; I've been able to get to recovery previously, though do I need to perm unroot my M?
Is it possible to re-flash stock recovery? If so, how?
My phone:
Moto Droid RAZR M
Stock ROM, rooted
Stock recovery
BusyBox 1.21.1
SuperSu
Voodoo OTA Rootkeeper
No major issues, but my startup screen does seem to take a LOT longer before the phone actually loads, and once it does none of my buttons/widgets appear for another 5-10 seconds. Additionally, once in a while when exiting a program none of the buttons are on the home screen for 3-5 seconds, and sometimes a Force Close error pertaining to the home activity will pop up ... anyone else experience anything similar, or even just notice a longer boot time?
View 1 Replies View Related, i followed the directions for updating the droid to 2.1. Now stuck in a boot loop. The firmware updated fine and didn't indicate a failure, after i updated i did the reboot from the menu. I've reflashed 2-3 times now and it does not come back, and i've pulled the battery more than a few times.
View 5 Replies View RelatedI've noticed my Nexus acting a bit buggy since the 2.2.1 update. Lots of force closes with the launcher. (which is exactly why I shredded and burned my old MyTouch for). After FINALLY getting a THIRD 16 gig card, after the other two got "damaged" costing me so far 25-30 gigs of content, I loading it up with movies and songs for my vacation. I go to reboot and it keeps looping the boot animation but wont boot up. Getting really close to kissing Android good bye as I've had NOTHING but bugs and damaged SD cards and an overall terrible user experience for a year and a half with two phones. I know we're only really two years into development but how much longer do we have to wait for a finished product that I don't have to keep making excuses for? More to the point WTF is going on with the boot loader on my phone and how do I fix it?
View 2 Replies View RelatedAm I correct that the Ally has the same build as the Nexus One ERE27. So does anyone know how to get into the boot recovery menu to try and install the 2.2 update?
View 1 Replies View RelatedI have an unlocked HTC Sensation and when i updated it when it was rebooting it got stuck at the htc screen for ages soo i took the battery out and now it gets stuck at the boot screen with the htc on it I Really am unclear
View 1 Replies View RelatedI had my Galaxy Pocket rooted and got the Jellyblast v3 rom, it was doin fine until I checked on the app OTA and check for update, a new update appeared which is the Nemesis 2.5 Hybrid-Holo Editon. It asked me to download it and so I did. When it was done, it asked me if I wanted to install it and so I did, and rebooted. Later I noticed that it was already boot looping. I tried pulling the battery off and to clockwork mode, with the proper procedure..the holds and presses, but still it just kept boot looping. Tried to connect it to the PC using the USB chord and yet it just shows the charging icon and sooner it turns to white. I tried Kies but still it turned white screen all over again; no device found.
View 8 Replies View RelatedI tried to force ics update to my phone and it is stuck on the big Motorola M screen. ive tried to flash the update just like you would a rom and it didn't work. it was my only option cause the guide i was following was for a pc and I own a mac so the utility provided wouldn't open on my computer. after it didn't work i tried a factory reset but that hasn't done anything. what can i do? the sd card wont mount on my comp so i cant put anything on that.
View 1 Replies View RelatedI was rooted and and had lagfix on my fascinate. Then I decided to download the new update from verizon today. After the update the update screen kept on popping up even after I already installed it. Then I found out that my apps that require root like autokiller and setcpu did not work anymore even though I still hade the superuser app. So I rooted my phone again restarted it and the apps worked again then I decided I wanted to do the clockworkmod installation thing so I could make my phone flashable, the instructions recommended that i remove lag fix so I took my phone plugged it into the pc and went to my ryan lagfix folder whatever on my desktop and clicked on the unlagfixme.bat thing and at the end it had some errors or something even mentioning the Innopath Activecare in it which was for some reason probably why it didnt work. So I decided to try it again and it didnt work. Then I rebooted the phone and I saw the samsung logo and then black screen!
View 1 Replies View RelatedI am trying to get a friends Nexus 7 up and running. I recently rooted it and installed the custom recovery using my Mac with this guide while the tablet was on 4.3. All was well, but then my friend was given the option to install the 4.4 Kitkat update. After the update, the tablet has been unable to boot - it simply hangs at the startup animation. I am able to enter the recovery boot loader, and enter options to restore from a .zip, however I have no way of accessing the tablet's memory from my computer to put the original operating system back on it- although I think it could be done from Terminal, I am not well versed in command prompts.
View 3 Replies View RelatedIn my phone I went to settings > about phone > software update > update now.It told me there is an update for my phone and I should update it using SE PC companion. So I opened PC companion, connected phone, mounted it and the PC companion told me there is a new update for my phone. I pressed update, followed all the instructions on phase 2. Then PC companion entered phase 3 of the update and imidiately gave me the message "There are no updates available for your phone". So now it remained 1.6 and when I try to repair it gives me the same message as stated above.Now the PC Companion, 'settings > about phone > software update > update now' and even SE update service tell me my phone is up to date. I have Windows XP, and I live in Israel if it matters. I checked my SI and it is 1232-4285 and it is in the list of kits that have already gotten the update. What do I do?
View 3 Replies View RelatedThe version of the software that is most current is version 6 (the phone shipped with version 3).
To ascertain version: Go to Dialer/Hit Star/#9999#
You will see the PDA; Phone; and Software Version numbers in this section
The T939xxxx6 for PDA AND PHONE and then
Software Version - ending in .006 on the last line.
I was told that the reason that I keep seeing the "No update file exists" message when I check "update firmware" is because I have the latest version.
At some point my phone was updated without giving me a message. I did notice the red and blue arrows yesterday. But there was no message. My SD card mounted and dismounted on its own and gave an error message, and then all references to the error and SD card disappeared.
If your phone is/has exhibited this sort of behavior, you may already have the update.
I can see there is some old threads about auto updates, but I cant find any answers.
I wonder if there is a way to auto update all my applications. I take too much time go to marked, downloads and manually update 1 by 1..