I tried to flash CWM Recovery but when the 'confirm your device' menu popped up, my phone wasn't there so i just selected the first one on the list. Now when i try to reboot into recovery, nothing happens. It just boots up normally. how to either flash stock recovery or a custom recovery that will work?
View 1 Replies
First off you must have a 100% stock rom and be rooted.
View 24 Replies View RelatedSo now that we have the wireless hotspot option I'm done with root. Especially considering I haven't been able to get weather updates for the past two weeks and my phone restarts when trying to install new apps.
I'm ready to just set everything back to stock and go back to getting OTAs. I know I can't relock the phone.
My problem is, I have the stock recovery image however whenever I flash it and try to go into recovery it shows me this screen with a little android guy and a big triangle with an exclamation point inside. And then it sits there until I do a battery pull.
I've tried this with the stock recovery from a couple different sources MD5 checks are all good.
I'm looking at sending my phone back in to TMO, but I don't want there to be a trace of anything. I rooted via the update.zip and flashed Clockwork, but haven't flashed any other roms or anything.
I was curious, is there a way to flash back to the stock recovery? Or would uninstalling Rom Manager, then unrooting via terminal, have the same effect?
is there anyway to compile cwm on windows i have cygwin installed
View 4 Replies View RelatedI have a Nabi 2 tablet that I've rooted, installed TWRP, and flash the gapps and a few other tweaks to. It's about to go in for an RMA since the USB and charging ports are both broken. The problem in the USB port is that one of the pins got bent - I don't know how, it looks like the conductor somehow got peeled back off of the plastic. The point is, I have no USB access to the device.
In order to pass the inspection for the RMA, I need to have it stock I can flash the stock ROM by putting it on the SDCard in my laptop then transferring that to the device and flashing it through TWRP. The question I have, though, is whether I can flash the stock recovery with ADB access to it. Every thread I've been able to uncover so far about flashing a recovery requires ADB access to issue the "adb fastboot flash" command. Is there another way to do this?
My phone is on CM9.. i want to revert it in stock rom. my computer doesnt detect my Phone when emergency mode even i have drivers installed.
Is there a way to flash my Phone with the CWM recovery with the stock rom? .kdz file?
I have myTab 7 tablet and it's not officially supported device for any recovery. Does it matter? Can I flash any custom recovery e.g. CWM touch recovery or TWRP? Won't it destroy my tablet?
View 1 Replies View Related1. Can recovery flash bootloader?
From this link====>[URL] ....., I think it can do that. But I'm not sure.
2. Can recovery flash recovery partition itself?
I think it can not do this. Not confirm that.
3. We know in update.zip, boot.img is corresponding boot partition, but why system is a folder, not system.img? There is a system partition also.
4. While OTA upgrade system, why the update package downloaded under /cache path? Can we change it to sdcard?
5. Most important, what exactly update-script do things under recovery mode? How the command executed?
BTW, there are other questions, but not related to Recovery Mode.
1. How can I see the flash partitions? I know to use the command cat /proc/mtd, but as Samsung, it use emmc flash, while I type that command, no results printed. How to see?
2. About userdata partition, we know that when first run android OS, system will copy files from /system to /data, but does it do it every time that we turn on the phone or just do it once after the first booting after we update our system?
I hit the top button. Flash Clockworkmod recovery or what ever it said. I then backed up my Current ROM. I then downloaded Cyanogen v6.0.0 cr2. It downloaded and rebooted my phone. But It went to a screen with a Triangle w/ exclamation and a phone under it. I then hit the up vol button and camera, and now I'm at the Android system recovery page and I don't know what to do next. These are my options reboot system now apply sdcard:update.zip wipe data/factory rest wipe cache partition wipe base band data. I did click to backup current ROM and wipe data and cache.
View 38 Replies View RelatedIts rooted, I cant get clockwork recovery to install/flash.
View 5 Replies View RelatedI have an AT&T SGS4 with a melted USB port so there is no way for me to use fastboot or Odin to flash bootloaders, etc. Is it possible to flash a Samsung factory bootloader through recovery?
What I am trying to accomplish:
I am on Touchwiz 4.3 and the 4.4.2 KK release was leaked in our forum. I used the dsixda kitchen to break it down and made a ROM out of it that successfully flashed in recovery but kernel panics at the AT&T splash boot screen because the RAMdisk doesn't match the bootloader version. So I need to upgrade the bootloader to the 4.4.2 version so it will boot.
I unpacked the RAMdisk and there is nothing in any of the init.xx files that points to the bootloader. I even used a hex editor to look at the init binary which references the bootloader but there was nothing in there that I could change (from what I saw).
just I want to know is it possible to flash recovery IMG without root access ?
View 1 Replies View RelatedI need to flash a file that locks the bootloader. It contains Aroma Installer. Is there a way to flash it without booting into recovery? Something linke an app that flashes the file directly from the phone?
View 9 Replies View RelatedI used comand
fastboot flash recovery recovery.img
but It not working. Drivers is Full.
I am trying flash the latest recovery mod but it's stuck on 100% don't know what to do
View 6 Replies View RelatedI have been lucky enough to been given a Huawei P1 and a P1 XL.
I have managed to root it successfully which is great but the rom on both does not come with Google Apps Suite.
I know it's possible to flash the gapps once rooted and you have a recovery on Huawei's as I have done this on my honour.
The Chinese recovery available for P1 doesn't work on my P1 or XL.
Is there any way to flash the gapps packaged without a recovery or to do it manually?
Now I have G-tide E77 Chinese android mobile
How I can root it and flash cwm recovery ...
I'm using a Tecno T3 running android 2.3.5, and using a qualcomm msm7627a chipset, I've tried rooting it using one click methods but to no avail. so I came across a thread that says If I flash a cwm recovery, I can use universal gingerbread root to root the phone. I Dont know how to port cwm to my device, so I decided to use the cwm for the karbonn a7+ which uses the same chipset. will it work?
View 4 Replies View Relatedok, so I put the PB31IMG file on my sdcard, and the dinc_ota. I changed dinc_ota to update. (I did not name the file update.zip.zip) I powered down, I entered bootloader, and it loaded the PB31IMG and whatever. then I hit volume down and selected recovery. this brought me to clockwork recovery. I noticed the isntructions said to boot into STOCK recovery. well, I like a dummy ignored that and tried to apply the update.zip thru clockwork.
This is what I got:
CODE:.......................
So, is this because I tried doing it through clockwork recovery? is it because I didn't apply the first OTA update we got? what does that mean exactly anyways? is it saying I need to install the leaked froyo ROM, and then update the radio? How do I boot into stock recovery and not clockworks recovery? does this count as applying the update.zip once, meening if I do it again I'll brick my phone? should I sell this thing and get a samsung flip phone because I'm too stupid to own a Dinc?
First off let me say that I was wrong about this issue. Its not an issue with Easy root it is just something built into android. So I apologize to anyone I argued this subject with but specifically Patch. Its also not an issue with rom manager. This applys to users that after flashing a custom recovery they can boot into it once but the next time you try to boot into recovery it has reverted to stock.
This mostly happens to users of easy root or users that use my guide for rooting using Linux
So for the fix.
Download this file and place it in the root of your sd card.
http://dl.dropbox.com/u/7223192/install-recovery.sh
Download Terminal Emulator from the market. The one by the dev Jack Palevich.
Open it and type the following commands.
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock4 /system
dd if=/sdcard/install-recovery.sh of=/system/etc/install-recovery.sh
chmod 550 /system/etc/install-recovery.sh
sync
after that just flash the custom recovery of your choice and you should be good to go.
I tested this on my phone and another user tested it for me and it worked for both of us. If anyone has an issue let me know. This issue is so sporadic that its hard to have people test the fix.
how to make cwm recovery for a new stock rom... means which files i have to compile?
View 6 Replies View RelatedI've already rooted my phone using the Framaroot method. (OS is JB 4.2.2)
Now now, i want to backup my stock recovery and my stock ROM.
I know i can backup my stock ROM using CWM recovery, but if i do that, i will lose my stock recovery.
So first i have to backup my recovery somehow, and then i can install CWM recovery and then use any custom ROM i want.
i have tried every single methods to pull stock recovery but i am not able to pull it i don't know why. i have tried every possible adb commands but not working
View 3 Replies View RelatedI'm a newbie for Android world. So i saw that several forums members posted " i need stock recovery IMG". What is the mean and what is the "Android stock recovery IMG".
View 6 Replies View RelatedI would like to do OTA update my htc desire vc but CWM does not work during update. It say "status error 7".
Therefore, I need "htc desire vc stock recovery" for OTA update.And then, how to do OTA update without stock recovery?
Where I can find stock recovery for HTC explorer? A310e
View 7 Replies View Relatedi have this HTC V9899 from china, i think this is not real htc, but don't know this is cloning from which model, it looks like rezound but the rear camera is in center.you can search in google "htc v9899 cdma gsm".there is two model of v9899, the cdma-gsm and gsm 4g.the 4g version is clone to rezound, very same.i have the cdma-gsm version.
the phone specification: dual on dual standby cdma evdo rev A and gsm 2g, 1 ghz processor, 512 ram and 512 rom, adreno 200, 4.3" screen, 960x540 resolution, amoled screen, 8mp rear camera with auto focus and flashlight, front camera, ics 4.0.4
i got this phone already root, and i want to learn how to cock rom, so to backup the rom, i learn from threads that i need clockworkmod to backup and install rom, and the easieast way is to install rom manager.
so i install rom manager, and need to install cwmr, some phone list show up, i try to flash it but none work, i try many model and so far the recovery screen just show logo and hanging.
i have novo7 tool that can flash recovery.img from sdcard, i have try many recovery.img and none work too.the bad thing is i didn't backup stock recovery.img cause i don't know how.the stock revocery is e3 system recovery.the phone work fine and rooted.just when i go to recovery by pressing power with vol up button, the phone just show verizon logo and hanging.
i still can access adb with my computer and my phone with power button and vol down.how can i install clockworkmod recovery for this phone? and if can't, how can i restore stock recovery.
Is it possible to flash new ROM in TWRP recovery from internal storage without using PC. I moved new ROM to my phone and i can see it in TWRP but is it safe to install it like that? Should i move new ROM in some specific folder first or not?
View 1 Replies View RelatedI recently bought a Pearl Touchlet X10 quad core (PX-8880-675) tablet, but it was full of mods and when i plugged in the charger i received the "plugged in, not charging" message. So i started to clean up the ROM. Finally it showed charging, but now i really messed it up, beacuse now it is not booting. The tablet was not factory software, another tablet software on it that has a volume rocker. To start the flash mode i need the volume up button, but this version of tablet does not have this button. I tried the home button version, but it is not working because of the different firmware.
Here's the thing:The tablet always starts recovery mode, no screen, but adb working. When i type "ls /dev/block" in ADB shell it shows loop0-loop7 and nandf, so it is not seeing the nand I have seen other forums that when I type "dd if=/dev/zero of=/dev/block/nanda" it will erase the nand, and the tablet is force booting into fel mode (flash mode), but it not erasing beacuse the recovery is not for this tablet and it not seeing the nand.